freebsd-nq/include/libzfs.h

910 lines
32 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
* Copyright (c) 2011, 2017 by Delphix. All rights reserved.
* Copyright (c) 2012, Joyent, Inc. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
* Copyright (c) 2016, Intel Corporation.
* Copyright 2016 Nexenta Systems, Inc.
* Copyright (c) 2017 Datto Inc.
* Copyright (c) 2017 Open-E, Inc. All Rights Reserved.
2008-11-20 20:01:55 +00:00
*/
#ifndef _LIBZFS_H
#define _LIBZFS_H
#include <assert.h>
#include <libnvpair.h>
2009-01-15 21:59:39 +00:00
#include <sys/mnttab.h>
2008-11-20 20:01:55 +00:00
#include <sys/param.h>
#include <sys/types.h>
#include <sys/varargs.h>
#include <sys/fs/zfs.h>
#include <sys/avl.h>
#include <ucred.h>
#include <libzfs_core.h>
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
extern "C" {
#endif
/*
* Miscellaneous ZFS constants
*/
#define ZFS_MAXPROPLEN MAXPATHLEN
#define ZPOOL_MAXPROPLEN MAXPATHLEN
/*
* Default device paths
*/
2012-10-17 23:58:54 +00:00
#define DISK_ROOT "/dev"
#define UDISK_ROOT "/dev/disk"
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
#define ZVOL_ROOT "/dev/zvol"
/*
* Default wait time for a device name to be created.
*/
#define DISK_LABEL_WAIT (30 * 1000) /* 30 seconds */
Fix 'zpool import' detection issues This patch addresses multiple 'zpool import' block device indentification problems which are most likely to occur on a system configured to use blkid, by_vdev paths, multipath and failover. The symptom most commonly observed is the import uses different path names to import the pool than would normally be expected. * When using blkid to identify vdevs the listed devices may be added to the cache in any order. In order to apply the preferred search order heuristic a zfs_path_order() function was added to calculate the order given full path names. * Since it's possible to have multiple block devices with different vdev guids which refer to the same ZPOOL_CONFIG_PATH the slice cache must be indexed by guid and name. By avoiding collisions the preferred ordering can be maintaining even when multiple block devices claim the same ZPOOL_CONFIG_PATH. The preferred sorting by partition was never benefitial for a Linux system and was removed as part of this change. * When adding entries to the blkid cache avl_find/avl_insert are used instead of avl_add because collisions are possible and must be handled gracefully. * For pools using multipath devices there are, at a minimum, three devices where a vdev label may be read. They are the dm-* device and each underlying /dev/sd* device. Due to the way the block cache is implemented each of these devices may have a different cached copy of the vdev label. This can result in "ghost pools" which appear to persist even after a 'zpool labelclear' has been done to the dm-* device. In order to prevent this the vdev label is read with O_DIRECT in order to bypass any caching to get the on-disk version. * When opening a block device verify that vdev guid read from the disk matches the expected vdev guid. This allows for bad labels to be filtered out. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5359
2016-11-07 18:28:57 +00:00
#define IMPORT_ORDER_PREFERRED_1 1
#define IMPORT_ORDER_PREFERRED_2 2
#define IMPORT_ORDER_SCAN_OFFSET 10
#define IMPORT_ORDER_DEFAULT 100
#define DEFAULT_IMPORT_PATH_SIZE 9
2012-10-17 23:58:54 +00:00
extern char *zpool_default_import_path[DEFAULT_IMPORT_PATH_SIZE];
2008-11-20 20:01:55 +00:00
/*
* libzfs errors
*/
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
typedef enum zfs_error {
EZFS_SUCCESS = 0, /* no error -- success */
2008-11-20 20:01:55 +00:00
EZFS_NOMEM = 2000, /* out of memory */
EZFS_BADPROP, /* invalid property value */
EZFS_PROPREADONLY, /* cannot set readonly property */
EZFS_PROPTYPE, /* property does not apply to dataset type */
EZFS_PROPNONINHERIT, /* property is not inheritable */
EZFS_PROPSPACE, /* bad quota or reservation */
EZFS_BADTYPE, /* dataset is not of appropriate type */
EZFS_BUSY, /* pool or dataset is busy */
EZFS_EXISTS, /* pool or dataset already exists */
EZFS_NOENT, /* no such pool or dataset */
EZFS_BADSTREAM, /* bad backup stream */
EZFS_DSREADONLY, /* dataset is readonly */
EZFS_VOLTOOBIG, /* volume is too large for 32-bit system */
EZFS_INVALIDNAME, /* invalid dataset name */
EZFS_BADRESTORE, /* unable to restore to destination */
EZFS_BADBACKUP, /* backup failed */
EZFS_BADTARGET, /* bad attach/detach/replace target */
EZFS_NODEVICE, /* no such device in pool */
EZFS_BADDEV, /* invalid device to add */
EZFS_NOREPLICAS, /* no valid replicas */
EZFS_RESILVERING, /* currently resilvering */
EZFS_BADVERSION, /* unsupported version */
EZFS_POOLUNAVAIL, /* pool is currently unavailable */
EZFS_DEVOVERFLOW, /* too many devices in one vdev */
EZFS_BADPATH, /* must be an absolute path */
EZFS_CROSSTARGET, /* rename or clone across pool or dataset */
EZFS_ZONED, /* used improperly in local zone */
EZFS_MOUNTFAILED, /* failed to mount dataset */
EZFS_UMOUNTFAILED, /* failed to unmount dataset */
EZFS_UNSHARENFSFAILED, /* unshare(1M) failed */
EZFS_SHARENFSFAILED, /* share(1M) failed */
EZFS_PERM, /* permission denied */
EZFS_NOSPC, /* out of space */
EZFS_FAULT, /* bad address */
2008-11-20 20:01:55 +00:00
EZFS_IO, /* I/O error */
EZFS_INTR, /* signal received */
EZFS_ISSPARE, /* device is a hot spare */
