freebsd-nq/sys/netinet/sctp.h

582 lines
20 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2008-2011, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2011, by Michael Tuexen. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifndef _NETINET_SCTP_H_
#define _NETINET_SCTP_H_
#include <sys/types.h>
#define SCTP_PACKED __attribute__((packed))
/*
* SCTP protocol - RFC2960.
*/
struct sctphdr {
uint16_t src_port; /* source port */
uint16_t dest_port; /* destination port */
uint32_t v_tag; /* verification tag of packet */
uint32_t checksum; /* Adler32 C-Sum */
/* chunks follow... */
} SCTP_PACKED;
/*
* SCTP Chunks
*/
struct sctp_chunkhdr {
uint8_t chunk_type; /* chunk type */
uint8_t chunk_flags; /* chunk flags */
uint16_t chunk_length; /* chunk length */
/* optional params follow */
} SCTP_PACKED;
/*
* SCTP chunk parameters
*/
struct sctp_paramhdr {
uint16_t param_type; /* parameter type */
uint16_t param_length; /* parameter length */
} SCTP_PACKED;
/*
* user socket options: socket API defined
*/
/*
* read-write options
*/
#define SCTP_RTOINFO 0x00000001
#define SCTP_ASSOCINFO 0x00000002
#define SCTP_INITMSG 0x00000003
#define SCTP_NODELAY 0x00000004
#define SCTP_AUTOCLOSE 0x00000005
#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006
#define SCTP_PRIMARY_ADDR 0x00000007
#define SCTP_ADAPTATION_LAYER 0x00000008
/* same as above */
#define SCTP_ADAPTION_LAYER 0x00000008
#define SCTP_DISABLE_FRAGMENTS 0x00000009
#define SCTP_PEER_ADDR_PARAMS 0x0000000a
#define SCTP_DEFAULT_SEND_PARAM 0x0000000b
/* ancillary data/notification interest options */
#define SCTP_EVENTS 0x0000000c
/* Without this applied we will give V4 and V6 addresses on a V6 socket */
#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d
#define SCTP_MAXSEG 0x0000000e
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_DELAYED_SACK 0x0000000f
#define SCTP_FRAGMENT_INTERLEAVE 0x00000010
#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011
/* authentication support */
#define SCTP_AUTH_CHUNK 0x00000012
#define SCTP_AUTH_KEY 0x00000013
#define SCTP_HMAC_IDENT 0x00000014
#define SCTP_AUTH_ACTIVE_KEY 0x00000015
#define SCTP_AUTH_DELETE_KEY 0x00000016
#define SCTP_USE_EXT_RCVINFO 0x00000017
#define SCTP_AUTO_ASCONF 0x00000018 /* rw */
#define SCTP_MAXBURST 0x00000019 /* rw */
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_MAX_BURST 0x00000019 /* rw */
/* assoc level context */
#define SCTP_CONTEXT 0x0000001a /* rw */
/* explicit EOR signalling */
#define SCTP_EXPLICIT_EOR 0x0000001b
#define SCTP_REUSE_PORT 0x0000001c /* rw */
#define SCTP_AUTH_DEACTIVATE_KEY 0x0000001d
/*
* read-only options
*/
#define SCTP_STATUS 0x00000100
#define SCTP_GET_PEER_ADDR_INFO 0x00000101
/* authentication support */
#define SCTP_PEER_AUTH_CHUNKS 0x00000102
#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103
#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */
#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */
#define SCTP_TIMEOUTS 0x00000106
/*
* user socket options: BSD implementation specific
*/
/*
* Blocking I/O is enabled on any TCP type socket by default. For the UDP
* model if this is turned on then the socket buffer is shared for send
* resources amongst all associations. The default for the UDP model is that
* is SS_NBIO is set. Which means all associations have a separate send
* limit BUT they will NOT ever BLOCK instead you will get an error back
* EAGAIN if you try to send too much. If you want the blocking semantics you
* set this option at the cost of sharing one socket send buffer size amongst
* all associations. Peeled off sockets turn this option off and block. But
* since both TCP and peeled off sockets have only one assoc per socket this
* is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP
* model OR peeled off UDP model, but we do allow you to do so. You just use
* the normal syscall to toggle SS_NBIO the way you want.
