freebsd-nq/module/zfs/dsl_pool.c

1062 lines
30 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2013 by Delphix. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#include <sys/dsl_pool.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_prop.h>
2008-11-20 20:01:55 +00:00
#include <sys/dsl_dir.h>
#include <sys/dsl_synctask.h>
#include <sys/dsl_scan.h>
#include <sys/dnode.h>
2008-11-20 20:01:55 +00:00
#include <sys/dmu_tx.h>
#include <sys/dmu_objset.h>
#include <sys/arc.h>
#include <sys/zap.h>
#include <sys/zio.h>
#include <sys/zfs_context.h>
#include <sys/fs/zfs.h>
#include <sys/zfs_znode.h>
#include <sys/spa_impl.h>
#include <sys/dsl_deadlist.h>
#include <sys/bptree.h>
#include <sys/zfeature.h>
#include <sys/zil_impl.h>
#include <sys/dsl_userhold.h>
2008-11-20 20:01:55 +00:00
int zfs_no_write_throttle = 0;
int zfs_write_limit_shift = 3; /* 1/8th of physical memory */
int zfs_txg_synctime_ms = 1000; /* target millisecs to sync a txg */
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
unsigned long zfs_write_limit_min = 32 << 20; /* min write limit is 32MB */
unsigned long zfs_write_limit_max = 0; /* max data payload per txg */
unsigned long zfs_write_limit_inflated = 0;
unsigned long zfs_write_limit_override = 0;
2008-11-20 20:01:55 +00:00
kmutex_t zfs_write_limit_lock;
static pgcnt_t old_physmem = 0;
hrtime_t zfs_throttle_delay = MSEC2NSEC(10);
hrtime_t zfs_throttle_resolution = MSEC2NSEC(10);
int
dsl_pool_open_special_dir(dsl_pool_t *dp, const char *name, dsl_dir_t **ddp)
2008-11-20 20:01:55 +00:00
{
uint64_t obj;
int err;
err = zap_lookup(dp->dp_meta_objset,
dp->dp_root_dir->dd_phys->dd_child_dir_zapobj,
name, sizeof (obj), 1, &obj);
2008-11-20 20:01:55 +00:00
if (err)
return (err);
return (dsl_dir_hold_obj(dp, obj, name, dp, ddp));
2008-11-20 20:01:55 +00:00
}
static dsl_pool_t *
dsl_pool_open_impl(spa_t *spa, uint64_t txg)
{
dsl_pool_t *dp;
blkptr_t *bp = spa_get_rootblkptr(spa);
dp = kmem_zalloc(sizeof (dsl_pool_t), KM_SLEEP);
dp->dp_spa = spa;
dp->dp_meta_rootbp = *bp;
rrw_init(&dp->dp_config_rwlock, B_TRUE);
2008-11-20 20:01:55 +00:00
dp->dp_write_limit = zfs_write_limit_min;
txg_init(dp, txg);
txg_list_create(&dp->dp_dirty_datasets,
offsetof(dsl_dataset_t, ds_dirty_link));
txg_list_create(&dp->dp_dirty_zilogs,
offsetof(zilog_t, zl_dirty_link));
2008-11-20 20:01:55 +00:00
txg_list_create(&dp->dp_dirty_dirs,
offsetof(dsl_dir_t, dd_dirty_link));
txg_list_create(&dp->dp_sync_tasks,
offsetof(dsl_sync_task_t, dst_node));
2008-11-20 20:01:55 +00:00
mutex_init(&dp->dp_lock, NULL, MUTEX_DEFAULT, NULL);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
dp->dp_iput_taskq = taskq_create("zfs_iput_taskq", 1, minclsyspri,
2009-07-02 22:44:48 +00:00
1, 4, 0);
2008-11-20 20:01:55 +00:00
return (dp);
}
int
dsl_pool_init(spa_t *spa, uint64_t txg, dsl_pool_t **dpp)
2008-11-20 20:01:55 +00:00
{
int err;
dsl_pool_t *dp = dsl_pool_open_impl(spa, txg);
err = dmu_objset_open_impl(spa, NULL, &dp->dp_meta_rootbp,
&dp->dp_meta_objset);
if (err != 0)
dsl_pool_close(dp);
else
*dpp = dp;
return (err);
}
int
dsl_pool_open(dsl_pool_t *dp)
{
int err;
dsl_dir_t *dd;
dsl_dataset_t *ds;
uint64_t obj;
2008-11-20 20:01:55 +00:00
rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG);
2008-11-20 20:01:55 +00:00
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_ROOT_DATASET, sizeof (uint64_t), 1,
&dp->dp_root_dir_obj);
if (err)
goto out;
err = dsl_dir_hold_obj(dp, dp->dp_root_dir_obj,
2008-11-20 20:01:55 +00:00
NULL, dp, &dp->dp_root_dir);
if (err)
goto out;
err = dsl_pool_open_special_dir(dp, MOS_DIR_NAME, &dp->dp_mos_dir);
2008-11-20 20:01:55 +00:00
if (err)
goto out;
if (spa_version(dp->dp_spa) >= SPA_VERSION_ORIGIN) {
err = dsl_pool_open_special_dir(dp, ORIGIN_DIR_NAME, &dd);
if (err)
goto out;
err = dsl_dataset_hold_obj(dp, dd->dd_phys->dd_head_dataset_obj,
FTAG, &ds);
2009-07-02 22:44:48 +00:00
if (err == 0) {
err = dsl_dataset_hold_obj(dp,
ds->ds_phys->ds_prev_snap_obj, dp,
&dp->dp_origin_snap);
dsl_dataset_rele(ds, FTAG);
}
dsl_dir_rele(dd, dp);
if (err)
goto out;
}
if (spa_version(dp->dp_spa) >= SPA_VERSION_DEADLISTS) {
err = dsl_pool_open_special_dir(dp, FREE_DIR_NAME,
&dp->dp_free_dir);
if (err)
goto out;
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_FREE_BPOBJ, sizeof (uint64_t), 1, &obj);
if (err)
goto out;
VERIFY0(bpobj_open(&dp->dp_free_bpobj,
dp->dp_meta_objset, obj));
}
if (spa_feature_is_active(dp->dp_spa,
