freebsd-nq/sys/netinet/tcp_var.h

741 lines
28 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1982, 1986, 1993, 1994, 1995
1994-05-24 10:09:53 +00:00
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)tcp_var.h 8.4 (Berkeley) 5/24/95
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-05-24 10:09:53 +00:00
*/
1994-08-21 05:27:42 +00:00
#ifndef _NETINET_TCP_VAR_H_
#define _NETINET_TCP_VAR_H_
#include <netinet/tcp.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#ifdef _KERNEL
#include <net/vnet.h>
Permit buiding kernels with options VIMAGE, restricted to only a single active network stack instance. Turning on options VIMAGE at compile time yields the following changes relative to default kernel build: 1) V_ accessor macros for virtualized variables resolve to structure fields via base pointers, instead of being resolved as fields in global structs or plain global variables. As an example, V_ifnet becomes: options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet default build: vnet_net_0._ifnet options VIMAGE_GLOBALS: ifnet 2) INIT_VNET_* macros will declare and set up base pointers to be used by V_ accessor macros, instead of resolving to whitespace: INIT_VNET_NET(ifp->if_vnet); becomes struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET]; 3) Memory for vnet modules registered via vnet_mod_register() is now allocated at run time in sys/kern/kern_vimage.c, instead of per vnet module structs being declared as globals. If required, vnet modules can now request the framework to provide them with allocated bzeroed memory by filling in the vmi_size field in their vmi_modinfo structures. 4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are extended to hold a pointer to the parent vnet. options VIMAGE builds will fill in those fields as required. 5) curvnet is introduced as a new global variable in options VIMAGE builds, always pointing to the default and only struct vnet. 6) struct sysctl_oid has been extended with additional two fields to store major and minor virtualization module identifiers, oid_v_subs and oid_v_mod. SYSCTL_V_* family of macros will fill in those fields accordingly, and store the offset in the appropriate vnet container struct in oid_arg1. In sysctl handlers dealing with virtualized sysctls, the SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target variable and make it available in arg1 variable for further processing. Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have been deleted. Reviewed by: bz, rwatson Approved by: julian (mentor)
2009-04-30 13:36:26 +00:00
1994-05-24 10:09:53 +00:00
/*
* Kernel variables for tcp.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, tcp_do_rfc1323);
#define V_tcp_do_rfc1323 VNET(tcp_do_rfc1323)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#endif /* _KERNEL */
1994-05-24 10:09:53 +00:00
/* TCP segment queue entry */
struct tseg_qent {
LIST_ENTRY(tseg_qent) tqe_q;
int tqe_len; /* TCP segment data length */
struct tcphdr *tqe_th; /* a pointer to tcp header */
struct mbuf *tqe_m; /* mbuf contains packet */
};
LIST_HEAD(tsegqe_head, tseg_qent);
struct sackblk {
tcp_seq start; /* start seq no. of sack block */
2004-06-25 02:29:58 +00:00
tcp_seq end; /* end seq no. */
};
struct sackhole {
tcp_seq start; /* start seq no. of hole */
tcp_seq end; /* end seq no. */
tcp_seq rxmit; /* next seq. no in hole to be retransmitted */
TAILQ_ENTRY(sackhole) scblink; /* scoreboard linkage */
};
2004-06-25 02:29:58 +00:00
struct sackhint {
struct sackhole *nexthole;
int sack_bytes_rexmit;
tcp_seq last_sack_ack; /* Most recent/largest sacked ack */
int ispare; /* explicit pad for 64bit alignment */
uint64_t _pad[2]; /* 1 sacked_bytes, 1 TBD */
};
struct tcptemp {
u_char tt_ipgen[40]; /* the size must be of max ip header, now IPv6 */
struct tcphdr tt_t;
};
#define tcp6cb tcpcb /* for KAME src sync over BSD*'s */
/* Neighbor Discovery, Neighbor Unreachability Detection Upper layer hint. */
#ifdef INET6
#define ND6_HINT(tp) \
do { \
if ((tp) && (tp)->t_inpcb && \
((tp)->t_inpcb->inp_vflag & INP_IPV6) != 0) \
nd6_nud_hint(NULL, NULL, 0); \
} while (0)
#else
#define ND6_HINT(tp)
#endif
1994-05-24 10:09:53 +00:00
/*
* Tcp control block, one per tcp; fields:
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
* Organized for 16 byte cacheline efficiency.
1994-05-24 10:09:53 +00:00
*/
struct tcpcb {
struct tsegqe_head t_segq; /* segment reassembly queue */
void *t_pspare[2]; /* new reassembly queue */
int t_segqlen; /* segment reassembly queue length */
int t_dupacks; /* consecutive dup acks recd */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
struct tcp_timer *t_timers; /* All the TCP timers in one struct */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
struct inpcb *t_inpcb; /* back pointer to internet pcb */
int t_state; /* state of this connection */
u_int t_flags;
1994-05-24 10:09:53 +00:00
Permit buiding kernels with options VIMAGE, restricted to only a single active network stack instance. Turning on options VIMAGE at compile time yields the following changes relative to default kernel build: 1) V_ accessor macros for virtualized variables resolve to structure fields via base pointers, instead of being resolved as fields in global structs or plain global variables. As an example, V_ifnet becomes: options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet default build: vnet_net_0._ifnet options VIMAGE_GLOBALS: ifnet 2) INIT_VNET_* macros will declare and set up base pointers to be used by V_ accessor macros, instead of resolving to whitespace: INIT_VNET_NET(ifp->if_vnet); becomes struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET]; 3) Memory for vnet modules registered via vnet_mod_register() is now allocated at run time in sys/kern/kern_vimage.c, instead of per vnet module structs being declared as globals. If required, vnet modules can now request the framework to provide them with allocated bzeroed memory by filling in the vmi_size field in their vmi_modinfo structures. 4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are extended to hold a pointer to the parent vnet. options VIMAGE builds will fill in those fields as required. 5) curvnet is introduced as a new global variable in options VIMAGE builds, always pointing to the default and only struct vnet. 6) struct sysctl_oid has been extended with additional two fields to store major and minor virtualization module identifiers, oid_v_subs and oid_v_mod. SYSCTL_V_* family of macros will fill in those fields accordingly, and store the offset in the appropriate vnet container struct in oid_arg1. In sysctl handlers dealing with virtualized sysctls, the SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target variable and make it available in arg1 variable for further processing. Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have been deleted. Reviewed by: bz, rwatson Approved by: julian (mentor)
2009-04-30 13:36:26 +00:00
struct vnet *t_vnet; /* back pointer to parent vnet */
1994-05-24 10:09:53 +00:00