*
* Blocking I/O is controlled by the SS_NBIO flag on the socket state so_state
* field.
*/
/* these should probably go into sockets API */
#define SCTP_RESET_STREAMS 0x00001004 /* wo */
/* here on down are more implementation specific */
#define SCTP_SET_DEBUG_LEVEL 0x00001005
#define SCTP_CLR_STAT_LOG 0x00001007
/* CMT ON/OFF socket option */
#define SCTP_CMT_ON_OFF 0x00001200
#define SCTP_CMT_USE_DAC 0x00001201
/* JRS - Pluggable Congestion Control Socket option */
#define SCTP_PLUGGABLE_CC 0x00001202
/* RS - Pluggable Stream Scheduling Socket option */
#define SCTP_PLUGGABLE_SS 0x00001203
#define SCTP_SS_VALUE 0x00001204
#define SCTP_CC_OPTION 0x00001205 /* Options for CC
* modules */
/* read only */
#define SCTP_GET_SNDBUF_USE 0x00001101
#define SCTP_GET_STAT_LOG 0x00001103
#define SCTP_PCB_STATUS 0x00001104
#define SCTP_GET_NONCE_VALUES 0x00001105
/* Special hook for dynamically setting primary for all assoc's,
* this is a write only option that requires root privilege.
*/
#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001
/* VRF (virtual router feature) and multi-VRF support
* options. VRF's provide splits within a router
* that give the views of multiple routers. A
* standard host, without VRF support, is just
* a single VRF. If VRF's are supported then
* the transport must be VRF aware. This means
* that every socket call coming in must be directed
* within the endpoint to one of the VRF's it belongs
* to. The endpoint, before binding, may select
* the "default" VRF it is in by using a set socket
* option with SCTP_VRF_ID. This will also
* get propagated to the default VRF. Once the
* endpoint binds an address then it CANNOT add
* additional VRF's to become a Multi-VRF endpoint.
*
* Before BINDING additional VRF's can be added with
* the SCTP_ADD_VRF_ID call or deleted with
* SCTP_DEL_VRF_ID.
*
* Associations are ALWAYS contained inside a single
* VRF. They cannot reside in two (or more) VRF's. Incoming
* packets, assuming the router is VRF aware, can always
* tell us what VRF they arrived on. A host not supporting
* any VRF's will find that the packets always arrived on the
* single VRF that the host has.
*
*/
#define SCTP_VRF_ID 0x00003001
#define SCTP_ADD_VRF_ID 0x00003002
#define SCTP_GET_VRF_IDS 0x00003003
#define SCTP_GET_ASOC_VRF 0x00003004
#define SCTP_DEL_VRF_ID 0x00003005
/*
* If you enable packet logging you can get
* a poor mans ethereal output in binary
* form. Note this is a compile option to
* the kernel, SCTP_PACKET_LOGGING, and
* without it in your kernel you
* will get a EOPNOTSUPP
*/
#define SCTP_GET_PACKET_LOG 0x00004001
/*
* hidden implementation specific options these are NOT user visible (should
* move out of sctp.h)
*/
/* sctp_bindx() flags as hidden socket options */
#define SCTP_BINDX_ADD_ADDR 0x00008001
#define SCTP_BINDX_REM_ADDR 0x00008002
/* Hidden socket option that gets the addresses */
#define SCTP_GET_PEER_ADDRESSES 0x00008003
#define SCTP_GET_LOCAL_ADDRESSES 0x00008004
/* return the total count in bytes needed to hold all local addresses bound */
#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005
/* Return the total count in bytes needed to hold the remote address */
#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006
/* hidden option for connectx */
#define SCTP_CONNECT_X 0x00008007
/* hidden option for connectx_delayed, part of sendx */
#define SCTP_CONNECT_X_DELAYED 0x00008008
#define SCTP_CONNECT_X_COMPLETE 0x00008009
/* hidden socket option based sctp_peeloff */
#define SCTP_PEELOFF 0x0000800a
/* the real worker for sctp_getaddrlen() */
#define SCTP_GET_ADDR_LEN 0x0000800b
/* temporary workaround for Apple listen() issue, no args used */
#define SCTP_LISTEN_FIX 0x0000800c
/* Debug things that need to be purged */
#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00
/* JRS - Supported congestion control modules for pluggable
* congestion control
