d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
db785d3199
freebsd-nq/sys/boot/i386/boot0/Makefile

85 lines
2.7 KiB
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Install in /boot.
1998-10-05 19:20:36 +00:00
Thanks to David's patches, we can now simplify these makefiles further, and just use PROG directly (without FILES). Suggested by: bde
2004-04-28 21:31:21 +00:00
PROG?= boot0
STRIP=
BINMODE=${NOBINMODE}
NO_MAN= has been deprecated in favor of MAN= for some time, go ahead and finish the job. ncurses is now the only Makefile in the tree that uses it since it wasn't a simple mechanical change, and will be addressed in a future commit.
2014-04-13 05:21:56 +00:00
MAN=
Thanks to David's patches, we can now simplify these makefiles further, and just use PROG directly (without FILES). Suggested by: bde
2004-04-28 21:31:21 +00:00
SRCS= ${PROG}.S
boot0 is a booteasy (boot manager) workalike with EDD support.
1998-10-05 10:08:37 +00:00
This commits brings in a lot of documentation and some enhancement of the boot0.S code, with a number of compile-time selectable options, the most interesting one being the ability to select PXE booting. The code is completely compatible with the previous one, and with the boot0cfg program. Even the actual code is largely unmodified, with only minor rearrangements or fixes to make room for the new features. The behaviour of the standard build differs from the previous version in the following, minor things: + 'noupdate' is the default, which means the code does not write back the selection to disk. You can enable the feature at runtime with boot0cfg, or changing the flags in the Makefile. + a drive number of 0x00 (floppy, or USB in floppy emulation) is now accepted as valid. Previously, it was overridden with 0x80, meaning that the partition table coming from the media was used to access sectors on a possibly different media. You can revert to the previous mode building with -DCHECK_DRIVE, and you can always use the 'setdrv' option in boot0cfg + certain FAT or NTFS partitions are listed as WIN instead of DOS. + the 'bel' character on a bad selection is replaced by a '#' to make it clear that the system is not hang even if the machine does not have a speaker. This can be reverted back at compile time, or at runtime with an upcoming boot0cfg option. Additional features are available as compile time options, and may be become the default if deemed useful. In particular: + INT18/PXE boot (make -DPXE) This option enables booting through INT 18h (which on certain BIOSes can be hooked to PXE) by pressing F6. There is unfortunately no room to print the additional menu option. Also, to make room for the code, the 'Default: ' string is changed to 'Boot: ' + print current drive number (make -DTEST) Prints a line indicating the current drive number. This is useful to figure out what is going on for machines/bioses which remap drives in sometimes surprising ways. + disable numeric keys in console mode (make -DONLY_F_KEYS) Not really a significant option, but it is needed to make room for the -DTEST mode. + disable floppy support (make -DCHECK_DRIVE) Revert to the old behaviour of only accepting 0x80 and above as valid drive numbers. MFC after: 6 weeks
2008-12-02 14:57:48 +00:00
# Additional options that you can specify with make OPTS="..."
# (these only apply to boot0.S)
#
Another, hopefully final set of changes to boot0 and boot0cfg. boot0.S changes: + import a patch from Christoph Mallon to rearrange the various print functions and save another couple of bytes; + implement the suggestion in PR 70531 to enable booting from any valid partition because even the extended partitions that were previously in our kill list may contain a valid boot loader. This simplifies the code and saves some bytes; + followwing up PR 127764, implement conditional code to preserve the 'Volume ID' which might be used by other OS (NT, XP, Vista) and is located at offset 0x1b8. This requires a relocation of the parameter block within the boot sector -- there is no other possible workaround. To address this, boot0cfg has been updated to handle both versions of the boot code; + slightly rearrange the strings printed in the menus to make the code buildable with all options. Given the tight memory budget, this means that with certain options we need to shrink or remove certain labels. and especially: make -DVOLUME_LABEL -DPXE the default options. This means that the newly built boot0 block will preserve the Volume ID, and has the (hidden) option F6 to boot from INT18/PXE. I think the extra functionality is well worth the change. The most visible difference here is that the 'Default: ' string now becomes 'Boot: ' (it can be reverted to the old value but then we need to nuke 1/2 partition name or entries to make up for the extra room). boot0cfg changes: + modify the code to recognise the new boot0 structure (with the relocated options block to make room for the Volume id). + add two options, '-i xxxx-xxxx' to set the volume ID, -e c to modify the character printed in case of bad input PR: 127764 70531 Submitted by: Christoph Mallon (portions) MFC after: 4 weeks
