freebsd-nq/usr.sbin/ypbind/yp_ping.c

332 lines
9.6 KiB
C
Raw Normal View History

This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
/*
* Copyright (c) 1996, 1997
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Sun RPC is a product of Sun Microsystems, Inc. and is provided for
* unrestricted use provided that this legend is included on all tape
* media and as a part of the software program in whole or part. Users
* may copy or modify Sun RPC without charge, but are not authorized
* to license or distribute it to anyone else except as part of a product or
* program developed by the user.
*
* SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
* WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
* PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
*
* Sun RPC is provided with no support and without any obligation on the
* part of Sun Microsystems, Inc. to assist in its use, correction,
* modification or enhancement.
*
* SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
* INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
* OR ANY PART THEREOF.
*
* In no event will Sun Microsystems, Inc. be liable for any lost revenue
* or profits or other special, indirect and consequential damages, even if
* Sun has been advised of the possibility of such damages.
*
* Sun Microsystems, Inc.
* 2550 Garcia Avenue
* Mountain View, California 94043
*/
#ifndef lint
#if 0
static char *sccsid = "@(#)from: clnt_udp.c 1.39 87/08/11 Copyr 1984 Sun Micro";
static char *sccsid = "@(#)from: clnt_udp.c 2.2 88/08/01 4.0 RPCSRC";
#endif
static const char rcsid[] =
1999-08-28 01:35:59 +00:00
"$FreeBSD$";
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
#endif
/*
* clnt_udp.c, Implements a UDP/IP based, client side RPC.
*
* Copyright (C) 1984, Sun Microsystems, Inc.
*/
#include <errno.h>
#include <netdb.h>
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <pthread.h>
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
#include <rpc/rpc.h>
#include <rpc/pmap_clnt.h>
#include <rpc/pmap_prot.h>
#include <rpcsvc/yp.h>
#include <sys/types.h>
#include <sys/poll.h>
#include <sys/socket.h>
#include <sys/signal.h>
#include <sys/ioctl.h>
#include <net/if.h>
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
#include "yp_ping.h"
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
struct cu_data {
int cu_fd; /* connections fd */
bool_t cu_closeit; /* opened by library */
struct sockaddr_storage cu_raddr; /* remote address */
int cu_rlen;
struct timeval cu_wait; /* retransmit interval */
struct timeval cu_total; /* total time for the call */
struct rpc_err cu_error;
XDR cu_outxdrs;
u_int cu_xdrpos;
u_int cu_sendsz; /* send size */
char *cu_outbuf;
u_int cu_recvsz; /* recv size */
struct pollfd pfdp;
int cu_async;
char cu_inbuf[1];
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
};
/*
* pmap_getport.c
* Client interface to pmap rpc service.
*
* Copyright (C) 1984, Sun Microsystems, Inc.
*/
static struct timeval timeout = { 1, 0 };
static struct timeval tottimeout = { 1, 0 };
/*
* Find the mapped port for program,version.
* Calls the pmap service remotely to do the lookup.
* Returns 0 if no map exists.
*/
static u_short
__pmap_getport(address, program, version, protocol)
struct sockaddr_in *address;
u_long program;
u_long version;
u_int protocol;
{
u_short port = 0;
int sock = -1;
register CLIENT *client;
struct pmap parms;
address->sin_port = htons(PMAPPORT);
client = clntudp_bufcreate(address, PMAPPROG,
PMAPVERS, timeout, &sock, RPCSMALLMSGSIZE, RPCSMALLMSGSIZE);
if (client != (CLIENT *)NULL) {
parms.pm_prog = program;
parms.pm_vers = version;
parms.pm_prot = protocol;
parms.pm_port = 0; /* not needed or used */
if (CLNT_CALL(client, PMAPPROC_GETPORT, xdr_pmap, &parms,
xdr_u_short, &port, tottimeout) != RPC_SUCCESS){
rpc_createerr.cf_stat = RPC_PMAPFAILURE;
clnt_geterr(client, &rpc_createerr.cf_error);
} else if (port == 0) {
rpc_createerr.cf_stat = RPC_PROGNOTREGISTERED;
}
CLNT_DESTROY(client);
}
if (sock != -1)
(void)close(sock);
address->sin_port = 0;
return (port);
}
/*
* Transmit to YPPROC_DOMAIN_NONACK, return immediately.
