d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e04310d59b
freebsd-nq/share/mk/bsd.prog.mk

299 lines
6.8 KiB
Makefile
Raw Normal View History

Spplat our 1.1.5 `mk' ifiles over the top of the 4.4 ones. So far as I can tell, this is ts the right thing to do.
1994-08-04 21:09:27 +00:00
# from: @(#)bsd.prog.mk 5.26 (Berkeley) 6/25/91
$Id$ -> $FreeBSD$
1999-08-28 00:22:10 +00:00
# $FreeBSD$
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Don't include bsd.own.mk from sys.mk, this makes it impossible to use ``.if defined()'' inside bsd.own.mk to test for defines in individual makefiles. For example, setting DEBUG_FLAGS in Makefile didn't take the desired effect on the STRIP assignment. Added bsd.init.mk (like in NetBSD) that handles the inclusion of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that "build something". Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back to sys.mk (several source tree makefiles want to check it early) and removed MACHINE_ARCH initialization (it's hard to see from looking at the commitlogs what the problem was at the time, but now it serves no purpose). Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk. Protect bsd.obj.mk from repetitive inclusion. Prohibiting the direct inclusion of bsd.obj.mk might be a good idea too.
2002-04-17 13:49:29 +00:00
.include <bsd.init.mk>
bsd.compiler.mk was implicitly included by bsd.own.mk in historical versions. With its movement to src.opts.mk, bsd.prog.mk was testing COMPILER_TYPE without including the bsd.compiler.mk anymore. In the source tree, this caused no problems, for reasons that aren't clear, but does cause problems outside of the source tree. Allow bsd.compiler.mk to be included multiple times safely, and always include bsd.compiler.mk at the top of bsd.prog.mk. Resist the urge to put it in bsd.init.mk, since that would reintroduce the implicit include.
2014-05-07 18:15:02 +00:00
.include <bsd.compiler.mk>
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Extend the lint handling a bit. o Make it possible to prevent parts of the tree from being linted (say) during a 'make world' by setting NOLINT in a leaf Makefile. o Make "make lint" work (better) for executable programs. o Clean up (nuke!) a syntax damaged pipeline.
2002-09-20 19:32:51 +00:00
.SUFFIXES: .out .o .c .cc .cpp .cxx .C .m .y .l .ln .s .S .asm
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Removed COPTS support from kmod.mk and kern.pre.mk. COPTS support in bsd.prog.mk is preserved but discouraged.
2004-08-13 14:30:26 +00:00
# XXX The use of COPTS in modern makefiles is discouraged.
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.if defined(COPTS)
Follow-up r297282: Make the COPTS warning more useful. Sponsored by: EMC / Isilon Storage Division
2016-04-01 23:31:57 +00:00
.warning ${.CURDIR}: COPTS should be CFLAGS.
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
CFLAGS+=${COPTS}
.endif
Add a knob for compiling the tree -DNDEBUG. This turns off all the asserts and makes binaries smaller. The binaries also become repeatable again. As it was, without this md5's of binaries built with different paths differed. # Where do I document this?
2006-09-11 05:35:57 +00:00
.if ${MK_ASSERT_DEBUG} == "no"
CFLAGS+= -DNDEBUG
When building WITHOUT_ASSERT_DEBUG, we need to disable -Werror as its easy to see "warning: unused variable `foo'".
2006-09-13 23:27:21 +00:00
NO_WERROR=
Add a knob for compiling the tree -DNDEBUG. This turns off all the asserts and makes binaries smaller. The binaries also become repeatable again. As it was, without this md5's of binaries built with different paths differed. # Where do I document this?
2006-09-11 05:35:57 +00:00
.endif
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.if defined(DEBUG_FLAGS)
CFLAGS+=${DEBUG_FLAGS}
Also add DEBUG_FLAGS to CXXFLAGS if defined.
2010-02-18 03:32:51 +00:00
CXXFLAGS+=${DEBUG_FLAGS}
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
- CTF knob is now implemented using common scheme: MK_CTF=yes/no is defined based on WITH/WITHOUT_CTF settings, default is WITHOUT_CTF, NO_CTF overrides WITH_CTF (used by Makefile.inc1) - CTFCONVERT_CMD/NORMAL_CTFCONVERT are now defined to empty string if make(1) can handle empty commands
2011-11-30 18:11:49 +00:00
.if ${MK_CTF} != "no" && ${DEBUG_FLAGS:M-g} != ""
Add support for the Compact C Type (CTF) conversions throughout FreeBSD's system makefiles. Note that the CTF conversion defaults to off. We may choose to change this default later if DTrace proves popular and people are prepared to wear the compilation performance impact of compiling with debug symbols all the time. Setting NO_CTF in the make args or user environment turns off CTF conversion. Even if we choose to default CTF generation to on later, we still need NO_CTF so that the buildworld process can bootstrap the tools without needlessly generating CTF data for temporary tools. Setting WITH_CTF in the make args or user environment (and _NOT_ in /etc/make.conf) is the only way to enable CTF data conversion. Nore that this can't be implemented the same way that the WITH_ and WITHOUT_ stuff is implemented throughout the buildworld because the CTF conversion needs to work when building a simple object without a Makefile, using the default rules in sys.mk. Typing 'make test.o' with no makefile and just a source file test.c should work. Also, typing 'make WITH_CTF=1 test.o without a makefile and just a source file test.c should work and produce an object with a CTF elf section. Typing 'make WITH_CTF=1 CFLAGS=-g test.o' without a makefile and just a source file test.c should produce an object with both a CTF elf section and the debug elf sections. In the FreeBSD build where more .mk files are used than just sys.mk which is included my make by default, the use of DEBUG_FLAGS is the correct way to enable a debug build. The important thing to note here is that it is the DEBUG_FLAGS setting that prevents libraries and programs from being stripped on installation. So, for the addition of CTF data conversion, setting DEBUG_FLAGS to contain -g, without NO_CTF, will cause the ctfconvert and ctfmerge build programs to be executed also with the -g arg so that debug symbols are retained rather than being removed after the CTF data elf section has been added. Add DTrace libraries to the list of libnames.
2008-05-22 01:14:43 +00:00
CTFFLAGS+= -g
.endif
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.endif
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.if defined(PROG_CXX)
PROG= ${PROG_CXX}
.endif
Allow standalone debug for non-default ${PROG} targets This allows WITH_DEBUG_FILES to produce standalone debug for the ELF runtime linker. We previously disabled standalone debug files for bsd.prog.mk consumers that included a non-default ${PROG} target, but this is not required. Consumers that do not support standalone debug are still handled by disabling it for statically linked binaries, and for those that specify a non-default binary format. Sponsored by: DARPA, AFRL
2014-09-02 19:05:34 +00:00
.if !empty(LDFLAGS:M-Wl,*--oformat,*) || !empty(LDFLAGS:M-static)
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
MK_DEBUG_FILES= no
.endif
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.if defined(CRUNCH_CFLAGS)
Add ${CRUNCH_CFLAGS} support for adding compile options to crunch components. This is generally considered a non-optimal solution but it gets the job done for the /rescue case. Submitted by: Tim Kientzle <kientzle@acm.org>
2003-06-29 18:16:26 +00:00
CFLAGS+=${CRUNCH_CFLAGS}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.else
.if ${MK_DEBUG_FILES} != "no" && empty(DEBUG_FLAGS:M-g) && \
empty(DEBUG_FLAGS:M-gdwarf-*)
CFLAGS+= -g
CTFFLAGS+= -g
.endif
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Add support for DEBUG_FLAGS. If you say something like: make DEBUG_FLAGS=-g2 You can compile something for debugging at debugging level 2. It will also take care not to strip the resulting executable(s).
1994-09-16 14:30:25 +00:00
.if !defined(DEBUG_FLAGS)
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
STRIP?= -s
Add support for DEBUG_FLAGS. If you say something like: make DEBUG_FLAGS=-g2 You can compile something for debugging at debugging level 2. It will also take care not to strip the resulting executable(s).
1994-09-16 14:30:25 +00:00
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Makes it more flexible to tag and define a target package
2015-02-13 00:16:05 +00:00
.if defined(NO_ROOT)
.if !defined(TAGS) || ! ${TAGS:Mpackage=*}
TAGS+= package=${PACKAGE:Uruntime}
.endif
TAG_ARGS= -T ${TAGS:[*]:S/ /,/g}
.endif
NOSHARED -> NO_SHARED
2004-12-21 09:59:45 +00:00
.if defined(NO_SHARED) && (${NO_SHARED} != "no" && ${NO_SHARED} != "NO")
Spplat our 1.1.5 `mk' ifiles over the top of the 4.4 ones. So far as I can tell, this is ts the right thing to do.
