Merge helper fib* functions used for basic lookups.
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
2015-12-08 10:50:03 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2015
|
|
|
|
* Alexander V. Chernikov <melifaro@FreeBSD.org>
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
2017-02-28 23:42:47 +00:00
|
|
|
* 3. Neither the name of the University nor the names of its contributors
|
Merge helper fib* functions used for basic lookups.
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
2015-12-08 10:50:03 +00:00
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
#include "opt_inet.h"
|
|
|
|
#include "opt_inet6.h"
|
|
|
|
#include "opt_route.h"
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/lock.h>
|
2018-06-16 08:26:23 +00:00
|
|
|
#include <sys/rmlock.h>
|
Merge helper fib* functions used for basic lookups.
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
2015-12-08 10:50:03 +00:00
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_var.h>
|
|
|
|
#include <net/if_dl.h>
|
|
|
|
#include <net/route.h>
|
2020-10-03 10:47:17 +00:00
|
|
|
#include <net/route/route_ctl.h>
|
2020-04-28 19:14:09 +00:00
|
|
|
#include <net/route/route_var.h>
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
#include <net/route/fib_algo.h>
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
#include <net/route/nhop.h>
|
2020-10-18 17:15:47 +00:00
|
|
|
#include <net/toeplitz.h>
|
Merge helper fib* functions used for basic lookups.
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
2015-12-08 10:50:03 +00:00
|
|
|
#include <net/vnet.h>
|
|
|
|
|
|
|
|
#include <netinet/in.h>
|
|
|
|
#include <netinet/in_var.h>
|
|
|
|
#include <netinet/ip_mroute.h>
|
|
|
|
#include <netinet/ip6.h>
|
|
|
|
#include <netinet6/in6_fib.h>
|
|
|
|
#include <netinet6/in6_var.h>
|
|
|
|
#include <netinet6/nd6.h>
|
|
|
|
#include <netinet6/scope6_var.h>
|
|
|
|
|
|
|
|
#include <net/if_types.h>
|
|
|
|
|
|
|
|
#ifdef INET6
|
2020-03-03 09:50:33 +00:00
|
|
|
|
2020-01-21 12:00:34 +00:00
|
|
|
CHK_STRUCT_ROUTE_COMPAT(struct route_in6, ro_dst);
|
|
|
|
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
#ifdef FIB_ALGO
|
|
|
|
VNET_DEFINE(struct fib_dp *, inet6_dp);
|
|
|
|
#endif
|
|
|
|
|
2020-10-18 17:15:47 +00:00
|
|
|
#ifdef ROUTE_MPATH
|
|
|
|
struct _hash_5tuple_ipv6 {
|
|
|
|
struct in6_addr src;
|
|
|
|
struct in6_addr dst;
|
|
|
|
unsigned short src_port;
|
|
|
|
unsigned short dst_port;
|
|
|
|
char proto;
|
|
|
|
char spare[3];
|
|
|
|
};
|
|
|
|
_Static_assert(sizeof(struct _hash_5tuple_ipv6) == 40,
|
|
|
|
"_hash_5tuple_ipv6 size is wrong");
|
|
|
|
|
|
|
|
uint32_t
|
|
|
|
fib6_calc_software_hash(const struct in6_addr *src, const struct in6_addr *dst,
|
|
|
|
unsigned short src_port, unsigned short dst_port, char proto,
|
|
|
|
uint32_t *phashtype)
|
|
|
|
{
|
|
|
|
struct _hash_5tuple_ipv6 data;
|
|
|
|
|
|
|
|
data.src = *src;
|
|
|
|
data.dst = *dst;
|
|
|
|
data.src_port = src_port;
|
|
|
|
data.dst_port = dst_port;
|
|
|
|
data.proto = proto;
|
|
|
|
data.spare[0] = data.spare[1] = data.spare[2] = 0;
|
|
|
|
|
|
|
|
*phashtype = M_HASHTYPE_OPAQUE_HASH;
|
|
|
|
|
|
|
|
return (toeplitz_hash(MPATH_ENTROPY_KEY_LEN, mpath_entropy_key,
|
|
|
|
sizeof(data), (uint8_t *)&data));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
/*
|
|
|
|
* Looks up path in fib @fibnum specified by @dst.
|
|
|
|
* Assumes scope is deembedded and provided in @scopeid.
