freebsd-nq/sys/x86/xen/pv.c

413 lines
11 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004 Christian Limpach.
* Copyright (c) 2004-2006,2008 Kip Macy
* Copyright (c) 2008 The NetBSD Foundation, Inc.
* Copyright (c) 2013 Roger Pau Monné <roger.pau@citrix.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/reboot.h>
#include <sys/systm.h>
#include <sys/malloc.h>
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
#include <sys/linker.h>
#include <sys/lock.h>
#include <sys/rwlock.h>
#include <sys/boot.h>
#include <sys/ctype.h>
#include <sys/mutex.h>
#include <sys/smp.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/vm_kern.h>
#include <vm/vm_page.h>
#include <vm/vm_map.h>
#include <vm/vm_object.h>
#include <vm/vm_pager.h>
#include <vm/vm_param.h>
#include <machine/intr_machdep.h>
#include <x86/apicvar.h>
#include <x86/init.h>
#include <machine/pc/bios.h>
#include <machine/smp.h>
msi: add Xen MSI implementation This patch adds support for MSI interrupts when running on Xen. Apart from adding the Xen related code needed in order to register MSI interrupts this patch also makes the msi_init function a hook in init_ops, so different MSI implementations can have different initialization functions. Sponsored by: Citrix Systems R&D xen/interface/physdev.h: - Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen public interface. x86/include/init.h: - Add a hook for setting custom msi_init methods. amd64/amd64/machdep.c: i386/i386/machdep.c: - Set the default msi_init hook to point to the native MSI initialization method. x86/xen/pv.c: - Set the Xen MSI init hook when running as a Xen guest. x86/x86/local_apic.c: - Call the msi_init hook instead of directly calling msi_init. xen/xen_intr.h: x86/xen/xen_intr.c: - Introduce support for registering/releasing MSI interrupts with Xen. - The MSI interrupts will use the same PIC as the IO APIC interrupts. xen/xen_msi.h: x86/xen/xen_msi.c: - Introduce a Xen MSI implementation. x86/xen/xen_nexus.c: - Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI implementation. x86/xen/xen_pci.c: - Introduce a Xen specific PCI bus that inherits from the ACPI PCI bus and overwrites the native MSI methods. - This is needed because when running under Xen the MSI messages used to configure MSI interrupts on PCI devices are written by Xen itself. dev/acpica/acpi_pci.c: - Lower the quality of the ACPI PCI bus so the newly introduced Xen PCI bus can take over when needed. conf/files.i386: conf/files.amd64: - Add the newly created files to the build process.
2014-09-30 16:46:45 +00:00
#include <machine/intr_machdep.h>
#include <xen/xen-os.h>
#include <xen/hypervisor.h>
#include <xen/xenstore/xenstorevar.h>
#include <xen/xen_pv.h>
msi: add Xen MSI implementation This patch adds support for MSI interrupts when running on Xen. Apart from adding the Xen related code needed in order to register MSI interrupts this patch also makes the msi_init function a hook in init_ops, so different MSI implementations can have different initialization functions. Sponsored by: Citrix Systems R&D xen/interface/physdev.h: - Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen public interface. x86/include/init.h: - Add a hook for setting custom msi_init methods. amd64/amd64/machdep.c: i386/i386/machdep.c: - Set the default msi_init hook to point to the native MSI initialization method. x86/xen/pv.c: - Set the Xen MSI init hook when running as a Xen guest. x86/x86/local_apic.c: - Call the msi_init hook instead of directly calling msi_init. xen/xen_intr.h: x86/xen/xen_intr.c: - Introduce support for registering/releasing MSI interrupts with Xen. - The MSI interrupts will use the same PIC as the IO APIC interrupts. xen/xen_msi.h: x86/xen/xen_msi.c: - Introduce a Xen MSI implementation. x86/xen/xen_nexus.c: - Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI implementation. x86/xen/xen_pci.c: - Introduce a Xen specific PCI bus that inherits from the ACPI PCI bus and overwrites the native MSI methods. - This is needed because when running under Xen the MSI messages used to configure MSI interrupts on PCI devices are written by Xen itself. dev/acpica/acpi_pci.c: - Lower the quality of the ACPI PCI bus so the newly introduced Xen PCI bus can take over when needed. conf/files.i386: conf/files.amd64: - Add the newly created files to the build process.
