d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e035717e57
freebsd-nq/sys/dev/cxgbe/tom/t4_connect.c

491 lines
13 KiB
C
Raw Normal View History

- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
/*-
* Copyright (c) 2012 Chelsio Communications, Inc.
* All rights reserved.
* Written by: Navdeep Parhar <np@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
#include "opt_inet6.h"
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
#include <sys/param.h>
- Provide necessary includes. - Remove unnecessary includes. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-29 11:17:49 +00:00
#include <sys/systm.h>
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#include <sys/kernel.h>
#include <sys/ktr.h>
#include <sys/module.h>
#include <sys/protosw.h>
#include <sys/domain.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <netinet/ip.h>
#define TCPSTATES
#include <netinet/tcp_fsm.h>
More fixes to the build.
2016-01-27 05:15:53 +00:00
#include <netinet/tcp_var.h>
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#include <netinet/toecore.h>
#include "common/common.h"
#include "common/t4_msg.h"
#include "common/t4_regs.h"
- Read all TP parameters in one place. - Read the filter mode, calculate various shifts, and use them properly during active open (in select_ntuple). MFC after: 1 day
2013-07-04 17:55:52 +00:00
#include "common/t4_regs_values.h"
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#include "tom/t4_tom_l2t.h"
#include "tom/t4_tom.h"
/* atid services */
static int alloc_atid(struct adapter *, void *);
static void *lookup_atid(struct adapter *, int);
static void free_atid(struct adapter *, int);
static int
alloc_atid(struct adapter *sc, void *ctx)
{
struct tid_info *t = &sc->tids;
int atid = -1;
mtx_lock(&t->atid_lock);
if (t->afree) {
union aopen_entry *p = t->afree;
atid = p - t->atid_tab;
t->afree = p->next;
p->data = ctx;
t->atids_in_use++;
}
mtx_unlock(&t->atid_lock);
return (atid);
}
static void *
lookup_atid(struct adapter *sc, int atid)
{
struct tid_info *t = &sc->tids;
return (t->atid_tab[atid].data);
}
static void
free_atid(struct adapter *sc, int atid)
{
struct tid_info *t = &sc->tids;
union aopen_entry *p = &t->atid_tab[atid];
mtx_lock(&t->atid_lock);
p->next = t->afree;
t->afree = p;
t->atids_in_use--;
mtx_unlock(&t->atid_lock);
}
/*
Fix comment in t4_tom. No functional change. MFC after: 3 days
2017-01-07 00:08:55 +00:00
* Active open succeeded.
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
*/
static int
do_act_establish(struct sge_iq *iq, const struct rss_header *rss,
struct mbuf *m)
{
struct adapter *sc = iq->adapter;
const struct cpl_act_establish *cpl = (const void *)(rss + 1);
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
u_int tid = GET_TID(cpl);
u_int atid = G_TID_TID(ntohl(cpl->tos_atid));
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct toepcb *toep = lookup_atid(sc, atid);
struct inpcb *inp = toep->inp;
KASSERT(m == NULL, ("%s: wasn't expecting payload", __func__));
KASSERT(toep->tid == atid, ("%s: toep tid/atid mismatch", __func__));
CTR3(KTR_CXGBE, "%s: atid %u, tid %u", __func__, atid, tid);
free_atid(sc, atid);
cxgbe/tom: Add VIMAGE support to the TOE driver. Active Open: - Save the socket's vnet at the time of the active open (t4_connect) and switch to it when processing the reply (do_act_open_rpl or do_act_establish). Passive Open: - Save the listening socket's vnet in the driver's listen_ctx and switch to it when processing incoming SYNs for the socket. - Reject SYNs that arrive on an ifnet that's not in the same vnet as the listening socket. CLIP (Compressed Local IPv6) table: - Add only those IPv6 addresses to the CLIP that are in a vnet associated with one of the card's ifnets. Misc: - Set vnet from the toepcb when processing TCP state transitions. - The kernel sets the vnet when calling the driver's output routine so t4_push_frames runs in proper vnet context already. One exception is when incoming credits trigger tx within the driver's ithread. Set the vnet explicitly in do_fw4_ack for that case. MFC after: 3 days Sponsored by: Chelsio Communications
2017-01-11 23:48:17 +00:00
CURVNET_SET(toep->vnet);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
INP_WLOCK(inp);
toep->tid = tid;
cxgbe/t4_tom: Fix tid accounting. An offloaded IPv6 connection uses 2 tids, not 1, in the hardware. MFC after: 3 days Sponsored by: Chelsio Communications
2017-01-07 20:26:19 +00:00
insert_tid(sc, tid, toep, inp->inp_vflag & INP_IPV6 ? 2 : 1);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (inp->inp_flags & INP_DROPPED) {