1994-08-04 21:09:27 +00:00
LDFLAGS+= -static
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.if ${MK_DEBUG_FILES} != "no"
PROG_FULL=${PROG}.full
# Use ${DEBUGDIR} for base system debug files, else .debug subdirectory
.if defined(BINDIR) && (\
${BINDIR} == "/bin" ||\
/libexec subdirs are part of the base system (for *.debug files) Sponsored by: The FreeBSD Foundation
2015-10-14 19:19:44 +00:00
${BINDIR:C%/libexec(/.*)?%/libexec%} == "/libexec" ||\
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
${BINDIR} == "/sbin" ||\
bsd.prog.mk: add "/usr/lib" to list of base system directories kgzldr.o is installed into /usr/lib but using bsd.prog.mk. Add /usr/lib to the base system directory list so that debug files are installed into /usr/lib/debug/usr/lib, not /usr/lib/.debug . Approved by: re (gjb) MFC after: 1 week Sponsored by: The FreeBSD Foundation
2016-06-24 18:45:16 +00:00
${BINDIR:C%/usr/(bin|bsdinstall|libexec|lpr|sendmail|sm.bin|sbin|tests)(/.*)?%/usr/bin%} == "/usr/bin" ||\
${BINDIR} == "/usr/lib" \
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
)
DEBUGFILEDIR= ${DEBUGDIR}${BINDIR}
.else
DEBUGFILEDIR?= ${BINDIR}/.debug
DEBUG_FILES: Create the DEBUGFILEDIR if it doesn't exist on install. Currently the base.txz distribution does not get the BSD.debug.dist mtree extracted into it. So if you start from that and then try to build a 3rd-party application outside of buildworld it will by-default try installing the debug files into a missing directory if they are being installed into /usr/lib. Check for the existence before forcing the directory to be created rather than the older way of running a shell command with test -d || mkdir -p always. Reported by: HardenedBSD (https://github.com/HardenedBSD/secadm/issues/23) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D5411
2016-03-03 18:08:58 +00:00
.endif
.if !exists(${DESTDIR}${DEBUGFILEDIR})
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
DEBUGMKDIR=
.endif
.else
PROG_FULL= ${PROG}
Implement PROG_CXX for <bsd.prog.mk>. Obtained from: NetBSD (with some mods) Reviewed by: peter
2002-04-11 10:44:30 +00:00
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.if defined(PROG)
Always define and use PROGNAME This avoids having separate cases in the install rule for PROGNAME set and not set. This is a minor cleanup in advance of further support for standalone debug files.
2013-03-26 20:32:46 +00:00
PROGNAME?= ${PROG}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.if defined(SRCS)
Spplat our 1.1.5 `mk' ifiles over the top of the 4.4 ones. So far as I can tell, this is ts the right thing to do.
1994-08-04 21:09:27 +00:00
OBJS+= ${SRCS:N*.h:R:S/$/.o/g}
Check the existence of a 'beforelinking' target and make the resulting program or library depend on that before doing the final linking. This will be needed by DTrace. Sponsored by: The FreeBSD Foundation
2010-09-10 16:21:09 +00:00
.if target(beforelinking)
Explicitly specify that the beforelinking target depends on the generated object files, ensuring that the beforelinking recipe won't be executed until compilation has finished. Also define SHLIB_NAME_FULL to denote ${SHLIB_NAME}.debug if DEBUG_FILES is set and ${SHLIB_NAME} otherwise, which helps avoid obfuscating the compilation and linking rules. Reviewed by: emaste Approved by: emaste (co-mentor)
2012-12-31 21:54:43 +00:00
beforelinking: ${OBJS}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
${PROG_FULL}: beforelinking
Check the existence of a 'beforelinking' target and make the resulting program or library depend on that before doing the final linking. This will be needed by DTrace. Sponsored by: The FreeBSD Foundation
2010-09-10 16:21:09 +00:00
.endif
Revert r301079. This breaks cross-building with WITH_META_MODE since it will rebuild 'build-tools' during the 'everything' phase. A more proper fix is coming to bmake to implicitly require .META unless .NOMETA (and other restrictions) are in place.
2016-06-03 19:25:36 +00:00
${PROG_FULL}: ${OBJS}
Back out second part of the previous change. While this was indeed a good change, I shouldn't have made it after testing with the -DNOCLEAN buildworld. There are far too many users of this misfeature under sys/boot/. I will reapply the change after I fix these. This change has been tested with the clean buildworld.
2002-04-12 16:25:13 +00:00
.if defined(PROG_CXX)
Add built-in ccache build support via WITH_CCACHE_BUILD option. ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not used to achieve a safe pseudo-incremental build. This is explained in more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the cache, but with a full cache saves 30-50% in build times. When combined with the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the resulting dependency file, which it does not do when using mkdep(1)/'CC -E'. Stats are provided at the end of this message. This removes the need to modify /etc/make.conf with the CC:= and CXX:= lines which conflicted with external compiler support [3] (causing the bootstrap compiler to not be built which lead to obscure failures [4]), incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid Clang errors with parenthesis, and did not work with META_MODE. The option name was picked to match the existing option in ports. This feature is available for both in-src and out-of-src builds that use /usr/share/mk. Linking, assembly compiles, and pre-processing avoid using ccache since it is only overhead. ccache does nothing special in these modes, although there is no harm in calling it for them. CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap compiler to hash the content of the compiler binary to determine if it should be a cache miss. For external compilers the 'mtime' option is used as it is more efficient and likely to be correct. Future work may optimize the 'content' check using the same checks as whether a bootstrap compiler is needed to be built. The CCACHE_CPP2 pessimization is currently default in our devel/ccache port due to Clang requiring it. Clang's -Wparentheses-equality, -Wtautological-compare, and -Wself-assign warnings do not mix well with compiling already-pre-processed code that may have expanded macros that trigger the warnings. GCC has so far not had this issue so it is allowed to disable the CCACHE_CPP2 default in our port. Sharing a cache between multiple checkouts, or systems, is explained in the ccache manual. Sharing a cache over NFS would likely not be worth it, but syncing cache directories between systems may be useful for an organization. There is also a memcached backend available [5]. Due to using an object directory outside of the source directory though you will need to ensure that both are in the same prefix and all users use the same layout. A possible working layout is as follows: Source: /some/prefix/src1 Source: /some/prefix/src2 Source: /some/prefix/src3 Objdir: /some/prefix/obj Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj' This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace all absolute paths to be relative. Using something like this is required due to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache adds into its hash for the object without CCACHE_BASEDIR. distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc. I have not personally tested this and assume it will not mix well with using the bootstrap compiler. The cache from buildworld can be reused in a subdir by first running 'make buildenv' (from r290424). Note that the cache is currently different depending on whether -j is used or not due to ccache enabling -fdiagnostics-color automatically if stderr is a TTY, which bmake only does if not using -j. The system I used for testing was: WITNESS Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log. The arc was fully populated with src tree files and ccache objects. RAM: 76GiB CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz 2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16 The WITH_FAST_DEPEND feature was used for comparison here as well to show the dramatic time savings with a full cache. buildworld: x buildworld-before + buildworld-ccache-empty * buildworld-ccache-full % buildworld-ccache-full-fastdep # buildworld-fastdep +-------------------------------------------------------------------------------+ |% * # +| |% * # +| |% * # xxx +| | |A | | A| | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 3744.13 3794.31 3752.25 3763.5633 26.935139 + 3 4519 4525.04 4520.73 4521.59 3.1104823 Difference at 95.0% confidence 758.027 +/- 43.4565 20.1412% +/- 1.15466% (Student's t, pooled s = 19.1726) * 3 1823.08 1827.2 1825.62 1825.3 2.0785572 Difference at 95.0% confidence -1938.26 +/- 43.298 -51.5007% +/- 1.15045% (Student's t, pooled s = 19.1026) % 3 1266.96 1279.37 1270.47 1272.2667 6.3971113 Difference at 95.0% confidence -2491.3 +/- 44.3704 -66.1952% +/- 1.17895% (Student's t, pooled s = 19.5758) # 3 3153.34 3155.16 3154.2 3154.2333 0.91045776 Difference at 95.0% confidence -609.33 +/- 43.1943 -16.1902% +/- 1.1477% (Student's t, pooled s = 19.0569) buildkernel: x buildkernel-before + buildkernel-ccache-empty * buildkernel-ccache-empty-fastdep % buildkernel-ccache-full # buildkernel-ccache-full-fastdep @ buildkernel-fastdep +-------------------------------------------------------------------------------+ |# @ % * | |# @ % * x + | |# @ % * xx ++| | MA | | MA| | A | | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 571.57 573.94 571.79 572.43333 1.3094401 + 3 727.97 731.91 728.06 729.31333 2.2492295 Difference at 95.0% confidence 156.88 +/- 4.17129 27.4058% +/- 0.728695% (Student's t, pooled s = 1.84034) * 3 527.1 528.29 528.08 527.82333 0.63516402 Difference at 95.0% confidence -44.61 +/- 2.33254 -7.79305% +/- 0.407478% (Student's t, pooled s = 1.02909) % 3 400.4 401.05 400.62 400.69 0.3306055 Difference at 95.0% confidence -171.743 +/- 2.16453 -30.0023% +/- 0.378128% (Student's t, pooled s = 0.954969) # 3 201.94 203.34 202.28 202.52 0.73020545 Difference at 95.0% confidence -369.913 +/- 2.40293 -64.6212% +/- 0.419774% (Student's t, pooled s = 1.06015) @ 3 369.12 370.57 369.3 369.66333 0.79033748 Difference at 95.0% confidence -202.77 +/- 2.45131 -35.4225% +/- 0.428227% (Student's t, pooled s = 1.0815) [1] https://ccache.samba.org/performance.html [2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html [3] https://reviews.freebsd.org/D3484 [5] https://github.com/jrosdahl/ccache/pull/30 PR: 182944 [4] MFC after: 3 weeks Sponsored by: EMC / Isilon Storage Division Relnotes: yes
2015-11-08 00:50:18 +00:00
${CXX:N${CCACHE_BIN}} ${CXXFLAGS:N-M*} ${LDFLAGS} -o ${.TARGET} \
${OBJS} ${LDADD}
Back out second part of the previous change. While this was indeed a good change, I shouldn't have made it after testing with the -DNOCLEAN buildworld. There are far too many users of this misfeature under sys/boot/. I will reapply the change after I fix these. This change has been tested with the clean buildworld.