*/
/* Standard TCP Congestion Control */
#define SCTP_CC_RFC2581 0x00000000
/* High Speed TCP Congestion Control (Floyd) */
#define SCTP_CC_HSTCP 0x00000001
/* HTCP Congestion Control */
#define SCTP_CC_HTCP 0x00000002
/* RTCC Congestion Control - RFC2581 plus */
#define SCTP_CC_RTCC 0x00000003
#define SCTP_CC_OPT_RTCC_SETMODE 0x00002000
#define SCTP_CC_OPT_USE_DCCC_ECN 0x00002001
#define SCTP_CC_OPT_STEADY_STEP 0x00002002
/* RS - Supported stream scheduling modules for pluggable
* stream scheduling
*/
/* Default simple round-robin */
#define SCTP_SS_DEFAULT 0x00000000
/* Real round-robin */
#define SCTP_SS_ROUND_ROBIN 0x00000001
/* Real round-robin per packet */
#define SCTP_SS_ROUND_ROBIN_PACKET 0x00000002
/* Priority */
#define SCTP_SS_PRIORITY 0x00000003
/* Fair Bandwidth */
#define SCTP_SS_FAIR_BANDWITH 0x00000004
/* First-come, first-serve */
#define SCTP_SS_FIRST_COME 0x00000005
/* fragment interleave constants
* setting must be one of these or
* EINVAL returned.
*/
#define SCTP_FRAG_LEVEL_0 0x00000000
#define SCTP_FRAG_LEVEL_1 0x00000001
#define SCTP_FRAG_LEVEL_2 0x00000002
/*
* user state values
*/
#define SCTP_CLOSED 0x0000
#define SCTP_BOUND 0x1000
#define SCTP_LISTEN 0x2000
#define SCTP_COOKIE_WAIT 0x0002
#define SCTP_COOKIE_ECHOED 0x0004
#define SCTP_ESTABLISHED 0x0008
#define SCTP_SHUTDOWN_SENT 0x0010
#define SCTP_SHUTDOWN_RECEIVED 0x0020
#define SCTP_SHUTDOWN_ACK_SENT 0x0040
#define SCTP_SHUTDOWN_PENDING 0x0080
/*
* SCTP operational error codes (user visible)
*/
#define SCTP_CAUSE_NO_ERROR 0x0000
#define SCTP_CAUSE_INVALID_STREAM 0x0001
#define SCTP_CAUSE_MISSING_PARAM 0x0002
#define SCTP_CAUSE_STALE_COOKIE 0x0003
#define SCTP_CAUSE_OUT_OF_RESC 0x0004
#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005
#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006
#define SCTP_CAUSE_INVALID_PARAM 0x0007
#define SCTP_CAUSE_UNRECOG_PARAM 0x0008
#define SCTP_CAUSE_NO_USER_DATA 0x0009
#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a
#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b
#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c
#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d
/* Error causes from RFC5061 */
#define SCTP_CAUSE_DELETING_LAST_ADDR 0x00a0
#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x00a1
#define SCTP_CAUSE_DELETING_SRC_ADDR 0x00a2
#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x00a3
#define SCTP_CAUSE_REQUEST_REFUSED 0x00a4
/* Error causes from nat-draft */
#define SCTP_CAUSE_NAT_COLLIDING_STATE 0x00b0
#define SCTP_CAUSE_NAT_MISSING_STATE 0x00b1
/* Error causes from RFC4895 */
#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105
/*
* error cause parameters (user visible)
*/
struct sctp_error_cause {
uint16_t code;
uint16_t length;
/* optional cause-specific info may follow */
} SCTP_PACKED;
struct sctp_error_invalid_stream {
struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STREAM */
uint16_t stream_id; /* stream id of the DATA in error */
uint16_t reserved;
} SCTP_PACKED;
struct sctp_error_missing_param {
struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARAM */
uint32_t num_missing_params; /* number of missing parameters */
/* uint16_t param_type's follow */
} SCTP_PACKED;
struct sctp_error_stale_cookie {
struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE */
uint32_t stale_time; /* time in usec of staleness */
} SCTP_PACKED;
struct sctp_error_out_of_resource {
struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOURCES */
} SCTP_PACKED;
struct sctp_error_unresolv_addr {
struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE_ADDR */
} SCTP_PACKED;
struct sctp_error_unrecognized_chunk {
struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUNK */
struct sctp_chunkhdr ch;/* header from chunk in error */
} SCTP_PACKED;
/*
* Main SCTP chunk types we place these here so natd and f/w's in user land
* can find them.
