freebsd-nq/module/zfs/zfs_replay.c

985 lines
26 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012 Cyril Plisko. All rights reserved.
* Copyright (c) 2013, 2017 by Delphix. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/sysmacros.h>
#include <sys/cmn_err.h>
#include <sys/kmem.h>
#include <sys/thread.h>
#include <sys/file.h>
#include <sys/fcntl.h>
#include <sys/vfs.h>
#include <sys/fs/zfs.h>
#include <sys/zfs_znode.h>
#include <sys/zfs_dir.h>
#include <sys/zfs_acl.h>
#include <sys/zfs_fuid.h>
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
#include <sys/zfs_vnops.h>
2008-11-20 20:01:55 +00:00
#include <sys/spa.h>
#include <sys/zil.h>
#include <sys/byteorder.h>
#include <sys/stat.h>
#include <sys/mode.h>
#include <sys/acl.h>
#include <sys/atomic.h>
#include <sys/cred.h>
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
#include <sys/zpl.h>
2008-11-20 20:01:55 +00:00
/*
* Functions to replay ZFS intent log (ZIL) records
* The functions are called through a function vector (zfs_replay_vector)
* which is indexed by the transaction type.
*/
static void
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
zfs_init_vattr(vattr_t *vap, uint64_t mask, uint64_t mode,
uint64_t uid, uint64_t gid, uint64_t rdev, uint64_t nodeid)
2008-11-20 20:01:55 +00:00
{
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
bzero(vap, sizeof (*vap));
vap->va_mask = (uint_t)mask;
vap->va_type = IFTOVT(mode);
vap->va_mode = mode;
vap->va_uid = (uid_t)(IS_EPHEMERAL(uid)) ? -1 : uid;
vap->va_gid = (gid_t)(IS_EPHEMERAL(gid)) ? -1 : gid;
vap->va_rdev = rdev;
vap->va_nodeid = nodeid;
2008-11-20 20:01:55 +00:00
}
/* ARGSUSED */
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_error(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
return (SET_ERROR(ENOTSUP));
2008-11-20 20:01:55 +00:00
}
static void
zfs_replay_xvattr(lr_attr_t *lrattr, xvattr_t *xvap)
{
xoptattr_t *xoap = NULL;
uint64_t *attrs;
uint64_t *crtime;
uint32_t *bitmap;
void *scanstamp;
int i;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
xvap->xva_vattr.va_mask |= ATTR_XVATTR;
2008-11-20 20:01:55 +00:00
if ((xoap = xva_getxoptattr(xvap)) == NULL) {
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
xvap->xva_vattr.va_mask &= ~ATTR_XVATTR; /* shouldn't happen */
2008-11-20 20:01:55 +00:00
return;
}
ASSERT(lrattr->lr_attr_masksize == xvap->xva_mapsize);
bitmap = &lrattr->lr_attr_bitmap;
for (i = 0; i != lrattr->lr_attr_masksize; i++, bitmap++)
xvap->xva_reqattrmap[i] = *bitmap;
attrs = (uint64_t *)(lrattr + lrattr->lr_attr_masksize - 1);
crtime = attrs + 1;
scanstamp = (caddr_t)(crtime + 2);
if (XVA_ISSET_REQ(xvap, XAT_HIDDEN))
xoap->xoa_hidden = ((*attrs & XAT0_HIDDEN) != 0);
if (XVA_ISSET_REQ(xvap, XAT_SYSTEM))
xoap->xoa_system = ((*attrs & XAT0_SYSTEM) != 0);
if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE))
xoap->xoa_archive = ((*attrs & XAT0_ARCHIVE) != 0);
if (XVA_ISSET_REQ(xvap, XAT_READONLY))
xoap->xoa_readonly = ((*attrs & XAT0_READONLY) != 0);
if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE))
xoap->xoa_immutable = ((*attrs & XAT0_IMMUTABLE) != 0);
if (XVA_ISSET_REQ(xvap, XAT_NOUNLINK))
xoap->xoa_nounlink = ((*attrs & XAT0_NOUNLINK) != 0);
if (XVA_ISSET_REQ(xvap, XAT_APPENDONLY))
xoap->xoa_appendonly = ((*attrs & XAT0_APPENDONLY) != 0);
if (XVA_ISSET_REQ(xvap, XAT_NODUMP))
xoap->xoa_nodump = ((*attrs & XAT0_NODUMP) != 0);
if (XVA_ISSET_REQ(xvap, XAT_OPAQUE))
xoap->xoa_opaque = ((*attrs & XAT0_OPAQUE) != 0);
if (XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED))
xoap->xoa_av_modified = ((*attrs & XAT0_AV_MODIFIED) != 0);
if (XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED))
xoap->xoa_av_quarantined =
((*attrs & XAT0_AV_QUARANTINED) != 0);
if (XVA_ISSET_REQ(xvap, XAT_CREATETIME))
ZFS_TIME_DECODE(&xoap->xoa_createtime, crtime);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
if (XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP)) {
ASSERT(!XVA_ISSET_REQ(xvap, XAT_PROJID));
2008-11-20 20:01:55 +00:00
bcopy(scanstamp, xoap->xoa_av_scanstamp, AV_SCANSTAMP_SZ);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
} else if (XVA_ISSET_REQ(xvap, XAT_PROJID)) {
/*
* XAT_PROJID and XAT_AV_SCANSTAMP will never be valid
* at the same time, so we can share the same space.
