freebsd-nq/sys/dev/netmap/if_igb_netmap.h

357 lines
10 KiB
C
Raw Normal View History

Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Copyright (C) 2011 Universita` di Pisa. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* $FreeBSD$
* $Id: if_igb_netmap.h 10627 2012-02-23 19:37:15Z luigi $
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*
* Netmap support for igb, partly contributed by Ahmed Kooli
* For details on netmap support please see ixgbe_netmap.h
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#include <net/netmap.h>
#include <sys/selinfo.h>
#include <vm/vm.h>
#include <vm/pmap.h> /* vtophys ? */
#include <dev/netmap/netmap_kern.h>
/*
* wrapper to export locks to the generic code
*/
static void
igb_netmap_lock_wrapper(struct ifnet *ifp, int what, u_int queueid)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct adapter *adapter = ifp->if_softc;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
ASSERT(queueid < adapter->num_queues);
switch (what) {
case NETMAP_CORE_LOCK:
IGB_CORE_LOCK(adapter);
break;
case NETMAP_CORE_UNLOCK:
IGB_CORE_UNLOCK(adapter);
break;
case NETMAP_TX_LOCK:
IGB_TX_LOCK(&adapter->tx_rings[queueid]);
break;
case NETMAP_TX_UNLOCK:
IGB_TX_UNLOCK(&adapter->tx_rings[queueid]);
break;
case NETMAP_RX_LOCK:
IGB_RX_LOCK(&adapter->rx_rings[queueid]);
break;
case NETMAP_RX_UNLOCK:
IGB_RX_UNLOCK(&adapter->rx_rings[queueid]);
break;
}
}
/*
* register-unregister routine
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
static int
igb_netmap_reg(struct ifnet *ifp, int onoff)
{
struct adapter *adapter = ifp->if_softc;
struct netmap_adapter *na = NA(ifp);
int error = 0;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
if (na == NULL)
return EINVAL; /* no netmap support here */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
igb_disable_intr(adapter);
/* Tell the stack that the interface is no longer active */
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
if (onoff) {
ifp->if_capenable |= IFCAP_NETMAP;
na->if_transmit = ifp->if_transmit;
ifp->if_transmit = netmap_start;
igb_init_locked(adapter);
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) == 0) {
error = ENOMEM;
goto fail;
}
} else {
fail:
/* restore if_transmit */
ifp->if_transmit = na->if_transmit;
ifp->if_capenable &= ~IFCAP_NETMAP;
igb_init_locked(adapter); /* also enable intr */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
return (error);
}
/*
* Reconcile kernel and user view of the transmit ring.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
static int
igb_netmap_txsync(struct ifnet *ifp, u_int ring_nr, int do_lock)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct adapter *adapter = ifp->if_softc;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct tx_ring *txr = &adapter->tx_rings[ring_nr];
struct netmap_adapter *na = NA(ifp);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_kring *kring = &na->tx_rings[ring_nr];
struct netmap_ring *ring = kring->ring;
u_int j, k, l, n = 0, lim = kring->nkr_num_slots - 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* generate an interrupt approximately every half ring */
u_int report_frequency = kring->nkr_num_slots >> 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
k = ring->cur;
if (k > lim)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return netmap_ring_reinit(kring);
if (do_lock)
IGB_TX_LOCK(txr);
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
BUS_DMASYNC_POSTREAD);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* check for new packets to send.
* j indexes the netmap ring, l indexes the nic ring, and
* j = kring->nr_hwcur, l = E1000_TDT (not tracked),
* j == (l + kring->nkr_hwofs) % ring_size
*/
j = kring->nr_hwcur;
if (j != k) { /* we have new packets to send */
/* 82575 needs the queue index added */
u32 olinfo_status =
(adapter->hw.mac.type == e1000_82575) ? (txr->me << 4) : 0;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
l = netmap_idx_k2n(kring, j);
for (n = 0; j != k; n++) {
/* slot is the current slot in the netmap ring */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_slot *slot = &ring->slot[j];
/* curr is the current slot in the nic ring */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
union e1000_adv_tx_desc *curr =
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
(union e1000_adv_tx_desc *)&txr->tx_base[l];
struct igb_tx_buffer *txbuf = &txr->tx_buffers[l];
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
int flags = ((slot->flags & NS_REPORT) ||
j == 0 || j == report_frequency) ?
E1000_ADVTXD_DCMD_RS : 0;
uint64_t paddr;
void *addr = PNMB(slot, &paddr);
u_int len = slot->len;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (addr == netmap_buffer_base || len > NETMAP_BUF_SIZE) {
if (do_lock)
IGB_TX_UNLOCK(txr);
return netmap_ring_reinit(kring);
}
slot->flags &= ~NS_REPORT;
if (slot->flags & NS_BUF_CHANGED) {
/* buffer has changed, reload map */
netmap_reload_map(txr->txtag, txbuf->map, addr);
slot->flags &= ~NS_BUF_CHANGED;
}
curr->read.buffer_addr = htole64(paddr);
// XXX check olinfo and cmd_type_len
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
curr->read.olinfo_status =
htole32(olinfo_status |
(len<< E1000_ADVTXD_PAYLEN_SHIFT));
curr->read.cmd_type_len =
htole32(len | E1000_ADVTXD_DTYP_DATA |
E1000_ADVTXD_DCMD_IFCS |
E1000_ADVTXD_DCMD_DEXT |
E1000_ADVTXD_DCMD_EOP | flags);
bus_dmamap_sync(txr->txtag, txbuf->map,
BUS_DMASYNC_PREWRITE);
j = (j == lim) ? 0 : j + 1;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
l = (l == lim) ? 0 : l + 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
kring->nr_hwcur = k; /* the saved ring->cur */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
kring->nr_hwavail -= n;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
/* Set the watchdog XXX ? */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
txr->queue_status = IGB_QUEUE_WORKING;
txr->watchdog_time = ticks;
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
E1000_WRITE_REG(&adapter->hw, E1000_TDT(txr->me), l);
}
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
if (n == 0 || kring->nr_hwavail < 1) {
int delta;
/* record completed transmissions using TDH */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
l = E1000_READ_REG(&adapter->hw, E1000_TDH(ring_nr));
if (l >= kring->nkr_num_slots) { /* XXX can it happen ? */
D("TDH wrap %d", l);
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
l -= kring->nkr_num_slots;
}
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
delta = l - txr->next_to_clean;
if (delta) {
/* some completed, increment hwavail. */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
if (delta < 0)
delta += kring->nkr_num_slots;
txr->next_to_clean = l;
kring->nr_hwavail += delta;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/* update avail to what the kernel knows */
ring->avail = kring->nr_hwavail;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (do_lock)
IGB_TX_UNLOCK(txr);
return 0;
}
/*
* Reconcile kernel and user view of the receive ring.
