d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
eea6ab027a
freebsd-nq/sys/arm/conf/HL201

153 lines
4.8 KiB
Plaintext
Raw Normal View History

Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope)
2014-01-22 22:01:29 +00:00
# Kernel configuration for the AT91SAM9G20 based Hot-e configuration file
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
Strip trailing whitespace.
2012-06-13 04:40:29 +00:00
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
# in NOTES.
#
# $FreeBSD$
Omit from the universe build all config files tagged with #NO_UNIVERSE. Many of these config files are important examples, but add little to no regresive value to the intended purpose of UNIVERSE. We now build over 120 kernels during universe. There's really little to no value to this over building say 60 or even 30 of them (either is still a way too big number). This is especially true for kernels that are nothing more than including a common base and adding a static DTB file. Start by pruning 1/3 of the arm kernels that add little regresion value.
2014-04-30 18:02:10 +00:00
#NO_UNIVERSE
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
ident HL201
Clean up the ARM kernel configs to use 'include<space><tab>"file"'.
2015-05-07 12:38:23 +00:00
include "std.arm"
include "../at91/std.hl201"
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
makeoptions MODULES_OVERRIDE=""
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
In the TCP stack, the hhook(9) framework provides hooks for kernel modules to add actions that run when a TCP frame is sent or received on a TCP session in the ESTABLISHED state. In the base tree, this functionality is only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd, and cc_vegas congestion control modules. Presently, we incur overhead to check for hooks each time a TCP frame is sent or received on an ESTABLISHED TCP session. This change adds a new compile-time option (TCP_HHOOK) to determine whether to include the hhook(9) framework for TCP. To retain backwards compatibility, I added the TCP_HHOOK option to every configuration file that already defined "options INET". (Therefore, this patch introduces no functional change. In order to see a functional difference, you need to compile a custom kernel without the TCP_HHOOK option.) This change will allow users to easily exclude this functionality from their kernel, should they wish to do so. Note that any users who use a custom kernel configuration and use one of the congestion control modules listed above will need to add the TCP_HHOOK option to their kernel configuration. Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only) Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
options TCP_HHOOK # hhook(9) framework for TCP
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options FFS # Berkeley Fast Filesystem
#options SOFTUPDATES # Enable FFS soft updates support
#options UFS_ACL # Support for access control lists
#options UFS_DIRHASH # Improve performance on big directories
#options MD_ROOT # MD is a potential root device
Add nand device and NANDFS into the mix for those boards that have support for it at the moment.
2014-01-19 18:09:00 +00:00
#options MD_ROOT_SIZE=4096 # 4MB ram disk
options NANDFS # NAND file system
Remove "New" label from NFSCL/NFSD now that they are the only NFS client/server. While here, remove duplicate NFSCL from sys/conf/NOTES. Approved by: rmacklem
2015-01-06 16:15:57 +00:00
options NFSCL # Network Filesystem Client
#options NFSD # Network Filesystem Server
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
#options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCL
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options TMPFS # Efficient memory filesystem
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
#options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
#options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
options GEOM_PART_BSD # BSD partition scheme
options GEOM_PART_MBR # MBR partition scheme
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
#options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
# NFS root from boopt/dhcp
#options BOOTP
#options BOOTP_NFSROOT
#options BOOTP_COMPAT
#options BOOTP_NFSV3
Add support for RMII in macb, cribbed slightly from the ate driver. This is taken from the MAC at boot, but can be overridden with 'options AT91_MACB_USE_RMII'. Switch to macb for HL201 and SAM9G20EK boards. It now works both places. Also start to sneak up on FDT for the SAM9G20EK board, but leave disabled due to issues with MMC that haven't been resolved. Add early debug support for the SAM9G20EK since that is required for FDT to work presently on these SoC.
2015-11-07 20:02:07 +00:00
#options BOOTP_WIRED_TO=macb0
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\"
# kernel/memory size reduction
options MUTEX_NOINLINE
options NO_FFS_SNAPSHOT
options NO_SWAPPING
options RWLOCK_NOINLINE
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# Ethernet
device mii # Minimal MII support
Add support for RMII in macb, cribbed slightly from the ate driver. This is taken from the MAC at boot, but can be overridden with 'options AT91_MACB_USE_RMII'. Switch to macb for HL201 and SAM9G20EK boards. It now works both places. Also start to sneak up on FDT for the SAM9G20EK board, but leave disabled due to issues with MMC that haven't been resolved. Add early debug support for the SAM9G20EK since that is required for FDT to work presently on these SoC.
2015-11-07 20:02:07 +00:00
device macb # Atmel AT91 Ethernet driver
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
device lxtphy
# I2C
device at91_twi # Atmel AT91 Two-wire Interface
device iic # I2C generic I/O device driver
device iicbus # I2C bus system
# DataFlash
device at91_spi # Atmel AT91 Serial Peripheral Interface
device spibus # SPI bus
device at45d # Atmel AT45D
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device md # Memory "disks"
# SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
device da # Direct Access (disks)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
# Serial (COM) ports
device uart # Multi-uart driver
Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope)
2014-01-22 22:01:29 +00:00
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
# USB support
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
device ohci # OHCI USB interface
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
# USB Ethernet, requires miibus
device miibus
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
Convert the HL201 config file to use FDT.
2014-08-17 16:53:10 +00:00
#device udav # Davicom DM9601E USB
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
# USB Wireless
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
#device rum # Ralink Technology RT2501USB wireless NICs
#device uath # Atheros AR5523 wireless NICs
#device ural # Ralink Technology RT2500USB wireless NICs
#device zyd # ZyDAS zd1211/zd1211b wireless NICs
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware.
2010-07-14 00:48:53 +00:00
# Wireless NIC cards
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # AMRR transmit rate control algorithm
fix the kernel files to match our standard "option<space><tab>" format such that when commenting/uncommentting lines, horizontal spacing is maintained... Also fix some minor comment formatting to line things up, etc... Reviewed by: gnn, imp MFC after: 1 week
2012-09-16 19:48:48 +00:00
options ROOTDEVNAME=\"ufs:da0s1a\"
Back out r253779 & r253786.
2013-07-31 17:21:18 +00:00
Pass over the at91 kernels to reduce the diff between them.
2015-05-09 21:24:55 +00:00
# watchdog
device at91_wdt # Atmel AT91 Watchdog Timer
Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope)
2014-01-22 22:01:29 +00:00
# NAND Flash - my board as 128MB Samsung part, YMMV.
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device nand # NAND interface on CS3
Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope)
2014-01-22 22:01:29 +00:00
# Coming soon, but not yet
Convert the HL201 config file to use FDT.
2014-08-17 16:53:10 +00:00
options FDT
options FDT_DTB_STATIC
makeoptions FDT_DTS_FILE=hl201.dts
Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope)
2014-01-22 22:01:29 +00:00
options EARLY_PRINTF
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
options SOCDEV_PA=0xfc000000
Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope)
2014-01-22 22:01:29 +00:00
options SOCDEV_VA=0xdc000000
Reference in New Issue Copy Permalink