2014-09-30 16:46:45 +00:00
#include <xen/xen_msi.h>
#include <xen/interface/vcpu.h>
#include <dev/xen/timer/timer.h>
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
#ifdef DDB
#include <ddb/ddb.h>
#endif
/* Native initial function */
extern u_int64_t hammer_time(u_int64_t, u_int64_t);
/* Xen initial function */
uint64_t hammer_time_xen(start_info_t *, uint64_t);
#define MAX_E820_ENTRIES 128
/*--------------------------- Forward Declarations ---------------------------*/
static caddr_t xen_pv_parse_preload_data(u_int64_t);
static void xen_pv_parse_memmap(caddr_t, vm_paddr_t *, int *);
#ifdef SMP
static int xen_pv_start_all_aps(void);
#endif
/*---------------------------- Extern Declarations ---------------------------*/
#ifdef SMP
/* Variables used by amd64 mp_machdep to start APs */
extern struct mtx ap_boot_mtx;
extern void *bootstacks[];
extern char *doublefault_stack;
extern char *nmi_stack;
extern void *dpcpu;
extern int bootAP;
extern char *bootSTK;
#endif
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
/*
* Placed by the linker at the end of the bss section, which is the last
* section loaded by Xen before loading the symtab and strtab.
*/
extern uint32_t end;
/*-------------------------------- Global Data -------------------------------*/
/* Xen init_ops implementation. */
struct init_ops xen_init_ops = {
.parse_preload_data = xen_pv_parse_preload_data,
.early_clock_source_init = xen_clock_init,
.early_delay = xen_delay,
.parse_memmap = xen_pv_parse_memmap,
#ifdef SMP
.start_all_aps = xen_pv_start_all_aps,
#endif
msi: add Xen MSI implementation This patch adds support for MSI interrupts when running on Xen. Apart from adding the Xen related code needed in order to register MSI interrupts this patch also makes the msi_init function a hook in init_ops, so different MSI implementations can have different initialization functions. Sponsored by: Citrix Systems R&D xen/interface/physdev.h: - Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen public interface. x86/include/init.h: - Add a hook for setting custom msi_init methods. amd64/amd64/machdep.c: i386/i386/machdep.c: - Set the default msi_init hook to point to the native MSI initialization method. x86/xen/pv.c: - Set the Xen MSI init hook when running as a Xen guest. x86/x86/local_apic.c: - Call the msi_init hook instead of directly calling msi_init. xen/xen_intr.h: x86/xen/xen_intr.c: - Introduce support for registering/releasing MSI interrupts with Xen. - The MSI interrupts will use the same PIC as the IO APIC interrupts. xen/xen_msi.h: x86/xen/xen_msi.c: - Introduce a Xen MSI implementation. x86/xen/xen_nexus.c: - Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI implementation. x86/xen/xen_pci.c: - Introduce a Xen specific PCI bus that inherits from the ACPI PCI bus and overwrites the native MSI methods. - This is needed because when running under Xen the MSI messages used to configure MSI interrupts on PCI devices are written by Xen itself. dev/acpica/acpi_pci.c: - Lower the quality of the ACPI PCI bus so the newly introduced Xen PCI bus can take over when needed. conf/files.i386: conf/files.amd64: - Add the newly created files to the build process.
2014-09-30 16:46:45 +00:00
.msi_init = xen_msi_init,
};
static struct bios_smap xen_smap[MAX_E820_ENTRIES];
/*-------------------------------- Xen PV init -------------------------------*/
/*
* First function called by the Xen PVH boot sequence.
*
* Set some Xen global variables and prepare the environment so it is
* as similar as possible to what native FreeBSD init function expects.