*/
bcopy(scanstamp, &xoap->xoa_projid, sizeof (uint64_t));
}
if (XVA_ISSET_REQ(xvap, XAT_REPARSE))
xoap->xoa_reparse = ((*attrs & XAT0_REPARSE) != 0);
if (XVA_ISSET_REQ(xvap, XAT_OFFLINE))
xoap->xoa_offline = ((*attrs & XAT0_OFFLINE) != 0);
if (XVA_ISSET_REQ(xvap, XAT_SPARSE))
xoap->xoa_sparse = ((*attrs & XAT0_SPARSE) != 0);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
if (XVA_ISSET_REQ(xvap, XAT_PROJINHERIT))
xoap->xoa_projinherit = ((*attrs & XAT0_PROJINHERIT) != 0);
2008-11-20 20:01:55 +00:00
}
static int
zfs_replay_domain_cnt(uint64_t uid, uint64_t gid)
{
uint64_t uid_idx;
uint64_t gid_idx;
int domcnt = 0;
uid_idx = FUID_INDEX(uid);
gid_idx = FUID_INDEX(gid);
if (uid_idx)
domcnt++;
if (gid_idx > 0 && gid_idx != uid_idx)
domcnt++;
return (domcnt);
}
static void *
zfs_replay_fuid_domain_common(zfs_fuid_info_t *fuid_infop, void *start,
int domcnt)
{
int i;
for (i = 0; i != domcnt; i++) {
fuid_infop->z_domain_table[i] = start;
start = (caddr_t)start + strlen(start) + 1;
}
return (start);
}
/*
* Set the uid/gid in the fuid_info structure.
*/
static void
zfs_replay_fuid_ugid(zfs_fuid_info_t *fuid_infop, uint64_t uid, uint64_t gid)
{
/*
* If owner or group are log specific FUIDs then slurp up
* domain information and build zfs_fuid_info_t
*/
if (IS_EPHEMERAL(uid))
fuid_infop->z_fuid_owner = uid;
if (IS_EPHEMERAL(gid))
fuid_infop->z_fuid_group = gid;
}
/*
* Load fuid domains into fuid_info_t
*/
static zfs_fuid_info_t *
zfs_replay_fuid_domain(void *buf, void **end, uint64_t uid, uint64_t gid)
{
int domcnt;
zfs_fuid_info_t *fuid_infop;
fuid_infop = zfs_fuid_info_alloc();
domcnt = zfs_replay_domain_cnt(uid, gid);
if (domcnt == 0)
return (fuid_infop);
fuid_infop->z_domain_table =
kmem_zalloc(domcnt * sizeof (char *), KM_SLEEP);
2008-11-20 20:01:55 +00:00
zfs_replay_fuid_ugid(fuid_infop, uid, gid);
fuid_infop->z_domain_cnt = domcnt;
*end = zfs_replay_fuid_domain_common(fuid_infop, buf, domcnt);
return (fuid_infop);
}
/*
* load zfs_fuid_t's and fuid_domains into fuid_info_t
*/
static zfs_fuid_info_t *
zfs_replay_fuids(void *start, void **end, int idcnt, int domcnt, uint64_t uid,
uint64_t gid)
{
uint64_t *log_fuid = (uint64_t *)start;
zfs_fuid_info_t *fuid_infop;
int i;
fuid_infop = zfs_fuid_info_alloc();
fuid_infop->z_domain_cnt = domcnt;
fuid_infop->z_domain_table =
kmem_zalloc(domcnt * sizeof (char *), KM_SLEEP);
2008-11-20 20:01:55 +00:00
for (i = 0; i != idcnt; i++) {
zfs_fuid_t *zfuid;
zfuid = kmem_alloc(sizeof (zfs_fuid_t), KM_SLEEP);
zfuid->z_logfuid = *log_fuid;
zfuid->z_id = -1;
zfuid->z_domidx = 0;
list_insert_tail(&fuid_infop->z_fuids, zfuid);
log_fuid++;
}
zfs_replay_fuid_ugid(fuid_infop, uid, gid);
*end = zfs_replay_fuid_domain_common(fuid_infop, log_fuid, domcnt);
return (fuid_infop);
}
static void
zfs_replay_swap_attrs(lr_attr_t *lrattr)
{
/* swap the lr_attr structure */
byteswap_uint32_array(lrattr, sizeof (*lrattr));
/* swap the bitmap */
byteswap_uint32_array(lrattr + 1, (lrattr->lr_attr_masksize - 1) *
sizeof (uint32_t));
/* swap the attributes, create time + 64 bit word for attributes */
byteswap_uint64_array((caddr_t)(lrattr + 1) + (sizeof (uint32_t) *
(lrattr->lr_attr_masksize - 1)), 3 * sizeof (uint64_t));
}
/*
* Replay file create with optional ACL, xvattr information as well
* as option FUID information.