EZFS_INVALCONFIG, /* invalid vdev configuration */
EZFS_RECURSIVE, /* recursive dependency */
EZFS_NOHISTORY, /* no history object */
EZFS_POOLPROPS, /* couldn't retrieve pool props */
EZFS_POOL_NOTSUP, /* ops not supported for this type of pool */
EZFS_POOL_INVALARG, /* invalid argument for this pool operation */
EZFS_NAMETOOLONG, /* dataset name is too long */
EZFS_OPENFAILED, /* open of device failed */
EZFS_NOCAP, /* couldn't get capacity */
EZFS_LABELFAILED, /* write of label failed */
EZFS_BADWHO, /* invalid permission who */
EZFS_BADPERM, /* invalid permission */
EZFS_BADPERMSET, /* invalid permission set name */
EZFS_NODELEGATION, /* delegated administration is disabled */
EZFS_UNSHARESMBFAILED, /* failed to unshare over smb */
EZFS_SHARESMBFAILED, /* failed to share over smb */
EZFS_BADCACHE, /* bad cache file */
EZFS_ISL2CACHE, /* device is for the level 2 ARC */
EZFS_VDEVNOTSUP, /* unsupported vdev type */
EZFS_NOTSUP, /* ops not supported on this dataset */
EZFS_ACTIVE_SPARE, /* pool has active shared spare devices */
2009-07-02 22:44:48 +00:00
EZFS_UNPLAYED_LOGS, /* log device has unplayed logs */
2009-08-18 18:43:27 +00:00
EZFS_REFTAG_RELE, /* snapshot release: tag not found */
EZFS_REFTAG_HOLD, /* snapshot hold: tag already exists */
EZFS_TAGTOOLONG, /* snapshot hold/rele: tag too long */
EZFS_PIPEFAILED, /* pipe create failed */
EZFS_THREADCREATEFAILED, /* thread create failed */
EZFS_POSTSPLIT_ONLINE, /* onlining a disk after splitting it */
EZFS_SCRUBBING, /* currently scrubbing */
EZFS_NO_SCRUB, /* no active scrub */
EZFS_DIFF, /* general failure of zfs diff */
EZFS_DIFFDATA, /* bad zfs diff data */
EZFS_POOLREADONLY, /* pool is in read-only mode */
EZFS_SCRUB_PAUSED, /* scrub currently paused */
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
EZFS_ACTIVE_POOL, /* pool is imported on a different system */
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
EZFS_CRYPTOFAILED, /* failed to setup encryption */
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
EZFS_NO_PENDING, /* cannot cancel, no operation is pending */
2008-11-20 20:01:55 +00:00
EZFS_UNKNOWN
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
} zfs_error_t;
2008-11-20 20:01:55 +00:00
/*
* The following data structures are all part
* of the zfs_allow_t data structure which is
* used for printing 'allow' permissions.
* It is a linked list of zfs_allow_t's which
* then contain avl tree's for user/group/sets/...
* and each one of the entries in those trees have
* avl tree's for the permissions they belong to and
* whether they are local,descendent or local+descendent
* permissions. The AVL trees are used primarily for
* sorting purposes, but also so that we can quickly find
* a given user and or permission.
*/
typedef struct zfs_perm_node {
avl_node_t z_node;
char z_pname[MAXPATHLEN];
} zfs_perm_node_t;
typedef struct zfs_allow_node {
avl_node_t z_node;
char z_key[MAXPATHLEN]; /* name, such as joe */
avl_tree_t z_localdescend; /* local+descendent perms */
avl_tree_t z_local; /* local permissions */
avl_tree_t z_descend; /* descendent permissions */
} zfs_allow_node_t;
typedef struct zfs_allow {
struct zfs_allow *z_next;
char z_setpoint[MAXPATHLEN];
avl_tree_t z_sets;
avl_tree_t z_crperms;
avl_tree_t z_user;
avl_tree_t z_group;
avl_tree_t z_everyone;
} zfs_allow_t;
/*
* Basic handle types
*/
typedef struct zfs_handle zfs_handle_t;
typedef struct zpool_handle zpool_handle_t;
typedef struct libzfs_handle libzfs_handle_t;
/*
* Library initialization
*/
extern libzfs_handle_t *libzfs_init(void);
extern void libzfs_fini(libzfs_handle_t *);
extern libzfs_handle_t *zpool_get_handle(zpool_handle_t *);
extern libzfs_handle_t *zfs_get_handle(zfs_handle_t *);
extern void libzfs_print_on_error(libzfs_handle_t *, boolean_t);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern void zfs_save_arguments(int argc, char **, char *, int);
extern int zpool_log_history(libzfs_handle_t *, const char *);
2008-11-20 20:01:55 +00:00
extern int libzfs_errno(libzfs_handle_t *);
extern const char *libzfs_error_init(int);
2008-11-20 20:01:55 +00:00
extern const char *libzfs_error_action(libzfs_handle_t *);
extern const char *libzfs_error_description(libzfs_handle_t *);
extern int zfs_standard_error(libzfs_handle_t *, int, const char *);
2009-01-15 21:59:39 +00:00
extern void libzfs_mnttab_init(libzfs_handle_t *);
extern void libzfs_mnttab_fini(libzfs_handle_t *);
2009-07-02 22:44:48 +00:00
extern void libzfs_mnttab_cache(libzfs_handle_t *, boolean_t);
2009-01-15 21:59:39 +00:00
extern int libzfs_mnttab_find(libzfs_handle_t *, const char *,
struct mnttab *);
extern void libzfs_mnttab_add(libzfs_handle_t *, const char *,
const char *, const char *);
extern void libzfs_mnttab_remove(libzfs_handle_t *, const char *);
2008-11-20 20:01:55 +00:00
/*
* Basic handle functions
*/
extern zpool_handle_t *zpool_open(libzfs_handle_t *, const char *);
extern zpool_handle_t *zpool_open_canfail(libzfs_handle_t *, const char *);
extern void zpool_close(zpool_handle_t *);
extern const char *zpool_get_name(zpool_handle_t *);
extern int zpool_get_state(zpool_handle_t *);
extern const char *zpool_state_to_name(vdev_state_t, vdev_aux_t);
extern const char *zpool_pool_state_to_name(pool_state_t);
extern void zpool_free_handles(libzfs_handle_t *);
2008-11-20 20:01:55 +00:00
/*
* Iterate over all active pools in the system.