*/
uint64_t
hammer_time_xen(start_info_t *si, uint64_t xenstack)
{
uint64_t physfree;
uint64_t *PT4 = (u_int64_t *)xenstack;
uint64_t *PT3 = (u_int64_t *)(xenstack + PAGE_SIZE);
uint64_t *PT2 = (u_int64_t *)(xenstack + 2 * PAGE_SIZE);
int i;
xen_domain_type = XEN_PV_DOMAIN;
vm_guest = VM_GUEST_XEN;
if ((si == NULL) || (xenstack == 0)) {
xc_printf("ERROR: invalid start_info or xen stack, halting\n");
HYPERVISOR_shutdown(SHUTDOWN_crash);
}
xc_printf("FreeBSD PVH running on %s\n", si->magic);
/* We use 3 pages of xen stack for the boot pagetables */
physfree = xenstack + 3 * PAGE_SIZE - KERNBASE;
/* Setup Xen global variables */
HYPERVISOR_start_info = si;
HYPERVISOR_shared_info =
(shared_info_t *)(si->shared_info + KERNBASE);
/*
* Setup some misc global variables for Xen devices
*
* XXX: Devices that need these specific variables should
* be rewritten to fetch this info by themselves from the
* start_info page.
*/
xen_store = (struct xenstore_domain_interface *)
(ptoa(si->store_mfn) + KERNBASE);
console_page = (char *)(ptoa(si->console.domU.mfn) + KERNBASE);
/*
* Use the stack Xen gives us to build the page tables
* as native FreeBSD expects to find them (created
* by the boot trampoline).
*/
for (i = 0; i < (PAGE_SIZE / sizeof(uint64_t)); i++) {
/*
* Each slot of the level 4 pages points
* to the same level 3 page
*/
PT4[i] = ((uint64_t)&PT3[0]) - KERNBASE;
PT4[i] |= PG_V | PG_RW | PG_U;
/*
* Each slot of the level 3 pages points
* to the same level 2 page
*/
PT3[i] = ((uint64_t)&PT2[0]) - KERNBASE;
PT3[i] |= PG_V | PG_RW | PG_U;
/*
* The level 2 page slots are mapped with
* 2MB pages for 1GB.
*/
PT2[i] = i * (2 * 1024 * 1024);
PT2[i] |= PG_V | PG_RW | PG_PS | PG_U;
}
load_cr3(((uint64_t)&PT4[0]) - KERNBASE);
/* Set the hooks for early functions that diverge from bare metal */
init_ops = xen_init_ops;
apic_ops = xen_apic_ops;
/* Now we can jump into the native init function */
return (hammer_time(0, physfree));
}
/*-------------------------------- PV specific -------------------------------*/
#ifdef SMP
static bool
start_xen_ap(int cpu)
{
struct vcpu_guest_context *ctxt;
int ms, cpus = mp_naps;
const size_t stacksize = KSTACK_PAGES * PAGE_SIZE;
/* allocate and set up an idle stack data page */
bootstacks[cpu] =
(void *)kmem_malloc(kernel_arena, stacksize, M_WAITOK | M_ZERO);
doublefault_stack =
(char *)kmem_malloc(kernel_arena, PAGE_SIZE, M_WAITOK | M_ZERO);
nmi_stack =
(char *)kmem_malloc(kernel_arena, PAGE_SIZE, M_WAITOK | M_ZERO);
dpcpu =
(void *)kmem_malloc(kernel_arena, DPCPU_SIZE, M_WAITOK | M_ZERO);
bootSTK = (char *)bootstacks[cpu] + KSTACK_PAGES * PAGE_SIZE - 8;
bootAP = cpu;
ctxt = malloc(sizeof(*ctxt), M_TEMP, M_WAITOK | M_ZERO);
if (ctxt == NULL)
panic("unable to allocate memory");
ctxt->flags = VGCF_IN_KERNEL;
ctxt->user_regs.rip = (unsigned long) init_secondary;
ctxt->user_regs.rsp = (unsigned long) bootSTK;
/* Set the AP to use the same page tables */
ctxt->ctrlreg[3] = KPML4phys;
if (HYPERVISOR_vcpu_op(VCPUOP_initialise, cpu, ctxt))
panic("unable to initialize AP#%d", cpu);
free(ctxt, M_TEMP);
/* Launch the vCPU */
if (HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
panic("unable to start AP#%d", cpu);
/* Wait up to 5 seconds for it to start. */
for (ms = 0; ms < 5000; ms++) {
if (mp_naps > cpus)
return (true);
DELAY(1000);
}
return (false);
}
static int
xen_pv_start_all_aps(void)
{
int cpu;
mtx_init(&ap_boot_mtx, "ap boot", NULL, MTX_SPIN);
for (cpu = 1; cpu < mp_ncpus; cpu++) {
/* attempt to start the Application Processor */
if (!start_xen_ap(cpu))
panic("AP #%d failed to start!", cpu);
CPU_SET(cpu, &all_cpus); /* record AP in CPU map */
}
return (mp_naps);
}
#endif /* SMP */
/*
* Functions to convert the "extra" parameters passed by Xen
* into FreeBSD boot options.
