freebsd-nq/lib/libvmmapi/vmmapi_freebsd.c

346 lines
9.4 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <machine/specialreg.h>
#include <machine/segments.h>
#include <machine/vmm.h>
Add support for FreeBSD/i386 guests under bhyve. - Similar to the hack for bootinfo32.c in userboot, define _MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot. This allows userboot to load 32-bit kernels and modules. - Copy the SMAP generation code out of bootinfo64.c and into its own file so it can be shared with bootinfo32.c to pass an SMAP to the i386 kernel. - Use uint32_t instead of u_long when aligning module metadata in bootinfo32.c in userboot, as otherwise the metadata used 64-bit alignment which corrupted the layout. - Populate the basemem and extmem members of the bootinfo struct passed to 32-bit kernels. - Fix the 32-bit stack in userboot to start at the top of the stack instead of the bottom so that there is room to grow before the kernel switches to its own stack. - Push a fake return address onto the 32-bit stack in addition to the arguments normally passed to exec() in the loader. This return address is needed to convince recover_bootinfo() in the 32-bit locore code that it is being invoked from a "new" boot block. - Add a routine to libvmmapi to setup a 32-bit flat mode register state including a GDT and TSS that is able to start the i386 kernel and update bhyveload to use it when booting an i386 kernel. - Use the guest register state to determine the CPU's current instruction mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long mode) in the instruction emulation code. Update the gla2gpa() routine used when fetching instructions to handle flat mode, 32-bit paging, and PAE paging in addition to long mode paging. Don't look for a REX prefix when the CPU is in 32-bit mode, and use the detected mode to enable the existing 32-bit mode code when decoding the mod r/m byte. Reviewed by: grehan, neel MFC after: 1 month
2014-02-05 04:39:03 +00:00
#include <errno.h>
#include <string.h>
#include "vmmapi.h"
Add support for FreeBSD/i386 guests under bhyve. - Similar to the hack for bootinfo32.c in userboot, define _MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot. This allows userboot to load 32-bit kernels and modules. - Copy the SMAP generation code out of bootinfo64.c and into its own file so it can be shared with bootinfo32.c to pass an SMAP to the i386 kernel. - Use uint32_t instead of u_long when aligning module metadata in bootinfo32.c in userboot, as otherwise the metadata used 64-bit alignment which corrupted the layout. - Populate the basemem and extmem members of the bootinfo struct passed to 32-bit kernels. - Fix the 32-bit stack in userboot to start at the top of the stack instead of the bottom so that there is room to grow before the kernel switches to its own stack. - Push a fake return address onto the 32-bit stack in addition to the arguments normally passed to exec() in the loader. This return address is needed to convince recover_bootinfo() in the 32-bit locore code that it is being invoked from a "new" boot block. - Add a routine to libvmmapi to setup a 32-bit flat mode register state including a GDT and TSS that is able to start the i386 kernel and update bhyveload to use it when booting an i386 kernel. - Use the guest register state to determine the CPU's current instruction mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long mode) in the instruction emulation code. Update the gla2gpa() routine used when fetching instructions to handle flat mode, 32-bit paging, and PAE paging in addition to long mode paging. Don't look for a REX prefix when the CPU is in 32-bit mode, and use the detected mode to enable the existing 32-bit mode code when decoding the mod r/m byte. Reviewed by: grehan, neel MFC after: 1 month
2014-02-05 04:39:03 +00:00
#define I386_TSS_SIZE 104
#define DESC_PRESENT 0x00000080
#define DESC_LONGMODE 0x00002000
#define DESC_DEF32 0x00004000
#define DESC_GRAN 0x00008000
#define DESC_UNUSABLE 0x00010000
#define GUEST_NULL_SEL 0
#define GUEST_CODE_SEL 1
#define GUEST_DATA_SEL 2
Add support for FreeBSD/i386 guests under bhyve. - Similar to the hack for bootinfo32.c in userboot, define _MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot. This allows userboot to load 32-bit kernels and modules. - Copy the SMAP generation code out of bootinfo64.c and into its own file so it can be shared with bootinfo32.c to pass an SMAP to the i386 kernel. - Use uint32_t instead of u_long when aligning module metadata in bootinfo32.c in userboot, as otherwise the metadata used 64-bit alignment which corrupted the layout. - Populate the basemem and extmem members of the bootinfo struct passed to 32-bit kernels. - Fix the 32-bit stack in userboot to start at the top of the stack instead of the bottom so that there is room to grow before the kernel switches to its own