2002-04-12 16:25:13 +00:00
.else
Add built-in ccache build support via WITH_CCACHE_BUILD option. ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not used to achieve a safe pseudo-incremental build. This is explained in more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the cache, but with a full cache saves 30-50% in build times. When combined with the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the resulting dependency file, which it does not do when using mkdep(1)/'CC -E'. Stats are provided at the end of this message. This removes the need to modify /etc/make.conf with the CC:= and CXX:= lines which conflicted with external compiler support [3] (causing the bootstrap compiler to not be built which lead to obscure failures [4]), incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid Clang errors with parenthesis, and did not work with META_MODE. The option name was picked to match the existing option in ports. This feature is available for both in-src and out-of-src builds that use /usr/share/mk. Linking, assembly compiles, and pre-processing avoid using ccache since it is only overhead. ccache does nothing special in these modes, although there is no harm in calling it for them. CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap compiler to hash the content of the compiler binary to determine if it should be a cache miss. For external compilers the 'mtime' option is used as it is more efficient and likely to be correct. Future work may optimize the 'content' check using the same checks as whether a bootstrap compiler is needed to be built. The CCACHE_CPP2 pessimization is currently default in our devel/ccache port due to Clang requiring it. Clang's -Wparentheses-equality, -Wtautological-compare, and -Wself-assign warnings do not mix well with compiling already-pre-processed code that may have expanded macros that trigger the warnings. GCC has so far not had this issue so it is allowed to disable the CCACHE_CPP2 default in our port. Sharing a cache between multiple checkouts, or systems, is explained in the ccache manual. Sharing a cache over NFS would likely not be worth it, but syncing cache directories between systems may be useful for an organization. There is also a memcached backend available [5]. Due to using an object directory outside of the source directory though you will need to ensure that both are in the same prefix and all users use the same layout. A possible working layout is as follows: Source: /some/prefix/src1 Source: /some/prefix/src2 Source: /some/prefix/src3 Objdir: /some/prefix/obj Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj' This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace all absolute paths to be relative. Using something like this is required due to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache adds into its hash for the object without CCACHE_BASEDIR. distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc. I have not personally tested this and assume it will not mix well with using the bootstrap compiler. The cache from buildworld can be reused in a subdir by first running 'make buildenv' (from r290424). Note that the cache is currently different depending on whether -j is used or not due to ccache enabling -fdiagnostics-color automatically if stderr is a TTY, which bmake only does if not using -j. The system I used for testing was: WITNESS Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log. The arc was fully populated with src tree files and ccache objects. RAM: 76GiB CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz 2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16 The WITH_FAST_DEPEND feature was used for comparison here as well to show the dramatic time savings with a full cache. buildworld: x buildworld-before + buildworld-ccache-empty * buildworld-ccache-full % buildworld-ccache-full-fastdep # buildworld-fastdep +-------------------------------------------------------------------------------+ |% * # +| |% * # +| |% * # xxx +| | |A | | A| | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 3744.13 3794.31 3752.25 3763.5633 26.935139 + 3 4519 4525.04 4520.73 4521.59 3.1104823 Difference at 95.0% confidence 758.027 +/- 43.4565 20.1412% +/- 1.15466% (Student's t, pooled s = 19.1726) * 3 1823.08 1827.2 1825.62 1825.3 2.0785572 Difference at 95.0% confidence -1938.26 +/- 43.298 -51.5007% +/- 1.15045% (Student's t, pooled s = 19.1026) % 3 1266.96 1279.37 1270.47 1272.2667 6.3971113 Difference at 95.0% confidence -2491.3 +/- 44.3704 -66.1952% +/- 1.17895% (Student's t, pooled s = 19.5758) # 3 3153.34 3155.16 3154.2 3154.2333 0.91045776 Difference at 95.0% confidence -609.33 +/- 43.1943 -16.1902% +/- 1.1477% (Student's t, pooled s = 19.0569) buildkernel: x buildkernel-before + buildkernel-ccache-empty * buildkernel-ccache-empty-fastdep % buildkernel-ccache-full # buildkernel-ccache-full-fastdep @ buildkernel-fastdep +-------------------------------------------------------------------------------+ |# @ % * | |# @ % * x + | |# @ % * xx ++| | MA | | MA| | A | | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 571.57 573.94 571.79 572.43333 1.3094401 + 3 727.97 731.91 728.06 729.31333 2.2492295 Difference at 95.0% confidence 156.88 +/- 4.17129 27.4058% +/- 0.728695% (Student's t, pooled s = 1.84034) * 3 527.1 528.29 528.08 527.82333 0.63516402 Difference at 95.0% confidence -44.61 +/- 2.33254 -7.79305% +/- 0.407478% (Student's t, pooled s = 1.02909) % 3 400.4 401.05 400.62 400.69 0.3306055 Difference at 95.0% confidence -171.743 +/- 2.16453 -30.0023% +/- 0.378128% (Student's t, pooled s = 0.954969) # 3 201.94 203.34 202.28 202.52 0.73020545 Difference at 95.0% confidence -369.913 +/- 2.40293 -64.6212% +/- 0.419774% (Student's t, pooled s = 1.06015) @ 3 369.12 370.57 369.3 369.66333 0.79033748 Difference at 95.0% confidence -202.77 +/- 2.45131 -35.4225% +/- 0.428227% (Student's t, pooled s = 1.0815) [1] https://ccache.samba.org/performance.html [2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html [3] https://reviews.freebsd.org/D3484 [5] https://github.com/jrosdahl/ccache/pull/30 PR: 182944 [4] MFC after: 3 weeks Sponsored by: EMC / Isilon Storage Division Relnotes: yes
2015-11-08 00:50:18 +00:00
${CC:N${CCACHE_BIN}} ${CFLAGS:N-M*} ${LDFLAGS} -o ${.TARGET} ${OBJS} \
${LDADD}
Back out second part of the previous change. While this was indeed a good change, I shouldn't have made it after testing with the -DNOCLEAN buildworld. There are far too many users of this misfeature under sys/boot/. I will reapply the change after I fix these. This change has been tested with the clean buildworld.
2002-04-12 16:25:13 +00:00
.endif
- CTF knob is now implemented using common scheme: MK_CTF=yes/no is defined based on WITH/WITHOUT_CTF settings, default is WITHOUT_CTF, NO_CTF overrides WITH_CTF (used by Makefile.inc1) - CTFCONVERT_CMD/NORMAL_CTFCONVERT are now defined to empty string if make(1) can handle empty commands
2011-11-30 18:11:49 +00:00
.if ${MK_CTF} != "no"
Conditionalize ctfconvert/ctfmerge runs on make level (.if/.endif) instead of executing a shell on every object or executable/library file. This shaves off more than 30,000 shell invocations during buildworld.
2011-11-29 08:38:47 +00:00
${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${OBJS}
.endif
Back out second part of the previous change. While this was indeed a good change, I shouldn't have made it after testing with the -DNOCLEAN buildworld. There are far too many users of this misfeature under sys/boot/. I will reapply the change after I fix these. This change has been tested with the clean buildworld.
2002-04-12 16:25:13 +00:00
Make sure the only thing that follows .endif or .else is a comment.
2005-04-11 07:13:29 +00:00
.else # !defined(SRCS)
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Back out second part of the previous change. While this was indeed a good change, I shouldn't have made it after testing with the -DNOCLEAN buildworld. There are far too many users of this misfeature under sys/boot/. I will reapply the change after I fix these. This change has been tested with the clean buildworld.
2002-04-12 16:25:13 +00:00
.if !target(${PROG})
Implement PROG_CXX for <bsd.prog.mk>. Obtained from: NetBSD (with some mods) Reviewed by: peter
2002-04-11 10:44:30 +00:00
.if defined(PROG_CXX)
SRCS= ${PROG}.cc
.else
Fix spelling error in little-used target. Build an intermediate object file even when there is only one source file. This costs a little space but saves time if the target is rebuilt a lot, and it stops the target varying with the name of temporary intermediates. Use ${ECHO} instead of `echo' so that `make -s' is fairly quiet. Use ${ECHODIR} instead of echo for printing directory names so that `make -ss' is very quiet.
1994-08-28 15:32:10 +00:00
SRCS= ${PROG}.c
Implement PROG_CXX for <bsd.prog.mk>. Obtained from: NetBSD (with some mods) Reviewed by: peter
2002-04-11 10:44:30 +00:00
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Fix spelling error in little-used target. Build an intermediate object file even when there is only one source file. This costs a little space but saves time if the target is rebuilt a lot, and it stops the target varying with the name of temporary intermediates. Use ${ECHO} instead of `echo' so that `make -s' is fairly quiet. Use ${ECHODIR} instead of echo for printing directory names so that `make -ss' is very quiet.