*/
static bool_t *
ypproc_domain_nonack_2_send(domainname *argp, CLIENT *clnt)
{
static bool_t clnt_res;
struct timeval TIMEOUT = { 0, 0 };
memset((char *)&clnt_res, 0, sizeof (clnt_res));
if (clnt_call(clnt, YPPROC_DOMAIN_NONACK,
(xdrproc_t) xdr_domainname, (caddr_t) argp,
(xdrproc_t) xdr_bool, (caddr_t) &clnt_res,
TIMEOUT) != RPC_SUCCESS) {
return (NULL);
}
return (&clnt_res);
}
/*
* Receive response from YPPROC_DOMAIN_NONACK asynchronously.
*/
static bool_t *
ypproc_domain_nonack_2_recv(domainname *argp, CLIENT *clnt)
{
static bool_t clnt_res;
struct timeval TIMEOUT = { 0, 0 };
memset((char *)&clnt_res, 0, sizeof (clnt_res));
if (clnt_call(clnt, YPPROC_DOMAIN_NONACK,
(xdrproc_t) NULL, (caddr_t) argp,
(xdrproc_t) xdr_bool, (caddr_t) &clnt_res,
TIMEOUT) != RPC_SUCCESS) {
return (NULL);
}
return (&clnt_res);
}
/*
* "We have the machine that goes 'ping!'" -- Monty Python
*
* This function blasts packets at the YPPROC_DOMAIN_NONACK procedures
* of the NIS servers listed in restricted_addrs structure.
* Whoever replies the fastest becomes our chosen server.
*
* Note: THIS IS NOT A BROADCAST OPERATION! We could use clnt_broadcast()
* for this, but that has the following problems:
* - We only get the address of the machine that replied in the
* 'eachresult' callback, and on multi-homed machines this can
* lead to confusion.
* - clnt_broadcast() only transmits to local networks, whereas with
* NIS+ you can have a perfectly good server located anywhere on or
* off the local network.
* - clnt_broadcast() blocks for an arbitrary amount of time which the
* caller can't control -- we want to avoid that.
*
* Also note that this has nothing to do with the NIS_PING procedure used
* for replica updates.
*/
struct ping_req {
struct sockaddr_in sin;
unsigned long xid;
};
int __yp_ping(restricted_addrs, cnt, dom, port)
struct in_addr *restricted_addrs;
int cnt;
char *dom;
short *port;
{
struct timeval tv = { 5, 0 };
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
struct ping_req **reqs;
unsigned long i;
int async;
struct sockaddr_in sin, *any = NULL;
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
int winner = -1;
time_t xid_seed, xid_lookup;
int sock, dontblock = 1;
CLIENT *clnt;
char *foo = dom;
struct cu_data *cu;
int validsrvs = 0;
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
/* Set up handles. */
reqs = calloc(1, sizeof(struct ping_req *) * cnt);
xid_seed = time(NULL) ^ getpid();
for (i = 0; i < cnt; i++) {
bzero((char *)&sin, sizeof(sin));
sin.sin_family = AF_INET;
bcopy((char *)&restricted_addrs[i],
(char *)&sin.sin_addr, sizeof(struct in_addr));
sin.sin_port = htons(__pmap_getport(&sin, YPPROG,
YPVERS, IPPROTO_UDP));
if (sin.sin_port == 0)
continue;
reqs[i] = calloc(1, sizeof(struct ping_req));
bcopy((char *)&sin, (char *)&reqs[i]->sin, sizeof(sin));
any = &reqs[i]->sin;
reqs[i]->xid = xid_seed;
xid_seed++;
validsrvs++;
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
}
/* Make sure at least one server was assigned */
if (!validsrvs) {
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
free(reqs);
return(-1);
}
/* Create RPC handle */
sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
clnt = clntudp_create(any, YPPROG, YPVERS, tv, &sock);
if (clnt == NULL) {
close(sock);
for (i = 0; i < cnt; i++)
if (reqs[i] != NULL)
free(reqs[i]);
free(reqs);
return(-1);
}
clnt->cl_auth = authunix_create_default();
cu = (struct cu_data *)clnt->cl_private;
tv.tv_sec = 0;
Bring in a hybrid of SunSoft's transport-independent RPC (TI-RPC) and associated changes that had to happen to make this possible as well as bugs fixed along the way. Bring in required TLI library routines to support this. Since we don't support TLI we've essentially copied what NetBSD has done, adding a thin layer to emulate direct the TLI calls into BSD socket calls. This is mostly from Sun's tirpc release that was made in 1994, however some fixes were backported from the 1999 release (supposedly only made available after this porting effort was underway). The submitter has agreed to continue on and bring us up to the 1999 release. Several key features are introduced with this update: Client calls are thread safe. (1999 code has server side thread safe) Updated, a more modern interface. Many userland updates were done to bring the code up to par with the recent RPC API. There is an update to the pthreads library, a function pthread_main_np() was added to emulate a function of Sun's threads library. While we're at it, bring in NetBSD's lockd, it's been far too long of a wait. New rpcbind(8) replaces portmap(8) (supporting communication over an authenticated Unix-domain socket, and by default only allowing set and unset requests over that channel). It's much more secure than the old portmapper. Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded to support TI-RPC and to support IPV6. Umount(8) is also fixed to unmount pathnames longer than 80 chars, which are currently truncated by the Kernel statfs structure. Submitted by: Martin Blapp <mb@imp.ch> Manpage review: ru Secure RPC implemented by: wpaul