*/
static int
igb_netmap_rxsync(struct ifnet *ifp, u_int ring_nr, int do_lock)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct adapter *adapter = ifp->if_softc;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct rx_ring *rxr = &adapter->rx_rings[ring_nr];
struct netmap_adapter *na = NA(ifp);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_kring *kring = &na->rx_rings[ring_nr];
struct netmap_ring *ring = kring->ring;
u_int j, l, n, lim = kring->nkr_num_slots - 1;
int force_update = do_lock || kring->nr_kflags & NKR_PENDINTR;
u_int k = ring->cur, resvd = ring->reserved;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
k = ring->cur;
if (k > lim)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return netmap_ring_reinit(kring);
if (do_lock)
IGB_RX_LOCK(rxr);
/* XXX check sync modes */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
/*
* import newly received packets into the netmap ring.
* j is an index in the netmap ring, l in the NIC ring.
*/
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
l = rxr->next_to_check;
j = netmap_idx_n2k(kring, l);
if (netmap_no_pendintr || force_update) {
for (n = 0; ; n++) {
union e1000_adv_rx_desc *curr = &rxr->rx_base[l];
uint32_t staterr = le32toh(curr->wb.upper.status_error);
if ((staterr & E1000_RXD_STAT_DD) == 0)
break;
ring->slot[j].len = le16toh(curr->wb.upper.length);
bus_dmamap_sync(rxr->ptag,
rxr->rx_buffers[l].pmap, BUS_DMASYNC_POSTREAD);
j = (j == lim) ? 0 : j + 1;
l = (l == lim) ? 0 : l + 1;
}
if (n) { /* update the state variables */
rxr->next_to_check = l;
kring->nr_hwavail += n;
}
kring->nr_kflags &= ~NKR_PENDINTR;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/* skip past packets that userspace has released */
j = kring->nr_hwcur; /* netmap ring index */
if (resvd > 0) {
if (resvd + ring->avail >= lim + 1) {
D("XXX invalid reserve/avail %d %d", resvd, ring->avail);
ring->reserved = resvd = 0; // XXX panic...
}
k = (k >= resvd) ? k - resvd : k + lim + 1 - resvd;
}
if (j != k) { /* userspace has released some packets. */
l = netmap_idx_k2n(kring, j);
for (n = 0; j != k; n++) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_slot *slot = ring->slot + j;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
union e1000_adv_rx_desc *curr = &rxr->rx_base[l];
struct igb_rx_buf *rxbuf = rxr->rx_buffers + l;
uint64_t paddr;
void *addr = PNMB(slot, &paddr);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (addr == netmap_buffer_base) { /* bad buf */
if (do_lock)
IGB_RX_UNLOCK(rxr);
return netmap_ring_reinit(kring);
}
if (slot->flags & NS_BUF_CHANGED) {
netmap_reload_map(rxr->ptag, rxbuf->pmap, addr);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
slot->flags &= ~NS_BUF_CHANGED;
}
curr->read.pkt_addr = htole64(paddr);
curr->wb.upper.status_error = 0;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
bus_dmamap_sync(rxr->ptag, rxbuf->pmap,
BUS_DMASYNC_PREREAD);
j = (j == lim) ? 0 : j + 1;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
l = (l == lim) ? 0 : l + 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
kring->nr_hwavail -= n;
kring->nr_hwcur = k;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/*
* IMPORTANT: we must leave one free slot in the ring,
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
* so move l back by one unit
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
l = (l == 0) ? lim : l - 1;
E1000_WRITE_REG(&adapter->hw, E1000_RDT(rxr->me), l);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/* tell userspace that there are new packets */
ring->avail = kring->nr_hwavail - resvd;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (do_lock)
IGB_RX_UNLOCK(rxr);
return 0;
}
static void
igb_netmap_attach(struct adapter *adapter)
{
struct netmap_adapter na;
bzero(&na, sizeof(na));
na.ifp = adapter->ifp;
na.separate_locks = 1;
na.num_tx_desc = adapter->num_tx_desc;
na.num_rx_desc = adapter->num_rx_desc;
na.nm_txsync = igb_netmap_txsync;
na.nm_rxsync = igb_netmap_rxsync;
na.nm_lock = igb_netmap_lock_wrapper;
na.nm_register = igb_netmap_reg;
netmap_attach(&na, adapter->num_queues);
}
/* end of file */