2008-12-03 14:53:59 +00:00
# -DVOLUME_SERIAL support volume serial number (NT, XP, Vista)
This commits brings in a lot of documentation and some enhancement of the boot0.S code, with a number of compile-time selectable options, the most interesting one being the ability to select PXE booting. The code is completely compatible with the previous one, and with the boot0cfg program. Even the actual code is largely unmodified, with only minor rearrangements or fixes to make room for the new features. The behaviour of the standard build differs from the previous version in the following, minor things: + 'noupdate' is the default, which means the code does not write back the selection to disk. You can enable the feature at runtime with boot0cfg, or changing the flags in the Makefile. + a drive number of 0x00 (floppy, or USB in floppy emulation) is now accepted as valid. Previously, it was overridden with 0x80, meaning that the partition table coming from the media was used to access sectors on a possibly different media. You can revert to the previous mode building with -DCHECK_DRIVE, and you can always use the 'setdrv' option in boot0cfg + certain FAT or NTFS partitions are listed as WIN instead of DOS. + the 'bel' character on a bad selection is replaced by a '#' to make it clear that the system is not hang even if the machine does not have a speaker. This can be reverted back at compile time, or at runtime with an upcoming boot0cfg option. Additional features are available as compile time options, and may be become the default if deemed useful. In particular: + INT18/PXE boot (make -DPXE) This option enables booting through INT 18h (which on certain BIOSes can be hooked to PXE) by pressing F6. There is unfortunately no room to print the additional menu option. Also, to make room for the code, the 'Default: ' string is changed to 'Boot: ' + print current drive number (make -DTEST) Prints a line indicating the current drive number. This is useful to figure out what is going on for machines/bioses which remap drives in sometimes surprising ways. + disable numeric keys in console mode (make -DONLY_F_KEYS) Not really a significant option, but it is needed to make room for the -DTEST mode. + disable floppy support (make -DCHECK_DRIVE) Revert to the old behaviour of only accepting 0x80 and above as valid drive numbers. MFC after: 6 weeks
2008-12-02 14:57:48 +00:00
# -DSIO do I/O using COM1:
# -DPXE fallback to INT18/PXE with F6
# -DCHECK_DRIVE enable checking drive number
# -DONLY_F_KEYS accept only Fx keys in console
# -DTEST print drive number on entry
#
Another, hopefully final set of changes to boot0 and boot0cfg. boot0.S changes: + import a patch from Christoph Mallon to rearrange the various print functions and save another couple of bytes; + implement the suggestion in PR 70531 to enable booting from any valid partition because even the extended partitions that were previously in our kill list may contain a valid boot loader. This simplifies the code and saves some bytes; + followwing up PR 127764, implement conditional code to preserve the 'Volume ID' which might be used by other OS (NT, XP, Vista) and is located at offset 0x1b8. This requires a relocation of the parameter block within the boot sector -- there is no other possible workaround. To address this, boot0cfg has been updated to handle both versions of the boot code; + slightly rearrange the strings printed in the menus to make the code buildable with all options. Given the tight memory budget, this means that with certain options we need to shrink or remove certain labels. and especially: make -DVOLUME_LABEL -DPXE the default options. This means that the newly built boot0 block will preserve the Volume ID, and has the (hidden) option F6 to boot from INT18/PXE. I think the extra functionality is well worth the change. The most visible difference here is that the 'Default: ' string now becomes 'Boot: ' (it can be reverted to the old value but then we need to nuke 1/2 partition name or entries to make up for the extra room). boot0cfg changes: + modify the code to recognise the new boot0 structure (with the relocated options block to make room for the Volume id). + add two options, '-i xxxx-xxxx' to set the volume ID, -e c to modify the character printed in case of bad input PR: 127764 70531 Submitted by: Christoph Mallon (portions) MFC after: 4 weeks
2008-12-03 14:53:59 +00:00
OPTS ?= -DVOLUME_SERIAL -DPXE