2001-03-19 12:50:13 +00:00
clnt_control(clnt, CLSET_TIMEOUT, (char *)&tv);
async = TRUE;
clnt_control(clnt, CLSET_ASYNC, (char *)&async);
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
ioctl(sock, FIONBIO, &dontblock);
/* Transmit */
for (i = 0; i < cnt; i++) {
if (reqs[i] != NULL) {
clnt_control(clnt, CLSET_XID, (char *)&reqs[i]->xid);
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
bcopy((char *)&reqs[i]->sin, (char *)&cu->cu_raddr,
sizeof(struct sockaddr_in));
ypproc_domain_nonack_2_send(&foo, clnt);
}
}
/* Receive reply */
ypproc_domain_nonack_2_recv(&foo, clnt);
/* Got a winner -- look him up. */
clnt_control(clnt, CLGET_XID, (char *)&xid_lookup);
This commit adds support to ypbind(8) for binding to non-local servers. The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind) only selects servers based on whether or not they respond to clnt_broadcast(). Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits for answers; whichever server answers first is the one ypbind uses for the local client binding. This mechanism fails when binding across subnets is desired. In order for a client on one subnet to bind to a server on another subnet, the gateway(s) between the client and server must be configured to forward broadcasts. If this is not possible, then a slave server must be installed on the remote subnet. If this is also not possible, you have to force the client to bind to the remote server with ypset(8). Unfortunately, this last option is less than ideal. If the remote server becomes unavailable, ypbind(8) will lose its binding and revert to its broadcast-based search behavior. Even if there are other servers available, or even if the original server comes back up, ypbind(8) will not be able to create a new binding since all the servers are on remote subnets where its broadcasts won't be heard. If the administrator isn't around to run ypset(8) again, the system is hosed. In some Linux NIS implementations, there exists a yp.conf file where you can explicitly specify a server address and avoid the use of ypbind altogether. This is not desireable since it removes the possibility of binding to an alternate server in the event that the one specified in yp.conf crashes. Some people have mentioned to me how they though the 'restricted mode' operation (using the -S flag) could be used as a solution for this problem since it allows one to specify a list of servers. In fact, this is not the case: the -S flag just tells ypbind(8) that when it listens for replies to its broadcasts, it should only honor them if the replying hosts appear in the specified restricted list. This behavior has now been changed. If you use the -m flag in conjunction with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast for choosing a server. In many-cast mode, ypbind(8) will transmit directly to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in the restricted mode list and then wait for a reply. As with the broadcast method, whichever server from the list answers first is used for the local binding. All other behavior is the same: ypbind(8) continues to ping its bound server every 60 seconds to insure it's still alive and will many-cast again if the server fails to respond. The code used to achieve this is in yp_ping.c; it includes a couple of modified RPC library routines. Note that it is not possible to use this mechanism without using the restricted list since we need to know the addresses of the available NIS servers ahead of time in order to transmit to them. Most-recently-requested by: Tom Samplonius
1997-05-25 19:49:33 +00:00
for (i = 0; i < cnt; i++) {
if (reqs[i] != NULL && reqs[i]->xid == xid_lookup) {
winner = i;
*port = reqs[i]->sin.sin_port;
}
}
/* Shut everything down */
auth_destroy(clnt->cl_auth);
clnt_destroy(clnt);
close(sock);
for (i = 0; i < cnt; i++)
if (reqs[i] != NULL)
free(reqs[i]);
free(reqs);
return(winner);
}