/* socket closed by the kernel before hw told us it connected */
send_flowc_wr(toep, NULL);
send_reset(sc, toep, be32toh(cpl->snd_isn));
goto done;
}
make_established(toep, cpl->snd_isn, cpl->rcv_isn, cpl->tcp_opt);
done:
INP_WUNLOCK(inp);
cxgbe/tom: Add VIMAGE support to the TOE driver. Active Open: - Save the socket's vnet at the time of the active open (t4_connect) and switch to it when processing the reply (do_act_open_rpl or do_act_establish). Passive Open: - Save the listening socket's vnet in the driver's listen_ctx and switch to it when processing incoming SYNs for the socket. - Reject SYNs that arrive on an ifnet that's not in the same vnet as the listening socket. CLIP (Compressed Local IPv6) table: - Add only those IPv6 addresses to the CLIP that are in a vnet associated with one of the card's ifnets. Misc: - Set vnet from the toepcb when processing TCP state transitions. - The kernel sets the vnet when calling the driver's output routine so t4_push_frames runs in proper vnet context already. One exception is when incoming credits trigger tx within the driver's ithread. Set the vnet explicitly in do_fw4_ack for that case. MFC after: 3 days Sponsored by: Chelsio Communications
2017-01-11 23:48:17 +00:00
CURVNET_RESTORE();
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return (0);
}
/*
* Convert an ACT_OPEN_RPL status to an errno.
*/
static inline int
act_open_rpl_status_to_errno(int status)
{
switch (status) {
case CPL_ERR_CONN_RESET:
return (ECONNREFUSED);
case CPL_ERR_ARP_MISS:
return (EHOSTUNREACH);
case CPL_ERR_CONN_TIMEDOUT:
return (ETIMEDOUT);
case CPL_ERR_TCAM_FULL:
Correctly handle the case where an inp has already been dropped by the time the TOE driver reports that an active open failed. toe_connect_failed is supposed to handle this but it should be provided the inpcb instead of the tcpcb which may no longer be around.
2012-08-21 18:09:33 +00:00
return (EAGAIN);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
case CPL_ERR_CONN_EXIST:
log(LOG_ERR, "ACTIVE_OPEN_RPL: 4-tuple in use\n");
Correctly handle the case where an inp has already been dropped by the time the TOE driver reports that an active open failed. toe_connect_failed is supposed to handle this but it should be provided the inpcb instead of the tcpcb which may no longer be around.
2012-08-21 18:09:33 +00:00
return (EAGAIN);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
default:
return (EIO);
}
}
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
void
act_open_failure_cleanup(struct adapter *sc, u_int atid, u_int status)
{
struct toepcb *toep = lookup_atid(sc, atid);
struct inpcb *inp = toep->inp;
struct toedev *tod = &toep->td->tod;
free_atid(sc, atid);
toep->tid = -1;
cxgbe/tom: Add VIMAGE support to the TOE driver. Active Open: - Save the socket's vnet at the time of the active open (t4_connect) and switch to it when processing the reply (do_act_open_rpl or do_act_establish). Passive Open: - Save the listening socket's vnet in the driver's listen_ctx and switch to it when processing incoming SYNs for the socket. - Reject SYNs that arrive on an ifnet that's not in the same vnet as the listening socket. CLIP (Compressed Local IPv6) table: - Add only those IPv6 addresses to the CLIP that are in a vnet associated with one of the card's ifnets. Misc: - Set vnet from the toepcb when processing TCP state transitions. - The kernel sets the vnet when calling the driver's output routine so t4_push_frames runs in proper vnet context already. One exception is when incoming credits trigger tx within the driver's ithread. Set the vnet explicitly in do_fw4_ack for that case. MFC after: 3 days Sponsored by: Chelsio Communications
2017-01-11 23:48:17 +00:00
CURVNET_SET(toep->vnet);
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
if (status != EAGAIN)
Decompose TCP INP_INFO lock to increase short-lived TCP connections scalability: - The existing TCP INP_INFO lock continues to protect the global inpcb list stability during full list traversal (e.g. tcp_pcblist()). - A new INP_LIST lock protects inpcb list actual modifications (inp allocation and free) and inpcb global counters. It allows to use TCP INP_INFO_RLOCK lock in critical paths (e.g. tcp_input()) and INP_INFO_WLOCK only in occasional operations that walk all connections. PR: 183659 Differential Revision: https://reviews.freebsd.org/D2599 Reviewed by: jhb, adrian Tested by: adrian, nitroboost-gmail.com Sponsored by: Verisign, Inc.