&spa_feature_table[SPA_FEATURE_ASYNC_DESTROY])) {
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_BPTREE_OBJ, sizeof (uint64_t), 1,
&dp->dp_bptree_obj);
if (err != 0)
goto out;
}
if (spa_feature_is_active(dp->dp_spa,
&spa_feature_table[SPA_FEATURE_EMPTY_BPOBJ])) {
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_EMPTY_BPOBJ, sizeof (uint64_t), 1,
&dp->dp_empty_bpobj);
if (err != 0)
goto out;
}
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_TMP_USERREFS, sizeof (uint64_t), 1,
&dp->dp_tmp_userrefs_obj);
if (err == ENOENT)
err = 0;
if (err)
goto out;
err = dsl_scan_init(dp, dp->dp_tx.tx_open_txg);
2008-11-20 20:01:55 +00:00
out:
rrw_exit(&dp->dp_config_rwlock, FTAG);
2008-11-20 20:01:55 +00:00
return (err);
}
void
dsl_pool_close(dsl_pool_t *dp)
{
/* drop our references from dsl_pool_open() */
/*
* Since we held the origin_snap from "syncing" context (which
* includes pool-opening context), it actually only got a "ref"
* and not a hold, so just drop that here.
*/
if (dp->dp_origin_snap)
dsl_dataset_rele(dp->dp_origin_snap, dp);
2008-11-20 20:01:55 +00:00
if (dp->dp_mos_dir)
dsl_dir_rele(dp->dp_mos_dir, dp);
if (dp->dp_free_dir)
dsl_dir_rele(dp->dp_free_dir, dp);
2008-11-20 20:01:55 +00:00
if (dp->dp_root_dir)
dsl_dir_rele(dp->dp_root_dir, dp);
2008-11-20 20:01:55 +00:00
bpobj_close(&dp->dp_free_bpobj);
2008-11-20 20:01:55 +00:00
/* undo the dmu_objset_open_impl(mos) from dsl_pool_open() */
if (dp->dp_meta_objset)
dmu_objset_evict(dp->dp_meta_objset);
2008-11-20 20:01:55 +00:00
txg_list_destroy(&dp->dp_dirty_datasets);
txg_list_destroy(&dp->dp_dirty_zilogs);
txg_list_destroy(&dp->dp_sync_tasks);
2008-11-20 20:01:55 +00:00
txg_list_destroy(&dp->dp_dirty_dirs);
arc_flush(dp->dp_spa);
txg_fini(dp);
dsl_scan_fini(dp);
rrw_destroy(&dp->dp_config_rwlock);
2008-11-20 20:01:55 +00:00
mutex_destroy(&dp->dp_lock);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
taskq_destroy(dp->dp_iput_taskq);
if (dp->dp_blkstats)
kmem_free(dp->dp_blkstats, sizeof (zfs_all_blkstats_t));
2008-11-20 20:01:55 +00:00
kmem_free(dp, sizeof (dsl_pool_t));
}
dsl_pool_t *
dsl_pool_create(spa_t *spa, nvlist_t *zplprops, uint64_t txg)
2008-11-20 20:01:55 +00:00
{
int err;
dsl_pool_t *dp = dsl_pool_open_impl(spa, txg);
dmu_tx_t *tx = dmu_tx_create_assigned(dp, txg);
objset_t *os;
dsl_dataset_t *ds;
uint64_t obj;
rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG);
/* create and open the MOS (meta-objset) */
dp->dp_meta_objset = dmu_objset_create_impl(spa,
NULL, &dp->dp_meta_rootbp, DMU_OST_META, tx);
2008-11-20 20:01:55 +00:00
/* create the pool directory */
err = zap_create_claim(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_OT_OBJECT_DIRECTORY, DMU_OT_NONE, 0, tx);
ASSERT0(err);
2008-11-20 20:01:55 +00:00
/* Initialize scan structures */
VERIFY0(dsl_scan_init(dp, txg));
2008-11-20 20:01:55 +00:00
/* create and open the root dir */
dp->dp_root_dir_obj = dsl_dir_create_sync(dp, NULL, NULL, tx);
VERIFY0(dsl_dir_hold_obj(dp, dp->dp_root_dir_obj,
2008-11-20 20:01:55 +00:00
NULL, dp, &dp->dp_root_dir));
/* create and open the meta-objset dir */
(void) dsl_dir_create_sync(dp, dp->dp_root_dir, MOS_DIR_NAME, tx);
VERIFY0(dsl_pool_open_special_dir(dp,
MOS_DIR_NAME, &dp->dp_mos_dir));
if (spa_version(spa) >= SPA_VERSION_DEADLISTS) {
/* create and open the free dir */
(void) dsl_dir_create_sync(dp, dp->dp_root_dir,
FREE_DIR_NAME, tx);
VERIFY0(dsl_pool_open_special_dir(dp,
FREE_DIR_NAME, &dp->dp_free_dir));
/* create and open the free_bplist */
obj = bpobj_alloc(dp->dp_meta_objset, SPA_MAXBLOCKSIZE, tx);
VERIFY(zap_add(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_FREE_BPOBJ, sizeof (uint64_t), 1, &obj, tx) == 0);
VERIFY0(bpobj_open(&dp->dp_free_bpobj,
dp->dp_meta_objset, obj));
}
if (spa_version(spa) >= SPA_VERSION_DSL_SCRUB)
dsl_pool_create_origin(dp, tx);
/* create the root dataset */
obj = dsl_dataset_create_sync_dd(dp->dp_root_dir, NULL, 0, tx);
/* create the root objset */
VERIFY0(dsl_dataset_hold_obj(dp, obj, FTAG, &ds));
VERIFY(NULL != (os = dmu_objset_create_impl(dp->dp_spa, ds,
dsl_dataset_get_blkptr(ds), DMU_OST_ZFS, tx)));
#ifdef _KERNEL
zfs_create_fs(os, kcred, zplprops, tx);
#endif
dsl_dataset_rele(ds, FTAG);
2008-11-20 20:01:55 +00:00
dmu_tx_commit(tx);
rrw_exit(&dp->dp_config_rwlock, FTAG);
2008-11-20 20:01:55 +00:00
return (dp);
}
/*
* Account for the meta-objset space in its placeholder dsl_dir.