stack. - Push a fake return address onto the 32-bit stack in addition to the arguments normally passed to exec() in the loader. This return address is needed to convince recover_bootinfo() in the 32-bit locore code that it is being invoked from a "new" boot block. - Add a routine to libvmmapi to setup a 32-bit flat mode register state including a GDT and TSS that is able to start the i386 kernel and update bhyveload to use it when booting an i386 kernel. - Use the guest register state to determine the CPU's current instruction mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long mode) in the instruction emulation code. Update the gla2gpa() routine used when fetching instructions to handle flat mode, 32-bit paging, and PAE paging in addition to long mode paging. Don't look for a REX prefix when the CPU is in 32-bit mode, and use the detected mode to enable the existing 32-bit mode code when decoding the mod r/m byte. Reviewed by: grehan, neel MFC after: 1 month
2014-02-05 04:39:03 +00:00
#define GUEST_TSS_SEL 3
#define GUEST_GDTR_LIMIT64 (3 * 8 - 1)
static struct segment_descriptor i386_gdt[] = {
{}, /* NULL */
{ .sd_lolimit = 0xffff, .sd_type = SDT_MEMER, /* CODE */
.sd_p = 1, .sd_hilimit = 0xf, .sd_def32 = 1, .sd_gran = 1 },
{ .sd_lolimit = 0xffff, .sd_type = SDT_MEMRW, /* DATA */
.sd_p = 1, .sd_hilimit = 0xf, .sd_def32 = 1, .sd_gran = 1 },
{ .sd_lolimit = I386_TSS_SIZE - 1, /* TSS */
.sd_type = SDT_SYS386TSS, .sd_p = 1 }
};
/*
* Setup the 'vcpu' register set such that it will begin execution at
* 'eip' in flat mode.
*/
int
vm_setup_freebsd_registers_i386(struct vmctx *vmctx, int vcpu, uint32_t eip,
uint32_t gdtbase, uint32_t esp)
{
uint64_t cr0, rflags, desc_base;
uint32_t desc_access, desc_limit, tssbase;
uint16_t gsel;
struct segment_descriptor *gdt;
int error, tmp;
/* A 32-bit guest requires unrestricted mode. */
error = vm_get_capability(vmctx, vcpu, VM_CAP_UNRESTRICTED_GUEST, &tmp);
if (error)
goto done;
error = vm_set_capability(vmctx, vcpu, VM_CAP_UNRESTRICTED_GUEST, 1);
if (error)
goto done;
cr0 = CR0_PE | CR0_NE;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CR0, cr0)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CR4, 0)) != 0)
goto done;
/*
* Forcing EFER to 0 causes bhyve to clear the "IA-32e guest
* mode" entry control.
*/
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_EFER, 0)))
goto done;
gdt = vm_map_gpa(vmctx, gdtbase, 0x1000);
if (gdt == NULL)
return (EFAULT);
memcpy(gdt, i386_gdt, sizeof(i386_gdt));
desc_base = gdtbase;
desc_limit = sizeof(i386_gdt) - 1;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_GDTR,
desc_base, desc_limit, 0);
if (error != 0)
goto done;
/* Place the TSS one page above the GDT. */
tssbase = gdtbase + 0x1000;
gdt[3].sd_lobase = tssbase;
rflags = 0x2;
error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_RFLAGS, rflags);
if (error)
goto done;
desc_base = 0;
desc_limit = 0xffffffff;
desc_access = DESC_GRAN | DESC_DEF32 | DESC_PRESENT | SDT_MEMERA;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_CS,
desc_base, desc_limit, desc_access);
desc_access = DESC_GRAN | DESC_DEF32 | DESC_PRESENT | SDT_MEMRWA;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_DS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_ES,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_FS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_GS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_SS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
desc_base = tssbase;
desc_limit = I386_TSS_SIZE - 1;
desc_access = DESC_PRESENT | SDT_SYS386BSY;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_TR,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_LDTR, 0, 0,
DESC_UNUSABLE);
if (error)
goto done;
gsel = GSEL(GUEST_CODE_SEL, SEL_KPL);
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CS, gsel)) != 0)
goto done;
gsel = GSEL(GUEST_DATA_SEL, SEL_KPL);
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_DS, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_ES, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_FS, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_GS, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_SS, gsel)) != 0)
goto done;
gsel = GSEL(GUEST_TSS_SEL, SEL_KPL);
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_TR, gsel)) != 0)
goto done;
/* LDTR is pointing to the null selector */
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_LDTR, 0)) != 0)
goto done;
/* entry point */
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_RIP, eip)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_RSP, esp)) != 0)
goto done;
error = 0;
done:
return (error);
}
void
vm_setup_freebsd_gdt(uint64_t *gdtr)
{
gdtr[GUEST_NULL_SEL] = 0;
gdtr[GUEST_CODE_SEL] = 0x0020980000000000;
gdtr[GUEST_DATA_SEL] = 0x0000900000000000;
}
/*
* Setup the 'vcpu' register set such that it will begin execution at
* 'rip' in long mode.
