d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ebd05adab8
freebsd-nq/sys/mips/conf/PB92

136 lines
3.3 KiB
Plaintext
Raw Normal View History

An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
#
# PB92 -- Kernel configuration file for FreeBSD/mips for Atheros PB92 reference
# board (AR7242)
#
# $FreeBSD$
#
ident PB92
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# XXX The default load address in the Uboot environment is 0x80010000
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
makeoptions KERNLOADADDR=0x80050000
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options HZ=1000
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# The PB92 has 32mb of RAM; hard-code that
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AR71XX_REALMEM=32*1024*1024
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
# It's UBOOT, not Redboot - without this, things will hang at startup
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AR71XX_ENV_UBOOT
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
# We have to build most things as modules rather than in the kernel.
# The PB92 has 4MB of SPI flash and the default kernel "partition"
# is only 892KiB. In order to try and squeeze into that (so people
# who already are using it without modifying the default flash layout)
# we need to cut down on a lot of things.
Back out r253779 & r253786.
2013-07-31 17:21:18 +00:00
makeoptions MODULES_OVERRIDE="ath ath_pci ath_ahb bridgestp if_bridge if_gif if_gre random wlan wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt wlan_tkip wlan_wep wlan_xauth usb ar71xx"
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
hints "PB92.hints"
include "../atheros/std.ar71xx"
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
makeoptions MODULES_OVERRIDE=""
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options DDB
options KDB
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
# Can't do IPv6 - it just doesn't fit.
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
# options INET6
# options NFSCL #Network Filesystem Client
options PSEUDOFS #Pseudo-filesystem framework
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options ALQ
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
# Debugging for use in -current
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options DEADLKRES
options INVARIANTS
options INVARIANT_SUPPORT
options WITNESS
options WITNESS_SKIPSPIN
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
options FFS #Berkeley Fast Filesystem
#options SOFTUPDATES #Enable FFS soft updates support
#options UFS_ACL #Support for access control lists
#options UFS_DIRHASH #Improve performance on big directories
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
# Support uncompress lzma rootfs
device geom_uncompress
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options GEOM_UNCOMPRESS
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# PCI bus
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
device pci
device ar724x_pci
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# NVRAM U-Boot Environment -> Kernel environment
device nvram2env
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
# Wireless NIC cards
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options IEEE80211_DEBUG
options IEEE80211_SUPPORT_MESH
options IEEE80211_SUPPORT_TDMA
options IEEE80211_ALQ
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_xauth # 802.11 hostap support
#device ath # Atheros pci/cardbus NIC's
#device ath_pci # PCI/PCIe bus glue
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
options ATH_DEBUG
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options ATH_ENABLE_11N
options ATH_DIAGAPI
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
# device ath_hal
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AH_SUPPORT_AR5416
options AH_DEBUG
options AH_DEBUG_ALQ
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
# device ath_rate_sample
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
device mii
device arge
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# USB devices - PB92 has EHCI only
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
#device usb
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
options USB_DEBUG
options USB_HOST_ALIGN=32
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
#device ehci
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# Mass storage
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
#device scbus
#device umass
#device da
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# Read MSDOS formatted disks
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
# options MSDOSFS
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# GPIO Bus
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
#device gpio
#device gpioled
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# SPI and flash
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
device spibus
device ar71xx_spi
device mx25l
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# The flash is statically partitioned; add in that
device geom_map
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
device ar71xx_wdog
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# Serial
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
device uart
Migrate the AR71xx UART (an 8250 derivative) to hide behind uart_ar71xx. The AR9330/AR9331 UART is a totally different thing, so having it included with 'uart' is not going to work out.
2012-11-17 04:05:46 +00:00
device uart_ar71xx
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
Add nvram2env (untested) and geom_map (tested) to PB92.
2011-05-05 09:04:49 +00:00
# Network twiddling
An example configuration file for the Atheros PB92. TODO: * pcie doesn't yet work properly, I'm working on it. * if_arge doesn't work - it's likely the phy mask is wrong; again I'm working on it.
2011-04-30 12:25:09 +00:00
device loop
device ether
Begin modifying the PB92 config file to actually generate a flashable, bootable image. The kernel has to fit inside an 896KiB area in a 4MB SPI flash. So a bunch of stuff can't be included (and more is to come), including (unfortunately) IPv6. TODO: * GPIO modules need to be created * Shrink the image a bit more by removing some of the CAM layer debugging strings.
2012-03-12 01:15:58 +00:00
#device md
#device bpf
#device random
#device if_bridge
Reference in New Issue Copy Permalink