1994-08-28 15:32:10 +00:00
# Always make an intermediate object file because:
# - it saves time rebuilding when only the library has changed
# - the name of the object gets put into the executable symbol table instead of
# the name of a variable temporary object.
# - it's useful to keep objects around for crunching.
Make sure to set OBJS consistently in the cases where SRCS is and isn't already defined. Setting it with "+=" makes it possible for other make scripts (e.g. bsd.dtrace.mk) to include additional object files in the linker arguments. Approved by: emaste (co-mentor)
2013-03-26 18:46:40 +00:00
OBJS+= ${PROG}.o
Limit check for target to smaller section of makefile.
1998-02-19 14:53:29 +00:00
Check the existence of a 'beforelinking' target and make the resulting program or library depend on that before doing the final linking. This will be needed by DTrace. Sponsored by: The FreeBSD Foundation
2010-09-10 16:21:09 +00:00
.if target(beforelinking)
Explicitly specify that the beforelinking target depends on the generated object files, ensuring that the beforelinking recipe won't be executed until compilation has finished. Also define SHLIB_NAME_FULL to denote ${SHLIB_NAME}.debug if DEBUG_FILES is set and ${SHLIB_NAME} otherwise, which helps avoid obfuscating the compilation and linking rules. Reviewed by: emaste Approved by: emaste (co-mentor)
2012-12-31 21:54:43 +00:00
beforelinking: ${OBJS}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
${PROG_FULL}: beforelinking
Check the existence of a 'beforelinking' target and make the resulting program or library depend on that before doing the final linking. This will be needed by DTrace. Sponsored by: The FreeBSD Foundation
2010-09-10 16:21:09 +00:00
.endif
Revert r301079. This breaks cross-building with WITH_META_MODE since it will rebuild 'build-tools' during the 'everything' phase. A more proper fix is coming to bmake to implicitly require .META unless .NOMETA (and other restrictions) are in place.
2016-06-03 19:25:36 +00:00
${PROG_FULL}: ${OBJS}
Don't add -lstdc++ to LDADD, just let c++(1) link C++ programs. Record the dependency on ${LIBSTDCPLUSPLUS} similar to ${LIBC}. Suggested by: imp, obrien, peter
2002-04-12 08:17:24 +00:00
.if defined(PROG_CXX)
Add built-in ccache build support via WITH_CCACHE_BUILD option. ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not used to achieve a safe pseudo-incremental build. This is explained in more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the cache, but with a full cache saves 30-50% in build times. When combined with the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the resulting dependency file, which it does not do when using mkdep(1)/'CC -E'. Stats are provided at the end of this message. This removes the need to modify /etc/make.conf with the CC:= and CXX:= lines which conflicted with external compiler support [3] (causing the bootstrap compiler to not be built which lead to obscure failures [4]), incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid Clang errors with parenthesis, and did not work with META_MODE. The option name was picked to match the existing option in ports. This feature is available for both in-src and out-of-src builds that use /usr/share/mk. Linking, assembly compiles, and pre-processing avoid using ccache since it is only overhead. ccache does nothing special in these modes, although there is no harm in calling it for them. CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap compiler to hash the content of the compiler binary to determine if it should be a cache miss. For external compilers the 'mtime' option is used as it is more efficient and likely to be correct. Future work may optimize the 'content' check using the same checks as whether a bootstrap compiler is needed to be built. The CCACHE_CPP2 pessimization is currently default in our devel/ccache port due to Clang requiring it. Clang's -Wparentheses-equality, -Wtautological-compare, and -Wself-assign warnings do not mix well with compiling already-pre-processed code that may have expanded macros that trigger the warnings. GCC has so far not had this issue so it is allowed to disable the CCACHE_CPP2 default in our port. Sharing a cache between multiple checkouts, or systems, is explained in the ccache manual. Sharing a cache over NFS would likely not be worth it, but syncing cache directories between systems may be useful for an organization. There is also a memcached backend available [5]. Due to using an object directory outside of the source directory though you will need to ensure that both are in the same prefix and all users use the same layout. A possible working layout is as follows: Source: /some/prefix/src1 Source: /some/prefix/src2 Source: /some/prefix/src3 Objdir: /some/prefix/obj Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj' This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace all absolute paths to be relative. Using something like this is required due to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache adds into its hash for the object without CCACHE_BASEDIR. distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc. I have not personally tested this and assume it will not mix well with using the bootstrap compiler. The cache from buildworld can be reused in a subdir by first running 'make buildenv' (from r290424). Note that the cache is currently different depending on whether -j is used or not due to ccache enabling -fdiagnostics-color automatically if stderr is a TTY, which bmake only does if not using -j. The system I used for testing was: WITNESS Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log. The arc was fully populated with src tree files and ccache objects. RAM: 76GiB CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz 2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16 The WITH_FAST_DEPEND feature was used for comparison here as well to show the dramatic time savings with a full cache. buildworld: x buildworld-before + buildworld-ccache-empty * buildworld-ccache-full % buildworld-ccache-full-fastdep # buildworld-fastdep +-------------------------------------------------------------------------------+ |% * # +| |% * # +| |% * # xxx +| | |A | | A| | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 3744.13 3794.31 3752.25 3763.5633 26.935139 + 3 4519 4525.04 4520.73 4521.59 3.1104823 Difference at 95.0% confidence 758.027 +/- 43.4565 20.1412% +/- 1.15466% (Student's t, pooled s = 19.1726) * 3 1823.08 1827.2 1825.62 1825.3 2.0785572 Difference at 95.0% confidence -1938.26 +/- 43.298 -51.5007% +/- 1.15045% (Student's t, pooled s = 19.1026) % 3 1266.96 1279.37 1270.47 1272.2667 6.3971113 Difference at 95.0% confidence -2491.3 +/- 44.3704 -66.1952% +/- 1.17895% (Student's t, pooled s = 19.5758) # 3 3153.34 3155.16 3154.2 3154.2333 0.91045776 Difference at 95.0% confidence -609.33 +/- 43.1943 -16.1902% +/- 1.1477% (Student's t, pooled s = 19.0569) buildkernel: x buildkernel-before + buildkernel-ccache-empty * buildkernel-ccache-empty-fastdep % buildkernel-ccache-full # buildkernel-ccache-full-fastdep @ buildkernel-fastdep +-------------------------------------------------------------------------------+ |# @ % * | |# @ % * x + | |# @ % * xx ++| | MA | | MA| | A | | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 571.57 573.94 571.79 572.43333 1.3094401 + 3 727.97 731.91 728.06 729.31333 2.2492295 Difference at 95.0% confidence 156.88 +/- 4.17129 27.4058% +/- 0.728695% (Student's t, pooled s = 1.84034) * 3 527.1 528.29 528.08 527.82333 0.63516402 Difference at 95.0% confidence -44.61 +/- 2.33254 -7.79305% +/- 0.407478% (Student's t, pooled s = 1.02909) % 3 400.4 401.05 400.62 400.69 0.3306055 Difference at 95.0% confidence -171.743 +/- 2.16453 -30.0023% +/- 0.378128% (Student's t, pooled s = 0.954969) # 3 201.94 203.34 202.28 202.52 0.73020545 Difference at 95.0% confidence -369.913 +/- 2.40293 -64.6212% +/- 0.419774% (Student's t, pooled s = 1.06015) @ 3 369.12 370.57 369.3 369.66333 0.79033748 Difference at 95.0% confidence -202.77 +/- 2.45131 -35.4225% +/- 0.428227% (Student's t, pooled s = 1.0815) [1] https://ccache.samba.org/performance.html [2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html [3] https://reviews.freebsd.org/D3484 [5] https://github.com/jrosdahl/ccache/pull/30 PR: 182944 [4] MFC after: 3 weeks Sponsored by: EMC / Isilon Storage Division Relnotes: yes
2015-11-08 00:50:18 +00:00
${CXX:N${CCACHE_BIN}} ${CXXFLAGS:N-M*} ${LDFLAGS} -o ${.TARGET} \
${OBJS} ${LDADD}
Don't add -lstdc++ to LDADD, just let c++(1) link C++ programs. Record the dependency on ${LIBSTDCPLUSPLUS} similar to ${LIBC}. Suggested by: imp, obrien, peter
2002-04-12 08:17:24 +00:00
.else
