freebsd-nq/sys/mips/conf/TP-WN1043ND

#
# TP-1043ND -- Kernel configuration file for the TP-Link WR-1043ND
#
# $FreeBSD$
#

# Include the default AR913x parameters common to all AR913x SoC users.
include         "AR91XX_BASE"

ident           TP-WN1043ND

# Override hints with board values
hints           "TP-WN1043ND.hints"

# Force the board memory - 32mb
options         AR71XX_REALMEM=32*1024*1024

# i2c GPIO bus
device		gpioiic
device		iicbb
device		iicbus
device		iic

# ethernet switch device
device		etherswitch

# RTL8366RB support
device		rtl8366rb

# read MSDOS formatted disks - USB
options		MSDOSFS

# Enable the uboot environment stuff rather then the
# redboot stuff.
options		AR71XX_ENV_UBOOT

# uzip - to boot natively from flash
device		geom_uzip
options		GEOM_UZIP

# Used for the static uboot partition map
device          geom_map

# Boot off of the rootfs, as defined in the geom_map setup.
options		ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
Commit configuration files for the AR913x SoC and the TP-Link WR-1043ND. The AR91XX_BASE{,.hints} files define all the common parameters for the AR913x SoC systems. The TP-1043ND config file adds local parameters. 2011-04-03 13:19:58 +00:00			`#`
			`# TP-1043ND -- Kernel configuration file for the TP-Link WR-1043ND`
			`#`
			`# $FreeBSD$`
			`#`

			`# Include the default AR913x parameters common to all AR913x SoC users.`
			`include "AR91XX_BASE"`

			`ident TP-WN1043ND`

			`# Override hints with board values`
			`hints "TP-WN1043ND.hints"`

			`# Force the board memory - 32mb`
			`options AR71XX_REALMEM=3210241024`

Flip on WN1043ND switch PHY support. * Add the i2c bitbang bus; * Add the etherswitch/rtl8366rb drivers; * "fix" the USB GPIO configuration so USB actually works. Submitted by: Stefan Bethke <stb@lassitu.de> 2012-05-12 17:41:42 +00:00			`# i2c GPIO bus`
			`device gpioiic`
			`device iicbb`
			`device iicbus`
			`device iic`

			`# ethernet switch device`
			`device etherswitch`

			`# RTL8366RB support`
			`device rtl8366rb`

Commit configuration files for the AR913x SoC and the TP-Link WR-1043ND. The AR91XX_BASE{,.hints} files define all the common parameters for the AR913x SoC systems. The TP-1043ND config file adds local parameters. 2011-04-03 13:19:58 +00:00			`# read MSDOS formatted disks - USB`
			`options MSDOSFS`

Flip on AR71XX_ENV_UBOOT so the environment variables are properly processed. (Which is to say they're currently ignored.) 2011-11-24 07:33:41 +00:00			`# Enable the uboot environment stuff rather then the`
			`# redboot stuff.`
			`options AR71XX_ENV_UBOOT`

Flesh out a geom_map setup, so the kernel can be squeezed _onto_ the device. The default flash layout gives only 1 megabyte for the kernel, gzipped. The uboot firmware running on this device only supports gzip, not lzma, so we actually _do_ have to try and slim the kernel down a bit. But, since I can't actually do that at the present, I'm opting to: * extend the kernel from 1mb to 2mb; * have rootfs fill the rest of that, save 64k; * eventually I'll hide a 64k config partition at the end, between the end of rootfs and the ART (radio configuration data.) The uboot firmware doesn't care about the partition layout. It just expects the kernel application image to sit at 0xbf020000 (right after the 128k uboot image.) The uboot header isn't actually read either - it's "faked" from a "tplink" flash image header. So as long as the map configuration here matches what is being written out via the tplink firmware generator, everything is a-ok. 2011-11-24 04:39:01 +00:00			`# uzip - to boot natively from flash`
Commit configuration files for the AR913x SoC and the TP-Link WR-1043ND. The AR91XX_BASE{,.hints} files define all the common parameters for the AR913x SoC systems. The TP-1043ND config file adds local parameters. 2011-04-03 13:19:58 +00:00			`device geom_uzip`
			`options GEOM_UZIP`
Flesh out a geom_map setup, so the kernel can be squeezed _onto_ the device. The default flash layout gives only 1 megabyte for the kernel, gzipped. The uboot firmware running on this device only supports gzip, not lzma, so we actually _do_ have to try and slim the kernel down a bit. But, since I can't actually do that at the present, I'm opting to: * extend the kernel from 1mb to 2mb; * have rootfs fill the rest of that, save 64k; * eventually I'll hide a 64k config partition at the end, between the end of rootfs and the ART (radio configuration data.) The uboot firmware doesn't care about the partition layout. It just expects the kernel application image to sit at 0xbf020000 (right after the 128k uboot image.) The uboot header isn't actually read either - it's "faked" from a "tplink" flash image header. So as long as the map configuration here matches what is being written out via the tplink firmware generator, everything is a-ok. 2011-11-24 04:39:01 +00:00
			`# Used for the static uboot partition map`
			`device geom_map`

			`# Boot off of the rootfs, as defined in the geom_map setup.`
			`options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"`