d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f367e2f24c
freebsd-nq/sys/net/if_spppsubr.c

5375 lines
132 KiB
C
Raw Normal View History

Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
* Synchronous PPP/Cisco link level subroutines.
* Keepalive protocol implemented in both Cisco and PPP modes.
*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* Copyright (C) 1994-1996 Cronyx Engineering Ltd.
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Author: Serge Vakulenko, <vak@cronyx.ru>
*
* Heavily revamped to conform to RFC 1661.
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
* Copyright (C) 1997, 2001 Joerg Wunsch.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*
* This software is distributed with NO WARRANTIES, not even the implied
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* Authors grant any other persons or organisations permission to use
* or modify this software as long as this message is kept with the software,
* all derivative works or modified versions.
*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* From: Version 2.4, Thu Apr 30 17:17:21 MSD 1997
Add $Id$
1996-06-10 23:17:45 +00:00
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#include <sys/param.h>
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Make INET a proper option. This will not make any of object files that LINT create change; there might be differences with INET disabled, but hardly anything compiled before without INET anyway. Now the 'obvious' things will give a proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The only thing that _should_ work (but can't be made to compile reasonably easily) is sppp :-( This commit move struct arpcom from <netinet/if_ether.h> to <net/if_arp.h>.
1998-01-08 23:42:31 +00:00
#include "opt_inet.h"
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
#include "opt_inet6.h"
Throw options IPX, IPXIP and IPTUNNEL into opt_ipx.h. The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and ifconfig.c only). I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code inside, as it never could have compiled - doh.)
1997-12-15 20:31:25 +00:00
#include "opt_ipx.h"
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
#ifdef NetBSD1_3
# if NetBSD1_3 > 6
# include "opt_inet.h"
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
# include "opt_inet6.h"
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
# include "opt_iso.h"
# endif
#endif
Throw options IPX, IPXIP and IPTUNNEL into opt_ipx.h. The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and ifconfig.c only). I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code inside, as it never could have compiled - doh.)
1997-12-15 20:31:25 +00:00
Fix bogus include paths: <systm.h> is <sys/systm.h>. <kernel.h> is <sys/kernel.h>.
1994-12-04 08:52:51 +00:00
#include <sys/systm.h>
#include <sys/kernel.h>
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
#include <sys/module.h>
Don't include <sys/ioctl.h> in the kernel. Stage 2: include <sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
#include <sys/sockio.h>
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#include <sys/socket.h>
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
#include <sys/syslog.h>
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
* Use sys/sys/random.h rather than a i386 specific one. * There was nothing that should be machine dependant about i386/isa/random_machdep.c, so it is now sys/kern/kern_random.c.
2000-04-24 17:30:08 +00:00
#include <sys/random.h>
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#endif
Added used #include - don't depend on <sys/mbuf.h> including <sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
#include <sys/malloc.h>
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#include <sys/mbuf.h>
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#if defined (__OpenBSD__)
#include <sys/md5k.h>
#else
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
#include <sys/md5.h>
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#include <net/if.h>
#include <net/netisr.h>
#include <net/if_types.h>
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#include <net/route.h>
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <net/slcompress.h>
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#if defined (__NetBSD__) || defined (__OpenBSD__)
#include <machine/cpu.h> /* XXX for softnet */
#endif
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#include <machine/stdarg.h>
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
Fix compilation without INET (though not really tested yet without INET). Obtained from: NetBSD (rev 1.12) MFC after: 1 month
2001-12-30 17:00:32 +00:00
#ifdef INET
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#include <netinet/ip.h>
#include <netinet/tcp.h>
Fix compilation without INET (though not really tested yet without INET). Obtained from: NetBSD (rev 1.12) MFC after: 1 month
2001-12-30 17:00:32 +00:00
#endif
#if defined (__FreeBSD__) || defined (__OpenBSD__)
# include <netinet/if_ether.h>
#else
# include <net/ethertypes.h>
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#endif
Reviewed by: julian and jhay@mikom.csir.co.za Submitted by: Mike Mitchell, supervisor@alb.asctmd.com This is a bulk mport of Mike's IPX/SPX protocol stacks and all the related gunf that goes with it.. it is not guaranteed to work 100% correctly at this time but as we had several people trying to work on it I figured it would be better to get it checked in so they could all get teh same thing to work on.. Mikes been using it for a year or so but on 2.0 more changes and stuff will be merged in from other developers now that this is in. Mike Mitchell, Network Engineer AMTECH Systems Corporation, Technology and Manufacturing 8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000 supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
#ifdef IPX
#include <netipx/ipx.h>
#include <netipx/ipx_if.h>
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#include <net/if_sppp.h>
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
# define UNTIMEOUT(fun, arg, handle) untimeout(fun, arg, handle)
# define TIMEOUT(fun, arg1, arg2, handle) handle = timeout(fun, arg1, arg2)
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
# define IOCTL_CMD_T u_long
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
# define UNTIMEOUT(fun, arg, handle) untimeout(fun, arg)
# define TIMEOUT(fun, arg1, arg2, handle) timeout(fun, arg1, arg2)
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
# define IOCTL_CMD_T int
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#define MAXALIVECNT 3 /* max. alive packets */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* Interface flags that can be set in an ifconfig command.