tcp_seq snd_una; /* send unacknowledged */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
tcp_seq snd_max; /* highest sequence number sent;
* used to recognize retransmits
*/
1994-05-24 10:09:53 +00:00
tcp_seq snd_nxt; /* send next */
tcp_seq snd_up; /* send urgent pointer */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
1994-05-24 10:09:53 +00:00
tcp_seq snd_wl1; /* window update seg seq number */
tcp_seq snd_wl2; /* window update seg ack number */
tcp_seq iss; /* initial send sequence number */
tcp_seq irs; /* initial receive sequence number */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
tcp_seq rcv_nxt; /* receive next */
1994-05-24 10:09:53 +00:00
tcp_seq rcv_adv; /* advertised window */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_long rcv_wnd; /* receive window */
tcp_seq rcv_up; /* receive urgent pointer */
u_long snd_wnd; /* send window */
1994-05-24 10:09:53 +00:00
u_long snd_cwnd; /* congestion-controlled window */
u_long snd_spare1; /* unused */
u_long snd_ssthresh; /* snd_cwnd size threshold for
1994-05-24 10:09:53 +00:00
* for slow start exponential to
* linear switch
*/
u_long snd_spare2; /* unused */
tcp_seq snd_recover; /* for use in NewReno Fast Recovery */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_int t_maxopd; /* mss plus options */
u_int t_rcvtime; /* inactivity time */
u_int t_starttime; /* time connection was established */
u_int t_rtttime; /* RTT measurement start time */
1994-05-24 10:09:53 +00:00
tcp_seq t_rtseq; /* sequence number being timed */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_int t_bw_spare1; /* unused */
tcp_seq t_bw_spare2; /* unused */
int t_rxtcur; /* current retransmit value (ticks) */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_int t_maxseg; /* maximum segment size */
int t_srtt; /* smoothed round-trip time */
int t_rttvar; /* variance in round-trip time */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
int t_rxtshift; /* log(2) of rexmt exp. backoff */
u_int t_rttmin; /* minimum rtt allowed */
u_int t_rttbest; /* best rtt we've seen */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_long t_rttupdated; /* number of times rtt sampled */
1994-05-24 10:09:53 +00:00
u_long max_sndwnd; /* largest window peer has offered */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
int t_softerror; /* possible error not yet reported */
1994-05-24 10:09:53 +00:00
/* out-of-band data */
char t_oobflags; /* have some */
char t_iobc; /* input character */
/* RFC 1323 variables */
u_char snd_scale; /* window scaling for send window */
u_char rcv_scale; /* window scaling for recv window */
u_char request_r_scale; /* pending window scaling */
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
u_int32_t ts_recent; /* timestamp echo data */
u_int ts_recent_age; /* when last updated */
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
u_int32_t ts_offset; /* our timestamp offset */
1994-05-24 10:09:53 +00:00
tcp_seq last_ack_sent;
/* experimental */
u_long snd_cwnd_prev; /* cwnd prior to retransmit */
u_long snd_ssthresh_prev; /* ssthresh prior to retransmit */
tcp_seq snd_recover_prev; /* snd_recover prior to retransmit */
int t_sndzerowin; /* zero-window updates sent */
u_int t_badrxtwin; /* window for retransmit recovery */
u_char snd_limited; /* segments limited transmitted */
2004-06-25 02:29:58 +00:00
/* SACK related state */
int snd_numholes; /* number of holes seen by sender */
TAILQ_HEAD(sackhole_head, sackhole) snd_holes;
/* SACK scoreboard (sorted) */
tcp_seq snd_fack; /* last seq number(+1) sack'd by rcv'r*/
int rcv_numsacks; /* # distinct sack blks present */
struct sackblk sackblks[MAX_SACK_BLKS]; /* seq nos. of sack blocks */
tcp_seq sack_newdata; /* New data xmitted in this recovery
episode starts at this seq number */
struct sackhint sackhint; /* SACK scoreboard hint */
int t_rttlow; /* smallest observerved RTT */
u_int32_t rfbuf_ts; /* recv buffer autoscaling timestamp */
int rfbuf_cnt; /* recv buffer autoscaling byte count */
Permit buiding kernels with options VIMAGE, restricted to only a single active network stack instance. Turning on options VIMAGE at compile time yields the following changes relative to default kernel build: 1) V_ accessor macros for virtualized variables resolve to structure fields via base pointers, instead of being resolved as fields in global structs or plain global variables. As an example, V_ifnet becomes: options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet default build: vnet_net_0._ifnet options VIMAGE_GLOBALS: ifnet 2) INIT_VNET_* macros will declare and set up base pointers to be used by V_ accessor macros, instead of resolving to whitespace: INIT_VNET_NET(ifp->if_vnet); becomes struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET]; 3) Memory for vnet modules registered via vnet_mod_register() is now allocated at run time in sys/kern/kern_vimage.c, instead of per vnet module structs being declared as globals. If required, vnet modules can now request the framework to provide them with allocated bzeroed memory by filling in the vmi_size field in their vmi_modinfo structures. 4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are extended to hold a pointer to the parent vnet. options VIMAGE builds will fill in those fields as required. 5) curvnet is introduced as a new global variable in options VIMAGE builds, always pointing to the default and only struct vnet. 6) struct sysctl_oid has been extended with additional two fields to store major and minor virtualization module identifiers, oid_v_subs and oid_v_mod. SYSCTL_V_* family of macros will fill in those fields accordingly, and store the offset in the appropriate vnet container struct in oid_arg1. In sysctl handlers dealing with virtualized sysctls, the SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target variable and make it available in arg1 variable for further processing. Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have been deleted. Reviewed by: bz, rwatson Approved by: julian (mentor)
2009-04-30 13:36:26 +00:00
struct toe_usrreqs *t_tu; /* offload operations vector */
int t_sndrexmitpack; /* retransmit packets sent */
int t_rcvoopack; /* out-of-order packets received */
void *t_toe; /* TOE pcb pointer */
int t_bytes_acked; /* # bytes acked during current RTT */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
struct cc_algo *cc_algo; /* congestion control algorithm */
struct cc_var *ccv; /* congestion control specific vars */
struct osd *osd; /* storage for Khelp module data */
u_int t_keepinit; /* time to establish connection */
u_int t_keepidle; /* time before keepalive probes begin */
u_int t_keepintvl; /* interval between keepalives */
u_int t_keepcnt; /* number of keepalives before close */
uint32_t t_ispare[8]; /* 5 UTO, 3 TBD */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
void *t_pspare2[4]; /* 4 TBD */
uint64_t _pad[6]; /* 6 TBD (1-2 CC/RTT?) */
1994-05-24 10:09:53 +00:00
};
/*
* Flags and utility macros for the t_flags field.