*/
void
dsl_pool_mos_diduse_space(dsl_pool_t *dp,
int64_t used, int64_t comp, int64_t uncomp)
{
ASSERT3U(comp, ==, uncomp); /* it's all metadata */
mutex_enter(&dp->dp_lock);
dp->dp_mos_used_delta += used;
dp->dp_mos_compressed_delta += comp;
dp->dp_mos_uncompressed_delta += uncomp;
mutex_exit(&dp->dp_lock);
}
static int
deadlist_enqueue_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
dsl_deadlist_t *dl = arg;
dsl_deadlist_insert(dl, bp, tx);
return (0);
}
2008-11-20 20:01:55 +00:00
void
dsl_pool_sync(dsl_pool_t *dp, uint64_t txg)
{
zio_t *zio;
dmu_tx_t *tx;
dsl_dir_t *dd;
dsl_dataset_t *ds;
objset_t *mos = dp->dp_meta_objset;
hrtime_t start, write_time;
uint64_t data_written;
2008-11-20 20:01:55 +00:00
int err;
list_t synced_datasets;
list_create(&synced_datasets, sizeof (dsl_dataset_t),
offsetof(dsl_dataset_t, ds_synced_link));
2008-11-20 20:01:55 +00:00
/*
* We need to copy dp_space_towrite() before doing
* dsl_sync_task_sync(), because
* dsl_dataset_snapshot_reserve_space() will increase
* dp_space_towrite but not actually write anything.
*/
data_written = dp->dp_space_towrite[txg & TXG_MASK];
2008-11-20 20:01:55 +00:00
tx = dmu_tx_create_assigned(dp, txg);
dp->dp_read_overhead = 0;
2009-07-02 22:44:48 +00:00
start = gethrtime();
2008-11-20 20:01:55 +00:00
zio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED);
while ((ds = txg_list_remove(&dp->dp_dirty_datasets, txg))) {
2009-07-02 22:44:48 +00:00
/*
* We must not sync any non-MOS datasets twice, because
* we may have taken a snapshot of them. However, we
* may sync newly-created datasets on pass 2.
*/
ASSERT(!list_link_active(&ds->ds_synced_link));
list_insert_tail(&synced_datasets, ds);
2008-11-20 20:01:55 +00:00
dsl_dataset_sync(ds, zio, tx);
}
DTRACE_PROBE(pool_sync__1setup);
2008-11-20 20:01:55 +00:00
err = zio_wait(zio);
2009-07-02 22:44:48 +00:00
write_time = gethrtime() - start;
2008-11-20 20:01:55 +00:00
ASSERT(err == 0);
DTRACE_PROBE(pool_sync__2rootzio);
2008-11-20 20:01:55 +00:00
/*
* After the data blocks have been written (ensured by the zio_wait()
* above), update the user/group space accounting.
*/
for (ds = list_head(&synced_datasets); ds;
ds = list_next(&synced_datasets, ds))
dmu_objset_do_userquota_updates(ds->ds_objset, tx);
2009-07-02 22:44:48 +00:00
/*
* Sync the datasets again to push out the changes due to
* userspace updates. This must be done before we process the
* sync tasks, so that any snapshots will have the correct
* user accounting information (and we won't get confused
* about which blocks are part of the snapshot).