|
|
|
|
*
|
|
|
|
* Returns path nexthop on success. Nexthop is safe to use
|
|
|
|
* within the current network epoch. If longer lifetime is required,
|
|
|
|
* one needs to pass NHR_REF as a flag. This will return referenced
|
|
|
|
* nexthop.
|
|
|
|
*/
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
#ifdef FIB_ALGO
|
|
|
|
struct nhop_object *
|
|
|
|
fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
|
|
|
|
uint32_t scopeid, uint32_t flags, uint32_t flowid)
|
|
|
|
{
|
|
|
|
struct nhop_object *nh;
|
|
|
|
struct fib_dp *dp = &V_inet6_dp[fibnum];
|
|
|
|
struct flm_lookup_key key = {.addr6 = dst6 };
|
|
|
|
|
|
|
|
nh = dp->f(dp->arg, key, scopeid);
|
|
|
|
if (nh != NULL) {
|
|
|
|
nh = nhop_select(nh, flowid);
|
|
|
|
/* Ensure route & ifp is UP */
|
|
|
|
if (RT_LINK_IS_UP(nh->nh_ifp)) {
|
|
|
|
if (flags & NHR_REF)
|
|
|
|
nhop_ref_object(nh);
|
|
|
|
return (nh);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
RTSTAT_INC(rts_unreach);
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
#else
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
struct nhop_object *
|
|
|
|
fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
|
|
|
|
uint32_t scopeid, uint32_t flags, uint32_t flowid)
|
|
|
|
{
|
|
|
|
RIB_RLOCK_TRACKER;
|
|
|
|
struct rib_head *rh;
|
|
|
|
struct radix_node *rn;
|
|
|
|
struct nhop_object *nh;
|
|
|
|
|
|
|
|
KASSERT((fibnum < rt_numfibs), ("fib6_lookup: bad fibnum"));
|
|
|
|
rh = rt_tables_get_rnh(fibnum, AF_INET6);
|
|
|
|
if (rh == NULL)
|
|
|
|
return (NULL);
|
|
|
|
|
2020-11-29 13:41:49 +00:00
|
|
|
struct sockaddr_in6 sin6 = {
|
|
|
|
.sin6_len = sizeof(struct sockaddr_in6),
|
|
|
|
.sin6_addr = *dst6,
|
|
|
|
};
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
|
|
|
|
/* Assume scopeid is valid and embed it directly */
|
|
|
|
if (IN6_IS_SCOPE_LINKLOCAL(dst6))
|
|
|
|
sin6.sin6_addr.s6_addr16[1] = htons(scopeid & 0xffff);
|
|
|
|
|
|
|
|
RIB_RLOCK(rh);
|
|
|
|
rn = rh->rnh_matchaddr((void *)&sin6, &rh->head);
|
|
|
|
if (rn != NULL && ((rn->rn_flags & RNF_ROOT) == 0)) {
|
2020-10-03 10:47:17 +00:00
|
|
|
nh = nhop_select((RNTORT(rn))->rt_nhop, flowid);
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
/* Ensure route & ifp is UP */
|
|
|
|
if (RT_LINK_IS_UP(nh->nh_ifp)) {
|
|
|
|
if (flags & NHR_REF)
|
|
|
|
nhop_ref_object(nh);
|
|
|
|
RIB_RUNLOCK(rh);
|
|
|
|
return (nh);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
RIB_RUNLOCK(rh);
|
|
|
|
|
|
|
|
RTSTAT_INC(rts_unreach);
|
|
|
|
return (NULL);
|
|
|
|
}
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
#endif
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
|
|
|
|
inline static int
|
2020-10-03 10:47:17 +00:00
|
|
|
check_urpf_nhop(const struct nhop_object *nh, uint32_t flags,
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
const struct ifnet *src_if)
|
|
|
|
{
|
|
|
|
|
|
|
|
if (src_if != NULL && nh->nh_aifp == src_if) {
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
if (src_if == NULL) {
|
|
|
|
if ((flags & NHR_NODEFAULT) == 0)
|
|
|
|
return (1);
|
|
|
|
else if ((nh->nh_flags & NHF_DEFAULT) == 0)
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
2020-10-03 10:47:17 +00:00
|
|
|
static int
|
|
|
|
check_urpf(struct nhop_object *nh, uint32_t flags,
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
const struct ifnet *src_if)
|
|
|
|
{
|
2020-10-03 10:47:17 +00:00
|
|
|
#ifdef ROUTE_MPATH
|
|
|
|