*/
/************0x00 series ***********/
#define SCTP_DATA 0x00
#define SCTP_INITIATION 0x01
#define SCTP_INITIATION_ACK 0x02
#define SCTP_SELECTIVE_ACK 0x03
#define SCTP_HEARTBEAT_REQUEST 0x04
#define SCTP_HEARTBEAT_ACK 0x05
#define SCTP_ABORT_ASSOCIATION 0x06
#define SCTP_SHUTDOWN 0x07
#define SCTP_SHUTDOWN_ACK 0x08
#define SCTP_OPERATION_ERROR 0x09
#define SCTP_COOKIE_ECHO 0x0a
#define SCTP_COOKIE_ACK 0x0b
#define SCTP_ECN_ECHO 0x0c
#define SCTP_ECN_CWR 0x0d
#define SCTP_SHUTDOWN_COMPLETE 0x0e
/* RFC4895 */
#define SCTP_AUTHENTICATION 0x0f
/* EY nr_sack chunk id*/
#define SCTP_NR_SELECTIVE_ACK 0x10
/************0x40 series ***********/
/************0x80 series ***********/
/* RFC5061 */
#define SCTP_ASCONF_ACK 0x80
/* draft-ietf-stewart-pktdrpsctp */
#define SCTP_PACKET_DROPPED 0x81
/* draft-ietf-stewart-strreset-xxx */
#define SCTP_STREAM_RESET 0x82
/* RFC4820 */
#define SCTP_PAD_CHUNK 0x84
/************0xc0 series ***********/
/* RFC3758 */
#define SCTP_FORWARD_CUM_TSN 0xc0
/* RFC5061 */
#define SCTP_ASCONF 0xc1
/* ABORT and SHUTDOWN COMPLETE FLAG */
#define SCTP_HAD_NO_TCB 0x01
/* Packet dropped flags */
#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB
#define SCTP_BADCRC 0x02
#define SCTP_PACKET_TRUNCATED 0x04
/* Flag for ECN -CWR */
#define SCTP_CWR_REDUCE_OVERRIDE 0x01
#define SCTP_CWR_IN_SAME_WINDOW 0x02
#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite
* time */
#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst
* in sat */
/* Data Chuck Specific Flags */
#define SCTP_DATA_FRAG_MASK 0x03
#define SCTP_DATA_MIDDLE_FRAG 0x00
#define SCTP_DATA_LAST_FRAG 0x01
#define SCTP_DATA_FIRST_FRAG 0x02
#define SCTP_DATA_NOT_FRAG 0x03
#define SCTP_DATA_UNORDERED 0x04
#define SCTP_DATA_SACK_IMMEDIATELY 0x08
/* ECN Nonce: SACK Chunk Specific Flags */
#define SCTP_SACK_NONCE_SUM 0x01
/* CMT DAC algorithm SACK flag */
#define SCTP_SACK_CMT_DAC 0x80
/*
* PCB flags (in sctp_flags bitmask).
* Note the features and flags are meant
* for use by netstat.
