freebsd-nq/share/man/man4/urtwn.4

153 lines
4.2 KiB
Groff
Raw Normal View History

.\" Copyright (c) 2010 Damien Bergamini <damien.bergamini@free.fr>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.\" $FreeBSD$
.\"
.Dd October 31, 2013
.Dt URTWN 4
.Os
.Sh NAME
.Nm urtwn
.Nd Realtek RTL8188CU/RTL8192CU USB IEEE 802.11b/g/n wireless network device
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device ehci"
.Cd "device uhci"
.Cd "device ohci"
.Cd "device usb"
.Cd "device urtwn"
.Cd "device wlan"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
if_urtwn_load="YES"
.Ed
.Pp
In both cases, place the following line in
.Xr loader.conf 5
to acknowledge the firmware license (see below):
.Bd -literal -offset indent
legal.realtek.license_ack=1
.Ed
.Sh DESCRIPTION
The
.Nm
driver supports USB 2.0 wireless network devices based on Realtek
RTL8188CUS, RTL8188CE-VAU, RTL8188RU and RTL8192CU chipsets.
.Pp
The RTL8188CUS is a highly integrated 802.11n adapter that combines
a MAC, a 1T1R capable baseband and an RF in a single chip.
It operates in the 2GHz spectrum only.
The RTL8188RU is a high-power variant of the RTL8188CUS.
The RTL8188CE-VAU is a PCI Express Mini Card adapter that attaches
to the USB interface.
.Pp
The RTL8192CU is a highly integrated multiple-in, multiple-out (MIMO)
802.11n adapter that combines a MAC, a 2T2R capable baseband and an
RF in a single chip.
It operates in the 2GHz spectrum only.
.Pp
This driver requires the firmware built with the
.Nm urtwnfw
module to work.
For the loaded firmware to be enabled for use the license at
.Pa /usr/share/doc/legal/realtek
must be agreed by adding the following line to
.Xr loader.conf 5 :
.Pp
.Dl "legal.realtek.license_ack=1"
.Sh FILES
.Bl -tag -width ".Pa /usr/share/doc/legal/realtek" -compact
.It Pa /usr/share/doc/legal/realtek
.Nm
firmware license
.El
.Sh HARDWARE
The following adapters should work:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It Belkin F7D1102 Surf Wireless Micro
2013-06-25 06:43:04 +00:00
.It D-Link DWA-131
.It Edimax EW-7811Un
.It Netgear WNA1000M
.It Realtek RTL8192CU
.It Realtek RTL8188CUS
.El
.Sh EXAMPLES
Join an existing BSS network (i.e., connect to an access point):
.Bd -literal -offset indent
ifconfig wlan create wlandev urtwn0 inet 192.168.0.20 \e
netmask 0xffffff00
.Ed
.Pp
Join a specific BSS network with network name
.Dq Li my_net :
.Pp
.Dl "ifconfig wlan create wlandev urtwn0 ssid my_net up"
.Pp
Join a specific BSS network with 64-bit WEP encryption:
.Bd -literal -offset indent
ifconfig wlan create wlandev urtwn0 ssid my_net \e
wepmode on wepkey 0x1234567890 weptxkey 1 up
.Ed
.Sh DIAGNOSTICS
.Bl -diag
.It "urtwn%d: error %d, could not read firmware %s"
For some reason, the driver was unable to read the microcode file from the
filesystem.
The file might be missing or corrupted.
.It "urtwn%d: device timeout"
A frame dispatched to the hardware for transmission did not complete in time.
The driver will reset the hardware.
This should not happen.
.El
.Sh SEE ALSO
.Xr urtwnfw 4 ,
.Xr intro 4 ,
.Xr netintro 4 ,
.Xr usb 4 ,
.Xr wlan 4 ,
.Xr wlan_ccmp 4 ,
.Xr wlan_tkip 4 ,
.Xr wlan_wep 4 ,
2013-06-08 18:25:08 +00:00
.Xr ifconfig 8 ,
.Xr wpa_supplicant 8
.Rs
.%T Realtek
.%U http://www.realtek.com.tw
.Re
.Sh HISTORY
The
.Nm
driver first appeared in
2013-06-08 18:25:08 +00:00
.Ox 4.9
and
.Fx 10.0 .
.Sh AUTHORS
The
.Nm
driver was written by
.An Damien Bergamini Aq damien@openbsd.org .
.Sh CAVEATS
The
.Nm
driver does not support any of the 802.11n capabilities offered by the
adapters.