if (NH_IS_NHGRP(nh)) {
|
2022-08-01 10:02:12 +00:00
|
|
|
const struct weightened_nhop *wn;
|
2020-10-03 10:47:17 +00:00
|
|
|
uint32_t num_nhops;
|
|
|
|
wn = nhgrp_get_nhops((struct nhgrp_object *)nh, &num_nhops);
|
|
|
|
for (int i = 0; i < num_nhops; i++) {
|
|
|
|
if (check_urpf_nhop(wn[i].nh, flags, src_if) != 0)
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
} else
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
#endif
|
2020-10-03 10:47:17 +00:00
|
|
|
return (check_urpf_nhop(nh, flags, src_if));
|
|
|
|
}
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
|
2021-01-30 23:24:26 +00:00
|
|
|
#ifndef FIB_ALGO
|
2020-11-29 13:41:49 +00:00
|
|
|
static struct nhop_object *
|
|
|
|
lookup_nhop(uint32_t fibnum, const struct in6_addr *dst6,
|
|
|
|
uint32_t scopeid)
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
{
|
|
|
|
RIB_RLOCK_TRACKER;
|
|
|
|
struct rib_head *rh;
|
|
|
|
struct radix_node *rn;
|
2020-11-29 13:41:49 +00:00
|
|
|
struct nhop_object *nh;
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
|
|
|
|
KASSERT((fibnum < rt_numfibs), ("fib6_check_urpf: bad fibnum"));
|
|
|
|
rh = rt_tables_get_rnh(fibnum, AF_INET6);
|
|
|
|
if (rh == NULL)
|
2020-11-29 13:41:49 +00:00
|
|
|
return (NULL);
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
|
2020-04-19 07:27:12 +00:00
|
|
|
/* Prepare lookup key */
|
2020-11-29 13:41:49 +00:00
|
|
|
struct sockaddr_in6 sin6 = {
|
|
|
|
.sin6_len = sizeof(struct sockaddr_in6),
|
|
|
|
.sin6_addr = *dst6,
|
|
|
|
};
|
2020-04-19 07:27:12 +00:00
|
|
|
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
/* Assume scopeid is valid and embed it directly */
|
|
|
|
if (IN6_IS_SCOPE_LINKLOCAL(dst6))
|
2020-04-19 07:27:12 +00:00
|
|
|
sin6.sin6_addr.s6_addr16[1] = htons(scopeid & 0xffff);
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
|
2020-11-29 13:41:49 +00:00
|
|
|
nh = NULL;
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
RIB_RLOCK(rh);
|
2020-04-19 07:27:12 +00:00
|
|
|
rn = rh->rnh_matchaddr((void *)&sin6, &rh->head);
|
2020-11-29 13:41:49 +00:00
|
|
|
if (rn != NULL && ((rn->rn_flags & RNF_ROOT) == 0))
|
|
|
|
nh = RNTORT(rn)->rt_nhop;
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
RIB_RUNLOCK(rh);
|
|
|
|
|
2020-11-29 13:41:49 +00:00
|
|
|
return (nh);
|
|
|
|
}
|
2021-01-30 23:24:26 +00:00
|
|
|
#endif
|
2020-11-29 13:41:49 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Performs reverse path forwarding lookup.
|
|
|
|
* If @src_if is non-zero, verifies that at least 1 path goes via
|
|
|
|
* this interface.
|
|
|
|
* If @src_if is zero, verifies that route exist.
|
|
|
|
* if @flags contains NHR_NOTDEFAULT, do not consider default route.
|
|
|
|
*
|
|
|
|
* Returns 1 if route matching conditions is found, 0 otherwise.
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
fib6_check_urpf(uint32_t fibnum, const struct in6_addr *dst6,
|
|
|
|
uint32_t scopeid, uint32_t flags, const struct ifnet *src_if)
|
|
|
|
{
|
|
|
|
struct nhop_object *nh;
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
#ifdef FIB_ALGO
|
|
|
|
struct fib_dp *dp = &V_inet6_dp[fibnum];
|
|
|
|
struct flm_lookup_key key = {.addr6 = dst6 };
|
2020-11-29 13:41:49 +00:00
|
|
|
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
nh = dp->f(dp->arg, key, scopeid);
|
|
|
|
#else
|
2020-11-29 13:41:49 +00:00
|
|
|
nh = lookup_nhop(fibnum, dst6, scopeid);
|
Add modular fib lookup framework.