*/
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_create_acl(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_acl_create_t *lracl = arg2;
2008-11-20 20:01:55 +00:00
char *name = NULL; /* location determined later */
lr_create_t *lr = (lr_create_t *)lracl;
znode_t *dzp;
struct inode *ip = NULL;
2008-11-20 20:01:55 +00:00
xvattr_t xva;
int vflg = 0;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vsecattr_t vsec = { 0 };
2008-11-20 20:01:55 +00:00
lr_attr_t *lrattr;
void *aclstart;
void *fuidstart;
size_t xvatlen = 0;
uint64_t txtype;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
uint64_t objid;
uint64_t dnodesize;
2008-11-20 20:01:55 +00:00
int error;
txtype = (lr->lr_common.lrc_txtype & ~TX_CI);
2008-11-20 20:01:55 +00:00
if (byteswap) {
byteswap_uint64_array(lracl, sizeof (*lracl));
if (txtype == TX_CREATE_ACL_ATTR ||
txtype == TX_MKDIR_ACL_ATTR) {
lrattr = (lr_attr_t *)(caddr_t)(lracl + 1);
zfs_replay_swap_attrs(lrattr);
xvatlen = ZIL_XVAT_SIZE(lrattr->lr_attr_masksize);
}
aclstart = (caddr_t)(lracl + 1) + xvatlen;
zfs_ace_byteswap(aclstart, lracl->lr_acl_bytes, B_FALSE);
/* swap fuids */
if (lracl->lr_fuidcnt) {
byteswap_uint64_array((caddr_t)aclstart +
ZIL_ACE_LENGTH(lracl->lr_acl_bytes),
lracl->lr_fuidcnt * sizeof (uint64_t));
}
}
if ((error = zfs_zget(zfsvfs, lr->lr_doid, &dzp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
objid = LR_FOID_GET_OBJ(lr->lr_foid);
dnodesize = LR_FOID_GET_SLOTS(lr->lr_foid) << DNODE_SHIFT;
2008-11-20 20:01:55 +00:00
xva_init(&xva);
zfs_init_vattr(&xva.xva_vattr, ATTR_MODE | ATTR_UID | ATTR_GID,
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
lr->lr_mode, lr->lr_uid, lr->lr_gid, lr->lr_rdev, objid);
2008-11-20 20:01:55 +00:00
/*
* All forms of zfs create (create, mkdir, mkxattrdir, symlink)
* eventually end up in zfs_mknode(), which assigns the object's
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
* creation time, generation number, and dnode size. The generic
* zfs_create() has no concept of these attributes, so we smuggle
* the values inside the vattr's otherwise unused va_ctime,
* va_nblocks, and va_fsid fields.
2008-11-20 20:01:55 +00:00
*/
ZFS_TIME_DECODE(&xva.xva_vattr.va_ctime, lr->lr_crtime);
xva.xva_vattr.va_nblocks = lr->lr_gen;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
xva.xva_vattr.va_fsid = dnodesize;
2008-11-20 20:01:55 +00:00
error = dnode_try_claim(zfsvfs->z_os, objid, dnodesize >> DNODE_SHIFT);
if (error)
2008-11-20 20:01:55 +00:00
goto bail;
if (lr->lr_common.lrc_txtype & TX_CI)
vflg |= FIGNORECASE;
switch (txtype) {
2008-11-20 20:01:55 +00:00
case TX_CREATE_ACL:
aclstart = (caddr_t)(lracl + 1);
fuidstart = (caddr_t)aclstart +
ZIL_ACE_LENGTH(lracl->lr_acl_bytes);
zfsvfs->z_fuid_replay = zfs_replay_fuids(fuidstart,
2008-11-20 20:01:55 +00:00
(void *)&name, lracl->lr_fuidcnt, lracl->lr_domcnt,
lr->lr_uid, lr->lr_gid);
/*FALLTHROUGH*/
case TX_CREATE_ACL_ATTR:
if (name == NULL) {
lrattr = (lr_attr_t *)(caddr_t)(lracl + 1);
xvatlen = ZIL_XVAT_SIZE(lrattr->lr_attr_masksize);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
xva.xva_vattr.va_mask |= ATTR_XVATTR;
2008-11-20 20:01:55 +00:00
zfs_replay_xvattr(lrattr, &xva);
}
vsec.vsa_mask = VSA_ACE | VSA_ACE_ACLFLAGS;
vsec.vsa_aclentp = (caddr_t)(lracl + 1) + xvatlen;
vsec.vsa_aclcnt = lracl->lr_aclcnt;
vsec.vsa_aclentsz = lracl->lr_acl_bytes;
vsec.vsa_aclflags = lracl->lr_acl_flags;
if (zfsvfs->z_fuid_replay == NULL) {
2008-11-20 20:01:55 +00:00
fuidstart = (caddr_t)(lracl + 1) + xvatlen +
ZIL_ACE_LENGTH(lracl->lr_acl_bytes);
zfsvfs->z_fuid_replay =
2008-11-20 20:01:55 +00:00
zfs_replay_fuids(fuidstart,
(void *)&name, lracl->lr_fuidcnt, lracl->lr_domcnt,
lr->lr_uid, lr->lr_gid);
}
error = zfs_create(ZTOI(dzp), name, &xva.xva_vattr,
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