*/
#define TF_ACKNOW 0x000001 /* ack peer immediately */
#define TF_DELACK 0x000002 /* ack, but try to delay it */
#define TF_NODELAY 0x000004 /* don't delay packets to coalesce */
#define TF_NOOPT 0x000008 /* don't use tcp options */
#define TF_SENTFIN 0x000010 /* have sent FIN */
#define TF_REQ_SCALE 0x000020 /* have/will request window scaling */
#define TF_RCVD_SCALE 0x000040 /* other side has requested scaling */
#define TF_REQ_TSTMP 0x000080 /* have/will request timestamps */
#define TF_RCVD_TSTMP 0x000100 /* a timestamp was received in SYN */
#define TF_SACK_PERMIT 0x000200 /* other side said I could SACK */
#define TF_NEEDSYN 0x000400 /* send SYN (implicit state) */
#define TF_NEEDFIN 0x000800 /* send FIN (implicit state) */
#define TF_NOPUSH 0x001000 /* don't push */
TCP reuses t_rxtshift to determine the backoff timer used for both the persist state and the retransmit timer. However, the code that implements "bad retransmit recovery" only checks t_rxtshift to see if an ACK has been received in during the first retransmit timeout window. As a result, if ticks has wrapped over to a negative value and a socket is in the persist state, it can incorrectly treat an ACK from the remote peer as a "bad retransmit recovery" and restore saved values such as snd_ssthresh and snd_cwnd. However, if the socket has never had a retransmit timeout, then these saved values will be zero, so snd_ssthresh and snd_cwnd will be set to 0. If the socket is in fast recovery (this can be caused by excessive duplicate ACKs such as those fixed by 220794), then each ACK that arrives triggers either NewReno or SACK partial ACK handling which clamps snd_cwnd to be no larger than snd_ssthresh. In effect, the socket's send window is permamently stuck at 0 even though the remote peer is advertising a much larger window and pending data is only sent via TCP window probes (so one byte every few seconds). Fix this by adding a new TCP pcb flag (TF_PREVVALID) that indicates that the various snd_*_prev fields in the pcb are valid and only perform "bad retransmit recovery" if this flag is set in the pcb. The flag is set on the first retransmit timeout that occurs and is cleared on subsequent retransmit timeouts or when entering the persist state. Reviewed by: bz MFC after: 2 weeks
2011-04-29 15:40:12 +00:00
#define TF_PREVVALID 0x002000 /* saved values for bad rxmit valid */
#define TF_MORETOCOME 0x010000 /* More data to be appended to sock */
#define TF_LQ_OVERFLOW 0x020000 /* listen queue overflow */
#define TF_LASTIDLE 0x040000 /* connection was previously idle */
#define TF_RXWIN0SENT 0x080000 /* sent a receiver win 0 in response */
#define TF_FASTRECOVERY 0x100000 /* in NewReno Fast Recovery */
#define TF_WASFRECOVERY 0x200000 /* was in NewReno Fast Recovery */
#define TF_SIGNATURE 0x400000 /* require MD5 digests (RFC2385) */
#define TF_FORCEDATA 0x800000 /* force out a byte */
#define TF_TSO 0x1000000 /* TSO enabled on this connection */
#define TF_TOE 0x2000000 /* this connection is offloaded */
#define TF_ECN_PERMIT 0x4000000 /* connection ECN-ready */
#define TF_ECN_SND_CWR 0x8000000 /* ECN CWR in queue */
#define TF_ECN_SND_ECE 0x10000000 /* ECN ECE in queue */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
#define TF_CONGRECOVERY 0x20000000 /* congestion recovery mode */
#define TF_WASCRECOVERY 0x40000000 /* was in congestion recovery */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
#define IN_FASTRECOVERY(t_flags) (t_flags & TF_FASTRECOVERY)
#define ENTER_FASTRECOVERY(t_flags) t_flags |= TF_FASTRECOVERY
#define EXIT_FASTRECOVERY(t_flags) t_flags &= ~TF_FASTRECOVERY
#define IN_CONGRECOVERY(t_flags) (t_flags & TF_CONGRECOVERY)
#define ENTER_CONGRECOVERY(t_flags) t_flags |= TF_CONGRECOVERY
#define EXIT_CONGRECOVERY(t_flags) t_flags &= ~TF_CONGRECOVERY
#define IN_RECOVERY(t_flags) (t_flags & (TF_CONGRECOVERY | TF_FASTRECOVERY))
#define ENTER_RECOVERY(t_flags) t_flags |= (TF_CONGRECOVERY | TF_FASTRECOVERY)
#define EXIT_RECOVERY(t_flags) t_flags &= ~(TF_CONGRECOVERY | TF_FASTRECOVERY)
#define BYTES_THIS_ACK(tp, th) (th->th_ack - tp->snd_una)
/*
* Flags for the t_oobflags field.
*/
#define TCPOOB_HAVEDATA 0x01
#define TCPOOB_HADDATA 0x02
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#ifdef TCP_SIGNATURE
/*
* Defines which are needed by the xform_tcp module and tcp_[in|out]put
* for SADB verification and lookup.
*/
#define TCP_SIGLEN 16 /* length of computed digest in bytes */
#define TCP_KEYLEN_MIN 1 /* minimum length of TCP-MD5 key */
#define TCP_KEYLEN_MAX 80 /* maximum length of TCP-MD5 key */
/*
* Only a single SA per host may be specified at this time. An SPI is
* needed in order for the KEY_ALLOCSA() lookup to work.
*/
#define TCP_SIG_SPI 0x1000
#endif /* TCP_SIGNATURE */
/*
* Structure to hold TCP options that are only used during segment
* processing (in tcp_input), but not held in the tcpcb.