This commits brings in a lot of documentation and some enhancement of the boot0.S code, with a number of compile-time selectable options, the most interesting one being the ability to select PXE booting. The code is completely compatible with the previous one, and with the boot0cfg program. Even the actual code is largely unmodified, with only minor rearrangements or fixes to make room for the new features. The behaviour of the standard build differs from the previous version in the following, minor things: + 'noupdate' is the default, which means the code does not write back the selection to disk. You can enable the feature at runtime with boot0cfg, or changing the flags in the Makefile. + a drive number of 0x00 (floppy, or USB in floppy emulation) is now accepted as valid. Previously, it was overridden with 0x80, meaning that the partition table coming from the media was used to access sectors on a possibly different media. You can revert to the previous mode building with -DCHECK_DRIVE, and you can always use the 'setdrv' option in boot0cfg + certain FAT or NTFS partitions are listed as WIN instead of DOS. + the 'bel' character on a bad selection is replaced by a '#' to make it clear that the system is not hang even if the machine does not have a speaker. This can be reverted back at compile time, or at runtime with an upcoming boot0cfg option. Additional features are available as compile time options, and may be become the default if deemed useful. In particular: + INT18/PXE boot (make -DPXE) This option enables booting through INT 18h (which on certain BIOSes can be hooked to PXE) by pressing F6. There is unfortunately no room to print the additional menu option. Also, to make room for the code, the 'Default: ' string is changed to 'Boot: ' + print current drive number (make -DTEST) Prints a line indicating the current drive number. This is useful to figure out what is going on for machines/bioses which remap drives in sometimes surprising ways. + disable numeric keys in console mode (make -DONLY_F_KEYS) Not really a significant option, but it is needed to make room for the -DTEST mode. + disable floppy support (make -DCHECK_DRIVE) Revert to the old behaviour of only accepting 0x80 and above as valid drive numbers. MFC after: 6 weeks
2008-12-02 14:57:48 +00:00
CFLAGS += ${OPTS}
# Flags used in the boot0.S code:
# 0x0f all valid partitions enabled.
# 0x80 'packet', use BIOS EDD (LBA) extensions instead of CHS
# to read from disk. boot0.S does not check that the extensions
# are supported, but all modern BIOSes should have them.
# 0x40 'noupdate', disable writing boot0 back to disk so that
# the current selection is not preserved across reboots.
# 0x20 'setdrv', override the drive number supplied by the bios
# with the one in the boot sector.
# Default boot flags:
A number of small changes to make the 'save choice to disk' safer, and re-enable it as default. In particular: + re-enable the 'update' flag in the Makefile (of course!); + commit Warner's patch "orb $NOUPDATE,_FLAGS(%bp)" to avoid writing to disk in case of a timeout/default choice; + fix an off-by-one count in the partition scan code that would print the wrong name for unknown partitions; + unconditionally change the boot prompt to 'Boot:' instead of 'Default:' to make room for the extra code/checks/messages. Some of the changes listed below are also made to save space; + rearrange and fix comments for known partition types. Right now we explicitly recognise *BSD, Linux, FAT16 (type 6, used on many USB keys), NTFS (type 7), FAT32 (type 11). Depending on other options we also recognise Extended (type 5), FAT12 (type 1) and FAT16 < 32MB (type 4). + Add an entry "F6 PXE" when the code is built with -DPXE (which is a default now). Technically, F6 boots through INT18, so the prompt 'PXE' is a bit misleading. Unfortunately the name INT18 is too long and does not fit in - we could use ROM perhaps. The reason I picked 'PXE' is that on many (I believe) new systems INT18 calls PXE. Apart from the choice of the name for PXE/ROM/INT18, this should close pending issues on the 1-sector boot0 code and we should be able to move the code to RELENG_7 when it reopens. No boot0cfg changes are necessary. MFC after: 3 weeks
2008-12-30 09:40:50 +00:00
BOOT_BOOT0_FLAGS?= 0x8f
Make configurable (a) whether to use int 0x13 extensions; (b) timeout value. Ignore failure to update mbr sector. Disable interrupts while using extended registers. Default to F1 not F2.
1998-10-19 19:13:53 +00:00
Unrevert revision 1.12. Revision 1.14 backed this out saying it was backing out the 1024 sector boot0, but revision 1.12 had nothing to do with that. Instead, it documented various compile time options for boot0 and allowed them to be overridden via make.conf or options on the make command line.
2002-01-10 21:40:33 +00:00
# The number of timer ticks to wait for a keypress before assuming the default
# selection. Since there are 18.2 ticks per second, the default value of
# 0xb6 (182d) corresponds to 10 seconds.
BOOT_BOOT0_TICKS?= 0xb6
# The base address that we the boot0 code to to run it. Don't change this
# unless you are glutton for punishment.
BOOT_BOOT0_ORG?= 0x600
boot0 is a booteasy (boot manager) workalike with EDD support.