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
2020-12-25 10:39:52 +00:00
|
|
|
#endif
|
2020-11-29 13:41:49 +00:00
|
|
|
if (nh != NULL)
|
|
|
|
return (check_urpf(nh, flags, src_if));
|
Introduce nexthop objects and new routing KPI.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
2020-11-29 13:41:49 +00:00
|
|
|
/*
|
|
|
|
* Function returning prefix match data along with the nexthop data.
|
|
|
|
* Intended to be used by the control plane code.
|
|
|
|
* Supported flags:
|
|
|
|
* NHR_UNLOCKED: do not lock radix during lookup.
|
|
|
|
* Returns pointer to rtentry and raw nexthop in @rnd. Both rtentry
|
|
|
|
* and nexthop are safe to use within current epoch. Note:
|
|
|
|
* Note: rnd_nhop can actually be the nexthop group.
|
|
|
|
*/
|
|
|
|
struct rtentry *
|
|
|
|
fib6_lookup_rt(uint32_t fibnum, const struct in6_addr *dst6,
|
|
|
|
uint32_t scopeid, uint32_t flags, struct route_nhop_data *rnd)
|
2020-04-26 18:42:38 +00:00
|
|
|
{
|
2020-11-29 13:41:49 +00:00
|
|
|
RIB_RLOCK_TRACKER;
|
2020-04-26 18:42:38 +00:00
|
|
|
struct rib_head *rh;
|
|
|
|
struct radix_node *rn;
|
2020-11-29 13:41:49 +00:00
|
|
|
struct rtentry *rt;
|
2020-04-26 18:42:38 +00:00
|
|
|
|
|
|
|
KASSERT((fibnum < rt_numfibs), ("fib6_lookup: bad fibnum"));
|
|
|
|
rh = rt_tables_get_rnh(fibnum, AF_INET6);
|
|
|
|
if (rh == NULL)
|
|
|
|
return (NULL);
|
|
|
|
|
2020-11-29 13:41:49 +00:00
|
|
|
struct sockaddr_in6 sin6 = {
|
|
|
|
.sin6_len = sizeof(struct sockaddr_in6),
|
|
|
|
.sin6_addr = *dst6,
|
|
|
|
};
|
2020-04-26 18:42:38 +00:00
|
|
|
|
|
|
|
/* Assume scopeid is valid and embed it directly */
|
|
|
|
if (IN6_IS_SCOPE_LINKLOCAL(dst6))
|
|
|
|
sin6.sin6_addr.s6_addr16[1] = htons(scopeid & 0xffff);
|
|
|
|
|
2020-11-29 13:41:49 +00:00
|
|
|
rt = NULL;
|
|
|
|
if (!(flags & NHR_UNLOCKED))
|
|
|
|
RIB_RLOCK(rh);
|
2020-04-26 18:42:38 +00:00
|
|
|
rn = rh->rnh_matchaddr((void *)&sin6, &rh->head);
|
|
|
|
if (rn != NULL && ((rn->rn_flags & RNF_ROOT) == 0)) {
|
2020-11-29 13:41:49 +00:00
|
|
|
rt = (struct rtentry *)rn;
|
|
|
|
rnd->rnd_nhop = rt->rt_nhop;
|
|
|
|
rnd->rnd_weight = rt->rt_weight;
|
|
|
|
}
|
|
|
|
if (!(flags & NHR_UNLOCKED))
|
|
|
|
RIB_RUNLOCK(rh);
|
|
|
|
|
|
|
|
return (rt);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct nhop_object *
|
|
|
|
fib6_lookup_debugnet(uint32_t fibnum, const struct in6_addr *dst6,
|
|
|
|
uint32_t scopeid, uint32_t flags)
|
|
|
|
{
|
|
|
|
struct rtentry *rt;
|
|
|
|
struct route_nhop_data rnd;
|
|
|
|
|
|
|
|
rt = fib6_lookup_rt(fibnum, dst6, scopeid, NHR_UNLOCKED, &rnd);
|
|
|
|
if (rt != NULL) {
|
|
|
|
struct nhop_object *nh = nhop_select(rnd.rnd_nhop, 0);
|
2020-04-26 18:42:38 +00:00
|
|
|
/* Ensure route & ifp is UP */
|
2020-11-29 13:41:49 +00:00
|
|
|
if (RT_LINK_IS_UP(nh->nh_ifp))
|
2020-04-26 18:42:38 +00:00
|
|
|
return (nh);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
Merge helper fib* functions used for basic lookups.
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
2015-12-08 10:50:03 +00:00
|
|
|
#endif
|