* It's basically used to reduce the number of parameters
* to tcp_dooptions and tcp_addoptions.
* The binary order of the to_flags is relevant for packing of the
* options in tcp_addoptions.
*/
struct tcpopt {
u_int64_t to_flags; /* which options are present */
#define TOF_MSS 0x0001 /* maximum segment size */
#define TOF_SCALE 0x0002 /* window scaling */
#define TOF_SACKPERM 0x0004 /* SACK permitted */
#define TOF_TS 0x0010 /* timestamp */
#define TOF_SIGNATURE 0x0040 /* TCP-MD5 signature option (RFC2385) */
#define TOF_SACK 0x0080 /* Peer sent SACK option */
#define TOF_MAXOPT 0x0100
u_int32_t to_tsval; /* new timestamp */
u_int32_t to_tsecr; /* reflected timestamp */
u_char *to_sacks; /* pointer to the first SACK blocks */
u_char *to_signature; /* pointer to the TCP-MD5 signature */
u_int16_t to_mss; /* maximum segment size */
u_int8_t to_wscale; /* window scaling */
u_int8_t to_nsacks; /* number of SACK blocks */
u_int32_t to_spare; /* UTO */
};
/*
* Flags for tcp_dooptions.
*/
#define TO_SYN 0x01 /* parse SYN-only options */
struct hc_metrics_lite { /* must stay in sync with hc_metrics */
u_long rmx_mtu; /* MTU for this path */
u_long rmx_ssthresh; /* outbound gateway buffer limit */
u_long rmx_rtt; /* estimated round trip time */
u_long rmx_rttvar; /* estimated rtt variance */
u_long rmx_bandwidth; /* estimated bandwidth */
u_long rmx_cwnd; /* congestion window */
u_long rmx_sendpipe; /* outbound delay-bandwidth product */
u_long rmx_recvpipe; /* inbound delay-bandwidth product */
};
#ifndef _NETINET_IN_PCB_H_
struct in_conninfo;
#endif /* _NETINET_IN_PCB_H_ */
struct tcptw {
struct inpcb *tw_inpcb; /* XXX back pointer to internet pcb */
tcp_seq snd_nxt;
tcp_seq rcv_nxt;
tcp_seq iss;
tcp_seq irs;
u_short last_win; /* cached window value */
u_short tw_so_options; /* copy of so_options */
struct ucred *tw_cred; /* user credentials */
u_int32_t t_recent;
u_int32_t ts_offset; /* our timestamp offset */
u_int t_starttime;
int tw_time;
TAILQ_ENTRY(tcptw) tw_2msl;
};
1994-05-24 10:09:53 +00:00
#define intotcpcb(ip) ((struct tcpcb *)(ip)->inp_ppcb)
#define intotw(ip) ((struct tcptw *)(ip)->inp_ppcb)
1994-05-24 10:09:53 +00:00
#define sototcpcb(so) (intotcpcb(sotoinpcb(so)))
/*
* The smoothed round-trip time and estimated variance
* are stored as fixed point numbers scaled by the values below.
* For convenience, these scales are also used in smoothing the average
* (smoothed = (1/scale)sample + ((scale-1)/scale)smoothed).
* With these scales, srtt has 3 bits to the right of the binary point,
* and thus an "ALPHA" of 0.875. rttvar has 2 bits to the right of the
* binary point, and is smoothed with an ALPHA of 0.75.
*/
#define TCP_RTT_SCALE 32 /* multiplier for srtt; 3 bits frac. */
#define TCP_RTT_SHIFT 5 /* shift for srtt; 3 bits frac. */
#define TCP_RTTVAR_SCALE 16 /* multiplier for rttvar; 2 bits */
#define TCP_RTTVAR_SHIFT 4 /* shift for rttvar; 2 bits */
#define TCP_DELTA_SHIFT 2 /* see tcp_input.c */
1994-05-24 10:09:53 +00:00
/*
* The initial retransmission should happen at rtt + 4 * rttvar.
* Because of the way we do the smoothing, srtt and rttvar
* will each average +1/2 tick of bias. When we compute
* the retransmit timer, we want 1/2 tick of rounding and
* 1 extra tick because of +-1/2 tick uncertainty in the
* firing of the timer. The bias will give us exactly the
* 1.5 tick we need. But, because the bias is
* statistical, we have to test that we don't drop below
* the minimum feasible timer (which is 2 ticks).
* This version of the macro adapted from a paper by Lawrence
* Brakmo and Larry Peterson which outlines a problem caused
* by insufficient precision in the original implementation,
* which results in inappropriately large RTO values for very
* fast networks.
1994-05-24 10:09:53 +00:00
*/
#define TCP_REXMTVAL(tp) \
max((tp)->t_rttmin, (((tp)->t_srtt >> (TCP_RTT_SHIFT - TCP_DELTA_SHIFT)) \
+ (tp)->t_rttvar) >> TCP_DELTA_SHIFT)
1994-05-24 10:09:53 +00:00
/*
* TCP statistics.
* Many of these should be kept per connection,
* but that's inconvenient at the moment.