2009-07-02 22:44:48 +00:00
*/
zio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED);
while ((ds = txg_list_remove(&dp->dp_dirty_datasets, txg))) {
2009-07-02 22:44:48 +00:00
ASSERT(list_link_active(&ds->ds_synced_link));
dmu_buf_rele(ds->ds_dbuf, ds);
dsl_dataset_sync(ds, zio, tx);
}
err = zio_wait(zio);
/*
* Now that the datasets have been completely synced, we can
* clean up our in-memory structures accumulated while syncing:
*
* - move dead blocks from the pending deadlist to the on-disk deadlist
* - clean up zil records
* - release hold from dsl_dataset_dirty()
*/
while ((ds = list_remove_head(&synced_datasets))) {
ASSERTV(objset_t *os = ds->ds_objset);
bplist_iterate(&ds->ds_pending_deadlist,
deadlist_enqueue_cb, &ds->ds_deadlist, tx);
ASSERT(!dmu_objset_is_dirty(os, txg));
dmu_buf_rele(ds->ds_dbuf, ds);
}
start = gethrtime();
while ((dd = txg_list_remove(&dp->dp_dirty_dirs, txg)))
2008-11-20 20:01:55 +00:00
dsl_dir_sync(dd, tx);
write_time += gethrtime() - start;
/*
* The MOS's space is accounted for in the pool/$MOS
* (dp_mos_dir). We can't modify the mos while we're syncing
* it, so we remember the deltas and apply them here.
*/
if (dp->dp_mos_used_delta != 0 || dp->dp_mos_compressed_delta != 0 ||
dp->dp_mos_uncompressed_delta != 0) {
dsl_dir_diduse_space(dp->dp_mos_dir, DD_USED_HEAD,
dp->dp_mos_used_delta,
dp->dp_mos_compressed_delta,
dp->dp_mos_uncompressed_delta, tx);
dp->dp_mos_used_delta = 0;
dp->dp_mos_compressed_delta = 0;
dp->dp_mos_uncompressed_delta = 0;
}
start = gethrtime();
if (list_head(&mos->os_dirty_dnodes[txg & TXG_MASK]) != NULL ||
list_head(&mos->os_free_dnodes[txg & TXG_MASK]) != NULL) {
2008-11-20 20:01:55 +00:00
zio = zio_root(dp->dp_spa, NULL, NULL, ZIO_FLAG_MUSTSUCCEED);
dmu_objset_sync(mos, zio, tx);
2008-11-20 20:01:55 +00:00
err = zio_wait(zio);
ASSERT(err == 0);
dprintf_bp(&dp->dp_meta_rootbp, "meta objset rootbp is %s", "");
spa_set_rootblkptr(dp->dp_spa, &dp->dp_meta_rootbp);
}
write_time += gethrtime() - start;
DTRACE_PROBE2(pool_sync__4io, hrtime_t, write_time,
hrtime_t, dp->dp_read_overhead);
write_time -= dp->dp_read_overhead;
2008-11-20 20:01:55 +00:00
/*
* If we modify a dataset in the same txg that we want to destroy it,
* its dsl_dir's dd_dbuf will be dirty, and thus have a hold on it.
* dsl_dir_destroy_check() will fail if there are unexpected holds.
* Therefore, we want to sync the MOS (thus syncing the dd_dbuf
* and clearing the hold on it) before we process the sync_tasks.
* The MOS data dirtied by the sync_tasks will be synced on the next
* pass.
*/
DTRACE_PROBE(pool_sync__3task);
if (!txg_list_empty(&dp->dp_sync_tasks, txg)) {
dsl_sync_task_t *dst;
/*
* No more sync tasks should have been added while we
* were syncing.
*/
ASSERT(spa_sync_pass(dp->dp_spa) == 1);
while ((dst = txg_list_remove(&dp->dp_sync_tasks, txg)))
dsl_sync_task_sync(dst, tx);
}
2008-11-20 20:01:55 +00:00
dmu_tx_commit(tx);
dp->dp_space_towrite[txg & TXG_MASK] = 0;
ASSERT(dp->dp_tempreserved[txg & TXG_MASK] == 0);
/*
* If the write limit max has not been explicitly set, set it
* to a fraction of available physical memory (default 1/8th).
* Note that we must inflate the limit because the spa
* inflates write sizes to account for data replication.
* Check this each sync phase to catch changing memory size.
*/
if (physmem != old_physmem && zfs_write_limit_shift) {
mutex_enter(&zfs_write_limit_lock);
old_physmem = physmem;
zfs_write_limit_max = ptob(physmem) >> zfs_write_limit_shift;
zfs_write_limit_inflated = MAX(zfs_write_limit_min,
spa_get_asize(dp->dp_spa, zfs_write_limit_max));
mutex_exit(&zfs_write_limit_lock);
}
/*
* Attempt to keep the sync time consistent by adjusting the
* amount of write traffic allowed into each transaction group.
* Weight the throughput calculation towards the current value:
* thru = 3/4 old_thru + 1/4 new_thru
*
* Note: write_time is in nanosecs while dp_throughput is expressed in
* bytes per millisecond.
*/
ASSERT(zfs_write_limit_min > 0);
if (data_written > zfs_write_limit_min / 8 &&
write_time > MSEC2NSEC(1)) {
uint64_t throughput = data_written / NSEC2MSEC(write_time);
if (dp->dp_throughput)
dp->dp_throughput = throughput / 4 +
3 * dp->dp_throughput / 4;
else
dp->dp_throughput = throughput;
dp->dp_write_limit = MIN(zfs_write_limit_inflated,
MAX(zfs_write_limit_min,
dp->dp_throughput * zfs_txg_synctime_ms));
}
2008-11-20 20:01:55 +00:00
}
void
dsl_pool_sync_done(dsl_pool_t *dp, uint64_t txg)
2008-11-20 20:01:55 +00:00
{
zilog_t *zilog;
2008-11-20 20:01:55 +00:00
dsl_dataset_t *ds;
while ((zilog = txg_list_remove(&dp->dp_dirty_zilogs, txg))) {
ds = dmu_objset_ds(zilog->zl_os);
zil_clean(zilog, txg);
ASSERT(!dmu_objset_is_dirty(zilog->zl_os, txg));
dmu_buf_rele(ds->ds_dbuf, zilog);
2008-11-20 20:01:55 +00:00
}
ASSERT(!dmu_objset_is_dirty(dp->dp_meta_objset, txg));
2008-11-20 20:01:55 +00:00
}
/*
* TRUE if the current thread is the tx_sync_thread or if we
* are being called from SPA context during pool initialization.