2015-08-03 12:13:54 +00:00
INP_INFO_RLOCK(&V_tcbinfo);
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
INP_WLOCK(inp);
toe_connect_failed(tod, inp, status);
final_cpl_received(toep); /* unlocks inp */
if (status != EAGAIN)
Decompose TCP INP_INFO lock to increase short-lived TCP connections scalability: - The existing TCP INP_INFO lock continues to protect the global inpcb list stability during full list traversal (e.g. tcp_pcblist()). - A new INP_LIST lock protects inpcb list actual modifications (inp allocation and free) and inpcb global counters. It allows to use TCP INP_INFO_RLOCK lock in critical paths (e.g. tcp_input()) and INP_INFO_WLOCK only in occasional operations that walk all connections. PR: 183659 Differential Revision: https://reviews.freebsd.org/D2599 Reviewed by: jhb, adrian Tested by: adrian, nitroboost-gmail.com Sponsored by: Verisign, Inc.
2015-08-03 12:13:54 +00:00
INP_INFO_RUNLOCK(&V_tcbinfo);
cxgbe/tom: Add VIMAGE support to the TOE driver. Active Open: - Save the socket's vnet at the time of the active open (t4_connect) and switch to it when processing the reply (do_act_open_rpl or do_act_establish). Passive Open: - Save the listening socket's vnet in the driver's listen_ctx and switch to it when processing incoming SYNs for the socket. - Reject SYNs that arrive on an ifnet that's not in the same vnet as the listening socket. CLIP (Compressed Local IPv6) table: - Add only those IPv6 addresses to the CLIP that are in a vnet associated with one of the card's ifnets. Misc: - Set vnet from the toepcb when processing TCP state transitions. - The kernel sets the vnet when calling the driver's output routine so t4_push_frames runs in proper vnet context already. One exception is when incoming credits trigger tx within the driver's ithread. Set the vnet explicitly in do_fw4_ack for that case. MFC after: 3 days Sponsored by: Chelsio Communications
2017-01-11 23:48:17 +00:00
CURVNET_RESTORE();
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
}
Fix comment in t4_tom. No functional change. MFC after: 3 days
2017-01-07 00:08:55 +00:00
/*
* Active open failed.
*/
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
static int
do_act_open_rpl(struct sge_iq *iq, const struct rss_header *rss,
struct mbuf *m)
{
struct adapter *sc = iq->adapter;
const struct cpl_act_open_rpl *cpl = (const void *)(rss + 1);
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
u_int atid = G_TID_TID(G_AOPEN_ATID(be32toh(cpl->atid_status)));
u_int status = G_AOPEN_STATUS(be32toh(cpl->atid_status));
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct toepcb *toep = lookup_atid(sc, atid);
Correctly handle the case where an inp has already been dropped by the time the TOE driver reports that an active open failed. toe_connect_failed is supposed to handle this but it should be provided the inpcb instead of the tcpcb which may no longer be around.