*/
#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001
#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002
#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004
#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008
#define SCTP_PCB_FLAGS_UNBOUND 0x00000010
#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000
#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000
#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000
/* TCP model support */
#define SCTP_PCB_FLAGS_CONNECTED 0x00200000
#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000
#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000
#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000
#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000
#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000
#define SCTP_PCB_FLAGS_BLOCKING_IO 0x08000000
#define SCTP_PCB_FLAGS_SOCKET_GONE 0x10000000
#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x20000000
#define SCTP_PCB_FLAGS_SOCKET_CANT_READ 0x40000000
/* flags to copy to new PCB */
#define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\
SCTP_PCB_FLAGS_WAKEINPUT|\
SCTP_PCB_FLAGS_BOUND_V6)
/*
* PCB Features (in sctp_features bitmask)
*/
#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002
#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004
#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008
#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010
#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020
#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040
#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080
/* socket options */
#define SCTP_PCB_FLAGS_NODELAY 0x00000100
#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200
#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400
#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800
#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000
#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000
#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000
#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000
#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000
#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000
#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000
#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000
#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000
#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000
#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x00800000
#define SCTP_PCB_FLAGS_MULTIPLE_ASCONFS 0x01000000
#define SCTP_PCB_FLAGS_PORTREUSE 0x02000000
#define SCTP_PCB_FLAGS_DRYEVNT 0x04000000
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/*-
* mobility_features parameters (by micchie).Note
* these features are applied against the
* sctp_mobility_features flags.. not the sctp_features
* flags.
*/
#define SCTP_MOBILITY_BASE 0x00000001
#define SCTP_MOBILITY_FASTHANDOFF 0x00000002
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#define SCTP_MOBILITY_PRIM_DELETED 0x00000004
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU
* discovery */
#include <netinet/sctp_uio.h>
/* This dictates the size of the packet
* collection buffer. This only applies
* if SCTP_PACKET_LOGGING is enabled in
* your config.
*/
#define SCTP_PACKET_LOG_SIZE 65536
/* Maximum delays and such a user can set for options that
* take ms.
*/
#define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */
#define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */
#define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */
/* Types of logging/KTR tracing that can be enabled via the
* sysctl net.inet.sctp.sctp_logging. You must also enable
* SUBSYS tracing.
* Note that you must have the SCTP option in the kernel
* to enable these as well.
*/
#define SCTP_BLK_LOGGING_ENABLE 0x00000001
#define SCTP_CWND_MONITOR_ENABLE 0x00000002
#define SCTP_CWND_LOGGING_ENABLE 0x00000004
#define SCTP_EARLYFR_LOGGING_ENABLE 0x00000010
#define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020
#define SCTP_FR_LOGGING_ENABLE 0x00000040
#define SCTP_LOCK_LOGGING_ENABLE 0x00000080
#define SCTP_MAP_LOGGING_ENABLE 0x00000100
#define SCTP_MBCNT_LOGGING_ENABLE 0x00000200
#define SCTP_MBUF_LOGGING_ENABLE 0x00000400
#define SCTP_NAGLE_LOGGING_ENABLE 0x00000800
#define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000
#define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000
#define SCTP_SACK_LOGGING_ENABLE 0x00004000
#define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000
#define SCTP_SB_LOGGING_ENABLE 0x00010000
#define SCTP_STR_LOGGING_ENABLE 0x00020000
#define SCTP_WAKE_LOGGING_ENABLE 0x00040000
#define SCTP_LOG_MAXBURST_ENABLE 0x00080000
#define SCTP_LOG_RWND_ENABLE 0x00100000
#define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000
#define SCTP_LTRACE_CHUNK_ENABLE 0x00400000
#define SCTP_LTRACE_ERROR_ENABLE 0x00800000
#define SCTP_LAST_PACKET_TRACING 0x01000000
#define SCTP_THRESHOLD_LOGGING 0x02000000
#define SCTP_LOG_AT_SEND_2_SCTP 0x04000000
#define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000
#define SCTP_LOG_TRY_ADVANCE 0x10000000
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
#undef SCTP_PACKED
#endif /* !_NETINET_SCTP_H_ */