*/
typedef int (*zpool_iter_f)(zpool_handle_t *, void *);
extern int zpool_iter(libzfs_handle_t *, zpool_iter_f, void *);
extern boolean_t zpool_skip_pool(const char *);
2008-11-20 20:01:55 +00:00
/*
* Functions to create and destroy pools
*/
extern int zpool_create(libzfs_handle_t *, const char *, nvlist_t *,
nvlist_t *, nvlist_t *);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern int zpool_destroy(zpool_handle_t *, const char *);
2008-11-20 20:01:55 +00:00
extern int zpool_add(zpool_handle_t *, nvlist_t *);
typedef struct splitflags {
/* do not split, but return the config that would be split off */
int dryrun : 1;
/* after splitting, import the pool */
int import : 1;
int name_flags;
} splitflags_t;
2008-11-20 20:01:55 +00:00
/*
* Functions to manipulate pool and vdev state
*/
extern int zpool_scan(zpool_handle_t *, pool_scan_func_t, pool_scrub_cmd_t);
extern int zpool_clear(zpool_handle_t *, const char *, nvlist_t *);
extern int zpool_reguid(zpool_handle_t *);
extern int zpool_reopen_one(zpool_handle_t *, void *);
2008-11-20 20:01:55 +00:00
extern int zpool_sync_one(zpool_handle_t *, void *);
2008-11-20 20:01:55 +00:00
extern int zpool_vdev_online(zpool_handle_t *, const char *, int,
vdev_state_t *);
extern int zpool_vdev_offline(zpool_handle_t *, const char *, boolean_t);
extern int zpool_vdev_attach(zpool_handle_t *, const char *,
const char *, nvlist_t *, int);
extern int zpool_vdev_detach(zpool_handle_t *, const char *);
extern int zpool_vdev_remove(zpool_handle_t *, const char *);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
extern int zpool_vdev_remove_cancel(zpool_handle_t *);
extern int zpool_vdev_indirect_size(zpool_handle_t *, const char *, uint64_t *);
extern int zpool_vdev_split(zpool_handle_t *, char *, nvlist_t **, nvlist_t *,
splitflags_t);
2008-11-20 20:01:55 +00:00
extern int zpool_vdev_fault(zpool_handle_t *, uint64_t, vdev_aux_t);
extern int zpool_vdev_degrade(zpool_handle_t *, uint64_t, vdev_aux_t);
2008-11-20 20:01:55 +00:00
extern int zpool_vdev_clear(zpool_handle_t *, uint64_t);
extern nvlist_t *zpool_find_vdev(zpool_handle_t *, const char *, boolean_t *,
boolean_t *, boolean_t *);
2009-07-02 22:44:48 +00:00
extern nvlist_t *zpool_find_vdev_by_physpath(zpool_handle_t *, const char *,
boolean_t *, boolean_t *, boolean_t *);
extern int zpool_label_disk_wait(char *, int);
2008-11-20 20:01:55 +00:00
extern int zpool_label_disk(libzfs_handle_t *, zpool_handle_t *, char *);
extern uint64_t zpool_vdev_path_to_guid(zpool_handle_t *zhp, const char *path);
2008-11-20 20:01:55 +00:00
int zfs_dev_is_dm(char *dev_name);
int zfs_dev_is_whole_disk(char *dev_name);
char *zfs_get_underlying_path(char *dev_name);
char *zfs_get_enclosure_sysfs_path(char *dev_name);
const char *zpool_get_state_str(zpool_handle_t *);
2008-11-20 20:01:55 +00:00
/*
* Functions to manage pool properties
*/
extern int zpool_set_prop(zpool_handle_t *, const char *, const char *);
extern int zpool_get_prop(zpool_handle_t *, zpool_prop_t, char *,
size_t proplen, zprop_source_t *, boolean_t literal);
2008-11-20 20:01:55 +00:00
extern uint64_t zpool_get_prop_int(zpool_handle_t *, zpool_prop_t,
zprop_source_t *);
extern const char *zpool_prop_to_name(zpool_prop_t);
extern const char *zpool_prop_values(zpool_prop_t);
/*
* Pool health statistics.
*/
typedef enum {
/*
* The following correspond to faults as defined in the (fault.fs.zfs.*)
* event namespace. Each is associated with a corresponding message ID.
*/
ZPOOL_STATUS_CORRUPT_CACHE, /* corrupt /kernel/drv/zpool.cache */
ZPOOL_STATUS_MISSING_DEV_R, /* missing device with replicas */
ZPOOL_STATUS_MISSING_DEV_NR, /* missing device with no replicas */
ZPOOL_STATUS_CORRUPT_LABEL_R, /* bad device label with replicas */
ZPOOL_STATUS_CORRUPT_LABEL_NR, /* bad device label with no replicas */
ZPOOL_STATUS_BAD_GUID_SUM, /* sum of device guids didn't match */
ZPOOL_STATUS_CORRUPT_POOL, /* pool metadata is corrupted */
ZPOOL_STATUS_CORRUPT_DATA, /* data errors in user (meta)data */
ZPOOL_STATUS_FAILING_DEV, /* device experiencing errors */
ZPOOL_STATUS_VERSION_NEWER, /* newer on-disk version */
ZPOOL_STATUS_HOSTID_MISMATCH, /* last accessed by another system */
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
ZPOOL_STATUS_HOSTID_ACTIVE, /* currently active on another system */
ZPOOL_STATUS_HOSTID_REQUIRED, /* multihost=on and hostid=0 */
ZPOOL_STATUS_IO_FAILURE_WAIT, /* failed I/O, failmode 'wait' */
ZPOOL_STATUS_IO_FAILURE_CONTINUE, /* failed I/O, failmode 'continue' */
ZPOOL_STATUS_IO_FAILURE_MMP, /* failed MMP, failmode not 'panic' */
2009-02-18 20:51:31 +00:00
ZPOOL_STATUS_BAD_LOG, /* cannot read log chain(s) */
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
ZPOOL_STATUS_ERRATA, /* informational errata available */
2009-02-18 20:51:31 +00:00
/*
* If the pool has unsupported features but can still be opened in
* read-only mode, its status is ZPOOL_STATUS_UNSUP_FEAT_WRITE. If the
* pool has unsupported features but cannot be opened at all, its
* status is ZPOOL_STATUS_UNSUP_FEAT_READ.