*/
int
dsl_pool_sync_context(dsl_pool_t *dp)
{
return (curthread == dp->dp_tx.tx_sync_thread ||
spa_is_initializing(dp->dp_spa));
2008-11-20 20:01:55 +00:00
}
uint64_t
dsl_pool_adjustedsize(dsl_pool_t *dp, boolean_t netfree)
{
uint64_t space, resv;
/*
* Reserve about 1.6% (1/64), or at least 32MB, for allocation
* efficiency.
* XXX The intent log is not accounted for, so it must fit
* within this slop.
*
* If we're trying to assess whether it's OK to do a free,
* cut the reservation in half to allow forward progress
* (e.g. make it possible to rm(1) files from a full pool).
*/
space = spa_get_dspace(dp->dp_spa);
resv = MAX(space >> 6, SPA_MINDEVSIZE >> 1);
if (netfree)
resv >>= 1;
return (space - resv);
}
int
dsl_pool_tempreserve_space(dsl_pool_t *dp, uint64_t space, dmu_tx_t *tx)
{
uint64_t reserved = 0;
uint64_t write_limit = (zfs_write_limit_override ?
zfs_write_limit_override : dp->dp_write_limit);
if (zfs_no_write_throttle) {
atomic_add_64(&dp->dp_tempreserved[tx->tx_txg & TXG_MASK],
space);
2008-11-20 20:01:55 +00:00
return (0);
}
/*
* Check to see if we have exceeded the maximum allowed IO for
* this transaction group. We can do this without locks since
* a little slop here is ok. Note that we do the reserved check
* with only half the requested reserve: this is because the
* reserve requests are worst-case, and we really don't want to
* throttle based off of worst-case estimates.
*/
if (write_limit > 0) {
reserved = dp->dp_space_towrite[tx->tx_txg & TXG_MASK]
+ dp->dp_tempreserved[tx->tx_txg & TXG_MASK] / 2;
if (reserved && reserved > write_limit) {
DMU_TX_STAT_BUMP(dmu_tx_write_limit);
return (SET_ERROR(ERESTART));
}
2008-11-20 20:01:55 +00:00
}
atomic_add_64(&dp->dp_tempreserved[tx->tx_txg & TXG_MASK], space);
/*
* If this transaction group is over 7/8ths capacity, delay
* the caller 1 clock tick. This will slow down the "fill"
* rate until the sync process can catch up with us.
*/
if (reserved && reserved > (write_limit - (write_limit >> 3))) {
txg_delay(dp, tx->tx_txg, zfs_throttle_delay,
zfs_throttle_resolution);
}
2008-11-20 20:01:55 +00:00
return (0);
}
void
dsl_pool_tempreserve_clear(dsl_pool_t *dp, int64_t space, dmu_tx_t *tx)
{
ASSERT(dp->dp_tempreserved[tx->tx_txg & TXG_MASK] >= space);
atomic_add_64(&dp->dp_tempreserved[tx->tx_txg & TXG_MASK], -space);
}
void
dsl_pool_memory_pressure(dsl_pool_t *dp)
{
uint64_t space_inuse = 0;
int i;
if (dp->dp_write_limit == zfs_write_limit_min)
return;
for (i = 0; i < TXG_SIZE; i++) {
space_inuse += dp->dp_space_towrite[i];
space_inuse += dp->dp_tempreserved[i];
}
dp->dp_write_limit = MAX(zfs_write_limit_min,
MIN(dp->dp_write_limit, space_inuse / 4));
}
void
dsl_pool_willuse_space(dsl_pool_t *dp, int64_t space, dmu_tx_t *tx)
{
if (space > 0) {
mutex_enter(&dp->dp_lock);
dp->dp_space_towrite[tx->tx_txg & TXG_MASK] += space;
mutex_exit(&dp->dp_lock);
}
}
/* ARGSUSED */
static int
upgrade_clones_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg)
{
dmu_tx_t *tx = arg;
dsl_dataset_t *ds, *prev = NULL;
int err;
err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds);
if (err)
return (err);
while (ds->ds_phys->ds_prev_snap_obj != 0) {
err = dsl_dataset_hold_obj(dp, ds->ds_phys->ds_prev_snap_obj,
FTAG, &prev);
if (err) {
dsl_dataset_rele(ds, FTAG);
return (err);
}
if (prev->ds_phys->ds_next_snap_obj != ds->ds_object)
break;
dsl_dataset_rele(ds, FTAG);
ds = prev;
prev = NULL;
}
if (prev == NULL) {
prev = dp->dp_origin_snap;
/*
* The $ORIGIN can't have any data, or the accounting
* will be wrong.