2012-08-21 18:09:33 +00:00
int rc;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
KASSERT(m == NULL, ("%s: wasn't expecting payload", __func__));
KASSERT(toep->tid == atid, ("%s: toep tid/atid mismatch", __func__));
CTR3(KTR_CXGBE, "%s: atid %u, status %u ", __func__, atid, status);
/* Ignore negative advice */
Add a couple of missing error codes. Treat CPL_ERR_KEEPALV_NEG_ADVICE as negative advice and not a fatal error. MFC after: 3 days
2013-01-26 03:01:51 +00:00
if (negative_advice(status))
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return (0);
if (status && act_open_has_tid(status))
release_tid(sc, GET_TID(cpl), toep->ctrlq);
Correctly handle the case where an inp has already been dropped by the time the TOE driver reports that an active open failed. toe_connect_failed is supposed to handle this but it should be provided the inpcb instead of the tcpcb which may no longer be around.
2012-08-21 18:09:33 +00:00
rc = act_open_rpl_status_to_errno(status);
cxgbe/tom: don't leak resources tied to an active open request that cannot be sent to the chip because a prerequisite L2 resolution failed. Submitted by: Hariprasad at chelsio dot com (original version) MFC after: 2 weeks.
2014-10-07 21:26:22 +00:00
act_open_failure_cleanup(sc, atid, rc);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return (0);
}
/*
* Options2 for active open.
*/
static uint32_t
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
calc_opt2a(struct socket *so, struct toepcb *toep)
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
{
struct tcpcb *tp = so_sototcpcb(so);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct port_info *pi = toep->vi->pi;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct adapter *sc = pi->adapter;
cxgbe/tom: Slight simplification of code that calculates options2. MFC after: 3 days
2013-04-11 21:36:01 +00:00
uint32_t opt2;
opt2 = V_TX_QUEUE(sc->params.tp.tx_modq[pi->tx_chan]) |
F_RSS_QUEUE_VALID | V_RSS_QUEUE(toep->ofld_rxq->iq.abs_id);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (tp->t_flags & TF_SACK_PERMIT)
opt2 |= F_SACK_EN;
if (tp->t_flags & TF_REQ_TSTMP)
opt2 |= F_TSTAMPS_EN;
if (tp->t_flags & TF_REQ_SCALE)
opt2 |= F_WND_SCALE_EN;
if (V_tcp_do_ecn)
opt2 |= F_CCTRL_ECN;
cxgbe/tom: Slight simplification of code that calculates options2. MFC after: 3 days
2013-04-11 21:36:01 +00:00
/* RX_COALESCE is always a valid value (M_RX_COALESCE). */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (is_t4(sc))
cxgbe/tom: Slight simplification of code that calculates options2. MFC after: 3 days
2013-04-11 21:36:01 +00:00
opt2 |= F_RX_COALESCE_VALID;
The T5 allows the driver to specify the ISS. Do so; use the ISS picked by the kernel. MFC after: 1 day
2013-07-04 18:41:21 +00:00
else {
cxgbe/tom: Slight simplification of code that calculates options2. MFC after: 3 days
2013-04-11 21:36:01 +00:00
opt2 |= F_T5_OPT_2_VALID;
cxgbe: catch up with the latest hardware-related definitions. Obtained from: Chelsio Communications Sponsored by: Chelsio Communications
2016-02-19 00:29:16 +00:00
opt2 |= F_T5_ISS;
The T5 allows the driver to specify the ISS. Do so; use the ISS picked by the kernel. MFC after: 1 day
2013-07-04 18:41:21 +00:00
}
- Make note of interface MTU change if the rx queues exist, and not just when the interface is up. - Add a tunable to control the TOE's rx coalesce feature (enabled by default as it always has been). Consider the interface MTU or the coalesce size when deciding which cluster zone to use to fill the offload rx queue's free list. The tunable is: dev.{t4nex,t5nex}.<N>.toe.rx_coalesce MFC after: 1 day
2013-07-04 21:19:01 +00:00
if (sc->tt.rx_coalesce)
opt2 |= V_RX_COALESCE(M_RX_COALESCE);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Support for TCP DDP (Direct Data Placement) in the T4 TOE module. Basically, this is automatic rx zero copy when feasible. TCP payload is DMA'd directly into the userspace buffer described by the uio submitted in soreceive by an application. - Works with sockets that are being handled by the TCP offload engine of a T4 chip (you need t4_tom.ko module loaded after cxgbe, and an "ifconfig +toe" on the cxgbe interface). - Does not require any modification to the application. - Not enabled by default. Use hw.t4nex.<X>.toe.ddp="1" to enable it.