*/
ZPOOL_STATUS_UNSUP_FEAT_READ, /* unsupported features for read */
ZPOOL_STATUS_UNSUP_FEAT_WRITE, /* unsupported features for write */
2009-02-18 20:51:31 +00:00
/*
* These faults have no corresponding message ID. At the time we are
* checking the status, the original reason for the FMA fault (I/O or
* checksum errors) has been lost.
*/
2008-11-20 20:01:55 +00:00
ZPOOL_STATUS_FAULTED_DEV_R, /* faulted device with replicas */
ZPOOL_STATUS_FAULTED_DEV_NR, /* faulted device with no replicas */
/*
* The following are not faults per se, but still an error possibly
* requiring administrative attention. There is no corresponding
* message ID.
*/
ZPOOL_STATUS_VERSION_OLDER, /* older legacy on-disk version */
ZPOOL_STATUS_FEAT_DISABLED, /* supported features are disabled */
2008-11-20 20:01:55 +00:00
ZPOOL_STATUS_RESILVERING, /* device being resilvered */
ZPOOL_STATUS_OFFLINE_DEV, /* device offline */
2009-08-18 18:43:27 +00:00
ZPOOL_STATUS_REMOVED_DEV, /* removed device */
2008-11-20 20:01:55 +00:00
/*
* Finally, the following indicates a healthy pool.
*/
ZPOOL_STATUS_OK
} zpool_status_t;
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
extern zpool_status_t zpool_get_status(zpool_handle_t *, char **,
zpool_errata_t *);
extern zpool_status_t zpool_import_status(nvlist_t *, char **,
zpool_errata_t *);
extern void zpool_dump_ddt(const ddt_stat_t *dds, const ddt_histogram_t *ddh);
2008-11-20 20:01:55 +00:00
/*
* Statistics and configuration functions.
*/
extern nvlist_t *zpool_get_config(zpool_handle_t *, nvlist_t **);
extern nvlist_t *zpool_get_features(zpool_handle_t *);
2008-11-20 20:01:55 +00:00
extern int zpool_refresh_stats(zpool_handle_t *, boolean_t *);
extern int zpool_get_errlog(zpool_handle_t *, nvlist_t **);
/*
* Import and export functions
*/
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern int zpool_export(zpool_handle_t *, boolean_t, const char *);
extern int zpool_export_force(zpool_handle_t *, const char *);
2008-11-20 20:01:55 +00:00
extern int zpool_import(libzfs_handle_t *, nvlist_t *, const char *,
char *altroot);
extern int zpool_import_props(libzfs_handle_t *, nvlist_t *, const char *,
nvlist_t *, int);
extern void zpool_print_unsup_feat(nvlist_t *config);
2008-11-20 20:01:55 +00:00
/*
* Search for pools to import
*/
typedef struct importargs {
char **path; /* a list of paths to search */
int paths; /* number of paths to search */
char *poolname; /* name of a pool to find */
uint64_t guid; /* guid of a pool to find */
char *cachefile; /* cachefile to use for import */
int can_be_active : 1; /* can the pool be active? */
int unique : 1; /* does 'poolname' already exist? */
int exists : 1; /* set on return if pool already exists */
int scan : 1; /* prefer scanning to libblkid cache */
nvlist_t *policy; /* load policy (max txg, rewind, etc.) */
} importargs_t;
extern nvlist_t *zpool_search_import(libzfs_handle_t *, importargs_t *);
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
extern int zpool_tryimport(libzfs_handle_t *hdl, char *target,
nvlist_t **configp, importargs_t *args);
/* legacy pool search routines */
extern nvlist_t *zpool_find_import(libzfs_handle_t *, int, char **);
2008-11-20 20:01:55 +00:00
extern nvlist_t *zpool_find_import_cached(libzfs_handle_t *, const char *,
char *, uint64_t);
2008-11-20 20:01:55 +00:00
/*
* Miscellaneous pool functions
*/
struct zfs_cmd;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern const char *zfs_history_event_names[];
typedef enum {
VDEV_NAME_PATH = 1 << 0,
VDEV_NAME_GUID = 1 << 1,
VDEV_NAME_FOLLOW_LINKS = 1 << 2,
VDEV_NAME_TYPE_ID = 1 << 3,
} vdev_name_t;
extern char *zpool_vdev_name(libzfs_handle_t *, zpool_handle_t *, nvlist_t *,
int name_flags);
2008-11-20 20:01:55 +00:00
extern int zpool_upgrade(zpool_handle_t *, uint64_t);
extern int zpool_get_history(zpool_handle_t *, nvlist_t **);
extern int zpool_history_unpack(char *, uint64_t, uint64_t *,
nvlist_t ***, uint_t *);
extern int zpool_events_next(libzfs_handle_t *, nvlist_t **, int *, unsigned,
int);
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
extern int zpool_events_clear(libzfs_handle_t *, int *);
extern int zpool_events_seek(libzfs_handle_t *, uint64_t, int);
2008-11-20 20:01:55 +00:00
extern void zpool_obj_to_path(zpool_handle_t *, uint64_t, uint64_t, char *,
size_t len);
extern int zfs_ioctl(libzfs_handle_t *, int, struct zfs_cmd *);
2009-07-02 22:44:48 +00:00
extern int zpool_get_physpath(zpool_handle_t *, char *, size_t);
extern void zpool_explain_recover(libzfs_handle_t *, const char *, int,
nvlist_t *);
2009-07-02 22:44:48 +00:00
2008-11-20 20:01:55 +00:00
/*
* Basic handle manipulations. These functions do not create or destroy the
* underlying datasets, only the references to them.
