freebsd-nq/sys/modules/ntb/ntb_hw_plx/Makefile

# $FreeBSD$

.PATH:  ${SRCTOP}/sys/dev/ntb/ntb_hw

KMOD    = ntb_hw_plx
SRCS    = ntb_hw_plx.c
SRCS += device_if.h bus_if.h pci_if.h ntb_if.h

.include <bsd.kmod.mk>
Add a new driver to support the Intel Non-Transparent Bridge(NTB). The NTB allows you to connect two systems with this device using a PCI-e link. The driver is made of two modules: - ntb_hw which is a basic hardware abstraction layer for the device. - if_ntb which implements the ntb network device and the communication protocol. The driver is limited at the moment to CPU memcpy instead of using DMA, and only Back-to-Back mode is supported. Also the network device isn't full featured yet. These changes will be coming soon. The DMA change will also bring in the ioat driver from the project branch it is on now. This is an initial port of the GPL/BSD Linux driver contributed by Jon Mason from Intel. Any bugs are my contributions. Sponsored by: Intel Reviewed by: jimharris, joel (man page only) Approved by: jimharris (mentor) 2013-04-29 22:48:53 +00:00			`# $FreeBSD$`

sys/modules: normalize .CURDIR-relative paths to SRCTOP This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 MFC after: 1 month Sponsored by: Dell EMC Isilon 2017-03-04 10:10:17 +00:00			`.PATH: ${SRCTOP}/sys/dev/ntb/ntb_hw`
Add a new driver to support the Intel Non-Transparent Bridge(NTB). The NTB allows you to connect two systems with this device using a PCI-e link. The driver is made of two modules: - ntb_hw which is a basic hardware abstraction layer for the device. - if_ntb which implements the ntb network device and the communication protocol. The driver is limited at the moment to CPU memcpy instead of using DMA, and only Back-to-Back mode is supported. Also the network device isn't full featured yet. These changes will be coming soon. The DMA change will also bring in the ioat driver from the project branch it is on now. This is an initial port of the GPL/BSD Linux driver contributed by Jon Mason from Intel. Any bugs are my contributions. Sponsored by: Intel Reviewed by: jimharris, joel (man page only) Approved by: jimharris (mentor) 2013-04-29 22:48:53 +00:00
Add NTB driver for PLX/Avago/Broadcom PCIe switches. This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though the second with predictable complications on hot-plug and reboot events). I tested it with PEX 8717 and PEX 8733 chips, but expect it should work with many other compatible ones too. It supports up to two NT bridges per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows, 6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines in those chips, but they are not yet supported. While there, rename Intel NTB driver from generic ntb_hw(4) to more specific ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and alike to Linux naming. MFC after: 2 weeks Sponsored by: iXsystems, Inc. 2017-08-30 21:16:32 +00:00			`KMOD = ntb_hw_plx`
			`SRCS = ntb_hw_plx.c`
NewBus'ify NTB subsystem. This follows NTB subsystem modularization in Linux, tuning it to FreeBSD native NewBus interfaces. This change allows to support different types of hardware with different drivers, support multiple NTB instances in a system, ntb_transport module use for needs other then if_ntb, etc. Sponsored by: iXsystems, Inc. 2016-07-09 11:20:42 +00:00			`SRCS += device_if.h bus_if.h pci_if.h ntb_if.h`
Add a new driver to support the Intel Non-Transparent Bridge(NTB). The NTB allows you to connect two systems with this device using a PCI-e link. The driver is made of two modules: - ntb_hw which is a basic hardware abstraction layer for the device. - if_ntb which implements the ntb network device and the communication protocol. The driver is limited at the moment to CPU memcpy instead of using DMA, and only Back-to-Back mode is supported. Also the network device isn't full featured yet. These changes will be coming soon. The DMA change will also bring in the ioat driver from the project branch it is on now. This is an initial port of the GPL/BSD Linux driver contributed by Jon Mason from Intel. Any bugs are my contributions. Sponsored by: Intel Reviewed by: jimharris, joel (man page only) Approved by: jimharris (mentor) 2013-04-29 22:48:53 +00:00
			`.include <bsd.kmod.mk>`