Add built-in ccache build support via WITH_CCACHE_BUILD option. ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not used to achieve a safe pseudo-incremental build. This is explained in more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the cache, but with a full cache saves 30-50% in build times. When combined with the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the resulting dependency file, which it does not do when using mkdep(1)/'CC -E'. Stats are provided at the end of this message. This removes the need to modify /etc/make.conf with the CC:= and CXX:= lines which conflicted with external compiler support [3] (causing the bootstrap compiler to not be built which lead to obscure failures [4]), incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid Clang errors with parenthesis, and did not work with META_MODE. The option name was picked to match the existing option in ports. This feature is available for both in-src and out-of-src builds that use /usr/share/mk. Linking, assembly compiles, and pre-processing avoid using ccache since it is only overhead. ccache does nothing special in these modes, although there is no harm in calling it for them. CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap compiler to hash the content of the compiler binary to determine if it should be a cache miss. For external compilers the 'mtime' option is used as it is more efficient and likely to be correct. Future work may optimize the 'content' check using the same checks as whether a bootstrap compiler is needed to be built. The CCACHE_CPP2 pessimization is currently default in our devel/ccache port due to Clang requiring it. Clang's -Wparentheses-equality, -Wtautological-compare, and -Wself-assign warnings do not mix well with compiling already-pre-processed code that may have expanded macros that trigger the warnings. GCC has so far not had this issue so it is allowed to disable the CCACHE_CPP2 default in our port. Sharing a cache between multiple checkouts, or systems, is explained in the ccache manual. Sharing a cache over NFS would likely not be worth it, but syncing cache directories between systems may be useful for an organization. There is also a memcached backend available [5]. Due to using an object directory outside of the source directory though you will need to ensure that both are in the same prefix and all users use the same layout. A possible working layout is as follows: Source: /some/prefix/src1 Source: /some/prefix/src2 Source: /some/prefix/src3 Objdir: /some/prefix/obj Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj' This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace all absolute paths to be relative. Using something like this is required due to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache adds into its hash for the object without CCACHE_BASEDIR. distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc. I have not personally tested this and assume it will not mix well with using the bootstrap compiler. The cache from buildworld can be reused in a subdir by first running 'make buildenv' (from r290424). Note that the cache is currently different depending on whether -j is used or not due to ccache enabling -fdiagnostics-color automatically if stderr is a TTY, which bmake only does if not using -j. The system I used for testing was: WITNESS Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log. The arc was fully populated with src tree files and ccache objects. RAM: 76GiB CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz 2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16 The WITH_FAST_DEPEND feature was used for comparison here as well to show the dramatic time savings with a full cache. buildworld: x buildworld-before + buildworld-ccache-empty * buildworld-ccache-full % buildworld-ccache-full-fastdep # buildworld-fastdep +-------------------------------------------------------------------------------+ |% * # +| |% * # +| |% * # xxx +| | |A | | A| | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 3744.13 3794.31 3752.25 3763.5633 26.935139 + 3 4519 4525.04 4520.73 4521.59 3.1104823 Difference at 95.0% confidence 758.027 +/- 43.4565 20.1412% +/- 1.15466% (Student's t, pooled s = 19.1726) * 3 1823.08 1827.2 1825.62 1825.3 2.0785572 Difference at 95.0% confidence -1938.26 +/- 43.298 -51.5007% +/- 1.15045% (Student's t, pooled s = 19.1026) % 3 1266.96 1279.37 1270.47 1272.2667 6.3971113 Difference at 95.0% confidence -2491.3 +/- 44.3704 -66.1952% +/- 1.17895% (Student's t, pooled s = 19.5758) # 3 3153.34 3155.16 3154.2 3154.2333 0.91045776 Difference at 95.0% confidence -609.33 +/- 43.1943 -16.1902% +/- 1.1477% (Student's t, pooled s = 19.0569) buildkernel: x buildkernel-before + buildkernel-ccache-empty * buildkernel-ccache-empty-fastdep % buildkernel-ccache-full # buildkernel-ccache-full-fastdep @ buildkernel-fastdep +-------------------------------------------------------------------------------+ |# @ % * | |# @ % * x + | |# @ % * xx ++| | MA | | MA| | A | | A | |A | | A | +-------------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 3 571.57 573.94 571.79 572.43333 1.3094401 + 3 727.97 731.91 728.06 729.31333 2.2492295 Difference at 95.0% confidence 156.88 +/- 4.17129 27.4058% +/- 0.728695% (Student's t, pooled s = 1.84034) * 3 527.1 528.29 528.08 527.82333 0.63516402 Difference at 95.0% confidence -44.61 +/- 2.33254 -7.79305% +/- 0.407478% (Student's t, pooled s = 1.02909) % 3 400.4 401.05 400.62 400.69 0.3306055 Difference at 95.0% confidence -171.743 +/- 2.16453 -30.0023% +/- 0.378128% (Student's t, pooled s = 0.954969) # 3 201.94 203.34 202.28 202.52 0.73020545 Difference at 95.0% confidence -369.913 +/- 2.40293 -64.6212% +/- 0.419774% (Student's t, pooled s = 1.06015) @ 3 369.12 370.57 369.3 369.66333 0.79033748 Difference at 95.0% confidence -202.77 +/- 2.45131 -35.4225% +/- 0.428227% (Student's t, pooled s = 1.0815) [1] https://ccache.samba.org/performance.html [2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html [3] https://reviews.freebsd.org/D3484 [5] https://github.com/jrosdahl/ccache/pull/30 PR: 182944 [4] MFC after: 3 weeks Sponsored by: EMC / Isilon Storage Division Relnotes: yes
2015-11-08 00:50:18 +00:00
${CC:N${CCACHE_BIN}} ${CFLAGS:N-M*} ${LDFLAGS} -o ${.TARGET} ${OBJS} \
${LDADD}
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.endif
- CTF knob is now implemented using common scheme: MK_CTF=yes/no is defined based on WITH/WITHOUT_CTF settings, default is WITHOUT_CTF, NO_CTF overrides WITH_CTF (used by Makefile.inc1) - CTFCONVERT_CMD/NORMAL_CTFCONVERT are now defined to empty string if make(1) can handle empty commands
2011-11-30 18:11:49 +00:00
.if ${MK_CTF} != "no"
Conditionalize ctfconvert/ctfmerge runs on make level (.if/.endif) instead of executing a shell on every object or executable/library file. This shaves off more than 30,000 shell invocations during buildworld.
2011-11-29 08:38:47 +00:00
${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${OBJS}
.endif
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.endif # !target(${PROG})
Limit check for target to smaller section of makefile.
1998-02-19 14:53:29 +00:00
Minor refactoring prior to .symbols file changes - Combine .if x and .if !x using .else - Separate out beforelinking dependency - Add comments to clarify .if nesting Sponsored by: ADARA Networks
2012-12-14 18:30:01 +00:00
.endif # !defined(SRCS)
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.if ${MK_DEBUG_FILES} != "no"
Revert r301079. This breaks cross-building with WITH_META_MODE since it will rebuild 'build-tools' during the 'everything' phase. A more proper fix is coming to bmake to implicitly require .META unless .NOMETA (and other restrictions) are in place.
2016-06-03 19:25:36 +00:00
${PROG}: ${PROG_FULL} ${PROGNAME}.debug
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
${OBJCOPY} --strip-debug --add-gnu-debuglink=${PROGNAME}.debug \
${PROG_FULL} ${.TARGET}
Revert r301079. This breaks cross-building with WITH_META_MODE since it will rebuild 'build-tools' during the 'everything' phase. A more proper fix is coming to bmake to implicitly require .META unless .NOMETA (and other restrictions) are in place.
2016-06-03 19:25:36 +00:00
${PROGNAME}.debug: ${PROG_FULL}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
${OBJCOPY} --only-keep-debug ${PROG_FULL} ${.TARGET}
.endif
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_MAN} != "no" && !defined(MAN) && \
Removed _MANPAGES, MANDEPEND and MANSRC. Added MAN which will eventually replace MAN[0-9] and MAN1aout. For now, the old syntax is still supported. Reviewed by: bde
2001-03-26 08:04:11 +00:00
!defined(MAN1) && !defined(MAN2) && !defined(MAN3) && \
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
!defined(MAN4) && !defined(MAN5) && !defined(MAN6) && \
Remove support for installing 1aout section manpages.
2013-01-16 23:21:04 +00:00
!defined(MAN7) && !defined(MAN8) && !defined(MAN9)
Define MAN to ${PROG}.1 if no manpages were specified, but still provide MAN1 for backwards compatibility. Third party software may still have dependancy lines of this form: ${MAN1}: foo.man
2001-03-28 15:07:48 +00:00
MAN= ${PROG}.1
MAN1= ${MAN}
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.endif
Minor refactoring prior to .symbols file changes - Combine .if x and .if !x using .else - Separate out beforelinking dependency - Add comments to clarify .if nesting Sponsored by: ADARA Networks
2012-12-14 18:30:01 +00:00
.endif # defined(PROG)
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Sync FreeBSD's bmake branch with Juniper's internal bmake branch. Requested by: Simon Gerraty <sjg@juniper.net>
2012-08-22 19:25:57 +00:00
.if defined(_SKIP_BUILD)
all:
.else
Consolidate common beforebuild logic. Sponsored by: EMC / Isilon Storage Division
2016-02-16 02:09:48 +00:00
all: ${PROG} ${SCRIPTS}
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_MAN} != "no"
Remove _manpages and _maninstall targets as they are no longer needed. r96164 added them to avoid recursing twice with _SUBDIR. That issue was fixed in bsd.subdir.mk in r291635 for all targets. Sponsored by: EMC / Isilon Storage Division
2016-02-26 22:13:31 +00:00
all: all-man
Removed _MANPAGES, MANDEPEND and MANSRC. Added MAN which will eventually replace MAN[0-9] and MAN1aout. For now, the old syntax is still supported. Reviewed by: bde
2001-03-26 08:04:11 +00:00
.endif
Sync FreeBSD's bmake branch with Juniper's internal bmake branch. Requested by: Simon Gerraty <sjg@juniper.net>
2012-08-22 19:25:57 +00:00
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.if defined(PROG)
CLEANFILES+= ${PROG}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.if ${MK_DEBUG_FILES} != "no"
CLEANFILES+= ${PROG_FULL} ${PROGNAME}.debug
.endif
Whitespace diff reduction between bsd.prog.mk and bsd.lib.mk outputs.