0, 0, &ip, kcred, vflg, &vsec);
2008-11-20 20:01:55 +00:00
break;
case TX_MKDIR_ACL:
aclstart = (caddr_t)(lracl + 1);
fuidstart = (caddr_t)aclstart +
ZIL_ACE_LENGTH(lracl->lr_acl_bytes);
zfsvfs->z_fuid_replay = zfs_replay_fuids(fuidstart,
2008-11-20 20:01:55 +00:00
(void *)&name, lracl->lr_fuidcnt, lracl->lr_domcnt,
lr->lr_uid, lr->lr_gid);
/*FALLTHROUGH*/
case TX_MKDIR_ACL_ATTR:
if (name == NULL) {
lrattr = (lr_attr_t *)(caddr_t)(lracl + 1);
xvatlen = ZIL_XVAT_SIZE(lrattr->lr_attr_masksize);
zfs_replay_xvattr(lrattr, &xva);
}
vsec.vsa_mask = VSA_ACE | VSA_ACE_ACLFLAGS;
vsec.vsa_aclentp = (caddr_t)(lracl + 1) + xvatlen;
vsec.vsa_aclcnt = lracl->lr_aclcnt;
vsec.vsa_aclentsz = lracl->lr_acl_bytes;
vsec.vsa_aclflags = lracl->lr_acl_flags;
if (zfsvfs->z_fuid_replay == NULL) {
2008-11-20 20:01:55 +00:00
fuidstart = (caddr_t)(lracl + 1) + xvatlen +
ZIL_ACE_LENGTH(lracl->lr_acl_bytes);
zfsvfs->z_fuid_replay =
2008-11-20 20:01:55 +00:00
zfs_replay_fuids(fuidstart,
(void *)&name, lracl->lr_fuidcnt, lracl->lr_domcnt,
lr->lr_uid, lr->lr_gid);
}
error = zfs_mkdir(ZTOI(dzp), name, &xva.xva_vattr,
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
&ip, kcred, vflg, &vsec);
2008-11-20 20:01:55 +00:00
break;
default:
error = SET_ERROR(ENOTSUP);
2008-11-20 20:01:55 +00:00
}
bail:
if (error == 0 && ip != NULL)
iput(ip);
2008-11-20 20:01:55 +00:00
iput(ZTOI(dzp));
2008-11-20 20:01:55 +00:00
if (zfsvfs->z_fuid_replay)
zfs_fuid_info_free(zfsvfs->z_fuid_replay);
zfsvfs->z_fuid_replay = NULL;
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_create(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_create_t *lr = arg2;
2008-11-20 20:01:55 +00:00
char *name = NULL; /* location determined later */
char *link; /* symlink content follows name */
znode_t *dzp;
struct inode *ip = NULL;
2008-11-20 20:01:55 +00:00
xvattr_t xva;
int vflg = 0;
size_t lrsize = sizeof (lr_create_t);
lr_attr_t *lrattr;
void *start;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
size_t xvatlen;
2008-11-20 20:01:55 +00:00
uint64_t txtype;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
uint64_t objid;
uint64_t dnodesize;
2008-11-20 20:01:55 +00:00
int error;
txtype = (lr->lr_common.lrc_txtype & ~TX_CI);
2008-11-20 20:01:55 +00:00
if (byteswap) {
byteswap_uint64_array(lr, sizeof (*lr));
if (txtype == TX_CREATE_ATTR || txtype == TX_MKDIR_ATTR)
zfs_replay_swap_attrs((lr_attr_t *)(lr + 1));
}
if ((error = zfs_zget(zfsvfs, lr->lr_doid, &dzp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
objid = LR_FOID_GET_OBJ(lr->lr_foid);
dnodesize = LR_FOID_GET_SLOTS(lr->lr_foid) << DNODE_SHIFT;
2008-11-20 20:01:55 +00:00
xva_init(&xva);
zfs_init_vattr(&xva.xva_vattr, ATTR_MODE | ATTR_UID | ATTR_GID,
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
lr->lr_mode, lr->lr_uid, lr->lr_gid, lr->lr_rdev, objid);
2008-11-20 20:01:55 +00:00
/*
* All forms of zfs create (create, mkdir, mkxattrdir, symlink)
* eventually end up in zfs_mknode(), which assigns the object's
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
* creation time, generation number, and dnode slot count. The
* generic zfs_create() has no concept of these attributes, so
* we smuggle the values inside the vattr's otherwise unused
* va_ctime, va_nblocks, and va_fsid fields.
2008-11-20 20:01:55 +00:00
*/
ZFS_TIME_DECODE(&xva.xva_vattr.va_ctime, lr->lr_crtime);
xva.xva_vattr.va_nblocks = lr->lr_gen;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
xva.xva_vattr.va_fsid = dnodesize;
2008-11-20 20:01:55 +00:00
error = dnode_try_claim(zfsvfs->z_os, objid, dnodesize >> DNODE_SHIFT);
if (error)
2008-11-20 20:01:55 +00:00
goto out;
if (lr->lr_common.lrc_txtype & TX_CI)
vflg |= FIGNORECASE;
/*
* Symlinks don't have fuid info, and CIFS never creates
* symlinks.
*
* The _ATTR versions will grab the fuid info in their subcases.