*
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
* Setting link0 will make the link passive, i.e. it will be marked
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* as being administrative openable, but won't be opened to begin
* with. Incoming calls will be answered, or subsequent calls with
* -link1 will cause the administrative open of the LCP layer.
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
*
* Setting link1 will cause the link to auto-dial only as packets
* arrive to be sent.
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
*
* Setting IFF_DEBUG will syslog the option negotiation and state
* transitions at level kern.debug. Note: all logs consistently look
* like
*
* <if-name><unit>: <proto-name> <additional info...>
*
* with <if-name><unit> being something like "bppp0", and <proto-name>
* being one of "lcp", "ipcp", "cisco", "chap", "pap", etc.
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
#define IFF_PASSIVE IFF_LINK0 /* wait passively for connection */
#define IFF_AUTO IFF_LINK1 /* auto-dial on output */
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
#define IFF_CISCO IFF_LINK2 /* auto-dial on output */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */
#define PPP_UI 0x03 /* Unnumbered Information */
#define PPP_IP 0x0021 /* Internet Protocol */
#define PPP_ISO 0x0023 /* ISO OSI Protocol */
#define PPP_XNS 0x0025 /* Xerox NS Protocol */
#define PPP_IPX 0x002b /* Novell IPX Protocol */
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
#define PPP_VJ_COMP 0x002d /* VJ compressed TCP/IP */
#define PPP_VJ_UCOMP 0x002f /* VJ uncompressed TCP/IP */
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#define PPP_IPV6 0x0057 /* Internet Protocol Version 6 */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
#define PPP_LCP 0xc021 /* Link Control Protocol */
#define PPP_PAP 0xc023 /* Password Authentication Protocol */
#define PPP_CHAP 0xc223 /* Challenge-Handshake Auth Protocol */
#define PPP_IPCP 0x8021 /* Internet Protocol Control Protocol */
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
#define CONF_REQ 1 /* PPP configure request */
#define CONF_ACK 2 /* PPP configure acknowledge */
#define CONF_NAK 3 /* PPP configure negative ack */
#define CONF_REJ 4 /* PPP configure reject */
#define TERM_REQ 5 /* PPP terminate request */
#define TERM_ACK 6 /* PPP terminate acknowledge */
#define CODE_REJ 7 /* PPP code reject */
#define PROTO_REJ 8 /* PPP protocol reject */
#define ECHO_REQ 9 /* PPP echo request */
#define ECHO_REPLY 10 /* PPP echo reply */
#define DISC_REQ 11 /* PPP discard request */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
#define LCP_OPT_MRU 1 /* maximum receive unit */
#define LCP_OPT_ASYNC_MAP 2 /* async control character map */
#define LCP_OPT_AUTH_PROTO 3 /* authentication protocol */
#define LCP_OPT_QUAL_PROTO 4 /* quality protocol */
#define LCP_OPT_MAGIC 5 /* magic number */
#define LCP_OPT_RESERVED 6 /* reserved */
#define LCP_OPT_PROTO_COMP 7 /* protocol field compression */
#define LCP_OPT_ADDR_COMP 8 /* address/control field compression */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
#define IPCP_OPT_ADDRESSES 1 /* both IP addresses; deprecated */
#define IPCP_OPT_COMPRESSION 2 /* IP compression protocol (VJ) */
#define IPCP_OPT_ADDRESS 3 /* local IP address */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#define IPV6CP_OPT_IFID 1 /* interface identifier */
#define IPV6CP_OPT_COMPRESSION 2 /* IPv6 compression protocol */
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
#define IPCP_COMP_VJ 0x2d /* Code for VJ compression */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
#define PAP_REQ 1 /* PAP name/password request */
#define PAP_ACK 2 /* PAP acknowledge */
#define PAP_NAK 3 /* PAP fail */
#define CHAP_CHALLENGE 1 /* CHAP challenge request */
#define CHAP_RESPONSE 2 /* CHAP challenge response */
#define CHAP_SUCCESS 3 /* CHAP response ok */
#define CHAP_FAILURE 4 /* CHAP response failed */
#define CHAP_MD5 5 /* hash algorithm - MD5 */
#define CISCO_MULTICAST 0x8f /* Cisco multicast address */
#define CISCO_UNICAST 0x0f /* Cisco unicast address */
#define CISCO_KEEPALIVE 0x8035 /* Cisco keepalive protocol */
#define CISCO_ADDR_REQ 0 /* Cisco address request */
#define CISCO_ADDR_REPLY 1 /* Cisco address reply */
#define CISCO_KEEPALIVE_REQ 2 /* Cisco keepalive request */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* states are named and numbered according to RFC 1661 */
#define STATE_INITIAL 0
#define STATE_STARTING 1
#define STATE_CLOSED 2
#define STATE_STOPPED 3
#define STATE_CLOSING 4
#define STATE_STOPPING 5
#define STATE_REQ_SENT 6
#define STATE_ACK_RCVD 7
#define STATE_ACK_SENT 8
#define STATE_OPENED 9
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
struct ppp_header {
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
u_char address;
u_char control;
u_short protocol;
Add the `packed' attribute to structures which describe wire protocol data formats. Obtained from: NetBSD (rev 1.6) MFC after: 1 month
2001-12-30 16:52:40 +00:00
} __attribute__((__packed__));
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#define PPP_HEADER_LEN sizeof (struct ppp_header)
struct lcp_header {
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
u_char type;
u_char ident;
u_short len;
Add the `packed' attribute to structures which describe wire protocol data formats. Obtained from: NetBSD (rev 1.6) MFC after: 1 month
2001-12-30 16:52:40 +00:00
} __attribute__((__packed__));
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#define LCP_HEADER_LEN sizeof (struct lcp_header)
struct cisco_packet {
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
u_long type;
u_long par1;
u_long par2;
u_short rel;
u_short time0;
u_short time1;
Add the `packed' attribute to structures which describe wire protocol data formats. Obtained from: NetBSD (rev 1.6) MFC after: 1 month
2001-12-30 16:52:40 +00:00
} __attribute__((__packed__));
#define CISCO_PACKET_LEN sizeof (struct cisco_packet)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* We follow the spelling and capitalization of RFC 1661 here, to make
* it easier comparing with the standard. Please refer to this RFC in
* case you can't make sense out of these abbreviation; it will also
* explain the semantics related to the various events and actions.