2003-08-31 15:20:17 +00:00
.endif
.if defined(OBJS)
CLEANFILES+= ${OBJS}
.endif
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Two changes to aid in cleaning up sys/boot/ makefiles: - Don't put libc.a as a dependency if program is linked with -nostdlib. - Added INTERNALPROG (by analogy to INTERNALLIB) for programs which are built only for its side effect and shold not be installed.
2004-02-09 14:05:17 +00:00
.include <bsd.libnames.mk>
Removed NOEXTRADEPEND hack. This was only for an old version of makeworld.
2000-01-09 15:40:32 +00:00
.if defined(PROG)
META_MODE: Don't generate or read _EXTRADEPEND dependencies when using filemon. The DPADD data in .depend will be redundant with what is in the .meta file. Also extend NO_EXTRADEPEND support to bsd.prog.mk. Approved by: re (blanket, META_MODE) Sponsored by: EMC / Isilon Storage Division
2016-06-21 21:55:03 +00:00
.if !defined(NO_EXTRADEPEND)
Use `ld -f' (actually `cc -Wl,-f') at `make depend' time to generate almost perfect dependencies on crt0's and libraries. DPADD and bsd.libnames.mk should go away soon. Use a new _EXTRADEPEND target to implement this and to avoid editing of .depend when .depend isn;t being rebuilt. The afterdepend target doesn't seem to be good for anything and is now unused. Fixed LDDESTDIR for the DESTDIR case when ${SHLIBDIR} != /usr/lib. Added commented-out -nostdlib to LDDESTDIR for the DESTDIR case. The wrong libraries may be used without this; however it breaks linkage to crt0 and libc.
1997-04-09 16:10:27 +00:00
_EXTRADEPEND:
Two changes to aid in cleaning up sys/boot/ makefiles: - Don't put libc.a as a dependency if program is linked with -nostdlib. - Added INTERNALPROG (by analogy to INTERNALLIB) for programs which are built only for its side effect and shold not be installed.
2004-02-09 14:05:17 +00:00
.if defined(LDFLAGS) && !empty(LDFLAGS:M-nostdlib)
.if defined(DPADD) && !empty(DPADD)
Make the extra dependencies in DPADD be dependencies of PROG_FULL and SHLIB_NAME_FULL so that the full binary is relinked when a dependency changes. Right now the existing full binary is left as-is and only the objcopy to remove debug symbols is run. Differential Revision: https://reviews.freebsd.org/D1834 Reviewed by: emaste MFC after: 3 days
2015-02-13 17:33:27 +00:00
echo ${PROG_FULL}: ${DPADD} >> ${DEPENDFILE}
Two changes to aid in cleaning up sys/boot/ makefiles: - Don't put libc.a as a dependency if program is linked with -nostdlib. - Added INTERNALPROG (by analogy to INTERNALLIB) for programs which are built only for its side effect and shold not be installed.
2004-02-09 14:05:17 +00:00
.endif
.else
Make the extra dependencies in DPADD be dependencies of PROG_FULL and SHLIB_NAME_FULL so that the full binary is relinked when a dependency changes. Right now the existing full binary is left as-is and only the objcopy to remove debug symbols is run. Differential Revision: https://reviews.freebsd.org/D1834 Reviewed by: emaste MFC after: 3 days
2015-02-13 17:33:27 +00:00
echo ${PROG_FULL}: ${LIBC} ${DPADD} >> ${DEPENDFILE}
Eliminate EARLY_BUILD flag. It is redundant and means MK_CLANG_FULL=no and MK_LLDB=no, so set those explicitly (now that we can do that). Simplify tests for these variables as well, since we know they will always be defined regardless of the phase of the build.
2014-05-10 16:38:03 +00:00
.if defined(PROG_CXX)
There's no need to guess at the COMPILER_TYPE to pass it down. We guess wrong for buildkernel when CC=gcc49, say. Eliminate all the guessing. COMPILER_TYPE propigates properly on its own, if specified, and we guess it correctly otherwise lower in the build. Also, fix conditionals for armv6hf when using an external compiler chain. They were broken before, but unused. Also, prefer checking the compiler type over CLANG_IS_CC since the latter is only supposed to be used to determine what symlinks to install (more fixes to follow).
2014-03-30 23:43:30 +00:00
.if ${COMPILER_TYPE} == "clang" && empty(CXXFLAGS:M-stdlib=libstdc++)
Make the extra dependencies in DPADD be dependencies of PROG_FULL and SHLIB_NAME_FULL so that the full binary is relinked when a dependency changes. Right now the existing full binary is left as-is and only the objcopy to remove debug symbols is run. Differential Revision: https://reviews.freebsd.org/D1834 Reviewed by: emaste MFC after: 3 days
2015-02-13 17:33:27 +00:00
echo ${PROG_FULL}: ${LIBCPLUSPLUS} >> ${DEPENDFILE}
When using -stdlib=libc++, add the correct dependency to .depend in bsd.prog.mk. Submitted by: Yamaya Takashi <yamayan@kbh.biglobe.ne.jp> MFC after: 2 weeks
2012-08-25 19:30:15 +00:00
.else
Make the extra dependencies in DPADD be dependencies of PROG_FULL and SHLIB_NAME_FULL so that the full binary is relinked when a dependency changes. Right now the existing full binary is left as-is and only the objcopy to remove debug symbols is run. Differential Revision: https://reviews.freebsd.org/D1834 Reviewed by: emaste MFC after: 3 days
2015-02-13 17:33:27 +00:00
echo ${PROG_FULL}: ${LIBSTDCPLUSPLUS} >> ${DEPENDFILE}
Don't add -lstdc++ to LDADD, just let c++(1) link C++ programs. Record the dependency on ${LIBSTDCPLUSPLUS} similar to ${LIBC}. Suggested by: imp, obrien, peter
2002-04-12 08:17:24 +00:00
.endif
A first cut at some rules for building elf shared libs. Of particular note, using "-Wl,-f" to generate a library objects list doesn't work anymore since the hack to ld hasn't been incorporated into binutils-2.8. (and the -f switch is used for something else already) This is disabled by default, don't panic! :-)
1997-08-30 23:23:18 +00:00
.endif
Two changes to aid in cleaning up sys/boot/ makefiles: - Don't put libc.a as a dependency if program is linked with -nostdlib. - Added INTERNALPROG (by analogy to INTERNALLIB) for programs which are built only for its side effect and shold not be installed.
2004-02-09 14:05:17 +00:00
.endif
META_MODE: Don't generate or read _EXTRADEPEND dependencies when using filemon. The DPADD data in .depend will be redundant with what is in the .meta file. Also extend NO_EXTRADEPEND support to bsd.prog.mk. Approved by: re (blanket, META_MODE) Sponsored by: EMC / Isilon Storage Division
2016-06-21 21:55:03 +00:00
.endif # !defined(NO_EXTRADEPEND)
When using -stdlib=libc++, add the correct dependency to .depend in bsd.prog.mk. Submitted by: Yamaya Takashi <yamayan@kbh.biglobe.ne.jp> MFC after: 2 weeks
2012-08-25 19:30:15 +00:00
.endif
Use `ld -f' (actually `cc -Wl,-f') at `make depend' time to generate almost perfect dependencies on crt0's and libraries. DPADD and bsd.libnames.mk should go away soon. Use a new _EXTRADEPEND target to implement this and to avoid editing of .depend when .depend isn;t being rebuilt. The afterdepend target doesn't seem to be good for anything and is now unused. Fixed LDDESTDIR for the DESTDIR case when ${SHLIBDIR} != /usr/lib. Added commented-out -nostdlib to LDDESTDIR for the DESTDIR case. The wrong libraries may be used without this; however it breaks linkage to crt0 and libc.
1997-04-09 16:10:27 +00:00
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.if !target(install)
Install precious programs with -S.
2004-11-12 13:24:34 +00:00
.if defined(PRECIOUSPROG)
NOFSCHG -> NO_FSCHG
2004-12-21 09:53:14 +00:00
.if !defined(NO_FSCHG)
Introduce the PRECIOUSPROG knob in bsd.prog.mk, similar to PRECIOUSLIB from bsd.lib.mk. The side effect of this is making installing the world under jail(8) possible by using another knob, NOFSCHG. Reviewed by: oliver
2004-11-03 18:01:21 +00:00
INSTALLFLAGS+= -fschg
.endif
Install precious programs with -S.
2004-11-12 13:24:34 +00:00
INSTALLFLAGS+= -S
.endif
Introduce the PRECIOUSPROG knob in bsd.prog.mk, similar to PRECIOUSLIB from bsd.lib.mk. The side effect of this is making installing the world under jail(8) possible by using another knob, NOFSCHG. Reviewed by: oliver
2004-11-03 18:01:21 +00:00
Add variable INSTALLFLAGS_EDIT used to remove arbitrary INSTALLFLAGS. Specifically intended for removing -fschg ("INSTALLFLAGS_EDIT=:S/schg/uchg/") this makes the NOFSCHG flag redundant. NOFSCHG will still be honoured by bsd.lib.mk but is valid for buildworld only. NOFSCHG is still implemented in the old way (ie. _not_ ".if NOFSCHG then { INSTALLFLAGS_EDIT+=:S/schg/,/ }" to emphasize the fact that NOFSCHG is only supported in a limited fashion and for buildworld. The interface and implementation are such that future use of flags such as sappnd can also be easily removed or altered (perhaps to uappnd). This commit brought to you by the letters B, D, and E, and the numbers six, one, thirteen, and three.