*/
struct tcpstat {
u_long tcps_connattempt; /* connections initiated */
u_long tcps_accepts; /* connections accepted */
u_long tcps_connects; /* connections established */
u_long tcps_drops; /* connections dropped */
u_long tcps_conndrops; /* embryonic connections dropped */
Limiters and sanity checks for TCP MSS (maximum segement size) resource exhaustion attacks. For network link optimization TCP can adjust its MSS and thus packet size according to the observed path MTU. This is done dynamically based on feedback from the remote host and network components along the packet path. This information can be abused to pretend an extremely low path MTU. The resource exhaustion works in two ways: o during tcp connection setup the advertized local MSS is exchanged between the endpoints. The remote endpoint can set this arbitrarily low (except for a minimum MTU of 64 octets enforced in the BSD code). When the local host is sending data it is forced to send many small IP packets instead of a large one. For example instead of the normal TCP payload size of 1448 it forces TCP payload size of 12 (MTU 64) and thus we have a 120 times increase in workload and packets. On fast links this quickly saturates the local CPU and may also hit pps processing limites of network components along the path. This type of attack is particularly effective for servers where the attacker can download large files (WWW and FTP). We mitigate it by enforcing a minimum MTU settable by sysctl net.inet.tcp.minmss defaulting to 256 octets. o the local host is reveiving data on a TCP connection from the remote host. The local host has no control over the packet size the remote host is sending. The remote host may chose to do what is described in the first attack and send the data in packets with an TCP payload of at least one byte. For each packet the tcp_input() function will be entered, the packet is processed and a sowakeup() is signalled to the connected process. For example an attack with 2 Mbit/s gives 4716 packets per second and the same amount of sowakeup()s to the process (and context switches). This type of attack is particularly effective for servers where the attacker can upload large amounts of data. Normally this is the case with WWW server where large POSTs can be made. We mitigate this by calculating the average MSS payload per second. If it goes below 'net.inet.tcp.minmss' and the pps rate is above 'net.inet.tcp.minmssoverload' defaulting to 1000 this particular TCP connection is resetted and dropped. MITRE CVE: CAN-2004-0002 Reviewed by: sam (mentor) MFC after: 1 day
2004-01-08 17:40:07 +00:00
u_long tcps_minmssdrops; /* average minmss too low drops */
1994-05-24 10:09:53 +00:00
u_long tcps_closed; /* conn. closed (includes drops) */
u_long tcps_segstimed; /* segs where we tried to get rtt */
u_long tcps_rttupdated; /* times we succeeded */
u_long tcps_delack; /* delayed acks sent */
u_long tcps_timeoutdrop; /* conn. dropped in rxmt timeout */
u_long tcps_rexmttimeo; /* retransmit timeouts */
u_long tcps_persisttimeo; /* persist timeouts */
u_long tcps_keeptimeo; /* keepalive timeouts */
u_long tcps_keepprobe; /* keepalive probes sent */
u_long tcps_keepdrops; /* connections dropped in keepalive */
u_long tcps_sndtotal; /* total packets sent */
u_long tcps_sndpack; /* data packets sent */
u_long tcps_sndbyte; /* data bytes sent */
u_long tcps_sndrexmitpack; /* data packets retransmitted */
u_long tcps_sndrexmitbyte; /* data bytes retransmitted */
u_long tcps_sndrexmitbad; /* unnecessary packet retransmissions */
1994-05-24 10:09:53 +00:00
u_long tcps_sndacks; /* ack-only packets sent */
u_long tcps_sndprobe; /* window probes sent */
u_long tcps_sndurg; /* packets sent with URG only */
u_long tcps_sndwinup; /* window update-only packets sent */
u_long tcps_sndctrl; /* control (SYN|FIN|RST) packets sent */
u_long tcps_rcvtotal; /* total packets received */
u_long tcps_rcvpack; /* packets received in sequence */
u_long tcps_rcvbyte; /* bytes received in sequence */
u_long tcps_rcvbadsum; /* packets received with ccksum errs */
u_long tcps_rcvbadoff; /* packets received with bad offset */
u_long tcps_rcvmemdrop; /* packets dropped for lack of memory */
1994-05-24 10:09:53 +00:00
u_long tcps_rcvshort; /* packets received too short */
u_long tcps_rcvduppack; /* duplicate-only packets received */
u_long tcps_rcvdupbyte; /* duplicate-only bytes received */
u_long tcps_rcvpartduppack; /* packets with some duplicate data */
u_long tcps_rcvpartdupbyte; /* dup. bytes in part-dup. packets */
u_long tcps_rcvoopack; /* out-of-order packets received */
u_long tcps_rcvoobyte; /* out-of-order bytes received */
u_long tcps_rcvpackafterwin; /* packets with data after window */
u_long tcps_rcvbyteafterwin; /* bytes rcvd after window */
u_long tcps_rcvafterclose; /* packets rcvd after "close" */
u_long tcps_rcvwinprobe; /* rcvd window probe packets */
u_long tcps_rcvdupack; /* rcvd duplicate acks */
u_long tcps_rcvacktoomuch; /* rcvd acks for unsent data */
u_long tcps_rcvackpack; /* rcvd ack packets */
u_long tcps_rcvackbyte; /* bytes acked by rcvd acks */
u_long tcps_rcvwinupd; /* rcvd window update packets */
u_long tcps_pawsdrop; /* segments dropped due to PAWS */
u_long tcps_predack; /* times hdr predict ok for acks */
u_long tcps_preddat; /* times hdr predict ok for data pkts */
u_long tcps_pcbcachemiss;
u_long tcps_cachedrtt; /* times cached RTT in route updated */
u_long tcps_cachedrttvar; /* times cached rttvar updated */
u_long tcps_cachedssthresh; /* times cached ssthresh updated */
u_long tcps_usedrtt; /* times RTT initialized from route */
u_long tcps_usedrttvar; /* times RTTVAR initialized from rt */
u_long tcps_usedssthresh; /* times ssthresh initialized from rt*/
u_long tcps_persistdrop; /* timeout in persist state */
u_long tcps_badsyn; /* bogus SYN, e.g. premature ACK */
u_long tcps_mturesent; /* resends due to MTU discovery */
u_long tcps_listendrop; /* listen queue overflows */
u_long tcps_badrst; /* ignored RSTs in the window */
u_long tcps_sc_added; /* entry added to syncache */
u_long tcps_sc_retransmitted; /* syncache entry was retransmitted */
u_long tcps_sc_dupsyn; /* duplicate SYN packet */
u_long tcps_sc_dropped; /* could not reply to packet */
u_long tcps_sc_completed; /* successful extraction of entry */
u_long tcps_sc_bucketoverflow; /* syncache per-bucket limit hit */
u_long tcps_sc_cacheoverflow; /* syncache cache limit hit */
u_long tcps_sc_reset; /* RST removed entry from syncache */
u_long tcps_sc_stale; /* timed out or listen socket gone */
u_long tcps_sc_aborted; /* syncache entry aborted */
u_long tcps_sc_badack; /* removed due to bad ACK */
u_long tcps_sc_unreach; /* ICMP unreachable received */
u_long tcps_sc_zonefail; /* zalloc() failed */
u_long tcps_sc_sendcookie; /* SYN cookie sent */
u_long tcps_sc_recvcookie; /* SYN cookie received */
u_long tcps_hc_added; /* entry added to hostcache */
u_long tcps_hc_bucketoverflow; /* hostcache per bucket limit hit */
u_long tcps_finwait2_drops; /* Drop FIN_WAIT_2 connection after time limit */
/* SACK related stats */
u_long tcps_sack_recovery_episode; /* SACK recovery episodes */
u_long tcps_sack_rexmits; /* SACK rexmit segments */
u_long tcps_sack_rexmit_bytes; /* SACK rexmit bytes */
u_long tcps_sack_rcv_blocks; /* SACK blocks (options) received */
u_long tcps_sack_send_blocks; /* SACK blocks (options) sent */
2011-01-07 21:40:34 +00:00
u_long tcps_sack_sboverflow; /* times scoreboard overflowed */
/* ECN related stats */
u_long tcps_ecn_ce; /* ECN Congestion Experienced */
u_long tcps_ecn_ect0; /* ECN Capable Transport */
u_long tcps_ecn_ect1; /* ECN Capable Transport */
u_long tcps_ecn_shs; /* ECN successful handshakes */
u_long tcps_ecn_rcwnd; /* # times ECN reduced the cwnd */
/* TCP_SIGNATURE related stats */
u_long tcps_sig_rcvgoodsig; /* Total matching signature received */
u_long tcps_sig_rcvbadsig; /* Total bad signature received */
u_long tcps_sig_err_buildsig; /* Mismatching signature received */
u_long tcps_sig_err_sigopt; /* No signature expected by socket */
u_long tcps_sig_err_nosigopt; /* No signature provided by segment */
u_long _pad[12]; /* 6 UTO, 6 TBD */
1994-05-24 10:09:53 +00:00
};
#ifdef _KERNEL
/*
* In-kernel consumers can use these accessor macros directly to update
* stats.