*/
ASSERT0(prev->ds_phys->ds_bp.blk_birth);
/* The origin doesn't get attached to itself */
if (ds->ds_object == prev->ds_object) {
dsl_dataset_rele(ds, FTAG);
return (0);
}
dmu_buf_will_dirty(ds->ds_dbuf, tx);
ds->ds_phys->ds_prev_snap_obj = prev->ds_object;
ds->ds_phys->ds_prev_snap_txg = prev->ds_phys->ds_creation_txg;
dmu_buf_will_dirty(ds->ds_dir->dd_dbuf, tx);
ds->ds_dir->dd_phys->dd_origin_obj = prev->ds_object;
dmu_buf_will_dirty(prev->ds_dbuf, tx);
prev->ds_phys->ds_num_children++;
if (ds->ds_phys->ds_next_snap_obj == 0) {
ASSERT(ds->ds_prev == NULL);
VERIFY0(dsl_dataset_hold_obj(dp,
ds->ds_phys->ds_prev_snap_obj, ds, &ds->ds_prev));
}
}
ASSERT3U(ds->ds_dir->dd_phys->dd_origin_obj, ==, prev->ds_object);
ASSERT3U(ds->ds_phys->ds_prev_snap_obj, ==, prev->ds_object);
if (prev->ds_phys->ds_next_clones_obj == 0) {
dmu_buf_will_dirty(prev->ds_dbuf, tx);
prev->ds_phys->ds_next_clones_obj =
zap_create(dp->dp_meta_objset,
DMU_OT_NEXT_CLONES, DMU_OT_NONE, 0, tx);
}
VERIFY0(zap_add_int(dp->dp_meta_objset,
prev->ds_phys->ds_next_clones_obj, ds->ds_object, tx));
dsl_dataset_rele(ds, FTAG);
if (prev != dp->dp_origin_snap)
dsl_dataset_rele(prev, FTAG);
return (0);
}
void
dsl_pool_upgrade_clones(dsl_pool_t *dp, dmu_tx_t *tx)
{
ASSERT(dmu_tx_is_syncing(tx));
ASSERT(dp->dp_origin_snap != NULL);
VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj, upgrade_clones_cb,
tx, DS_FIND_CHILDREN));
}
/* ARGSUSED */
static int
upgrade_dir_clones_cb(dsl_pool_t *dp, dsl_dataset_t *ds, void *arg)
{
dmu_tx_t *tx = arg;
objset_t *mos = dp->dp_meta_objset;
if (ds->ds_dir->dd_phys->dd_origin_obj != 0) {
dsl_dataset_t *origin;
VERIFY0(dsl_dataset_hold_obj(dp,
ds->ds_dir->dd_phys->dd_origin_obj, FTAG, &origin));
if (origin->ds_dir->dd_phys->dd_clones == 0) {
dmu_buf_will_dirty(origin->ds_dir->dd_dbuf, tx);
origin->ds_dir->dd_phys->dd_clones = zap_create(mos,
DMU_OT_DSL_CLONES, DMU_OT_NONE, 0, tx);
}
VERIFY0(zap_add_int(dp->dp_meta_objset,
origin->ds_dir->dd_phys->dd_clones, ds->ds_object, tx));
dsl_dataset_rele(origin, FTAG);
}
return (0);
}
void
dsl_pool_upgrade_dir_clones(dsl_pool_t *dp, dmu_tx_t *tx)
{
uint64_t obj;
ASSERT(dmu_tx_is_syncing(tx));
(void) dsl_dir_create_sync(dp, dp->dp_root_dir, FREE_DIR_NAME, tx);
VERIFY0(dsl_pool_open_special_dir(dp,
FREE_DIR_NAME, &dp->dp_free_dir));
/*
* We can't use bpobj_alloc(), because spa_version() still
* returns the old version, and we need a new-version bpobj with
* subobj support. So call dmu_object_alloc() directly.
*/
obj = dmu_object_alloc(dp->dp_meta_objset, DMU_OT_BPOBJ,
SPA_MAXBLOCKSIZE, DMU_OT_BPOBJ_HDR, sizeof (bpobj_phys_t), tx);
VERIFY0(zap_add(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_FREE_BPOBJ, sizeof (uint64_t), 1, &obj, tx));
VERIFY0(bpobj_open(&dp->dp_free_bpobj, dp->dp_meta_objset, obj));
VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
upgrade_dir_clones_cb, tx, DS_FIND_CHILDREN));
}
void
dsl_pool_create_origin(dsl_pool_t *dp, dmu_tx_t *tx)
{
uint64_t dsobj;
dsl_dataset_t *ds;
ASSERT(dmu_tx_is_syncing(tx));
ASSERT(dp->dp_origin_snap == NULL);
ASSERT(rrw_held(&dp->dp_config_rwlock, RW_WRITER));
/* create the origin dir, ds, & snap-ds */
dsobj = dsl_dataset_create_sync(dp->dp_root_dir, ORIGIN_DIR_NAME,
NULL, 0, kcred, tx);
VERIFY0(dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds));
dsl_dataset_snapshot_sync_impl(ds, ORIGIN_DIR_NAME, tx);
VERIFY0(dsl_dataset_hold_obj(dp, ds->ds_phys->ds_prev_snap_obj,
dp, &dp->dp_origin_snap));
dsl_dataset_rele(ds, FTAG);
}
2009-07-02 22:44:48 +00:00
taskq_t *
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
dsl_pool_iput_taskq(dsl_pool_t *dp)
2009-07-02 22:44:48 +00:00
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
return (dp->dp_iput_taskq);
2009-07-02 22:44:48 +00:00
}
/*
* Walk through the pool-wide zap object of temporary snapshot user holds
* and release them.