2012-08-17 00:49:29 +00:00
#ifdef USE_DDP_RX_FLOW_CONTROL
if (toep->ulp_mode == ULP_MODE_TCPDDP)
opt2 |= F_RX_FC_VALID | F_RX_FC_DDP;
#endif
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return (htobe32(opt2));
}
void
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
t4_init_connect_cpl_handlers(void)
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
{
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
t4_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish);
t4_register_cpl_handler(CPL_ACT_OPEN_RPL, do_act_open_rpl);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
}
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
#define DONT_OFFLOAD_ACTIVE_OPEN(x) do { \
reason = __LINE__; \
rc = (x); \
goto failed; \
} while (0)
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
static inline int
act_open_cpl_size(struct adapter *sc, int isipv6)
{
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
int idx;
static const int sz_table[3][2] = {
{
sizeof (struct cpl_act_open_req),
sizeof (struct cpl_act_open_req6)
},
{
sizeof (struct cpl_t5_act_open_req),
sizeof (struct cpl_t5_act_open_req6)
},
{
sizeof (struct cpl_t6_act_open_req),
sizeof (struct cpl_t6_act_open_req6)
},
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
};
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
MPASS(chip_id(sc) >= CHELSIO_T4);
idx = min(chip_id(sc) - CHELSIO_T4, 2);
return (sz_table[idx][!!isipv6]);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
/*
* active open (soconnect).
*
* State of affairs on entry:
* soisconnecting (so_state |= SS_ISCONNECTING)
* tcbinfo not locked (This has changed - used to be WLOCKed)
* inp WLOCKed
* tp->t_state = TCPS_SYN_SENT
* rtalloc1, RT_UNLOCK on rt.
*/
int
t4_connect(struct toedev *tod, struct socket *so, struct rtentry *rt,
struct sockaddr *nam)
{
struct adapter *sc = tod->tod_softc;
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
struct tom_data *td = tod_td(tod);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct toepcb *toep = NULL;
struct wrqe *wr = NULL;
struct ifnet *rt_ifp = rt->rt_ifp;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct vi_info *vi;
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
int mtu_idx, rscale, qid_atid, rc, isipv6;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct inpcb *inp = sotoinpcb(so);
struct tcpcb *tp = intotcpcb(inp);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
int reason;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
INP_WLOCK_ASSERT(inp);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
KASSERT(nam->sa_family == AF_INET || nam->sa_family == AF_INET6,
("%s: dest addr %p has family %u", __func__, nam, nam->sa_family));
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (rt_ifp->if_type == IFT_ETHER)
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
vi = rt_ifp->if_softc;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
else if (rt_ifp->if_type == IFT_L2VLAN) {
struct ifnet *ifp = VLAN_COOKIE(rt_ifp);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
vi = ifp->if_softc;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
} else if (rt_ifp->if_type == IFT_IEEE8023ADLAG)
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
DONT_OFFLOAD_ACTIVE_OPEN(ENOSYS); /* XXX: implement lagg+TOE */
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
else
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
DONT_OFFLOAD_ACTIVE_OPEN(ENOTSUP);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
cxgbe/t4_tom: toepcb should be all-zero on allocation because the code that cleans up on failure assumes that non-NULL values indicate initialized items. Sponsored by: Chelsio Communications
2016-09-05 19:37:47 +00:00
toep = alloc_toepcb(vi, -1, -1, M_NOWAIT | M_ZERO);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (toep == NULL)
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
DONT_OFFLOAD_ACTIVE_OPEN(ENOMEM);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
toep->tid = alloc_atid(sc, toep);
if (toep->tid < 0)
DONT_OFFLOAD_ACTIVE_OPEN(ENOMEM);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
toep->l2te = t4_l2t_get(vi->pi, rt_ifp,