*/
static void
xen_pv_set_env(void)
{
char *cmd_line_next, *cmd_line;
size_t env_size;
cmd_line = HYPERVISOR_start_info->cmd_line;
env_size = sizeof(HYPERVISOR_start_info->cmd_line);
/* Skip leading spaces */
for (; isspace(*cmd_line) && (env_size != 0); cmd_line++)
env_size--;
/* Replace ',' with '\0' */
for (cmd_line_next = cmd_line; strsep(&cmd_line_next, ",") != NULL;)
;
init_static_kenv(cmd_line, env_size);
}
static void
xen_pv_set_boothowto(void)
{
int i;
char *env;
/* get equivalents from the environment */
for (i = 0; howto_names[i].ev != NULL; i++) {
if ((env = kern_getenv(howto_names[i].ev)) != NULL) {
boothowto |= howto_names[i].mask;
freeenv(env);
}
}
}
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
#ifdef DDB
/*
* The way Xen loads the symtab is different from the native boot loader,
* because it's tailored for NetBSD. So we have to adapt and use the same
* method as NetBSD. Portions of the code below have been picked from NetBSD:
* sys/kern/kern_ksyms.c CVS Revision 1.71.
*/
static void
xen_pv_parse_symtab(void)
{
Elf_Ehdr *ehdr;
Elf_Shdr *shdr;
vm_offset_t sym_end;
uint32_t size;
int i, j;
size = end;
sym_end = HYPERVISOR_start_info->mod_start != 0 ?
HYPERVISOR_start_info->mod_start :
HYPERVISOR_start_info->mfn_list;
/*
* Make sure the size is right headed, sym_end is just a
* high boundary, but at least allows us to fail earlier.
*/
if ((vm_offset_t)&end + size > sym_end) {
xc_printf("Unable to load ELF symtab: size mismatch\n");
return;
}
ehdr = (Elf_Ehdr *)(&end + 1);
if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) ||
ehdr->e_ident[EI_CLASS] != ELF_TARG_CLASS ||
ehdr->e_version > 1) {
xc_printf("Unable to load ELF symtab: invalid symbol table\n");
return;
}
shdr = (Elf_Shdr *)((uint8_t *)ehdr + ehdr->e_shoff);
/* Find the symbol table and the corresponding string table. */
for (i = 1; i < ehdr->e_shnum; i++) {
if (shdr[i].sh_type != SHT_SYMTAB)
continue;
if (shdr[i].sh_offset == 0)
continue;
ksymtab = (uintptr_t)((uint8_t *)ehdr + shdr[i].sh_offset);
ksymtab_size = shdr[i].sh_size;
j = shdr[i].sh_link;
if (shdr[j].sh_offset == 0)
continue; /* Can this happen? */
kstrtab = (uintptr_t)((uint8_t *)ehdr + shdr[j].sh_offset);
break;
}
if (ksymtab == 0 || kstrtab == 0) {
xc_printf(
"Unable to load ELF symtab: could not find symtab or strtab\n");
return;
}
}
#endif
static caddr_t
xen_pv_parse_preload_data(u_int64_t modulep)
{
/* Parse the extra boot information given by Xen */
xen_pv_set_env();
xen_pv_set_boothowto();
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
#ifdef DDB
xen_pv_parse_symtab();
#endif
return (NULL);
}
static void
xen_pv_parse_memmap(caddr_t kmdp, vm_paddr_t *physmap, int *physmap_idx)
{
struct xen_memory_map memmap;
u_int32_t size;
int rc;
/* Fetch the E820 map from Xen */
memmap.nr_entries = MAX_E820_ENTRIES;
set_xen_guest_handle(memmap.buffer, xen_smap);
rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap);
if (rc)
panic("unable to fetch Xen E820 memory map");
size = memmap.nr_entries * sizeof(xen_smap[0]);
bios_add_smap_entries(xen_smap, size, physmap, physmap_idx);
}