*/
void
dsl_pool_clean_tmp_userrefs(dsl_pool_t *dp)
{
zap_attribute_t za;
zap_cursor_t zc;
objset_t *mos = dp->dp_meta_objset;
uint64_t zapobj = dp->dp_tmp_userrefs_obj;
if (zapobj == 0)
return;
ASSERT(spa_version(dp->dp_spa) >= SPA_VERSION_USERREFS);
for (zap_cursor_init(&zc, mos, zapobj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
char *htag;
uint64_t dsobj;
htag = strchr(za.za_name, '-');
*htag = '\0';
++htag;
dsobj = strtonum(za.za_name, NULL);
dsl_dataset_user_release_tmp(dp, dsobj, htag);
}
zap_cursor_fini(&zc);
}
/*
* Create the pool-wide zap object for storing temporary snapshot holds.
*/
void
dsl_pool_user_hold_create_obj(dsl_pool_t *dp, dmu_tx_t *tx)
{
objset_t *mos = dp->dp_meta_objset;
ASSERT(dp->dp_tmp_userrefs_obj == 0);
ASSERT(dmu_tx_is_syncing(tx));
dp->dp_tmp_userrefs_obj = zap_create_link(mos, DMU_OT_USERREFS,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_TMP_USERREFS, tx);
}
static int
dsl_pool_user_hold_rele_impl(dsl_pool_t *dp, uint64_t dsobj,
const char *tag, uint64_t now, dmu_tx_t *tx, boolean_t holding)
{
objset_t *mos = dp->dp_meta_objset;
uint64_t zapobj = dp->dp_tmp_userrefs_obj;
char *name;
int error;
ASSERT(spa_version(dp->dp_spa) >= SPA_VERSION_USERREFS);
ASSERT(dmu_tx_is_syncing(tx));
/*
* If the pool was created prior to SPA_VERSION_USERREFS, the
* zap object for temporary holds might not exist yet.
*/
if (zapobj == 0) {
if (holding) {
dsl_pool_user_hold_create_obj(dp, tx);
zapobj = dp->dp_tmp_userrefs_obj;
} else {
return (SET_ERROR(ENOENT));
}
}
name = kmem_asprintf("%llx-%s", (u_longlong_t)dsobj, tag);
if (holding)
error = zap_add(mos, zapobj, name, 8, 1, &now, tx);
else
error = zap_remove(mos, zapobj, name, tx);
strfree(name);
return (error);
}
/*
* Add a temporary hold for the given dataset object and tag.
*/
int
dsl_pool_user_hold(dsl_pool_t *dp, uint64_t dsobj, const char *tag,
uint64_t now, dmu_tx_t *tx)
{
return (dsl_pool_user_hold_rele_impl(dp, dsobj, tag, now, tx, B_TRUE));
}
/*
* Release a temporary hold for the given dataset object and tag.
*/
int
dsl_pool_user_release(dsl_pool_t *dp, uint64_t dsobj, const char *tag,
dmu_tx_t *tx)
{
return (dsl_pool_user_hold_rele_impl(dp, dsobj, tag, 0,
tx, B_FALSE));
}
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
/*
* DSL Pool Configuration Lock
*
* The dp_config_rwlock protects against changes to DSL state (e.g. dataset
* creation / destruction / rename / property setting). It must be held for
* read to hold a dataset or dsl_dir. I.e. you must call
* dsl_pool_config_enter() or dsl_pool_hold() before calling
* dsl_{dataset,dir}_hold{_obj}. In most circumstances, the dp_config_rwlock
* must be held continuously until all datasets and dsl_dirs are released.
*
* The only exception to this rule is that if a "long hold" is placed on
* a dataset, then the dp_config_rwlock may be dropped while the dataset
* is still held. The long hold will prevent the dataset from being
* destroyed -- the destroy will fail with EBUSY. A long hold can be
* obtained by calling dsl_dataset_long_hold(), or by "owning" a dataset
* (by calling dsl_{dataset,objset}_{try}own{_obj}).
*
* Legitimate long-holders (including owners) should be long-running, cancelable
* tasks that should cause "zfs destroy" to fail. This includes DMU
* consumers (i.e. a ZPL filesystem being mounted or ZVOL being open),
* "zfs send", and "zfs diff". There are several other long-holders whose
* uses are suboptimal (e.g. "zfs promote", and zil_suspend()).
*
* The usual formula for long-holding would be:
* dsl_pool_hold()
* dsl_dataset_hold()
* ... perform checks ...
* dsl_dataset_long_hold()
* dsl_pool_rele()
* ... perform long-running task ...
* dsl_dataset_long_rele()
* dsl_dataset_rele()
*
* Note that when the long hold is released, the dataset is still held but
* the pool is not held. The dataset may change arbitrarily during this time
* (e.g. it could be destroyed). Therefore you shouldn't do anything to the
* dataset except release it.
*
* User-initiated operations (e.g. ioctls, zfs_ioc_*()) are either read-only
* or modifying operations.
*
* Modifying operations should generally use dsl_sync_task(). The synctask
* infrastructure enforces proper locking strategy with respect to the
* dp_config_rwlock. See the comment above dsl_sync_task() for details.
*
* Read-only operations will manually hold the pool, then the dataset, obtain
* information from the dataset, then release the pool and dataset.
* dmu_objset_{hold,rele}() are convenience routines that also do the pool
* hold/rele.