*/
#define TCPSTAT_ADD(name, val) V_tcpstat.name += (val)
#define TCPSTAT_INC(name) TCPSTAT_ADD(name, 1)
/*
* Kernel module consumers must use this accessor macro.
*/
void kmod_tcpstat_inc(int statnum);
#define KMOD_TCPSTAT_INC(name) \
kmod_tcpstat_inc(offsetof(struct tcpstat, name) / sizeof(u_long))
/*
* TCP specific helper hook point identifiers.
*/
#define HHOOK_TCP_EST_IN 0
#define HHOOK_TCP_EST_OUT 1
#define HHOOK_TCP_LAST HHOOK_TCP_EST_OUT
struct tcp_hhook_data {
struct tcpcb *tp;
struct tcphdr *th;
struct tcpopt *to;
long len;
int tso;
tcp_seq curack;
};
#endif
/*
* TCB structure exported to user-land via sysctl(3).
* Evil hack: declare only if in_pcb.h and sys/socketvar.h have been
* included. Not all of our clients do.
*/
#if defined(_NETINET_IN_PCB_H_) && defined(_SYS_SOCKETVAR_H_)
struct xtcp_timer {
int tt_rexmt; /* retransmit timer */
int tt_persist; /* retransmit persistence */
int tt_keep; /* keepalive */
int tt_2msl; /* 2*msl TIME_WAIT timer */
int tt_delack; /* delayed ACK timer */
2011-01-07 21:40:34 +00:00
int t_rcvtime; /* Time since last packet received */
};
struct xtcpcb {
size_t xt_len;
struct inpcb xt_inp;
struct tcpcb xt_tp;
struct xsocket xt_socket;
struct xtcp_timer xt_timer;
u_quad_t xt_alignment_hack;
};
#endif
/*
* Names for TCP sysctl objects
*/
#define TCPCTL_DO_RFC1323 1 /* use RFC-1323 extensions */
#define TCPCTL_MSSDFLT 3 /* MSS default */
#define TCPCTL_STATS 4 /* statistics (read-only) */
#define TCPCTL_RTTDFLT 5 /* default RTT estimate */
#define TCPCTL_KEEPIDLE 6 /* keepalive idle timer */
#define TCPCTL_KEEPINTVL 7 /* interval to send keepalives */
#define TCPCTL_SENDSPACE 8 /* send buffer space */
#define TCPCTL_RECVSPACE 9 /* receive buffer space */
#define TCPCTL_KEEPINIT 10 /* timeout for establishing syn */
#define TCPCTL_PCBLIST 11 /* list of all outstanding PCBs */
#define TCPCTL_DELACKTIME 12 /* time before sending delayed ACK */
#define TCPCTL_V6MSSDFLT 13 /* MSS default for IPv6 */
#define TCPCTL_SACK 14 /* Selective Acknowledgement,rfc 2018 */
#define TCPCTL_DROP 15 /* drop tcp connection */
#define TCPCTL_MAXID 16
#define TCPCTL_FINWAIT2_TIMEOUT 17
#define TCPCTL_NAMES { \
{ 0, 0 }, \
{ "rfc1323", CTLTYPE_INT }, \
{ "mssdflt", CTLTYPE_INT }, \
{ "stats", CTLTYPE_STRUCT }, \
{ "rttdflt", CTLTYPE_INT }, \
{ "keepidle", CTLTYPE_INT }, \
{ "keepintvl", CTLTYPE_INT }, \
{ "sendspace", CTLTYPE_INT }, \
{ "recvspace", CTLTYPE_INT }, \
{ "keepinit", CTLTYPE_INT }, \
{ "pcblist", CTLTYPE_STRUCT }, \
{ "delacktime", CTLTYPE_INT }, \
{ "v6mssdflt", CTLTYPE_INT }, \
{ "maxid", CTLTYPE_INT }, \
}
#ifdef _KERNEL
#ifdef SYSCTL_DECL
SYSCTL_DECL(_net_inet_tcp);
SYSCTL_DECL(_net_inet_tcp_sack);
MALLOC_DECLARE(M_TCPLOG);
#endif
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(struct inpcbhead, tcb); /* queue of active tcpcb's */
VNET_DECLARE(struct inpcbinfo, tcbinfo);
VNET_DECLARE(struct tcpstat, tcpstat); /* tcp statistics */
extern int tcp_log_in_vain;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, tcp_mssdflt); /* XXX */
VNET_DECLARE(int, tcp_minmss);
VNET_DECLARE(int, tcp_delack_enabled);
VNET_DECLARE(int, tcp_do_rfc3390);
VNET_DECLARE(int, tcp_sendspace);
VNET_DECLARE(int, tcp_recvspace);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, path_mtu_discovery);
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
VNET_DECLARE(int, tcp_do_rfc3465);
VNET_DECLARE(int, tcp_abc_l_var);
#define V_tcb VNET(tcb)
#define V_tcbinfo VNET(tcbinfo)
#define V_tcpstat VNET(tcpstat)
#define V_tcp_mssdflt VNET(tcp_mssdflt)
#define V_tcp_minmss VNET(tcp_minmss)
#define V_tcp_delack_enabled VNET(tcp_delack_enabled)
#define V_tcp_do_rfc3390 VNET(tcp_do_rfc3390)
#define V_tcp_sendspace VNET(tcp_sendspace)
#define V_tcp_recvspace VNET(tcp_recvspace)
#define V_path_mtu_discovery VNET(path_mtu_discovery)
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
#define V_tcp_do_rfc3465 VNET(tcp_do_rfc3465)
#define V_tcp_abc_l_var VNET(tcp_abc_l_var)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, tcp_do_sack); /* SACK enabled/disabled */
VNET_DECLARE(int, tcp_sc_rst_sock_fail); /* RST on sock alloc failure */
#define V_tcp_do_sack VNET(tcp_do_sack)
#define V_tcp_sc_rst_sock_fail VNET(tcp_sc_rst_sock_fail)
VNET_DECLARE(int, tcp_do_ecn); /* TCP ECN enabled/disabled */
VNET_DECLARE(int, tcp_ecn_maxretries);
#define V_tcp_do_ecn VNET(tcp_do_ecn)
#define V_tcp_ecn_maxretries VNET(tcp_ecn_maxretries)
VNET_DECLARE(struct hhook_head *, tcp_hhh[HHOOK_TCP_LAST + 1]);
#define V_tcp_hhh VNET(tcp_hhh)
int tcp_addoptions(struct tcpopt *, u_char *);
int tcp_ccalgounload(struct cc_algo *unload_algo);
1994-05-24 10:09:53 +00:00
struct tcpcb *
2002-03-19 21:25:46 +00:00
tcp_close(struct tcpcb *);