*/
struct cp {
u_short proto; /* PPP control protocol number */
u_char protoidx; /* index into state table in struct sppp */
u_char flags;
#define CP_LCP 0x01 /* this is the LCP */
#define CP_AUTH 0x02 /* this is an authentication protocol */
#define CP_NCP 0x04 /* this is a NCP */
#define CP_QUAL 0x08 /* this is a quality reporting protocol */
const char *name; /* name of this control protocol */
/* event handlers */
void (*Up)(struct sppp *sp);
void (*Down)(struct sppp *sp);
void (*Open)(struct sppp *sp);
void (*Close)(struct sppp *sp);
void (*TO)(void *sp);
int (*RCR)(struct sppp *sp, struct lcp_header *h, int len);
void (*RCN_rej)(struct sppp *sp, struct lcp_header *h, int len);
void (*RCN_nak)(struct sppp *sp, struct lcp_header *h, int len);
/* actions */
void (*tlu)(struct sppp *sp);
void (*tld)(struct sppp *sp);
void (*tls)(struct sppp *sp);
void (*tlf)(struct sppp *sp);
void (*scr)(struct sppp *sp);
};
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static struct sppp *spppq;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static struct callout_handle keepalive_ch;
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#define SPP_FMT "%s%d: "
#define SPP_ARGS(ifp) (ifp)->if_name, (ifp)->if_unit
#else
#define SPP_FMT "%s: "
#define SPP_ARGS(ifp) (ifp)->if_xname
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Fix compilation without INET (though not really tested yet without INET). Obtained from: NetBSD (rev 1.12) MFC after: 1 month
2001-12-30 17:00:32 +00:00
#ifdef INET
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
* The following disgusting hack gets around the problem that IP TOS
* can't be set yet. We want to put "interactive" traffic on a high
* priority queue. To decide if traffic is interactive, we check that
* a) it is TCP and b) one of its ports is telnet, rlogin or ftp control.
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
*
* XXX is this really still necessary? - joerg -
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
static u_short interactive_ports[8] = {
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
0, 513, 0, 0,
0, 21, 0, 23,
};
#define INTERACTIVE(p) (interactive_ports[(p) & 7] == (p))
Fix compilation without INET (though not really tested yet without INET). Obtained from: NetBSD (rev 1.12) MFC after: 1 month
2001-12-30 17:00:32 +00:00
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* almost every function needs these */
#define STDDCL \
struct ifnet *ifp = &sp->pp_if; \
int debug = ifp->if_flags & IFF_DEBUG
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static int sppp_output(struct ifnet *ifp, struct mbuf *m,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
struct sockaddr *dst, struct rtentry *rt);
static void sppp_cisco_send(struct sppp *sp, int type, long par1, long par2);
static void sppp_cisco_input(struct sppp *sp, struct mbuf *m);
static void sppp_cp_input(const struct cp *cp, struct sppp *sp,
struct mbuf *m);
static void sppp_cp_send(struct sppp *sp, u_short proto, u_char type,
u_char ident, u_short len, void *data);
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/* static void sppp_cp_timeout(void *arg); */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void sppp_cp_change_state(const struct cp *cp, struct sppp *sp,
int newstate);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void sppp_auth_send(const struct cp *cp,
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
struct sppp *sp, unsigned int type, unsigned int id,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
...);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void sppp_up_event(const struct cp *cp, struct sppp *sp);
static void sppp_down_event(const struct cp *cp, struct sppp *sp);
static void sppp_open_event(const struct cp *cp, struct sppp *sp);
static void sppp_close_event(const struct cp *cp, struct sppp *sp);
static void sppp_to_event(const struct cp *cp, struct sppp *sp);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void sppp_null(struct sppp *sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void sppp_lcp_init(struct sppp *sp);
static void sppp_lcp_up(struct sppp *sp);
static void sppp_lcp_down(struct sppp *sp);
static void sppp_lcp_open(struct sppp *sp);
static void sppp_lcp_close(struct sppp *sp);
static void sppp_lcp_TO(void *sp);
static int sppp_lcp_RCR(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_lcp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_lcp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_lcp_tlu(struct sppp *sp);
static void sppp_lcp_tld(struct sppp *sp);
static void sppp_lcp_tls(struct sppp *sp);
static void sppp_lcp_tlf(struct sppp *sp);