1999-07-31 20:27:33 +00:00
_INSTALLFLAGS:= ${INSTALLFLAGS}
.for ie in ${INSTALLFLAGS_EDIT}
_INSTALLFLAGS:= ${_INSTALLFLAGS${ie}}
.endfor
Two changes to aid in cleaning up sys/boot/ makefiles: - Don't put libc.a as a dependency if program is linked with -nostdlib. - Added INTERNALPROG (by analogy to INTERNALLIB) for programs which are built only for its side effect and shold not be installed.
2004-02-09 14:05:17 +00:00
.if !target(realinstall) && !defined(INTERNALPROG)
Install PROG before SCRIPTS and FILES, but make sure LINKS are still processed last. This backs out part of the backout in previous revision. Install the manpages before descending into SUBDIRs.
2002-05-07 15:30:49 +00:00
realinstall: _proginstall
Try really hard to fix parallel installs. Add a bunch of .ORDER directives to ensure that all realinstall sub-tasks are executed after beforeinstall, similarly ensure that all afterinstall sub- tasks are executed after realinstall. Demonstration: all: task1 task2 .ORDER: task1 task2 task2: task2_subtask .ORDER: task1 task2_subtask task1 task2 task2_subtask: @sleep `jot -r 1 0 1.0` @echo ${.TARGET} Without the second .ORDER directive, task2_subtask can be run in parallel with task1. Spotted by: Andrea Campi <andrea@webcom.it>
2002-07-03 12:28:03 +00:00
.ORDER: beforeinstall _proginstall
Install PROG before SCRIPTS and FILES, but make sure LINKS are still processed last. This backs out part of the backout in previous revision. Install the manpages before descending into SUBDIRs.
2002-05-07 15:30:49 +00:00
_proginstall:
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.if defined(PROG)
Makes it more flexible to tag and define a target package
2015-02-13 00:16:05 +00:00
${INSTALL} ${TAG_ARGS} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} \
Introduce ${PROGNAME}, the name that the program will be installed as, if different from ${PROG}. (The name PROGNAME was stolen from NetBSD.) Reviewed by: bde
2001-04-02 11:44:20 +00:00
${_INSTALLFLAGS} ${PROG} ${DESTDIR}${BINDIR}/${PROGNAME}
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.if ${MK_DEBUG_FILES} != "no"
.if defined(DEBUGMKDIR)
MFH r289384-r293170 Sponsored by: The FreeBSD Foundation
2016-01-04 19:19:48 +00:00
${INSTALL} ${TAG_ARGS:D${TAG_ARGS},debug} -d ${DESTDIR}${DEBUGFILEDIR}/
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
.endif
Makes it more flexible to tag and define a target package
2015-02-13 00:16:05 +00:00
${INSTALL} ${TAG_ARGS:D${TAG_ARGS},debug} -o ${BINOWN} -g ${BINGRP} -m ${DEBUGMODE} \
Add a new knob WITH_DEBUG_FILES to control the building of standalone debug files for userland programs and libraries. The "-g" debug flag is automatically applied when WITH_DEBUG_FILES is set. The debug files are now named ${prog}.debug and ${shlib}.debug for consistency with other systems and documentation. In addition they are installed under /usr/lib/debug, to simplify the process of installing them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the base system place the standalone debug files in a .debug subdirectory. GDB automatically searches both of these directories for standalone debug files. Thanks to everyone who contributed changes, review, and testing during development.
2013-06-07 21:40:02 +00:00
${PROGNAME}.debug ${DESTDIR}${DEBUGFILEDIR}/${PROGNAME}.debug
.endif
Introduce ${PROGNAME}, the name that the program will be installed as, if different from ${PROG}. (The name PROGNAME was stolen from NetBSD.) Reviewed by: bde
2001-04-02 11:44:20 +00:00
.endif
Make sure the only thing that follows .endif or .else is a comment.
2005-04-11 07:13:29 +00:00
.endif # !target(realinstall)
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
Introduce SCRIPTS for bsd.prog.mk. See bsd.README for details. Idea stolen from NetBSD. Reviewed by: bde
2001-04-07 11:13:46 +00:00
.if defined(SCRIPTS) && !empty(SCRIPTS)
realinstall: _scriptsinstall
Try really hard to fix parallel installs. Add a bunch of .ORDER directives to ensure that all realinstall sub-tasks are executed after beforeinstall, similarly ensure that all afterinstall sub- tasks are executed after realinstall. Demonstration: all: task1 task2 .ORDER: task1 task2 task2: task2_subtask .ORDER: task1 task2_subtask task1 task2 task2_subtask: @sleep `jot -r 1 0 1.0` @echo ${.TARGET} Without the second .ORDER directive, task2_subtask can be run in parallel with task1. Spotted by: Andrea Campi <andrea@webcom.it>
2002-07-03 12:28:03 +00:00
.ORDER: beforeinstall _scriptsinstall
Introduce SCRIPTS for bsd.prog.mk. See bsd.README for details. Idea stolen from NetBSD. Reviewed by: bde
2001-04-07 11:13:46 +00:00
SCRIPTSDIR?= ${BINDIR}
SCRIPTSOWN?= ${BINOWN}
SCRIPTSGRP?= ${BINGRP}
SCRIPTSMODE?= ${BINMODE}
Handle staging SYMKINKS and LINKS better
2013-01-29 00:07:54 +00:00
STAGE_AS_SETS+= scripts
stage_as.scripts: ${SCRIPTS}
FLAGS.stage_as.scripts= -m ${SCRIPTSMODE}
STAGE_FILES_DIR.scripts= ${STAGE_OBJTOP}
Introduce SCRIPTS for bsd.prog.mk. See bsd.README for details. Idea stolen from NetBSD. Reviewed by: bde
2001-04-07 11:13:46 +00:00
.for script in ${SCRIPTS}
.if defined(SCRIPTSNAME)
SCRIPTSNAME_${script:T}?= ${SCRIPTSNAME}
.else
SCRIPTSNAME_${script:T}?= ${script:T:R}
.endif
SCRIPTSDIR_${script:T}?= ${SCRIPTSDIR}
SCRIPTSOWN_${script:T}?= ${SCRIPTSOWN}
SCRIPTSGRP_${script:T}?= ${SCRIPTSGRP}
SCRIPTSMODE_${script:T}?= ${SCRIPTSMODE}
Handle staging SYMKINKS and LINKS better
2013-01-29 00:07:54 +00:00
STAGE_AS_${script:T}= ${SCRIPTSDIR_${script:T}}/${SCRIPTSNAME_${script:T}}
FILES support for bsd.prog.mk. See bsd.README for details. Stolen from: NetBSD
2001-12-17 13:59:35 +00:00
_scriptsinstall: _SCRIPTSINS_${script:T}
_SCRIPTSINS_${script:T}: ${script}
Makes it more flexible to tag and define a target package
2015-02-13 00:16:05 +00:00
${INSTALL} ${TAG_ARGS} -o ${SCRIPTSOWN_${.ALLSRC:T}} \
Introduce SCRIPTS for bsd.prog.mk. See bsd.README for details. Idea stolen from NetBSD. Reviewed by: bde
2001-04-07 11:13:46 +00:00
-g ${SCRIPTSGRP_${.ALLSRC:T}} -m ${SCRIPTSMODE_${.ALLSRC:T}} \
${INSTALLFLAGS} aren't suitable for installing ${SCRIPTS} and ${FILES}.
2002-04-17 16:29:02 +00:00
${.ALLSRC} \
Introduce SCRIPTS for bsd.prog.mk. See bsd.README for details. Idea stolen from NetBSD. Reviewed by: bde
2001-04-07 11:13:46 +00:00
${DESTDIR}${SCRIPTSDIR_${.ALLSRC:T}}/${SCRIPTSNAME_${.ALLSRC:T}}
.endfor
.endif
Reimplemented bsd.nls.mk using bsd.files.mk and bsd.links.mk. Provided the (previously missing) dependency on source files for intermediate .msg files. Provided the default for NLSSRCDIR (defaults to .CURDIR). Slightly changed the API: NLS should now list plain locale names, without the .msg suffix. When included from bsd.prog.mk, NLSNAME defaults to PROG.
2002-07-02 12:37:09 +00:00
NLSNAME?= ${PROG}
.include <bsd.nls.mk>
Add a new bsd.confs.mk similar to bsd.files.mk or bsd.incs.mk It defines a CONFS variable for all files supposed to be installed as a configuration file and handle as such
2015-10-09 21:57:42 +00:00
.include <bsd.confs.mk>
Reimplement FILES support using bsd.files.mk with the same set of features as in recently added bsd.incs.mk (FILESGROUPS, accessibility from both bsd.prog.mk and bsd.lib.mk, de-pessimized typical installation path, etc.) New standard targets: buildfiles, installfiles, and files (buildfiles + installfiles).