*/
if ((int)lr->lr_common.lrc_txtype != TX_SYMLINK &&
(int)lr->lr_common.lrc_txtype != TX_MKDIR_ATTR &&
(int)lr->lr_common.lrc_txtype != TX_CREATE_ATTR) {
start = (lr + 1);
zfsvfs->z_fuid_replay =
2008-11-20 20:01:55 +00:00
zfs_replay_fuid_domain(start, &start,
lr->lr_uid, lr->lr_gid);
}
switch (txtype) {
2008-11-20 20:01:55 +00:00
case TX_CREATE_ATTR:
lrattr = (lr_attr_t *)(caddr_t)(lr + 1);
xvatlen = ZIL_XVAT_SIZE(lrattr->lr_attr_masksize);
zfs_replay_xvattr((lr_attr_t *)((caddr_t)lr + lrsize), &xva);
start = (caddr_t)(lr + 1) + xvatlen;
zfsvfs->z_fuid_replay =
2008-11-20 20:01:55 +00:00
zfs_replay_fuid_domain(start, &start,
lr->lr_uid, lr->lr_gid);
name = (char *)start;
/*FALLTHROUGH*/
case TX_CREATE:
if (name == NULL)
name = (char *)start;
error = zfs_create(ZTOI(dzp), name, &xva.xva_vattr,
0, 0, &ip, kcred, vflg, NULL);
2008-11-20 20:01:55 +00:00
break;
case TX_MKDIR_ATTR:
lrattr = (lr_attr_t *)(caddr_t)(lr + 1);
xvatlen = ZIL_XVAT_SIZE(lrattr->lr_attr_masksize);
zfs_replay_xvattr((lr_attr_t *)((caddr_t)lr + lrsize), &xva);
start = (caddr_t)(lr + 1) + xvatlen;
zfsvfs->z_fuid_replay =
2008-11-20 20:01:55 +00:00
zfs_replay_fuid_domain(start, &start,
lr->lr_uid, lr->lr_gid);
name = (char *)start;
/*FALLTHROUGH*/
case TX_MKDIR:
if (name == NULL)
name = (char *)(lr + 1);
error = zfs_mkdir(ZTOI(dzp), name, &xva.xva_vattr,
&ip, kcred, vflg, NULL);
2008-11-20 20:01:55 +00:00
break;
case TX_MKXATTR:
error = zfs_make_xattrdir(dzp, &xva.xva_vattr, &ip, kcred);
2008-11-20 20:01:55 +00:00
break;
case TX_SYMLINK:
name = (char *)(lr + 1);
link = name + strlen(name) + 1;
error = zfs_symlink(ZTOI(dzp), name, &xva.xva_vattr,
link, &ip, kcred, vflg);
2008-11-20 20:01:55 +00:00
break;
default:
error = SET_ERROR(ENOTSUP);
2008-11-20 20:01:55 +00:00
}
out:
if (error == 0 && ip != NULL)
iput(ip);
2008-11-20 20:01:55 +00:00
iput(ZTOI(dzp));
2008-11-20 20:01:55 +00:00
if (zfsvfs->z_fuid_replay)
zfs_fuid_info_free(zfsvfs->z_fuid_replay);
zfsvfs->z_fuid_replay = NULL;
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_remove(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_remove_t *lr = arg2;
2008-11-20 20:01:55 +00:00
char *name = (char *)(lr + 1); /* name follows lr_remove_t */
znode_t *dzp;
int error;
int vflg = 0;
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
if ((error = zfs_zget(zfsvfs, lr->lr_doid, &dzp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
if (lr->lr_common.lrc_txtype & TX_CI)
vflg |= FIGNORECASE;
switch ((int)lr->lr_common.lrc_txtype) {
case TX_REMOVE:
error = zfs_remove(ZTOI(dzp), name, kcred, vflg);
2008-11-20 20:01:55 +00:00
break;
case TX_RMDIR:
error = zfs_rmdir(ZTOI(dzp), name, NULL, kcred, vflg);
2008-11-20 20:01:55 +00:00
break;
default:
error = SET_ERROR(ENOTSUP);
2008-11-20 20:01:55 +00:00
}
iput(ZTOI(dzp));
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_link(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_link_t *lr = arg2;
2008-11-20 20:01:55 +00:00
char *name = (char *)(lr + 1); /* name follows lr_link_t */
znode_t *dzp, *zp;
int error;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
int vflg = 0;
2008-11-20 20:01:55 +00:00
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
if ((error = zfs_zget(zfsvfs, lr->lr_doid, &dzp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
if ((error = zfs_zget(zfsvfs, lr->lr_link_obj, &zp)) != 0) {
iput(ZTOI(dzp));
2008-11-20 20:01:55 +00:00
return (error);
}
if (lr->lr_common.lrc_txtype & TX_CI)
vflg |= FIGNORECASE;
error = zfs_link(ZTOI(dzp), ZTOI(zp), name, kcred, vflg);
2008-11-20 20:01:55 +00:00
iput(ZTOI(zp));
iput(ZTOI(dzp));
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_rename(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_rename_t *lr = arg2;
2008-11-20 20:01:55 +00:00
char *sname = (char *)(lr + 1); /* sname and tname follow lr_rename_t */
char *tname = sname + strlen(sname) + 1;
znode_t *sdzp, *tdzp;
int error;
int vflg = 0;
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
if ((error = zfs_zget(zfsvfs, lr->lr_sdoid, &sdzp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
if ((error = zfs_zget(zfsvfs, lr->lr_tdoid, &tdzp)) != 0) {
iput(ZTOI(sdzp));
2008-11-20 20:01:55 +00:00
return (error);
}
if (lr->lr_common.lrc_txtype & TX_CI)
vflg |= FIGNORECASE;
error = zfs_rename(ZTOI(sdzp), sname, ZTOI(tdzp), tname, kcred, vflg);
2008-11-20 20:01:55 +00:00
iput(ZTOI(tdzp));
iput(ZTOI(sdzp));
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_write(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_write_t *lr = arg2;
2008-11-20 20:01:55 +00:00
char *data = (char *)(lr + 1); /* data follows lr_write_t */
znode_t *zp;
int error, written;
uint64_t eod, offset, length;
2008-11-20 20:01:55 +00:00
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
if ((error = zfs_zget(zfsvfs, lr->lr_foid, &zp)) != 0) {
2008-11-20 20:01:55 +00:00
/*
* As we can log writes out of order, it's possible the
* file has been removed. In this case just drop the write
* and return success.
