freebsd-nq/sys/dev/iicbus/ds1631.c

/*-
 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
 *
 * Copyright (c) 2012 Andreas Tobler
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <sys/param.h>
#include <sys/bus.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/callout.h>
#include <sys/conf.h>
#include <sys/cpu.h>
#include <sys/ctype.h>
#include <sys/kernel.h>
#include <sys/reboot.h>
#include <sys/rman.h>
#include <sys/sysctl.h>
#include <sys/limits.h>

#include <machine/bus.h>
#include <machine/md_var.h>

#include <dev/iicbus/iicbus.h>
#include <dev/iicbus/iiconf.h>

#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <powerpc/powermac/powermac_thermal.h>

/* Sensor: Maxim DS1631 */

#define DS1631_STOP            0x22
#define DS1631_START           0x51
#define DS1631_RESET           0x54
#define DS1631_TEMP            0xAA
#define DS1631_CONTROL         0xAC
#define DS1631_CONTROL_1SHOT   0x01
#define DS1631_CONTROL_9BIT    0x00
#define DS1631_CONTROL_10BIT   0x04
#define DS1631_CONTROL_11BIT   0x08
#define DS1631_CONTROL_12BIT   0x0C



/* Regular bus attachment functions */
static int  ds1631_probe(device_t);
static int  ds1631_attach(device_t);

struct ds1631_softc {
	struct pmac_therm	sc_sensor;
	device_t		sc_dev;
	struct intr_config_hook enum_hook;
	uint32_t                sc_addr;
	uint32_t		init_done;
};

struct write_data {
	uint8_t reg;
	uint8_t val;
};

struct read_data {
	uint8_t reg;
	uint16_t val;
};

/* Utility functions */
static int  ds1631_sensor_read(struct ds1631_softc *sc);
static int  ds1631_sensor_sysctl(SYSCTL_HANDLER_ARGS);
static void ds1631_start(void *xdev);
static int  ds1631_read_1(device_t dev, uint32_t addr, uint8_t reg,
			  uint8_t *data);
static int  ds1631_read_2(device_t dev, uint32_t addr, uint8_t reg,
			  uint16_t *data);
static int  ds1631_write(device_t dev, uint32_t addr, uint8_t reg,
			 uint8_t *buff, int len);

static device_method_t  ds1631_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		ds1631_probe),
	DEVMETHOD(device_attach,	ds1631_attach),
	{ 0, 0 },
};

static driver_t ds1631_driver = {
	"ds1631",
	ds1631_methods,
	sizeof(struct ds1631_softc)
};

static devclass_t ds1631_devclass;

DRIVER_MODULE(ds1631, iicbus, ds1631_driver, ds1631_devclass, 0, 0);

static int
ds1631_write(device_t dev, uint32_t addr, uint8_t reg, uint8_t *buff, int len)
{
	uint8_t buf[4];
	int try = 0;

	struct iic_msg msg[] = {
		{ addr, IIC_M_WR, 0, buf }
	};

	/* Prepare the write msg. */
	msg[0].len = len + 1;
	buf[0] = reg;
	memcpy(buf + 1, buff, len);

	for (;;)
	{
		if (iicbus_transfer(dev, msg, nitems(msg)) == 0)
			return (0);
		if (++try > 5) {
			device_printf(dev, "iicbus write failed\n");
			return (-1);
		}
		pause("ds1631_write", hz);
	}
}

static int
ds1631_read_1(device_t dev, uint32_t addr, uint8_t reg, uint8_t *data)
{
	uint8_t buf[4];
	int err, try = 0;

	struct iic_msg msg[2] = {
		{ addr, IIC_M_WR, 1, &reg },
		{ addr, IIC_M_RD, 1, buf },
	};

	for (;;)
	{
		err = iicbus_transfer(dev, msg, nitems(msg));
		if (err != 0)
			goto retry;

		*data = *((uint8_t*)buf);
		return (0);
	retry:
		if (++try > 5) {
			device_printf(dev, "iicbus read failed\n");
			return (-1);
		}
		pause("ds1631_read_1", hz);
	}
}

static int
ds1631_read_2(device_t dev, uint32_t addr, uint8_t reg, uint16_t *data)
{
	uint8_t buf[4];
	int err, try = 0;

	struct iic_msg msg[2] = {
		{ addr, IIC_M_WR, 1, &reg },
		{ addr, IIC_M_RD, 2, buf },
	};

	for (;;)
	{
		err = iicbus_transfer(dev, msg, nitems(msg));
		if (err != 0)
			goto retry;

		*data = *((uint16_t*)buf);
		return (0);
	retry:
		if (++try > 5) {
			device_printf(dev, "iicbus read failed\n");
			return (-1);
		}
		pause("ds1631_read_2", hz);
	}
}

static int
ds1631_probe(device_t dev)
{
	const char  *name, *compatible;
	struct ds1631_softc *sc;

	name = ofw_bus_get_name(dev);
	compatible = ofw_bus_get_compat(dev);

	if (!name)
		return (ENXIO);

	if (strcmp(name, "temp-monitor") != 0 ||
	    strcmp(compatible, "ds1631") != 0 )
		return (ENXIO);

	sc = device_get_softc(dev);
	sc->sc_dev = dev;
	sc->sc_addr = iicbus_get_addr(dev);

	device_set_desc(dev, "Temp-Monitor DS1631");

	return (0);
}

static int
ds1631_attach(device_t dev)
{
	struct ds1631_softc *sc;

	sc = device_get_softc(dev);

	sc->enum_hook.ich_func = ds1631_start;
	sc->enum_hook.ich_arg = dev;