*/
int
vm_setup_freebsd_registers(struct vmctx *vmctx, int vcpu,
uint64_t rip, uint64_t cr3, uint64_t gdtbase,
uint64_t rsp)
{
int error;
uint64_t cr0, cr4, efer, rflags, desc_base;
uint32_t desc_access, desc_limit;
uint16_t gsel;
cr0 = CR0_PE | CR0_PG | CR0_NE;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CR0, cr0)) != 0)
goto done;
cr4 = CR4_PAE;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CR4, cr4)) != 0)
goto done;
efer = EFER_LME | EFER_LMA;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_EFER, efer)))
goto done;
rflags = 0x2;
error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_RFLAGS, rflags);
if (error)
goto done;
desc_base = 0;
desc_limit = 0;
desc_access = 0x0000209B;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_CS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
desc_access = 0x00000093;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_DS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_ES,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_FS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_GS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_SS,
desc_base, desc_limit, desc_access);
if (error)
goto done;
/*
* XXX TR is pointing to null selector even though we set the
* TSS segment to be usable with a base address and limit of 0.
*/
desc_access = 0x0000008b;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_TR, 0, 0, desc_access);
if (error)
goto done;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_LDTR, 0, 0,
DESC_UNUSABLE);
if (error)
goto done;
gsel = GSEL(GUEST_CODE_SEL, SEL_KPL);
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CS, gsel)) != 0)
goto done;
gsel = GSEL(GUEST_DATA_SEL, SEL_KPL);
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_DS, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_ES, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_FS, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_GS, gsel)) != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_SS, gsel)) != 0)
goto done;
/* XXX TR is pointing to the null selector */
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_TR, 0)) != 0)
goto done;
/* LDTR is pointing to the null selector */
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_LDTR, 0)) != 0)
goto done;
/* entry point */
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_RIP, rip)) != 0)
goto done;
/* page table base */
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_CR3, cr3)) != 0)
goto done;
desc_base = gdtbase;
Add support for FreeBSD/i386 guests under bhyve. - Similar to the hack for bootinfo32.c in userboot, define _MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot. This allows userboot to load 32-bit kernels and modules. - Copy the SMAP generation code out of bootinfo64.c and into its own file so it can be shared with bootinfo32.c to pass an SMAP to the i386 kernel. - Use uint32_t instead of u_long when aligning module metadata in bootinfo32.c in userboot, as otherwise the metadata used 64-bit alignment which corrupted the layout. - Populate the basemem and extmem members of the bootinfo struct passed to 32-bit kernels. - Fix the 32-bit stack in userboot to start at the top of the stack instead of the bottom so that there is room to grow before the kernel switches to its own stack. - Push a fake return address onto the 32-bit stack in addition to the arguments normally passed to exec() in the loader. This return address is needed to convince recover_bootinfo() in the 32-bit locore code that it is being invoked from a "new" boot block. - Add a routine to libvmmapi to setup a 32-bit flat mode register state including a GDT and TSS that is able to start the i386 kernel and update bhyveload to use it when booting an i386 kernel. - Use the guest register state to determine the CPU's current instruction mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long mode) in the instruction emulation code. Update the gla2gpa() routine used when fetching instructions to handle flat mode, 32-bit paging, and PAE paging in addition to long mode paging. Don't look for a REX prefix when the CPU is in 32-bit mode, and use the detected mode to enable the existing 32-bit mode code when decoding the mod r/m byte. Reviewed by: grehan, neel MFC after: 1 month
2014-02-05 04:39:03 +00:00
desc_limit = GUEST_GDTR_LIMIT64;
error = vm_set_desc(vmctx, vcpu, VM_REG_GUEST_GDTR,
desc_base, desc_limit, 0);
if (error != 0)
goto done;
if ((error = vm_set_register(vmctx, vcpu, VM_REG_GUEST_RSP, rsp)) != 0)
goto done;
error = 0;
done:
return (error);
}