*/
int
dsl_pool_hold(const char *name, void *tag, dsl_pool_t **dp)
{
spa_t *spa;
int error;
error = spa_open(name, &spa, tag);
if (error == 0) {
*dp = spa_get_dsl(spa);
dsl_pool_config_enter(*dp, tag);
}
return (error);
}
void
dsl_pool_rele(dsl_pool_t *dp, void *tag)
{
dsl_pool_config_exit(dp, tag);
spa_close(dp->dp_spa, tag);
}
void
dsl_pool_config_enter(dsl_pool_t *dp, void *tag)
{
/*
* We use a "reentrant" reader-writer lock, but not reentrantly.
*
* The rrwlock can (with the track_all flag) track all reading threads,
* which is very useful for debugging which code path failed to release
* the lock, and for verifying that the *current* thread does hold
* the lock.
*
* (Unlike a rwlock, which knows that N threads hold it for
* read, but not *which* threads, so rw_held(RW_READER) returns TRUE
* if any thread holds it for read, even if this thread doesn't).
*/
ASSERT(!rrw_held(&dp->dp_config_rwlock, RW_READER));
rrw_enter(&dp->dp_config_rwlock, RW_READER, tag);
}
void
dsl_pool_config_exit(dsl_pool_t *dp, void *tag)
{
rrw_exit(&dp->dp_config_rwlock, tag);
}
boolean_t
dsl_pool_config_held(dsl_pool_t *dp)
{
return (RRW_LOCK_HELD(&dp->dp_config_rwlock));
}
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(dsl_pool_config_enter);
EXPORT_SYMBOL(dsl_pool_config_exit);
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_no_write_throttle, int, 0644);
MODULE_PARM_DESC(zfs_no_write_throttle, "Disable write throttling");
module_param(zfs_write_limit_shift, int, 0444);
MODULE_PARM_DESC(zfs_write_limit_shift, "log2(fraction of memory) per txg");
module_param(zfs_txg_synctime_ms, int, 0644);
MODULE_PARM_DESC(zfs_txg_synctime_ms, "Target milliseconds between txg sync");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_write_limit_min, ulong, 0444);
MODULE_PARM_DESC(zfs_write_limit_min, "Min txg write limit");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_write_limit_max, ulong, 0444);
MODULE_PARM_DESC(zfs_write_limit_max, "Max txg write limit");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_write_limit_inflated, ulong, 0444);
MODULE_PARM_DESC(zfs_write_limit_inflated, "Inflated txg write limit");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
module_param(zfs_write_limit_override, ulong, 0444);
MODULE_PARM_DESC(zfs_write_limit_override, "Override txg write limit");
Add missing ZFS tunables This commit adds module options for all existing zfs tunables. Ideally the average user should never need to modify any of these values. However, in practice sometimes you do need to tweak these values for one reason or another. In those cases it's nice not to have to resort to rebuilding from source. All tunables are visable to modinfo and the list is as follows: $ modinfo module/zfs/zfs.ko filename: module/zfs/zfs.ko license: CDDL author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory description: ZFS srcversion: 8EAB1D71DACE05B5AA61567 depends: spl,znvpair,zcommon,zunicode,zavl vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions parm: zvol_major:Major number for zvol device (uint) parm: zvol_threads:Number of threads for zvol device (uint) parm: zio_injection_enabled:Enable fault injection (int) parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int) parm: zio_delay_max:Max zio millisec delay before posting event (int) parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool) parm: zil_replay_disable:Disable intent logging replay (int) parm: zfs_nocacheflush:Disable cache flushes (bool) parm: zfs_read_chunk_size:Bytes to read per chunk (long) parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int) parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int) parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int) parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int) parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int) parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int) parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int) parm: zfs_vdev_scheduler:I/O scheduler (charp) parm: zfs_vdev_cache_max:Inflate reads small than max (int) parm: zfs_vdev_cache_size:Total size of the per-disk cache (int) parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int) parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int) parm: zfs_recover:Set to attempt to recover from fatal errors (int) parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp) parm: zfs_zevent_len_max:Max event queue length (int) parm: zfs_zevent_cols:Max event column width (int) parm: zfs_zevent_console:Log events to the console (int) parm: zfs_top_maxinflight:Max I/Os per top-level (int) parm: zfs_resilver_delay:Number of ticks to delay resilver (int) parm: zfs_scrub_delay:Number of ticks to delay scrub (int) parm: zfs_scan_idle:Idle window in clock ticks (int) parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int) parm: zfs_free_min_time_ms:Min millisecs to free per txg (int) parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int) parm: zfs_no_scrub_io:Set to disable scrub I/O (bool) parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool) parm: zfs_txg_timeout:Max seconds worth of delta per txg (int) parm: zfs_no_write_throttle:Disable write throttling (int) parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int) parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int) parm: zfs_write_limit_min:Min tgx write limit (ulong) parm: zfs_write_limit_max:Max tgx write limit (ulong) parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong) parm: zfs_write_limit_override:Override tgx write limit (ulong) parm: zfs_prefetch_disable:Disable all ZFS prefetching (int) parm: zfetch_max_streams:Max number of streams per zfetch (uint) parm: zfetch_min_sec_reap:Min time before stream reclaim (uint) parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint) parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong) parm: zfs_pd_blks_max:Max number of blocks to prefetch (int) parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int) parm: zfs_arc_min:Min arc size (ulong) parm: zfs_arc_max:Max arc size (ulong) parm: zfs_arc_meta_limit:Meta limit for arc size (ulong) parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int) parm: zfs_arc_grow_retry:Seconds before growing arc size (int) parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int) parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-03 22:09:28 +00:00
#endif