static void sppp_lcp_scr(struct sppp *sp);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void sppp_lcp_check_and_close(struct sppp *sp);
static int sppp_ncp_check(struct sppp *sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void sppp_ipcp_init(struct sppp *sp);
static void sppp_ipcp_up(struct sppp *sp);
static void sppp_ipcp_down(struct sppp *sp);
static void sppp_ipcp_open(struct sppp *sp);
static void sppp_ipcp_close(struct sppp *sp);
static void sppp_ipcp_TO(void *sp);
static int sppp_ipcp_RCR(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_ipcp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_ipcp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_ipcp_tlu(struct sppp *sp);
static void sppp_ipcp_tld(struct sppp *sp);
static void sppp_ipcp_tls(struct sppp *sp);
static void sppp_ipcp_tlf(struct sppp *sp);
static void sppp_ipcp_scr(struct sppp *sp);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
static void sppp_ipv6cp_init(struct sppp *sp);
static void sppp_ipv6cp_up(struct sppp *sp);
static void sppp_ipv6cp_down(struct sppp *sp);
static void sppp_ipv6cp_open(struct sppp *sp);
static void sppp_ipv6cp_close(struct sppp *sp);
static void sppp_ipv6cp_TO(void *sp);
static int sppp_ipv6cp_RCR(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_ipv6cp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_ipv6cp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len);
static void sppp_ipv6cp_tlu(struct sppp *sp);
static void sppp_ipv6cp_tld(struct sppp *sp);
static void sppp_ipv6cp_tls(struct sppp *sp);
static void sppp_ipv6cp_tlf(struct sppp *sp);
static void sppp_ipv6cp_scr(struct sppp *sp);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void sppp_pap_input(struct sppp *sp, struct mbuf *m);
static void sppp_pap_init(struct sppp *sp);
static void sppp_pap_open(struct sppp *sp);
static void sppp_pap_close(struct sppp *sp);
static void sppp_pap_TO(void *sp);
static void sppp_pap_my_TO(void *sp);
static void sppp_pap_tlu(struct sppp *sp);
static void sppp_pap_tld(struct sppp *sp);
static void sppp_pap_scr(struct sppp *sp);
static void sppp_chap_input(struct sppp *sp, struct mbuf *m);
static void sppp_chap_init(struct sppp *sp);
static void sppp_chap_open(struct sppp *sp);
static void sppp_chap_close(struct sppp *sp);
static void sppp_chap_TO(void *sp);
static void sppp_chap_tlu(struct sppp *sp);
static void sppp_chap_tld(struct sppp *sp);
static void sppp_chap_scr(struct sppp *sp);
static const char *sppp_auth_type_name(u_short proto, u_char type);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static const char *sppp_cp_type_name(u_char type);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static const char *sppp_dotted_quad(u_long addr);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static const char *sppp_ipcp_opt_name(u_char opt);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef INET6
static const char *sppp_ipv6cp_opt_name(u_char opt);
#endif
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static const char *sppp_lcp_opt_name(u_char opt);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static const char *sppp_phase_name(enum ppp_phase phase);
static const char *sppp_proto_name(u_short proto);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static const char *sppp_state_name(int state);
Fixed yet more ioctl breakage due to the type of the `cmd' arg changing from int to u_long but not changing here.
1998-08-15 21:58:09 +00:00
static int sppp_params(struct sppp *sp, u_long cmd, void *data);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static int sppp_strnlen(u_char *p, int max);
static void sppp_get_ip_addrs(struct sppp *sp, u_long *src, u_long *dst,
u_long *srcmask);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void sppp_keepalive(void *dummy);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void sppp_phase_network(struct sppp *sp);
static void sppp_print_bytes(const u_char *p, u_short len);
static void sppp_print_string(const char *p, u_short len);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void sppp_qflush(struct ifqueue *ifq);
static void sppp_set_ip_addr(struct sppp *sp, u_long src);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef INET6
static void sppp_get_ip6_addrs(struct sppp *sp, struct in6_addr *src,
struct in6_addr *dst, struct in6_addr *srcmask);
#ifdef IPV6CP_MYIFID_DYN
static void sppp_set_ip6_addr(struct sppp *sp, const struct in6_addr *src);
static void sppp_gen_ip6_addr(struct sppp *sp, const struct in6_addr *src);
#endif
static void sppp_suggest_ip6_addr(struct sppp *sp, struct in6_addr *src);
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* our control protocol descriptors */
Staticize.