*/
extern zfs_handle_t *zfs_open(libzfs_handle_t *, const char *, int);
extern zfs_handle_t *zfs_handle_dup(zfs_handle_t *);
2008-11-20 20:01:55 +00:00
extern void zfs_close(zfs_handle_t *);
extern zfs_type_t zfs_get_type(const zfs_handle_t *);
extern const char *zfs_get_name(const zfs_handle_t *);
extern zpool_handle_t *zfs_get_pool_handle(const zfs_handle_t *);
extern const char *zfs_get_pool_name(const zfs_handle_t *);
2008-11-20 20:01:55 +00:00
/*
* Property management functions. Some functions are shared with the kernel,
* and are found in sys/fs/zfs.h.
*/
/*
* zfs dataset property management
*/
extern const char *zfs_prop_default_string(zfs_prop_t);
extern uint64_t zfs_prop_default_numeric(zfs_prop_t);
extern const char *zfs_prop_column_name(zfs_prop_t);
extern boolean_t zfs_prop_align_right(zfs_prop_t);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
extern nvlist_t *zfs_valid_proplist(libzfs_handle_t *, zfs_type_t, nvlist_t *,
uint64_t, zfs_handle_t *, zpool_handle_t *, boolean_t, const char *);
2008-11-20 20:01:55 +00:00
extern const char *zfs_prop_to_name(zfs_prop_t);
extern int zfs_prop_set(zfs_handle_t *, const char *, const char *);
extern int zfs_prop_set_list(zfs_handle_t *, nvlist_t *);
2008-11-20 20:01:55 +00:00
extern int zfs_prop_get(zfs_handle_t *, zfs_prop_t, char *, size_t,
zprop_source_t *, char *, size_t, boolean_t);
extern int zfs_prop_get_recvd(zfs_handle_t *, const char *, char *, size_t,
boolean_t);
2008-11-20 20:01:55 +00:00
extern int zfs_prop_get_numeric(zfs_handle_t *, zfs_prop_t, uint64_t *,
zprop_source_t *, char *, size_t);
2009-07-02 22:44:48 +00:00
extern int zfs_prop_get_userquota_int(zfs_handle_t *zhp, const char *propname,
uint64_t *propvalue);
extern int zfs_prop_get_userquota(zfs_handle_t *zhp, const char *propname,
char *propbuf, int proplen, boolean_t literal);
extern int zfs_prop_get_written_int(zfs_handle_t *zhp, const char *propname,
uint64_t *propvalue);
extern int zfs_prop_get_written(zfs_handle_t *zhp, const char *propname,
char *propbuf, int proplen, boolean_t literal);
extern int zfs_prop_get_feature(zfs_handle_t *zhp, const char *propname,
char *buf, size_t len);
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 18:44:07 +00:00
extern uint64_t getprop_uint64(zfs_handle_t *, zfs_prop_t, char **);
2008-11-20 20:01:55 +00:00
extern uint64_t zfs_prop_get_int(zfs_handle_t *, zfs_prop_t);
extern int zfs_prop_inherit(zfs_handle_t *, const char *, boolean_t);
2008-11-20 20:01:55 +00:00
extern const char *zfs_prop_values(zfs_prop_t);
extern int zfs_prop_is_string(zfs_prop_t prop);
extern nvlist_t *zfs_get_all_props(zfs_handle_t *);
2008-11-20 20:01:55 +00:00
extern nvlist_t *zfs_get_user_props(zfs_handle_t *);
extern nvlist_t *zfs_get_recvd_props(zfs_handle_t *);
extern nvlist_t *zfs_get_clones_nvl(zfs_handle_t *);
2008-11-20 20:01:55 +00:00
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
/*
* zfs encryption management
*/
extern int zfs_crypto_get_encryption_root(zfs_handle_t *, boolean_t *, char *);
extern int zfs_crypto_create(libzfs_handle_t *, char *, nvlist_t *, nvlist_t *,
uint8_t **, uint_t *);
extern int zfs_crypto_clone_check(libzfs_handle_t *, zfs_handle_t *, char *,
nvlist_t *);
extern int zfs_crypto_attempt_load_keys(libzfs_handle_t *, char *);
extern int zfs_crypto_load_key(zfs_handle_t *, boolean_t, char *);
extern int zfs_crypto_unload_key(zfs_handle_t *);
extern int zfs_crypto_rewrap(zfs_handle_t *, nvlist_t *, boolean_t);
2008-11-20 20:01:55 +00:00
typedef struct zprop_list {
int pl_prop;
char *pl_user_prop;
struct zprop_list *pl_next;
boolean_t pl_all;
size_t pl_width;
size_t pl_recvd_width;
2008-11-20 20:01:55 +00:00
boolean_t pl_fixed;
} zprop_list_t;
extern int zfs_expand_proplist(zfs_handle_t *, zprop_list_t **, boolean_t,
boolean_t);
2009-07-02 22:44:48 +00:00
extern void zfs_prune_proplist(zfs_handle_t *, uint8_t *);
2008-11-20 20:01:55 +00:00
#define ZFS_MOUNTPOINT_NONE "none"
#define ZFS_MOUNTPOINT_LEGACY "legacy"
#define ZFS_FEATURE_DISABLED "disabled"
#define ZFS_FEATURE_ENABLED "enabled"
#define ZFS_FEATURE_ACTIVE "active"
#define ZFS_UNSUPPORTED_INACTIVE "inactive"
#define ZFS_UNSUPPORTED_READONLY "readonly"
2008-11-20 20:01:55 +00:00
/*
* zpool property management
*/
extern int zpool_expand_proplist(zpool_handle_t *, zprop_list_t **);
extern int zpool_prop_get_feature(zpool_handle_t *, const char *, char *,
size_t);
2008-11-20 20:01:55 +00:00
extern const char *zpool_prop_default_string(zpool_prop_t);
extern uint64_t zpool_prop_default_numeric(zpool_prop_t);
extern const char *zpool_prop_column_name(zpool_prop_t);
extern boolean_t zpool_prop_align_right(zpool_prop_t);
/*
* Functions shared by zfs and zpool property management.