2002-06-03 14:49:34 +00:00
.include <bsd.files.mk>
Rename `includes' to `buildincludes'. Rename `incsinstall' to `installincludes'. Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'. `buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
2002-05-15 16:19:54 +00:00
.include <bsd.incs.mk>
Handle installation of hard and symbolic links via a seperate .mk file.
2002-07-02 12:16:54 +00:00
.include <bsd.links.mk>
Added new bsd.incs.mk which handles installing of header files via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to handle symlinking include files. Allow for multiple groups of include files to be installed, with the powerful INCSGROUPS knob. Documentation to follow. Added standard `includes' and `incsinstall' targets, use them in Makefile.inc1. Headers from the following makefiles were not installed before (during `includes' in Makefile.inc1): kerberos5/lib/libtelnet/Makefile lib/libbz2/Makefile lib/libdevinfo/Makefile lib/libform/Makefile lib/libisc/Makefile lib/libmenu/Makefile lib/libmilter/Makefile lib/libpanel/Makefile Replaced all `beforeinstall' targets for installing includes with the INCS stuff. Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS, and for compatibility with NetBSD. Similarly for INCOWN, INCGRP, and INCMODE. Consistently use INCLUDEDIR instead of /usr/include. gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes were only lightly tested due to the missing contrib/libstdc++-v3. I fully tested the pre-WIP_GCC31 version of this patch with the contrib/libstdc++.295 stuff. These changes have been tested on i386 with the -DNO_WERROR "make world" and "make release".
2002-05-12 16:01:00 +00:00
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_MAN} != "no"
Remove _manpages and _maninstall targets as they are no longer needed. r96164 added them to avoid recursing twice with _SUBDIR. That issue was fixed in bsd.subdir.mk in r291635 for all targets. Sponsored by: EMC / Isilon Storage Division
2016-02-26 22:13:31 +00:00
realinstall: maninstall
.ORDER: beforeinstall maninstall
Spplat our 1.1.5 `mk' ifiles over the top of the 4.4 ones. So far as I can tell, this is ts the right thing to do.
1994-08-04 21:09:27 +00:00
.endif
Install PROG before SCRIPTS and FILES, but make sure LINKS are still processed last. This backs out part of the backout in previous revision. Install the manpages before descending into SUBDIRs.
2002-05-07 15:30:49 +00:00
Fix most cases of bsd.progs.mk running duplicate or missing commands. This mostly fixes an interaction with bsd.test.mk with PROGS and SCRIPTS. This was most notable with 'make clean' and 'make install', which r281055 and r272055 attempted to address but were inadequate. It also addresses similar issues in bsd.progs.mk when not using bsd.test.mk. This also fixes cases of NOT running commands in the parent when using bsd.progs.mk: - 'make clean' was not run for the main process for Makefiles which had both FILES and SUBDIR but no PROGS or SCRIPTS. This usually was just a leftover Kyuafile.auto. One such example is usr.bin/bmake/tests/sysmk/t1/2. - 'make obj' was not running in the current directory with bsd.test.mk due to early inclusion of bsd.subdir.mk. This was not really a problem due to the SUBDIRS using 'mkdir -p' for their objdirs. There were subtle bugs causing this wrong behavior: 1. bsd.progs.mk needs to set SCRIPTS to empty when recursing to avoid the sub-makes from installing, cleaning or building the SCRIPTS; only the parent make should be doing this. r281055 effectively did the same but wasn't enough. 2. CLEANFILES may contain (especially from *.test.mk) files which only the parent should clean, such as from FILES and SCRIPTS. To resolve sub-makes also cleaning these, reset CLEANFILES and CLEANDIRS in the children before including bsd.prog.mk. A tempting alternative would be to only handle CLEANFILES in the parent but then the child bsd.prog.mk CLEANFILES of per-PROGS wouldn't be setup. 3. bsd.subdir.mk was included too soon in bsd.test.mk. It needs to be included after bsd.prog.mk as the SCRIPTS logic is short-circuitted if 'install:' is already defined (which bsd.subdir.mk does). There is actually no need to include bsd.subdir.mk from bsd.test.mk as bsd.prog.mk and bsd.obj.mk will do so in the proper order. The description in r257095 covers this for FILES and was fixed differently, though changing the handling of target(install) in bsd.prog.mk may make sense after more research. 4. bsd.progs.mk had extra logic to handle recursing SCRIPTS if PROGS was empty, which isn't its business to be doing. SCRIPTS is handled fine by bsd.prog.mk. This mostly reverts and reworks the fix in r259209 and partially reverts r272055. 5. bsd.progs.mk has no need to depend 'all:' on SCRIPTS and FILES. These are handled by bsd.prog.mk/bsd.files.mk fine. This also partially reverts r272055. 6. bsd.progs.mk was not drop-in safe for bsd.prog.mk. Move the PROGS check from r273186 to allow it to be used safely. Specific tested cases: SCRIPTS:no PROGS:no FILES:yes SUBDIR:yes usr.bin/bmake/tests/sysmk/t1/2 SCRIPTS:yes PROGS:no FILES:yes SUBDIR:no usr.bin/bmake/tests/sysmk/t1/2/1 SCRIPTS:yes PROGS:yes FILES:yes SUBDIR:yes lib/libthr/tests SCRIPTS:yes PROGS:no FILES:yes SUBDIR:no usr.bin/yacc/tests libexec/atf/atf-sh/tests A full buildworld/installworld/clean comparison with mtree was also done. The only relevant difference was the new fixed behavior of removing Kyuafile.auto from the objdir in 'clean'. Converting SCRIPTS to be a special case FILES group will make this less fragile and is being explored. One known remaining issue is 'cleandepend' removing the tags files for every recursive call. Note that the 'make clean' command runs for the CURDIR last, which can make it appear to run multiple times when cleaning in tests/, but each command is for a SUBDIR returning up the chain. This is purely bsd.subdir.mk behavior. PR: 191055 PR: 191955 MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-09-23 23:20:49 +00:00
.endif # !target(install)
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.if !target(lint)
Extend the lint handling a bit. o Make it possible to prevent parts of the tree from being linted (say) during a 'make world' by setting NOLINT in a leaf Makefile. o Make "make lint" work (better) for executable programs. o Clean up (nuke!) a syntax damaged pipeline.
2002-09-20 19:32:51 +00:00
lint: ${SRCS:M*.c}
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.if defined(PROG)
Extend the lint handling a bit. o Make it possible to prevent parts of the tree from being linted (say) during a 'make world' by setting NOLINT in a leaf Makefile. o Make "make lint" work (better) for executable programs. o Clean up (nuke!) a syntax damaged pipeline.
2002-09-20 19:32:51 +00:00
${LINT} ${LINTFLAGS} ${CFLAGS:M-[DIU]*} ${.ALLSRC}
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.endif
.endif
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_MAN} != "no"
BSD 4.4 Lite Share Sources
1994-05-30 19:09:18 +00:00
.include <bsd.man.mk>
Introduce the 'regress' target. Silently approved by: -hackers, -current
1998-03-12 20:02:17 +00:00
.endif
FAST_DEPEND: Rework how guessed dependencies are handled. Rather than depend on .depend not existing, check the actual .depend.OBJ file that will be used for that object. If it doesn't exist then use the guessed dependencies. FAST_DEPEND may never have a .depend file. Not having one means all of the previous logic would over-depend all object files on all headers which is not what we wanted. It also means that if a .depend is generated before a build is done for _EXTRADEPEND (such as for PROG or LIB) then all of these dependencies would not be used since the .depend wasn't generated from mkdep and the real .depend.* files are not generated until the build. Sponsored by: EMC / Isilon Storage Division
2016-02-24 17:19:05 +00:00
.if defined(PROG)
OBJS_DEPEND_GUESS+= ${SRCS:M*.h}
Add guessed dependencies to OBJS after bsd.dep.mk in case of it adding to SRCS. This was a regression in r295985. bsd.dep.mk adds to SRCS for dtrace probes, yacc grammars and some others. The code that is moving is planned to be removed once FAST_DEPEND is default (and the only option) though since FAST_DEPEND doesn't use this. Pointyhat to: bdrewery Sponsored by: EMC / Isilon Storage Division
2016-03-02 21:03:42 +00:00
.endif
.include <bsd.dep.mk>
Import bsd.clang-analyze.mk based on NetBSD's version. This allows 'make analyze' or 'make OBJ.clang-analyzer' to run the Clang static analyzer and present results on stdout. Obtained from: NetBSD (CVS Rev. 1.3) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D5449
2016-02-26 22:14:00 +00:00
.include <bsd.clang-analyze.mk>
Bring in my changes for removing the pestilent obj links (unless you really want them) from /usr/src. This is the final version of the patches, incorporating the feedback I've received from -current.
1996-06-24 04:26:21 +00:00
.include <bsd.obj.mk>
Bring in the WARNS directive from NetBSD, localized in a new bsd.sys.mk to avoid polluting sys.mk. This directive controls the addition of compiler warning flags to CFLAGS in a relatively compiler-neutral manner. The idea is that WARNS can be set in Makefile.inc or in individual Makefiles as they become clean, to prevent the introduction of new warnings in the code. -Werror is added by default
2001-05-19 23:18:21 +00:00
.include <bsd.sys.mk>
Reference in New Issue Copy Permalink