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
rt->rt_flags & RTF_GATEWAY ? rt->rt_gateway : nam);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
if (toep->l2te == NULL)
DONT_OFFLOAD_ACTIVE_OPEN(ENOMEM);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
isipv6 = nam->sa_family == AF_INET6;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
wr = alloc_wrqe(act_open_cpl_size(sc, isipv6), toep->ctrlq);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (wr == NULL)
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
DONT_OFFLOAD_ACTIVE_OPEN(ENOMEM);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
cxgbe/tom: Add VIMAGE support to the TOE driver. Active Open: - Save the socket's vnet at the time of the active open (t4_connect) and switch to it when processing the reply (do_act_open_rpl or do_act_establish). Passive Open: - Save the listening socket's vnet in the driver's listen_ctx and switch to it when processing incoming SYNs for the socket. - Reject SYNs that arrive on an ifnet that's not in the same vnet as the listening socket. CLIP (Compressed Local IPv6) table: - Add only those IPv6 addresses to the CLIP that are in a vnet associated with one of the card's ifnets. Misc: - Set vnet from the toepcb when processing TCP state transitions. - The kernel sets the vnet when calling the driver's output routine so t4_push_frames runs in proper vnet context already. One exception is when incoming credits trigger tx within the driver's ithread. Set the vnet explicitly in do_fw4_ack for that case. MFC after: 3 days Sponsored by: Chelsio Communications
2017-01-11 23:48:17 +00:00
toep->vnet = so->so_vnet;
Support for TCP DDP (Direct Data Placement) in the T4 TOE module. Basically, this is automatic rx zero copy when feasible. TCP payload is DMA'd directly into the userspace buffer described by the uio submitted in soreceive by an application. - Works with sockets that are being handled by the TCP offload engine of a T4 chip (you need t4_tom.ko module loaded after cxgbe, and an "ifconfig +toe" on the cxgbe interface). - Does not require any modification to the application. - Not enabled by default. Use hw.t4nex.<X>.toe.ddp="1" to enable it.
2012-08-17 00:49:29 +00:00
if (sc->tt.ddp && (so->so_options & SO_NO_DDP) == 0)
set_tcpddp_ulp_mode(toep);
else
toep->ulp_mode = ULP_MODE_NONE;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
SOCKBUF_LOCK(&so->so_rcv);
/* opt0 rcv_bufsiz initially, assumes its normal meaning later */
toep->rx_credits = min(select_rcv_wnd(so) >> 10, M_RCV_BUFSIZ);
SOCKBUF_UNLOCK(&so->so_rcv);
/*
* The kernel sets request_r_scale based on sb_max whereas we need to
* take hardware's MAX_RCV_WND into account too. This is normally a
* no-op as MAX_RCV_WND is much larger than the default sb_max.
*/
if (tp->t_flags & TF_REQ_SCALE)
rscale = tp->request_r_scale = select_rcv_wscale();
else
rscale = 0;
mtu_idx = find_best_mtu_idx(sc, &inp->inp_inc, 0);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
qid_atid = (toep->ofld_rxq->iq.abs_id << 14) | toep->tid;
if (isipv6) {
struct cpl_act_open_req6 *cpl = wrtod(wr);
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
struct cpl_t5_act_open_req6 *cpl5 = (void *)cpl;
struct cpl_t6_act_open_req6 *cpl6 = (void *)cpl;
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
if ((inp->inp_vflag & INP_IPV6) == 0)
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
DONT_OFFLOAD_ACTIVE_OPEN(ENOTSUP);
toep->ce = hold_lip(td, &inp->in6p_laddr);
if (toep->ce == NULL)
DONT_OFFLOAD_ACTIVE_OPEN(ENOENT);
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
switch (chip_id(sc)) {
case CHELSIO_T4:
- Read all TP parameters in one place. - Read the filter mode, calculate various shifts, and use them properly during active open (in select_ntuple). MFC after: 1 day
2013-07-04 17:55:52 +00:00
INIT_TP_WR(cpl, 0);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
cpl->params = select_ntuple(vi, toep->l2te);
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
break;
case CHELSIO_T5:
INIT_TP_WR(cpl5, 0);
cpl5->iss = htobe32(tp->iss);
cpl5->params = select_ntuple(vi, toep->l2te);
break;
case CHELSIO_T6:
default:
INIT_TP_WR(cpl6, 0);
cpl6->iss = htobe32(tp->iss);