Update TCP for infrastructural changes to the socket/pcb refcount model, pru_abort(), pru_detach(), and in_pcbdetach(): - Universally support and enforce the invariant that so_pcb is never NULL, converting dozens of unnecessary NULL checks into assertions, and eliminating dozens of unnecessary error handling cases in protocol code. - In some cases, eliminate unnecessary pcbinfo locking, as it is no longer required to ensure so_pcb != NULL. For example, the receive code no longer requires the pcbinfo lock, and the send code only requires it if building a new connection on an otherwise unconnected socket triggered via sendto() with an address. This should significnatly reduce tcbinfo lock contention in the receive and send cases. - In order to support the invariant that so_pcb != NULL, it is now necessary for the TCP code to not discard the tcpcb any time a connection is dropped, but instead leave the tcpcb until the socket is shutdown. This case is handled by setting INP_DROPPED, to substitute for using a NULL so_pcb to indicate that the connection has been dropped. This requires the inpcb lock, but not the pcbinfo lock. - Unlike all other protocols in the tree, TCP may need to retain access to the socket after the file descriptor has been closed. Set SS_PROTOREF in tcp_detach() in order to prevent the socket from being freed, and add a flag, INP_SOCKREF, so that the TCP code knows whether or not it needs to free the socket when the connection finally does close. The typical case where this occurs is if close() is called on a TCP socket before all sent data in the send socket buffer has been transmitted or acknowledged. If INP_SOCKREF is found when the connection is dropped, we release the inpcb, tcpcb, and socket instead of flagging INP_DROPPED. - Abort and detach protocol switch methods no longer return failures, nor attempt to free sockets, as the socket layer does this. - Annotate the existence of a long-standing race in the TCP timer code, in which timers are stopped but not drained when the socket is freed, as waiting for drain may lead to deadlocks, or have to occur in a context where waiting is not permitted. This race has been handled by testing to see if the tcpcb pointer in the inpcb is NULL (and vice versa), which is not normally permitted, but may be true of a inpcb and tcpcb have been freed. Add a counter to test how often this race has actually occurred, and a large comment for each instance where we compare potentially freed memory with NULL. This will have to be fixed in the near future, but requires is to further address how to handle the timer shutdown shutdown issue. - Several TCP calls no longer potentially free the passed inpcb/tcpcb, so no longer need to return a pointer to indicate whether the argument passed in is still valid. - Un-macroize debugging and locking setup for various protocol switch methods for TCP, as it lead to more obscurity, and as locking becomes more customized to the methods, offers less benefit. - Assert copyright on tcp_usrreq.c due to significant modifications that have been made as part of this work. These changes significantly modify the memory management and connection logic of our TCP implementation, and are (as such) High Risk Changes, and likely to contain serious bugs. Please report problems to the current@ mailing list ASAP, ideally with simple test cases, and optionally, packet traces. MFC after: 3 months
2006-04-01 16:36:36 +00:00
void tcp_discardcb(struct tcpcb *);
void tcp_twstart(struct tcpcb *);
#if 0
int tcp_twrecycleable(struct tcptw *tw);
#endif
Update TCP for infrastructural changes to the socket/pcb refcount model, pru_abort(), pru_detach(), and in_pcbdetach(): - Universally support and enforce the invariant that so_pcb is never NULL, converting dozens of unnecessary NULL checks into assertions, and eliminating dozens of unnecessary error handling cases in protocol code. - In some cases, eliminate unnecessary pcbinfo locking, as it is no longer required to ensure so_pcb != NULL. For example, the receive code no longer requires the pcbinfo lock, and the send code only requires it if building a new connection on an otherwise unconnected socket triggered via sendto() with an address. This should significnatly reduce tcbinfo lock contention in the receive and send cases. - In order to support the invariant that so_pcb != NULL, it is now necessary for the TCP code to not discard the tcpcb any time a connection is dropped, but instead leave the tcpcb until the socket is shutdown. This case is handled by setting INP_DROPPED, to substitute for using a NULL so_pcb to indicate that the connection has been dropped. This requires the inpcb lock, but not the pcbinfo lock. - Unlike all other protocols in the tree, TCP may need to retain access to the socket after the file descriptor has been closed. Set SS_PROTOREF in tcp_detach() in order to prevent the socket from being freed, and add a flag, INP_SOCKREF, so that the TCP code knows whether or not it needs to free the socket when the connection finally does close. The typical case where this occurs is if close() is called on a TCP socket before all sent data in the send socket buffer has been transmitted or acknowledged. If INP_SOCKREF is found when the connection is dropped, we release the inpcb, tcpcb, and socket instead of flagging INP_DROPPED. - Abort and detach protocol switch methods no longer return failures, nor attempt to free sockets, as