1998-02-09 06:11:36 +00:00
static const struct cp lcp = {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
PPP_LCP, IDX_LCP, CP_LCP, "lcp",
sppp_lcp_up, sppp_lcp_down, sppp_lcp_open, sppp_lcp_close,
sppp_lcp_TO, sppp_lcp_RCR, sppp_lcp_RCN_rej, sppp_lcp_RCN_nak,
sppp_lcp_tlu, sppp_lcp_tld, sppp_lcp_tls, sppp_lcp_tlf,
sppp_lcp_scr
};
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Staticize.
1998-02-09 06:11:36 +00:00
static const struct cp ipcp = {
run IPCP only if we have IPv4 in kernel Obtained from: NetBSD (rev 1.19) MFC after: 1 month
2001-12-30 18:07:26 +00:00
PPP_IPCP, IDX_IPCP,
#ifdef INET /* don't run IPCP if there's no IPv4 support */
CP_NCP,
#else
0,
#endif
"ipcp",
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_ipcp_up, sppp_ipcp_down, sppp_ipcp_open, sppp_ipcp_close,
sppp_ipcp_TO, sppp_ipcp_RCR, sppp_ipcp_RCN_rej, sppp_ipcp_RCN_nak,
sppp_ipcp_tlu, sppp_ipcp_tld, sppp_ipcp_tls, sppp_ipcp_tlf,
sppp_ipcp_scr
};
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
static const struct cp ipv6cp = {
PPP_IPV6CP, IDX_IPV6CP,
#ifdef INET6 /*don't run IPv6CP if there's no IPv6 support*/
CP_NCP,
#else
0,
#endif
"ipv6cp",
sppp_ipv6cp_up, sppp_ipv6cp_down, sppp_ipv6cp_open, sppp_ipv6cp_close,
sppp_ipv6cp_TO, sppp_ipv6cp_RCR, sppp_ipv6cp_RCN_rej, sppp_ipv6cp_RCN_nak,
sppp_ipv6cp_tlu, sppp_ipv6cp_tld, sppp_ipv6cp_tls, sppp_ipv6cp_tlf,
sppp_ipv6cp_scr
};
Staticize.
1998-02-09 06:11:36 +00:00
static const struct cp pap = {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
PPP_PAP, IDX_PAP, CP_AUTH, "pap",
sppp_null, sppp_null, sppp_pap_open, sppp_pap_close,
sppp_pap_TO, 0, 0, 0,
sppp_pap_tlu, sppp_pap_tld, sppp_null, sppp_null,
sppp_pap_scr
};
Staticize.
1998-02-09 06:11:36 +00:00
static const struct cp chap = {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
PPP_CHAP, IDX_CHAP, CP_AUTH, "chap",
sppp_null, sppp_null, sppp_chap_open, sppp_chap_close,
sppp_chap_TO, 0, 0, 0,
sppp_chap_tlu, sppp_chap_tld, sppp_null, sppp_null,
sppp_chap_scr
};
Staticize.
1998-02-09 06:11:36 +00:00
static const struct cp *cps[IDX_COUNT] = {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
&lcp, /* IDX_LCP */
&ipcp, /* IDX_IPCP */
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
&ipv6cp, /* IDX_IPV6CP */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
&pap, /* IDX_PAP */
&chap, /* IDX_CHAP */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
};
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
static int
sppp_modevent(module_t mod, int type, void *unused)
{
switch (type) {
case MOD_LOAD:
break;
case MOD_UNLOAD:
return EACCES;
break;
default:
break;
}
return 0;
}
static moduledata_t spppmod = {
"sppp",
sppp_modevent,
0
};
MODULE_VERSION(sppp, 1);
DECLARE_MODULE(sppp, spppmod, SI_SUB_DRIVERS, SI_ORDER_ANY);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Exported functions, comprising our interface to the lower layer.
*/
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
* Process the received packet.