	/*
	 * We have to wait until interrupts are enabled. I2C read and write
	 * only works if the interrupts are available.
	 * The unin/i2c is controlled by the htpic on unin. But this is not
	 * the master. The openpic on mac-io is controlling the htpic.
	 * This one gets attached after the mac-io probing and then the
	 * interrupts will be available.
	 */

	if (config_intrhook_establish(&sc->enum_hook) != 0)
		return (ENOMEM);

	return (0);
}
static int
ds1631_init(device_t dev, uint32_t addr)
{
	uint8_t conf;
	int err;
	struct ds1631_softc *sc;

	sc = device_get_softc(dev);

	err = ds1631_read_1(dev, addr, DS1631_CONTROL, &conf);
	if (err < 0) {
		device_printf(dev, "ds1631 read config failed: %x\n", err);
		return (-1);
	}

	/* Stop the conversion if not in 1SHOT mode. */
	if (conf & ~DS1631_CONTROL_1SHOT)
		err = ds1631_write(dev, addr, DS1631_STOP, &conf, 0);

	/*
	 * Setup the resolution, 10-bit is enough. Each bit increase in
	 * resolution doubles the conversion time.
	 */
	conf = DS1631_CONTROL_10BIT;

	err = ds1631_write(dev, addr, DS1631_CONTROL, &conf, sizeof(conf));
	if (err < 0) {
		device_printf(dev, "ds1631 write config failed: %x\n", err);
		return (-1);
	}

	/* And now start....*/
	err = ds1631_write(dev, addr, DS1631_START, &conf, 0);

	if (err < 0) {
		device_printf(dev, "ds1631 write start failed: %x\n", err);
		return (-1);
	}

	sc->init_done = 1;

	return (0);

}
static void
ds1631_start(void *xdev)
{
	phandle_t child, node;
	struct ds1631_softc *sc;
	struct sysctl_oid *oid, *sensroot_oid;
	struct sysctl_ctx_list *ctx;
	ssize_t plen;
	int i;
	char  sysctl_desc[40], sysctl_name[40];

	device_t dev = (device_t)xdev;

	sc = device_get_softc(dev);

	child = ofw_bus_get_node(dev);

	ctx = device_get_sysctl_ctx(dev);
	sensroot_oid = SYSCTL_ADD_NODE(ctx,
	    SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "sensor",
	    CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "DS1631 Sensor Information");

	if (OF_getprop(child, "hwsensor-zone", &sc->sc_sensor.zone,
		       sizeof(int)) < 0)
		sc->sc_sensor.zone = 0;

	plen = OF_getprop(child, "hwsensor-location", sc->sc_sensor.name,
			  sizeof(sc->sc_sensor.name));
	if (plen == -1) {
		/*
		 * Ok, no hwsensor-location property, so let's look for a
		 * location property on a sub node.
		 */
		for (node = OF_child(child); node; node = OF_peer(node))
			plen = OF_getprop(node, "location", sc->sc_sensor.name,
					  sizeof(sc->sc_sensor.name));
	}

	if (plen == -1) {
		strcpy(sysctl_name, "sensor");
	} else {
		for (i = 0; i < strlen(sc->sc_sensor.name); i++) {
			sysctl_name[i] = tolower(sc->sc_sensor.name[i]);
			if (isspace(sysctl_name[i]))
				sysctl_name[i] = '_';
		}
		sysctl_name[i] = 0;
	}

	/* Make up target temperatures. These are low, for the drive bay. */
	if (sc->sc_sensor.zone == 0) {
		sc->sc_sensor.target_temp = 400 + ZERO_C_TO_K;
		sc->sc_sensor.max_temp = 500 + ZERO_C_TO_K;
	} else {
		sc->sc_sensor.target_temp = 300 + ZERO_C_TO_K;
		sc->sc_sensor.max_temp = 500 + ZERO_C_TO_K;
	}

	sc->sc_sensor.read =
	    (int (*)(struct pmac_therm *sc))(ds1631_sensor_read);
	pmac_thermal_sensor_register(&sc->sc_sensor);

	sprintf(sysctl_desc,"%s %s", sc->sc_sensor.name, "(C)");
	oid = SYSCTL_ADD_NODE(ctx, SYSCTL_CHILDREN(sensroot_oid),
	    OID_AUTO, sysctl_name, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
	    "Sensor Information");
	SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "temp",
			CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, dev,
			0, ds1631_sensor_sysctl, "IK", sysctl_desc);

	config_intrhook_disestablish(&sc->enum_hook);
}

static int
ds1631_sensor_read(struct ds1631_softc *sc)
{
	uint16_t buf[2];
	uint16_t read;
	int err;

	if (!sc->init_done)
		ds1631_init(sc->sc_dev, sc->sc_addr);

	err = ds1631_read_2(sc->sc_dev, sc->sc_addr, DS1631_TEMP, buf);
	if (err < 0) {
		device_printf(sc->sc_dev, "ds1631 read TEMP failed: %x\n", err);
		return (-1);
	}

	read = *((int16_t *)buf);

	/*
	 * The default mode of the ADC is 12-bit, the resolution is 0.0625 C
	 * per bit. The temperature is in tenth kelvin.
	 * We use 10-bit resolution which seems enough, resolution is 0.25 C.
	 */

	return (((int16_t)(read) >> 6) * 25 / 10 + ZERO_C_TO_K);
}

static int
ds1631_sensor_sysctl(SYSCTL_HANDLER_ARGS)
{
	device_t dev;
	struct ds1631_softc *sc;
	int error;
	int temp;

	dev = arg1;
	sc = device_get_softc(dev);

	temp = ds1631_sensor_read(sc);
	if (temp < 0)
		return (EIO);

	error = sysctl_handle_int(oidp, &temp, 0, req);

	return (error);
}