*/
extern int zprop_iter(zprop_func func, void *cb, boolean_t show_all,
boolean_t ordered, zfs_type_t type);
extern int zprop_get_list(libzfs_handle_t *, char *, zprop_list_t **,
zfs_type_t);
extern void zprop_free_list(zprop_list_t *);
#define ZFS_GET_NCOLS 5
typedef enum {
GET_COL_NONE,
GET_COL_NAME,
GET_COL_PROPERTY,
GET_COL_VALUE,
GET_COL_RECVD,
GET_COL_SOURCE
} zfs_get_column_t;
2008-11-20 20:01:55 +00:00
/*
* Functions for printing zfs or zpool properties
*/
typedef struct zprop_get_cbdata {
int cb_sources;
zfs_get_column_t cb_columns[ZFS_GET_NCOLS];
int cb_colwidths[ZFS_GET_NCOLS + 1];
2008-11-20 20:01:55 +00:00
boolean_t cb_scripted;
boolean_t cb_literal;
boolean_t cb_first;
zprop_list_t *cb_proplist;
zfs_type_t cb_type;
} zprop_get_cbdata_t;
void zprop_print_one_property(const char *, zprop_get_cbdata_t *,
const char *, const char *, zprop_source_t, const char *,
const char *);
2008-11-20 20:01:55 +00:00
/*
* Iterator functions.
*/
typedef int (*zfs_iter_f)(zfs_handle_t *, void *);
extern int zfs_iter_root(libzfs_handle_t *, zfs_iter_f, void *);
extern int zfs_iter_children(zfs_handle_t *, zfs_iter_f, void *);
extern int zfs_iter_dependents(zfs_handle_t *, boolean_t, zfs_iter_f, void *);
extern int zfs_iter_filesystems(zfs_handle_t *, zfs_iter_f, void *);
extern int zfs_iter_snapshots(zfs_handle_t *, boolean_t, zfs_iter_f, void *);
extern int zfs_iter_snapshots_sorted(zfs_handle_t *, zfs_iter_f, void *);
extern int zfs_iter_snapspec(zfs_handle_t *, const char *, zfs_iter_f, void *);
extern int zfs_iter_bookmarks(zfs_handle_t *, zfs_iter_f, void *);
2008-11-20 20:01:55 +00:00
typedef struct get_all_cb {
zfs_handle_t **cb_handles;
size_t cb_alloc;
size_t cb_used;
boolean_t cb_verbose;
int (*cb_getone)(zfs_handle_t *, void *);
} get_all_cb_t;
void libzfs_add_handle(get_all_cb_t *, zfs_handle_t *);
int libzfs_dataset_cmp(const void *, const void *);
2008-11-20 20:01:55 +00:00
/*
* Functions to create and destroy datasets.
*/
extern int zfs_create(libzfs_handle_t *, const char *, zfs_type_t,
nvlist_t *);
extern int zfs_create_ancestors(libzfs_handle_t *, const char *);
2009-08-18 18:43:27 +00:00
extern int zfs_destroy(zfs_handle_t *, boolean_t);
extern int zfs_destroy_snaps(zfs_handle_t *, char *, boolean_t);
extern int zfs_destroy_snaps_nvl(libzfs_handle_t *, nvlist_t *, boolean_t);
2008-11-20 20:01:55 +00:00
extern int zfs_clone(zfs_handle_t *, const char *, nvlist_t *);
extern int zfs_snapshot(libzfs_handle_t *, const char *, boolean_t, nvlist_t *);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern int zfs_snapshot_nvl(libzfs_handle_t *hdl, nvlist_t *snaps,
nvlist_t *props);
2008-11-20 20:01:55 +00:00
extern int zfs_rollback(zfs_handle_t *, zfs_handle_t *, boolean_t);
extern int zfs_rename(zfs_handle_t *, const char *, boolean_t, boolean_t);
typedef struct sendflags {
/* print informational messages (ie, -v was specified) */
boolean_t verbose;
/* recursive send (ie, -R) */
boolean_t replicate;
/* for incrementals, do all intermediate snapshots */
boolean_t doall;
/* if dataset is a clone, do incremental from its origin */
boolean_t fromorigin;
/* do deduplication */
boolean_t dedup;
/* send properties (ie, -p) */
boolean_t props;
/* do not send (no-op, ie. -n) */
boolean_t dryrun;
/* parsable verbose output (ie. -P) */
boolean_t parsable;
/* show progress (ie. -v) */
boolean_t progress;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
/* large blocks (>128K) are permitted */
boolean_t largeblock;
/* WRITE_EMBEDDED records of type DATA are permitted */
boolean_t embed_data;
/* compressed WRITE records are permitted */
boolean_t compress;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
/* raw encrypted records are permitted */
boolean_t raw;
/* only send received properties (ie. -b) */
boolean_t backup;
} sendflags_t;
typedef boolean_t (snapfilter_cb_t)(zfs_handle_t *, void *);
extern int zfs_send(zfs_handle_t *, const char *, const char *,
sendflags_t *, int, snapfilter_cb_t, void *, nvlist_t **);
extern int zfs_send_one(zfs_handle_t *, const char *, int, sendflags_t flags);
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-06 21:22:48 +00:00
extern int zfs_send_resume(libzfs_handle_t *, sendflags_t *, int outfd,
const char *);
extern nvlist_t *zfs_send_resume_token_to_nvlist(libzfs_handle_t *hdl,
const char *token);
2008-11-20 20:01:55 +00:00
extern int zfs_promote(zfs_handle_t *);
extern int zfs_hold(zfs_handle_t *, const char *, const char *,
boolean_t, int);
extern int zfs_hold_nvl(zfs_handle_t *, int, nvlist_t *);
2009-08-18 18:43:27 +00:00
extern int zfs_release(zfs_handle_t *, const char *, const char *, boolean_t);
extern int zfs_get_holds(zfs_handle_t *, nvlist_t **);
extern uint64_t zvol_volsize_to_reservation(uint64_t, nvlist_t *);
2008-11-20 20:01:55 +00:00
2009-07-02 22:44:48 +00:00
typedef int (*zfs_userspace_cb_t)(void *arg, const char *domain,
uid_t rid, uint64_t space);
extern int zfs_userspace(zfs_handle_t *, zfs_userquota_prop_t,
zfs_userspace_cb_t, void *);
extern int zfs_get_fsacl(zfs_handle_t *, nvlist_t **);
extern int zfs_set_fsacl(zfs_handle_t *, boolean_t, nvlist_t *);
2009-07-02 22:44:48 +00:00
2008-11-20 20:01:55 +00:00
typedef struct recvflags {
/* print informational messages (ie, -v was specified) */
boolean_t verbose;
2008-11-20 20:01:55 +00:00
/* the destination is a prefix, not the exact fs (ie, -d) */
boolean_t isprefix;
2008-11-20 20:01:55 +00:00
/*
* Only the tail of the sent snapshot path is appended to the
* destination to determine the received snapshot name (ie, -e).