*/
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
void
sppp_input(struct ifnet *ifp, struct mbuf *m)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
struct ppp_header *h;
struct ifqueue *inq = 0;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
struct sppp *sp = (struct sppp *)ifp;
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
u_char *iphdr;
int hlen, vjlen, do_account = 0;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int debug = ifp->if_flags & IFF_DEBUG;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
if (ifp->if_flags & IFF_UP)
/* Count received bytes, add FCS and one flag */
ifp->if_ibytes += m->m_pkthdr.len + 3;
if (m->m_pkthdr.len <= PPP_HEADER_LEN) {
/* Too small packet, drop it. */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "input packet is too small, %d bytes\n",
SPP_ARGS(ifp), m->m_pkthdr.len);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
drop:
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
m_freem (m);
drop2:
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++ifp->if_ierrors;
++ifp->if_iqdrops;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
return;
}
/* Get PPP header. */
h = mtod (m, struct ppp_header*);
m_adj (m, PPP_HEADER_LEN);
switch (h->address) {
case PPP_ALLSTATIONS:
if (h->control != PPP_UI)
goto invalid;
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode == IFF_CISCO) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "PPP packet in Cisco mode "
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
"<addr=0x%x ctrl=0x%x proto=0x%x>\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
h->address, h->control, ntohs(h->protocol));
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
goto drop;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
switch (ntohs (h->protocol)) {
default:
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
log(LOG_DEBUG,
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
SPP_FMT "rejecting protocol "
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
"<addr=0x%x ctrl=0x%x proto=0x%x>\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
h->address, h->control, ntohs(h->protocol));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
if (sp->state[IDX_LCP] == STATE_OPENED)
sppp_cp_send (sp, PPP_LCP, PROTO_REJ,
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
++sp->pp_seq[IDX_LCP], m->m_pkthdr.len + 2,
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
&h->protocol);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
++ifp->if_noproto;
goto drop;
case PPP_LCP:
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_cp_input(&lcp, sp, m);
m_freem (m);
return;
case PPP_PAP:
if (sp->pp_phase >= PHASE_AUTHENTICATE)
sppp_pap_input(sp, m);
m_freem (m);
return;
case PPP_CHAP:
if (sp->pp_phase >= PHASE_AUTHENTICATE)
sppp_chap_input(sp, m);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
m_freem (m);
return;
#ifdef INET
case PPP_IPCP:
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->pp_phase == PHASE_NETWORK)
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_cp_input(&ipcp, sp, m);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
m_freem (m);
return;
case PPP_IP:
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->state[IDX_IPCP] == STATE_OPENED) {
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
schednetisr (NETISR_IP);
inq = &ipintrq;
}
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
case PPP_VJ_COMP:
if (sp->state[IDX_IPCP] == STATE_OPENED) {
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
if ((vjlen =
sl_uncompress_tcp_core(mtod(m, u_char *),
m->m_len, m->m_len,
TYPE_COMPRESSED_TCP,
sp->pp_comp,
&iphdr, &hlen)) <= 0) {
if (debug)
log(LOG_INFO,
SPP_FMT "VJ uncompress failed on compressed packet\n",
SPP_ARGS(ifp));
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
goto drop;
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
}
/*
* Trim the VJ header off the packet, and prepend
* the uncompressed IP header (which will usually
* end up in two chained mbufs since there's not
* enough leading space in the existing mbuf).
*/
m_adj(m, vjlen);
M_PREPEND(m, hlen, M_DONTWAIT);
if (m == NULL)
goto drop2;
bcopy(iphdr, mtod(m, u_char *), hlen);
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
schednetisr (NETISR_IP);
inq = &ipintrq;
}
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
do_account++;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
break;
case PPP_VJ_UCOMP:
if (sp->state[IDX_IPCP] == STATE_OPENED) {
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
if (sl_uncompress_tcp_core(mtod(m, u_char *),
m->m_len, m->m_len,
TYPE_UNCOMPRESSED_TCP,
sp->pp_comp,
&iphdr, &hlen) != 0) {
if (debug)
log(LOG_INFO,
SPP_FMT "VJ uncompress failed on uncompressed packet\n",
SPP_ARGS(ifp));
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
goto drop;
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
}
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
schednetisr (NETISR_IP);
inq = &ipintrq;
}
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
do_account++;
break;
#endif
#ifdef INET6
case PPP_IPV6CP:
if (sp->pp_phase == PHASE_NETWORK)
sppp_cp_input(&ipv6cp, sp, m);
m_freem (m);
return;
case PPP_IPV6:
if (sp->state[IDX_IPV6CP] == STATE_OPENED) {
schednetisr (NETISR_IPV6);
inq = &ip6intrq;
}
do_account++;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
break;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#endif
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
#ifdef IPX
case PPP_IPX:
/* IPX IPXCP not implemented yet */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->pp_phase == PHASE_NETWORK) {
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
schednetisr (NETISR_IPX);
inq = &ipxintrq;
}
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
break;
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#ifdef NS
case PPP_XNS:
/* XNS IDPCP not implemented yet */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->pp_phase == PHASE_NETWORK) {
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
schednetisr (NETISR_NS);
inq = &nsintrq;
}
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
#endif
}
break;
case CISCO_MULTICAST:
case CISCO_UNICAST:
/* Don't check the control field here (RFC 1547). */
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode != IFF_CISCO) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "Cisco packet in PPP mode "
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
"<addr=0x%x ctrl=0x%x proto=0x%x>\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
h->address, h->control, ntohs(h->protocol));
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
goto drop;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
switch (ntohs (h->protocol)) {
default:
++ifp->if_noproto;
goto invalid;
case CISCO_KEEPALIVE:
sppp_cisco_input ((struct sppp*) ifp, m);
m_freem (m);
return;
#ifdef INET
case ETHERTYPE_IP:
schednetisr (NETISR_IP);
inq = &ipintrq;
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
#endif
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
#ifdef INET6
case ETHERTYPE_IPV6:
schednetisr (NETISR_IPV6);
inq = &ip6intrq;
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
break;
#endif
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
#ifdef IPX
case ETHERTYPE_IPX:
schednetisr (NETISR_IPX);
inq = &ipxintrq;
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
break;
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#ifdef NS
case ETHERTYPE_NS:
schednetisr (NETISR_NS);
inq = &nsintrq;
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
do_account++;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
#endif
}
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
default: /* Invalid PPP packet. */
invalid:
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "invalid input packet "
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
"<addr=0x%x ctrl=0x%x proto=0x%x>\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
h->address, h->control, ntohs(h->protocol));
goto drop;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
if (! (ifp->if_flags & IFF_UP) || ! inq)
goto drop;
/* Check queue. */
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
if (! IF_HANDOFF(inq, m, NULL)) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "protocol queue overflow\n",
SPP_ARGS(ifp));
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
goto drop;
}
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
if (do_account)
/*
* Do only account for network packets, not for control
* packets. This is used by some subsystems to detect
* idle lines.