*/
if (error == ENOENT)
error = 0;
return (error);
}
offset = lr->lr_offset;
length = lr->lr_length;
eod = offset + length; /* end of data for this write */
/*
* This may be a write from a dmu_sync() for a whole block,
* and may extend beyond the current end of the file.
* We can't just replay what was written for this TX_WRITE as
* a future TX_WRITE2 may extend the eof and the data for that
* write needs to be there. So we write the whole block and
* reduce the eof. This needs to be done within the single dmu
* transaction created within vn_rdwr -> zfs_write. So a possible
* new end of file is passed through in zfsvfs->z_replay_eof
*/
zfsvfs->z_replay_eof = 0; /* 0 means don't change end of file */
/* If it's a dmu_sync() block, write the whole block */
if (lr->lr_common.lrc_reclen == sizeof (lr_write_t)) {
uint64_t blocksize = BP_GET_LSIZE(&lr->lr_blkptr);
if (length < blocksize) {
offset -= offset % blocksize;
length = blocksize;
}
if (zp->z_size < eod)
zfsvfs->z_replay_eof = eod;
}
Linux AIO Support nfsd uses do_readv_writev() to implement fops->read and fops->write. do_readv_writev() will attempt to read/write using fops->aio_read and fops->aio_write, but it will fallback to fops->read and fops->write when AIO is not available. However, the fallback will perform a call for each individual data page. Since our default recordsize is 128KB, sequential operations on NFS will generate 32 DMU transactions where only 1 transaction was needed. That was unnecessary overhead and we implement fops->aio_read and fops->aio_write to eliminate it. ZFS originated in OpenSolaris, where the AIO API is entirely implemented in userland's libc by intelligently mapping them to VOP_WRITE, VOP_READ and VOP_FSYNC. Linux implements AIO inside the kernel itself. Linux filesystems therefore must implement their own AIO logic and nearly all of them implement fops->aio_write synchronously. Consequently, they do not implement aio_fsync(). However, since the ZPL works by mapping Linux's VFS calls to the functions implementing Illumos' VFS operations, we instead implement AIO in the kernel by mapping the operations to the VOP_READ, VOP_WRITE and VOP_FSYNC equivalents. We therefore implement fops->aio_fsync. One might be inclined to make our fops->aio_write implementation synchronous to make software that expects this behavior safe. However, there are several reasons not to do this: 1. Other platforms do not implement aio_write() synchronously and since the majority of userland software using AIO should be cross platform, expectations of synchronous behavior should not be a problem. 2. We would hurt the performance of programs that use POSIX interfaces properly while simultaneously encouraging the creation of more non-compliant software. 3. The broader community concluded that userland software should be patched to properly use POSIX interfaces instead of implementing hacks in filesystems to cater to broken software. This concept is best described as the O_PONIES debate. 4. Making an asynchronous write synchronous is non sequitur. Any software dependent on synchronous aio_write behavior will suffer data loss on ZFSOnLinux in a kernel panic / system failure of at most zfs_txg_timeout seconds, which by default is 5 seconds. This seems like a reasonable consequence of using non-compliant software. It should be noted that this is also a problem in the kernel itself where nfsd does not pass O_SYNC on files opened with it and instead relies on a open()/write()/close() to enforce synchronous behavior when the flush is only guarenteed on last close. Exporting any filesystem that does not implement AIO via NFS risks data loss in the event of a kernel panic / system failure when something else is also accessing the file. Exporting any file system that implements AIO the way this patch does bears similar risk. However, it seems reasonable to forgo crippling our AIO implementation in favor of developing patches to fix this problem in Linux's nfsd for the reasons stated earlier. In the interim, the risk will remain. Failing to implement AIO will not change the problem that nfsd created, so there is no reason for nfsd's mistake to block our implementation of AIO. It also should be noted that `aio_cancel()` will always return `AIO_NOTCANCELED` under this implementation. It is possible to implement aio_cancel by deferring work to taskqs and use `kiocb_set_cancel_fn()` to set a callback function for cancelling work sent to taskqs, but the simpler approach is allowed by the specification: ``` Which operations are cancelable is implementation-defined. ``` http://pubs.opengroup.org/onlinepubs/009695399/functions/aio_cancel.html The only programs on my system that are capable of using `aio_cancel()` are QEMU, beecrypt and fio use it according to a recursive grep of my system's `/usr/src/debug`. That suggests that `aio_cancel()` users are rare. Implementing aio_cancel() is left to a future date when it is clear that there are consumers that benefit from its implementation to justify the work. Lastly, it is important to know that handling of the iovec updates differs between Illumos and Linux in the implementation of read/write. On Linux, it is the VFS' responsibility whle on Illumos, it is the filesystem's responsibility. We take the intermediate solution of copying the iovec so that the ZFS code can update it like on Solaris while leaving the originals alone. This imposes some overhead. We could always revisit this should profiling show that the allocations are a problem. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #223 Closes #2373
2014-08-04 11:09:32 +00:00
written = zpl_write_common(ZTOI(zp), data, length, &offset,
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
UIO_SYSSPACE, 0, kcred);
if (written < 0)
error = -written;
else if (written < length)
error = SET_ERROR(EIO); /* short write */
iput(ZTOI(zp));
zfsvfs->z_replay_eof = 0; /* safety */
return (error);
}
/*
* TX_WRITE2 are only generated when dmu_sync() returns EALREADY
* meaning the pool block is already being synced. So now that we always write
* out full blocks, all we have to do is expand the eof if
* the file is grown.