*/
boolean_t istail;
2008-11-20 20:01:55 +00:00
/* do not actually do the recv, just check if it would work (ie, -n) */
boolean_t dryrun;
2008-11-20 20:01:55 +00:00
/* rollback/destroy filesystems as necessary (eg, -F) */
boolean_t force;
2008-11-20 20:01:55 +00:00
/* set "canmount=off" on all modified filesystems */
boolean_t canmountoff;
2008-11-20 20:01:55 +00:00
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-06 21:22:48 +00:00
/*
* Mark the file systems as "resumable" and do not destroy them if the
* receive is interrupted
*/
boolean_t resumable;
2008-11-20 20:01:55 +00:00
/* byteswap flag is used internally; callers need not specify */
boolean_t byteswap;
2009-02-18 20:51:31 +00:00
/* do not mount file systems as they are extracted (private) */
boolean_t nomount;
2008-11-20 20:01:55 +00:00
} recvflags_t;
extern int zfs_receive(libzfs_handle_t *, const char *, nvlist_t *,
recvflags_t *, int, avl_tree_t *);
2008-11-20 20:01:55 +00:00
typedef enum diff_flags {
ZFS_DIFF_PARSEABLE = 0x1,
ZFS_DIFF_TIMESTAMP = 0x2,
ZFS_DIFF_CLASSIFY = 0x4
} diff_flags_t;
extern int zfs_show_diffs(zfs_handle_t *, int, const char *, const char *,
int);
2008-11-20 20:01:55 +00:00
/*
* Miscellaneous functions.
*/
extern const char *zfs_type_to_name(zfs_type_t);
extern void zfs_refresh_properties(zfs_handle_t *);
extern int zfs_name_valid(const char *, zfs_type_t);
extern zfs_handle_t *zfs_path_to_zhandle(libzfs_handle_t *, char *, zfs_type_t);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
extern int zfs_parent_name(zfs_handle_t *, char *, size_t);
2008-11-20 20:01:55 +00:00
extern boolean_t zfs_dataset_exists(libzfs_handle_t *, const char *,
zfs_type_t);
extern int zfs_spa_version(zfs_handle_t *, int *);
extern boolean_t zfs_bookmark_exists(const char *path);
2012-10-17 23:58:54 +00:00
extern int zfs_append_partition(char *path, size_t max_len);
Add helper functions for manipulating device names This change adds two helper functions for working with vdev names and paths. zfs_resolve_shortname() resolves a shorthand vdev name to an absolute path of a file in /dev, /dev/disk/by-id, /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid, /dev/disk/zpool. This was previously done only in the function is_shorthand_path(), but we need a general helper function to implement shorthand names for additional zpool subcommands like remove. is_shorthand_path() is accordingly updated to call the helper function. There is a minor change in the way zfs_resolve_shortname() tests if a file exists. is_shorthand_path() effectively used open() and stat64() to test for file existence, since its scope includes testing if a device is a whole disk and collecting file status information. zfs_resolve_shortname(), on the other hand, only uses access() to test for existence and leaves it to the caller to perform any additional file operations. This seemed like the most general and lightweight approach, and still preserves the semantics of is_shorthand_path(). zfs_append_partition() appends a partition suffix to a device path. This should be used to generate the name of a whole disk as it is stored in the vdev label. The user-visible names of whole disks do not contain the partition information, while the name in the vdev label does. The code was lifted from the function make_disks(), which now just calls the helper function. Again, having a helper function to do this supports general handling of shorthand names in the user interface. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-10-13 23:16:25 +00:00
extern int zfs_resolve_shortname(const char *name, char *path, size_t pathlen);
2012-10-17 23:58:54 +00:00
extern int zfs_strcmp_pathname(char *name, char *cmp_name, int wholedisk);
Fix 'zpool import' detection issues This patch addresses multiple 'zpool import' block device indentification problems which are most likely to occur on a system configured to use blkid, by_vdev paths, multipath and failover. The symptom most commonly observed is the import uses different path names to import the pool than would normally be expected. * When using blkid to identify vdevs the listed devices may be added to the cache in any order. In order to apply the preferred search order heuristic a zfs_path_order() function was added to calculate the order given full path names. * Since it's possible to have multiple block devices with different vdev guids which refer to the same ZPOOL_CONFIG_PATH the slice cache must be indexed by guid and name. By avoiding collisions the preferred ordering can be maintaining even when multiple block devices claim the same ZPOOL_CONFIG_PATH. The preferred sorting by partition was never benefitial for a Linux system and was removed as part of this change. * When adding entries to the blkid cache avl_find/avl_insert are used instead of avl_add because collisions are possible and must be handled gracefully. * For pools using multipath devices there are, at a minimum, three devices where a vdev label may be read. They are the dm-* device and each underlying /dev/sd* device. Due to the way the block cache is implemented each of these devices may have a different cached copy of the vdev label. This can result in "ghost pools" which appear to persist even after a 'zpool labelclear' has been done to the dm-* device. In order to prevent this the vdev label is read with O_DIRECT in order to bypass any caching to get the on-disk version. * When opening a block device verify that vdev guid read from the disk matches the expected vdev guid. This allows for bad labels to be filtered out. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5359
2016-11-07 18:28:57 +00:00
extern int zfs_path_order(char *path, int *order);
2008-11-20 20:01:55 +00:00
/*
* Mount support functions.