*/
sp->pp_last_recv = time_second;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
/*
* Enqueue transmit packet.
*/
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static int
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
sppp_output(struct ifnet *ifp, struct mbuf *m,
struct sockaddr *dst, struct rtentry *rt)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
struct sppp *sp = (struct sppp*) ifp;
struct ppp_header *h;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
struct ifqueue *ifq = NULL;
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
int s, rv = 0;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
int ipproto = PPP_IP;
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
int debug = ifp->if_flags & IFF_DEBUG;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
s = splimp();
if ((ifp->if_flags & IFF_UP) == 0 ||
(ifp->if_flags & (IFF_RUNNING | IFF_AUTO)) == 0) {
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
#ifdef INET6
drop:
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
m_freem (m);
splx (s);
return (ENETDOWN);
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if ((ifp->if_flags & (IFF_RUNNING | IFF_AUTO)) == IFF_AUTO) {
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
#ifdef INET6
/*
* XXX
*
* Hack to prevent the initialization-time generated
* IPv6 multicast packet to erroneously cause a
* dialout event in case IPv6 has been
* administratively disabled on that interface.
*/
if (dst->sa_family == AF_INET6 &&
!(sp->confflags & CONF_ENABLE_IPV6))
goto drop;
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* Interface is not yet running, but auto-dial. Need
* to start LCP for it.
*/
ifp->if_flags |= IFF_RUNNING;
splx(s);
lcp.Open(sp);
s = splimp();
}
Restore the code wrongly nuked by previous commit. Following changed was made by previous commit: - IPV6CP supporting in kernel level ppp from NetBSD. Submitted by: y.shirasaki@ntt.com
2001-06-12 08:52:54 +00:00
ifq = &ifp->if_snd;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#ifdef INET
If a lcp configure request is received in the lcp opened state and it is acknowledged, it should go to the lcp ack sent state. Don't reply on lcp echo requests when not in the lcp opened state. If the interface is set to CISCO mode, it should still be marked running when ifconfiged. Fixed a few indentations that had gone wrong somewhere. Submitted-by: John.Hay@csir.co.za
1995-11-21 01:23:13 +00:00
if (dst->sa_family == AF_INET) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
/* XXX Check mbuf length here? */
If a lcp configure request is received in the lcp opened state and it is acknowledged, it should go to the lcp ack sent state. Don't reply on lcp echo requests when not in the lcp opened state. If the interface is set to CISCO mode, it should still be marked running when ifconfiged. Fixed a few indentations that had gone wrong somewhere. Submitted-by: John.Hay@csir.co.za
1995-11-21 01:23:13 +00:00
struct ip *ip = mtod (m, struct ip*);
struct tcphdr *tcp = (struct tcphdr*) ((long*)ip + ip->ip_hl);
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/*
* When using dynamic local IP address assignment by using
* 0.0.0.0 as a local address, the first TCP session will
* not connect because the local TCP checksum is computed
* using 0.0.0.0 which will later become our real IP address
* so the TCP checksum computed at the remote end will
* become invalid. So we
* - don't let packets with src ip addr 0 thru
* - we flag TCP packets with src ip 0 as an error
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
*/
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
if(ip->ip_src.s_addr == INADDR_ANY) /* -hm */
{
m_freem(m);
splx(s);
if(ip->ip_p == IPPROTO_TCP)
return(EADDRNOTAVAIL);
else
return(0);
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/*
* Put low delay, telnet, rlogin and ftp control packets
* in front of the queue.
*/
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
if (_IF_QFULL(&sp->pp_fastq))
*** empty log message ***
1998-12-11 21:40:13 +00:00
;
else if (ip->ip_tos & IPTOS_LOWDELAY)
ifq = &sp->pp_fastq;
else if (m->m_len < sizeof *ip + sizeof *tcp)
;
else if (ip->ip_p != IPPROTO_TCP)
;
else if (INTERACTIVE (ntohs (tcp->th_sport)))
ifq = &sp->pp_fastq;
else if (INTERACTIVE (ntohs (tcp->th_dport)))
If a lcp configure request is received in the lcp opened state and it is acknowledged, it should go to the lcp ack sent state. Don't reply on lcp echo requests when not in the lcp opened state. If the interface is set to CISCO mode, it should still be marked running when ifconfiged. Fixed a few indentations that had gone wrong somewhere. Submitted-by: John.Hay@csir.co.za
1995-11-21 01:23:13 +00:00
ifq = &sp->pp_fastq;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
/*
* Do IP Header compression
*/
if (sp->pp_mode != IFF_CISCO && (sp->ipcp.flags & IPCP_VJ) &&
ip->ip_p == IPPROTO_TCP)
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
switch (sl_compress_tcp(m, ip, sp->pp_comp,
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
sp->ipcp.compress_cid)) {
case TYPE_COMPRESSED_TCP:
ipproto = PPP_VJ_COMP;
break;
case TYPE_UNCOMPRESSED_TCP:
ipproto = PPP_VJ_UCOMP;
break;
case TYPE_IP:
ipproto = PPP_IP;
break;
default:
m_freem(m);
splx(s);
return (EINVAL);
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
#endif
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef INET6
if (dst->sa_family == AF_INET6) {
/* XXX do something tricky here? */
}
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
* Prepend general data packet PPP header. For now, IP only.