*/
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_write2(void *arg1, void *arg2, boolean_t byteswap)
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_write_t *lr = arg2;
znode_t *zp;
int error;
uint64_t end;
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
if ((error = zfs_zget(zfsvfs, lr->lr_foid, &zp)) != 0)
return (error);
top:
end = lr->lr_offset + lr->lr_length;
if (end > zp->z_size) {
dmu_tx_t *tx = dmu_tx_create(zfsvfs->z_os);
zp->z_size = end;
dmu_tx_hold_sa(tx, zp->z_sa_hdl, B_FALSE);
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
iput(ZTOI(zp));
if (error == ERESTART) {
dmu_tx_wait(tx);
dmu_tx_abort(tx);
goto top;
}
dmu_tx_abort(tx);
return (error);
}
(void) sa_update(zp->z_sa_hdl, SA_ZPL_SIZE(zfsvfs),
(void *)&zp->z_size, sizeof (uint64_t), tx);
/* Ensure the replayed seq is updated */
(void) zil_replaying(zfsvfs->z_log, tx);
dmu_tx_commit(tx);
}
2008-11-20 20:01:55 +00:00
iput(ZTOI(zp));
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_truncate(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_truncate_t *lr = arg2;
2008-11-20 20:01:55 +00:00
znode_t *zp;
flock64_t fl;
int error;
if (byteswap)
byteswap_uint64_array(lr, sizeof (*lr));
if ((error = zfs_zget(zfsvfs, lr->lr_foid, &zp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
bzero(&fl, sizeof (fl));
fl.l_type = F_WRLCK;
fl.l_whence = SEEK_SET;
2008-11-20 20:01:55 +00:00
fl.l_start = lr->lr_offset;
fl.l_len = lr->lr_length;
error = zfs_space(ZTOI(zp), F_FREESP, &fl, FWRITE | FOFFMAX,
lr->lr_offset, kcred);
2008-11-20 20:01:55 +00:00
iput(ZTOI(zp));
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_setattr(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_setattr_t *lr = arg2;
2008-11-20 20:01:55 +00:00
znode_t *zp;
xvattr_t xva;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vattr_t *vap = &xva.xva_vattr;
2008-11-20 20:01:55 +00:00
int error;
void *start;
xva_init(&xva);
if (byteswap) {
byteswap_uint64_array(lr, sizeof (*lr));
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if ((lr->lr_mask & ATTR_XVATTR) &&
zfsvfs->z_version >= ZPL_VERSION_INITIAL)
2008-11-20 20:01:55 +00:00
zfs_replay_swap_attrs((lr_attr_t *)(lr + 1));
}
if ((error = zfs_zget(zfsvfs, lr->lr_foid, &zp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
zfs_init_vattr(vap, lr->lr_mask, lr->lr_mode,
lr->lr_uid, lr->lr_gid, 0, lr->lr_foid);
2008-11-20 20:01:55 +00:00
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vap->va_size = lr->lr_size;
ZFS_TIME_DECODE(&vap->va_atime, lr->lr_atime);
ZFS_TIME_DECODE(&vap->va_mtime, lr->lr_mtime);
gethrestime(&vap->va_ctime);
vap->va_mask |= ATTR_CTIME;
2008-11-20 20:01:55 +00:00
/*
* Fill in xvattr_t portions if necessary.