*/
extern boolean_t is_mounted(libzfs_handle_t *, const char *special, char **);
extern boolean_t zfs_is_mounted(zfs_handle_t *, char **);
extern int zfs_mount(zfs_handle_t *, const char *, int);
extern int zfs_unmount(zfs_handle_t *, const char *, int);
extern int zfs_unmountall(zfs_handle_t *, int);
/*
* Share support functions.
*/
extern boolean_t zfs_is_shared(zfs_handle_t *);
extern int zfs_share(zfs_handle_t *);
extern int zfs_unshare(zfs_handle_t *);
/*
* Protocol-specific share support functions.
*/
extern boolean_t zfs_is_shared_nfs(zfs_handle_t *, char **);
extern boolean_t zfs_is_shared_smb(zfs_handle_t *, char **);
extern int zfs_share_nfs(zfs_handle_t *);
extern int zfs_share_smb(zfs_handle_t *);
extern int zfs_shareall(zfs_handle_t *);
extern int zfs_unshare_nfs(zfs_handle_t *, const char *);
extern int zfs_unshare_smb(zfs_handle_t *, const char *);
extern int zfs_unshareall_nfs(zfs_handle_t *);
extern int zfs_unshareall_smb(zfs_handle_t *);
extern int zfs_unshareall_bypath(zfs_handle_t *, const char *);
extern int zfs_unshareall_bytype(zfs_handle_t *, const char *, const char *);
2008-11-20 20:01:55 +00:00
extern int zfs_unshareall(zfs_handle_t *);
2009-07-02 22:44:48 +00:00
extern int zfs_deleg_share_nfs(libzfs_handle_t *, char *, char *, char *,
2008-11-20 20:01:55 +00:00
void *, void *, int, zfs_share_op_t);
/*
* Formats for iostat numbers. Examples: "12K", "30ms", "4B", "2321234", "-".
*
* ZFS_NICENUM_1024: Print kilo, mega, tera, peta, exa..
* ZFS_NICENUM_BYTES: Print single bytes ("13B"), kilo, mega, tera...
* ZFS_NICENUM_TIME: Print nanosecs, microsecs, millisecs, seconds...
* ZFS_NICENUM_RAW: Print the raw number without any formatting
* ZFS_NICENUM_RAWTIME: Same as RAW, but print dashes ('-') for zero.
*/
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <hutter2@llnl.gov Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4433
2016-02-29 18:05:23 +00:00
enum zfs_nicenum_format {
ZFS_NICENUM_1024 = 0,
ZFS_NICENUM_BYTES = 1,
ZFS_NICENUM_TIME = 2,
ZFS_NICENUM_RAW = 3,
ZFS_NICENUM_RAWTIME = 4
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <hutter2@llnl.gov Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4433
2016-02-29 18:05:23 +00:00
};
2008-11-20 20:01:55 +00:00
/*
* Utility function to convert a number to a human-readable form.
*/
extern void zfs_nicenum(uint64_t, char *, size_t);
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <hutter2@llnl.gov Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4433
2016-02-29 18:05:23 +00:00
extern void zfs_nicenum_format(uint64_t num, char *buf, size_t buflen,
enum zfs_nicenum_format type);
extern void zfs_nicetime(uint64_t, char *, size_t);
extern void zfs_nicebytes(uint64_t, char *, size_t);
2008-11-20 20:01:55 +00:00
extern int zfs_nicestrtonum(libzfs_handle_t *, const char *, uint64_t *);
/*
* Utility functions to run an external process.
*/
#define STDOUT_VERBOSE 0x01
#define STDERR_VERBOSE 0x02
2017-04-21 16:27:04 +00:00
#define NO_DEFAULT_PATH 0x04 /* Don't use $PATH to lookup the command */
int libzfs_run_process(const char *, char **, int flags);
2017-04-21 16:27:04 +00:00
int libzfs_run_process_get_stdout(const char *path, char *argv[], char *env[],
char **lines[], int *lines_cnt);
int libzfs_run_process_get_stdout_nopath(const char *path, char *argv[],
char *env[], char **lines[], int *lines_cnt);
void libzfs_free_str_array(char **strs, int count);
int libzfs_envvar_is_set(char *envvar);
2008-11-20 20:01:55 +00:00
/*
* Given a device or file, determine if it is part of a pool.
*/
extern int zpool_in_use(libzfs_handle_t *, int, pool_state_t *, char **,
boolean_t *);
/*
* Label manipulation.
2008-11-20 20:01:55 +00:00
*/
extern int zpool_read_label(int, nvlist_t **, int *);
extern int zpool_clear_label(int);
2008-11-20 20:01:55 +00:00
2009-07-02 22:44:48 +00:00
/*
* Management interfaces for SMB ACL files
*/
int zfs_smb_acl_add(libzfs_handle_t *, char *, char *, char *);
int zfs_smb_acl_remove(libzfs_handle_t *, char *, char *, char *);
int zfs_smb_acl_purge(libzfs_handle_t *, char *, char *);
int zfs_smb_acl_rename(libzfs_handle_t *, char *, char *, char *, char *);
2008-11-20 20:01:55 +00:00
/*
* Enable and disable datasets within a pool by mounting/unmounting and
* sharing/unsharing them.
*/
extern int zpool_enable_datasets(zpool_handle_t *, const char *, int);
extern int zpool_disable_datasets(zpool_handle_t *, boolean_t);
/*
* Support for Linux libudev derived persistent device strings
*/
extern boolean_t is_mpath_whole_disk(const char *);
extern void update_vdev_config_dev_strs(nvlist_t *);
extern char *zfs_strip_partition(char *);
extern char *zfs_strip_partition_path(char *);
#ifdef HAVE_LIBUDEV
struct udev_device;
extern boolean_t udev_is_mpath(struct udev_device *dev);
extern int zfs_device_get_devid(struct udev_device *, char *, size_t);
extern int zfs_device_get_physical(struct udev_device *, char *, size_t);
#endif
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
extern int zfs_remap_indirects(libzfs_handle_t *hdl, const char *);
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
}
#endif
#endif /* _LIBZFS_H */