the socket layer does this. - Annotate the existence of a long-standing race in the TCP timer code, in which timers are stopped but not drained when the socket is freed, as waiting for drain may lead to deadlocks, or have to occur in a context where waiting is not permitted. This race has been handled by testing to see if the tcpcb pointer in the inpcb is NULL (and vice versa), which is not normally permitted, but may be true of a inpcb and tcpcb have been freed. Add a counter to test how often this race has actually occurred, and a large comment for each instance where we compare potentially freed memory with NULL. This will have to be fixed in the near future, but requires is to further address how to handle the timer shutdown shutdown issue. - Several TCP calls no longer potentially free the passed inpcb/tcpcb, so no longer need to return a pointer to indicate whether the argument passed in is still valid. - Un-macroize debugging and locking setup for various protocol switch methods for TCP, as it lead to more obscurity, and as locking becomes more customized to the methods, offers less benefit. - Assert copyright on tcp_usrreq.c due to significant modifications that have been made as part of this work. These changes significantly modify the memory management and connection logic of our TCP implementation, and are (as such) High Risk Changes, and likely to contain serious bugs. Please report problems to the current@ mailing list ASAP, ideally with simple test cases, and optionally, packet traces. MFC after: 3 months
2006-04-01 16:36:36 +00:00
void tcp_twclose(struct tcptw *_tw, int _reuse);
2002-03-19 21:25:46 +00:00
void tcp_ctlinput(int, struct sockaddr *, void *);
int tcp_ctloutput(struct socket *, struct sockopt *);
1994-05-24 10:09:53 +00:00
struct tcpcb *
2002-03-19 21:25:46 +00:00
tcp_drop(struct tcpcb *, int);
void tcp_drain(void);
void tcp_init(void);
#ifdef VIMAGE
void tcp_destroy(void);
#endif
void tcp_fini(void *);
2011-01-07 21:40:34 +00:00
char *tcp_log_addrs(struct in_conninfo *, struct tcphdr *, void *,
const void *);
char *tcp_log_vain(struct in_conninfo *, struct tcphdr *, void *,
const void *);
int tcp_reass(struct tcpcb *, struct tcphdr *, int *, struct mbuf *);
void tcp_reass_init(void);
void tcp_reass_flush(struct tcpcb *);
#ifdef VIMAGE
void tcp_reass_destroy(void);
#endif
2002-03-19 21:25:46 +00:00
void tcp_input(struct mbuf *, int);
u_long tcp_maxmtu(struct in_conninfo *, int *);
u_long tcp_maxmtu6(struct in_conninfo *, int *);
void tcp_mss_update(struct tcpcb *, int, struct hc_metrics_lite *, int *);
2002-03-19 21:25:46 +00:00
void tcp_mss(struct tcpcb *, int);
int tcp_mssopt(struct in_conninfo *);
struct inpcb *
tcp_drop_syn_sent(struct inpcb *, int);
struct inpcb *
tcp_mtudisc(struct inpcb *, int);
1994-05-24 10:09:53 +00:00
struct tcpcb *
2002-03-19 21:25:46 +00:00
tcp_newtcpcb(struct inpcb *);
int tcp_output(struct tcpcb *);
void tcp_respond(struct tcpcb *, void *,
struct tcphdr *, struct mbuf *, tcp_seq, tcp_seq, int);
void tcp_tw_init(void);
#ifdef VIMAGE
void tcp_tw_destroy(void);
#endif
void tcp_tw_zone_change(void);
int tcp_twcheck(struct inpcb *, struct tcpopt *, struct tcphdr *,
struct mbuf *, int);
int tcp_twrespond(struct tcptw *, int);
2002-03-19 21:25:46 +00:00
void tcp_setpersist(struct tcpcb *);
2004-02-13 18:21:45 +00:00
#ifdef TCP_SIGNATURE
int tcp_signature_compute(struct mbuf *, int, int, int, u_char *, u_int);
int tcp_signature_verify(struct mbuf *, int, int, int, struct tcpopt *,
struct tcphdr *, u_int);
2004-02-13 18:21:45 +00:00
#endif
2002-03-19 21:25:46 +00:00
void tcp_slowtimo(void);
struct tcptemp *
tcpip_maketemplate(struct inpcb *);
void tcpip_fillheaders(struct inpcb *, void *, void *);
void tcp_timer_activate(struct tcpcb *, int, u_int);
int tcp_timer_active(struct tcpcb *, int);
void tcp_trace(short, short, struct tcpcb *, void *, struct tcphdr *, int);
/*
* All tcp_hc_* functions are IPv4 and IPv6 (via in_conninfo)
*/
void tcp_hc_init(void);
#ifdef VIMAGE
void tcp_hc_destroy(void);
#endif
void tcp_hc_get(struct in_conninfo *, struct hc_metrics_lite *);
u_long tcp_hc_getmtu(struct in_conninfo *);
void tcp_hc_updatemtu(struct in_conninfo *, u_long);
void tcp_hc_update(struct in_conninfo *, struct hc_metrics_lite *);
extern struct pr_usrreqs tcp_usrreqs;
2002-03-19 21:25:46 +00:00
tcp_seq tcp_new_isn(struct tcpcb *);
void tcp_sack_doack(struct tcpcb *, struct tcpopt *, tcp_seq);
void tcp_update_sack_list(struct tcpcb *tp, tcp_seq rcv_laststart, tcp_seq rcv_lastend);
void tcp_clean_sackreport(struct tcpcb *tp);
void tcp_sack_adjust(struct tcpcb *tp);
struct sackhole *tcp_sack_output(struct tcpcb *tp, int *sack_bytes_rexmt);
void tcp_sack_partialack(struct tcpcb *, struct tcphdr *);
void tcp_free_sackholes(struct tcpcb *tp);
int tcp_newreno(struct tcpcb *, struct tcphdr *);
u_long tcp_seq_subtract(u_long, u_long );
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
void cc_cong_signal(struct tcpcb *tp, struct tcphdr *th, uint32_t type);
#endif /* _KERNEL */
1994-08-21 05:27:42 +00:00
#endif /* _NETINET_TCP_VAR_H_ */