*/
start = (lr_setattr_t *)(lr + 1);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
if (vap->va_mask & ATTR_XVATTR) {
2008-11-20 20:01:55 +00:00
zfs_replay_xvattr((lr_attr_t *)start, &xva);
start = (caddr_t)start +
ZIL_XVAT_SIZE(((lr_attr_t *)start)->lr_attr_masksize);
} else
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
xva.xva_vattr.va_mask &= ~ATTR_XVATTR;
2008-11-20 20:01:55 +00:00
zfsvfs->z_fuid_replay = zfs_replay_fuid_domain(start, &start,
2008-11-20 20:01:55 +00:00
lr->lr_uid, lr->lr_gid);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
error = zfs_setattr(ZTOI(zp), vap, 0, kcred);
2008-11-20 20:01:55 +00:00
zfs_fuid_info_free(zfsvfs->z_fuid_replay);
zfsvfs->z_fuid_replay = NULL;
iput(ZTOI(zp));
2008-11-20 20:01:55 +00:00
return (error);
}
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_acl_v0(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_acl_v0_t *lr = arg2;
2008-11-20 20:01:55 +00:00
ace_t *ace = (ace_t *)(lr + 1); /* ace array follows lr_acl_t */
vsecattr_t vsa;
znode_t *zp;
int error;
if (byteswap) {
byteswap_uint64_array(lr, sizeof (*lr));
zfs_oldace_byteswap(ace, lr->lr_aclcnt);
}
if ((error = zfs_zget(zfsvfs, lr->lr_foid, &zp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
bzero(&vsa, sizeof (vsa));
vsa.vsa_mask = VSA_ACE | VSA_ACECNT;
vsa.vsa_aclcnt = lr->lr_aclcnt;
vsa.vsa_aclentsz = sizeof (ace_t) * vsa.vsa_aclcnt;
vsa.vsa_aclflags = 0;
2008-11-20 20:01:55 +00:00
vsa.vsa_aclentp = ace;
error = zfs_setsecattr(ZTOI(zp), &vsa, 0, kcred);
2008-11-20 20:01:55 +00:00
iput(ZTOI(zp));
2008-11-20 20:01:55 +00:00
return (error);
}
/*
* Replaying ACLs is complicated by FUID support.
* The log record may contain some optional data
* to be used for replaying FUID's. These pieces
* are the actual FUIDs that were created initially.
* The FUID table index may no longer be valid and
* during zfs_create() a new index may be assigned.
* Because of this the log will contain the original
* domain+rid in order to create a new FUID.
2008-11-20 20:01:55 +00:00
*
* The individual ACEs may contain an ephemeral uid/gid which is no
* longer valid and will need to be replaced with an actual FUID.
*
*/
static int
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfs_replay_acl(void *arg1, void *arg2, boolean_t byteswap)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zfsvfs_t *zfsvfs = arg1;
lr_acl_t *lr = arg2;
2008-11-20 20:01:55 +00:00
ace_t *ace = (ace_t *)(lr + 1);
vsecattr_t vsa;
znode_t *zp;
int error;
if (byteswap) {
byteswap_uint64_array(lr, sizeof (*lr));
zfs_ace_byteswap(ace, lr->lr_acl_bytes, B_FALSE);
if (lr->lr_fuidcnt) {
byteswap_uint64_array((caddr_t)ace +
ZIL_ACE_LENGTH(lr->lr_acl_bytes),
lr->lr_fuidcnt * sizeof (uint64_t));
}
}
if ((error = zfs_zget(zfsvfs, lr->lr_foid, &zp)) != 0)
2008-11-20 20:01:55 +00:00
return (error);
bzero(&vsa, sizeof (vsa));
vsa.vsa_mask = VSA_ACE | VSA_ACECNT | VSA_ACE_ACLFLAGS;
vsa.vsa_aclcnt = lr->lr_aclcnt;
vsa.vsa_aclentp = ace;
vsa.vsa_aclentsz = lr->lr_acl_bytes;
vsa.vsa_aclflags = lr->lr_acl_flags;
if (lr->lr_fuidcnt) {
void *fuidstart = (caddr_t)ace +
ZIL_ACE_LENGTH(lr->lr_acl_bytes);
zfsvfs->z_fuid_replay =
2008-11-20 20:01:55 +00:00
zfs_replay_fuids(fuidstart, &fuidstart,
lr->lr_fuidcnt, lr->lr_domcnt, 0, 0);
}
error = zfs_setsecattr(ZTOI(zp), &vsa, 0, kcred);
2008-11-20 20:01:55 +00:00
if (zfsvfs->z_fuid_replay)
zfs_fuid_info_free(zfsvfs->z_fuid_replay);
2008-11-20 20:01:55 +00:00
zfsvfs->z_fuid_replay = NULL;
iput(ZTOI(zp));
2008-11-20 20:01:55 +00:00
return (error);
}
/*
* Callback vectors for replaying records
*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zil_replay_func_t *zfs_replay_vector[TX_MAX_TYPE] = {
zfs_replay_error, /* no such type */
zfs_replay_create, /* TX_CREATE */
zfs_replay_create, /* TX_MKDIR */
zfs_replay_create, /* TX_MKXATTR */
zfs_replay_create, /* TX_SYMLINK */
zfs_replay_remove, /* TX_REMOVE */
zfs_replay_remove, /* TX_RMDIR */
zfs_replay_link, /* TX_LINK */
zfs_replay_rename, /* TX_RENAME */
zfs_replay_write, /* TX_WRITE */
zfs_replay_truncate, /* TX_TRUNCATE */
zfs_replay_setattr, /* TX_SETATTR */
zfs_replay_acl_v0, /* TX_ACL_V0 */
zfs_replay_acl, /* TX_ACL */
zfs_replay_create_acl, /* TX_CREATE_ACL */
zfs_replay_create, /* TX_CREATE_ATTR */
zfs_replay_create_acl, /* TX_CREATE_ACL_ATTR */
zfs_replay_create_acl, /* TX_MKDIR_ACL */
zfs_replay_create, /* TX_MKDIR_ATTR */
zfs_replay_create_acl, /* TX_MKDIR_ACL_ATTR */
zfs_replay_write2, /* TX_WRITE2 */
2008-11-20 20:01:55 +00:00
};