1998-10-05 10:08:37 +00:00
Allow BOOT_BOOT0_COMCONSOLE_SPEED to be derived from BOOT_COMCONSOLE_SPEED at compile time.
2005-04-25 17:41:35 +00:00
# Comm settings for boot0sio.
# Bit(s) Description
# 7-5 data rate (110,150,300,600,1200,2400,4800,9600 bps)
# 4-3 parity (00 or 10 = none, 01 = odd, 11 = even)
# 2 stop bits (set = 2, clear = 1)
# 1-0 data bits (00 = 5, 01 = 6, 10 = 7, 11 = 8)
.if !defined(BOOT_BOOT0_COMCONSOLE_SPEED)
BOOT_COMCONSOLE_SPEED?= 9600
.if ${BOOT_COMCONSOLE_SPEED} == 9600
BOOT_BOOT0_COMCONSOLE_SPEED= "7 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 4800
BOOT_BOOT0_COMCONSOLE_SPEED= "6 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 2400
BOOT_BOOT0_COMCONSOLE_SPEED= "5 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 1200
BOOT_BOOT0_COMCONSOLE_SPEED= "4 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 600
BOOT_BOOT0_COMCONSOLE_SPEED= "3 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 300
BOOT_BOOT0_COMCONSOLE_SPEED= "2 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 150
BOOT_BOOT0_COMCONSOLE_SPEED= "1 << 5 + 3"
.elif ${BOOT_COMCONSOLE_SPEED} == 110
BOOT_BOOT0_COMCONSOLE_SPEED= "0 << 5 + 3"
.else
BOOT_BOOT0_COMCONSOLE_SPEED= "7 << 5 + 3"
.endif
.endif
Allow one to specify the com port settings for boot0sio.
2004-01-06 18:46:35 +00:00
- Properly merge boot0sio.s and boot0.s into boot0.S. boot0sio.s was repo-copied to boot0.S. - Rename boot0ext.s to boot0ext.S, to stay consistent with other preprocessed asm files around here, and for better portability. Repocopied by: joe
2004-04-28 20:49:17 +00:00
CFLAGS+=-DFLAGS=${BOOT_BOOT0_FLAGS} \
-DTICKS=${BOOT_BOOT0_TICKS} \
-DCOMSPEED=${BOOT_BOOT0_COMCONSOLE_SPEED}
boot0 is a booteasy (boot manager) workalike with EDD support.
1998-10-05 10:08:37 +00:00
Use -Wl,-N instead of the undocumented -N option for GCC. GCC forwards the -N flag directly to ld. This flag is not documented and not supported by (for example) Clang. Just use -Wl,-N. Submitted by: Pawel Worach
2010-06-03 17:42:32 +00:00
LDFLAGS=-e start -Ttext ${BOOT_BOOT0_ORG} -Wl,-N,-S,--oformat,binary
boot0 is a booteasy (boot manager) workalike with EDD support.
1998-10-05 10:08:37 +00:00
Temporary precaution measure until repocopy requests are processed: don't forget to clean generated .s sources.
2004-04-28 16:16:16 +00:00
.include <bsd.prog.mk>
Define several extra macros in bsd.sys.mk and sys/conf/kern.pre.mk, to get rid of testing explicitly for clang (using ${CC:T:Mclang}) in individual Makefiles. Instead, use the following extra macros, for use with clang: - NO_WERROR.clang (disables -Werror) - NO_WCAST_ALIGN.clang (disables -Wcast-align) - NO_WFORMAT.clang (disables -Wformat and friends) - CLANG_NO_IAS (disables integrated assembler) - CLANG_OPT_SMALL (adds flags for extra small size optimizations) As a side effect, this enables setting CC/CXX/CPP in src.conf instead of make.conf! For clang, use the following: CC=clang CXX=clang++ CPP=clang-cpp MFC after: 2 weeks
2012-02-28 18:30:18 +00:00
# XXX: clang integrated-as doesn't grok .codeNN directives yet
CFLAGS.boot0.S= ${CLANG_NO_IAS}
CFLAGS.boot0ext.S= ${CLANG_NO_IAS}
CFLAGS+= ${CFLAGS.${.IMPSRC:T}}
Reference in New Issue Copy Permalink