cpl6->params = select_ntuple(vi, toep->l2te);
break;
- Read all TP parameters in one place. - Read the filter mode, calculate various shifts, and use them properly during active open (in select_ntuple). MFC after: 1 day
2013-07-04 17:55:52 +00:00
}
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
OPCODE_TID(cpl) = htobe32(MK_OPCODE_TID(CPL_ACT_OPEN_REQ6,
qid_atid));
cpl->local_port = inp->inp_lport;
cpl->local_ip_hi = *(uint64_t *)&inp->in6p_laddr.s6_addr[0];
cpl->local_ip_lo = *(uint64_t *)&inp->in6p_laddr.s6_addr[8];
cpl->peer_port = inp->inp_fport;
cpl->peer_ip_hi = *(uint64_t *)&inp->in6p_faddr.s6_addr[0];
cpl->peer_ip_lo = *(uint64_t *)&inp->in6p_faddr.s6_addr[8];
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
cpl->opt0 = calc_opt0(so, vi, toep->l2te, mtu_idx, rscale,
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
toep->rx_credits, toep->ulp_mode);
cpl->opt2 = calc_opt2a(so, toep);
- Read all TP parameters in one place. - Read the filter mode, calculate various shifts, and use them properly during active open (in select_ntuple). MFC after: 1 day
2013-07-04 17:55:52 +00:00
} else {
struct cpl_act_open_req *cpl = wrtod(wr);
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
struct cpl_t5_act_open_req *cpl5 = (void *)cpl;
struct cpl_t6_act_open_req *cpl6 = (void *)cpl;
- Read all TP parameters in one place. - Read the filter mode, calculate various shifts, and use them properly during active open (in select_ntuple). MFC after: 1 day
2013-07-04 17:55:52 +00:00
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
switch (chip_id(sc)) {
case CHELSIO_T4:
- Read all TP parameters in one place. - Read the filter mode, calculate various shifts, and use them properly during active open (in select_ntuple). MFC after: 1 day
2013-07-04 17:55:52 +00:00
INIT_TP_WR(cpl, 0);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
cpl->params = select_ntuple(vi, toep->l2te);
cxgbe/t4_tom: Update the active/passive open code to support T6. Data path works as-is. Sponsored by: Chelsio Communications
2016-09-17 23:08:49 +00:00
break;
case CHELSIO_T5:
INIT_TP_WR(cpl5, 0);
cpl5->iss = htobe32(tp->iss);
cpl5->params = select_ntuple(vi, toep->l2te);
break;
case CHELSIO_T6:
default:
INIT_TP_WR(cpl6, 0);
cpl6->iss = htobe32(tp->iss);
cpl6->params = select_ntuple(vi, toep->l2te);
break;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
OPCODE_TID(cpl) = htobe32(MK_OPCODE_TID(CPL_ACT_OPEN_REQ,
qid_atid));
inp_4tuple_get(inp, &cpl->local_ip, &cpl->local_port,
&cpl->peer_ip, &cpl->peer_port);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
cpl->opt0 = calc_opt0(so, vi, toep->l2te, mtu_idx, rscale,
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
toep->rx_credits, toep->ulp_mode);
cpl->opt2 = calc_opt2a(so, toep);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
CTR5(KTR_CXGBE, "%s: atid %u (%s), toep %p, inp %p", __func__,
toep->tid, tcpstates[tp->t_state], toep, inp);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
offload_socket(so, toep);
rc = t4_l2t_send(sc, wr, toep->l2te);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (rc == 0) {
Minor cleanup: use bitwise ops instead of pointless wrappers around setbit/clrbit.
2012-08-21 18:30:16 +00:00
toep->flags |= TPF_CPL_PENDING;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return (0);
}
undo_offload_socket(so);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
reason = __LINE__;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
failed:
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
CTR3(KTR_CXGBE, "%s: not offloading (%d), rc %d", __func__, reason, rc);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (wr)
free_wrqe(wr);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
if (toep) {
if (toep->tid >= 0)
free_atid(sc, toep->tid);
if (toep->l2te)
t4_l2t_release(toep->l2te);
if (toep->ce)
release_lip(td, toep->ce);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
free_toepcb(toep);
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open). MFC after: 1 week
2013-01-15 18:38:51 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return (rc);
}
#endif
Reference in New Issue Copy Permalink