*/
M_PREPEND (m, PPP_HEADER_LEN, M_DONTWAIT);
if (! m) {
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "no memory for transmit header\n",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++ifp->if_oerrors;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
splx (s);
return (ENOBUFS);
}
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
/*
* May want to check size of packet
* (albeit due to the implementation it's always enough)
*/
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
h = mtod (m, struct ppp_header*);
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode == IFF_CISCO) {
Fix a traceroute problem in the CISCO HDLC mode. (cisco routers not returning ICMP_TIMXCEED) use CISCO_UNICAST instead of CISCO_MULTICAST to send normal packets. this is needed for packets to get processed by a cisco router, but doesn't matter if a packet is just forwarded. Reviewed by:itojun@itojun.org
1997-08-12 05:22:54 +00:00
h->address = CISCO_UNICAST; /* unicast address */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
h->control = 0;
} else {
h->address = PPP_ALLSTATIONS; /* broadcast address */
h->control = PPP_UI; /* Unnumbered Info */
}
switch (dst->sa_family) {
#ifdef INET
case AF_INET: /* Internet Protocol */
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode == IFF_CISCO)
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
h->protocol = htons (ETHERTYPE_IP);
else {
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
/*
* Don't choke with an ENETDOWN early. It's
* possible that we just started dialing out,
* so don't drop the packet immediately. If
* we notice that we run out of buffer space
* below, we will however remember that we are
* not ready to carry IP packets, and return
* ENETDOWN, as opposed to ENOBUFS.
*/
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
h->protocol = htons(ipproto);
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
if (sp->state[IDX_IPCP] != STATE_OPENED)
rv = ENETDOWN;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
#endif
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
#ifdef INET6
case AF_INET6: /* Internet Protocol */
if (sp->pp_mode == IFF_CISCO)
h->protocol = htons (ETHERTYPE_IPV6);
else {
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/*
* Don't choke with an ENETDOWN early. It's
* possible that we just started dialing out,
* so don't drop the packet immediately. If
* we notice that we run out of buffer space
* below, we will however remember that we are
* not ready to carry IP packets, and return
* ENETDOWN, as opposed to ENOBUFS.
*/
h->protocol = htons(PPP_IPV6);
if (sp->state[IDX_IPV6CP] != STATE_OPENED)
rv = ENETDOWN;
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
}
break;
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
#ifdef NS
case AF_NS: /* Xerox NS Protocol */
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
h->protocol = htons (sp->pp_mode == IFF_CISCO ?
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
ETHERTYPE_NS : PPP_XNS);
break;
#endif
Reviewed by: julian and jhay@mikom.csir.co.za Submitted by: Mike Mitchell, supervisor@alb.asctmd.com This is a bulk mport of Mike's IPX/SPX protocol stacks and all the related gunf that goes with it.. it is not guaranteed to work 100% correctly at this time but as we had several people trying to work on it I figured it would be better to get it checked in so they could all get teh same thing to work on.. Mikes been using it for a year or so but on 2.0 more changes and stuff will be merged in from other developers now that this is in. Mike Mitchell, Network Engineer AMTECH Systems Corporation, Technology and Manufacturing 8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000 supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
#ifdef IPX
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
case AF_IPX: /* Novell IPX Protocol */
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
h->protocol = htons (sp->pp_mode == IFF_CISCO ?
Implement some rudimentry IPX support...
1995-11-28 01:59:19 +00:00
ETHERTYPE_IPX : PPP_IPX);
Reviewed by: julian and jhay@mikom.csir.co.za Submitted by: Mike Mitchell, supervisor@alb.asctmd.com This is a bulk mport of Mike's IPX/SPX protocol stacks and all the related gunf that goes with it.. it is not guaranteed to work 100% correctly at this time but as we had several people trying to work on it I figured it would be better to get it checked in so they could all get teh same thing to work on.. Mikes been using it for a year or so but on 2.0 more changes and stuff will be merged in from other developers now that this is in. Mike Mitchell, Network Engineer AMTECH Systems Corporation, Technology and Manufacturing 8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000 supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
break;
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
default:
m_freem (m);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++ifp->if_oerrors;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
splx (s);
return (EAFNOSUPPORT);
}
/*
* Queue message on interface, and start output if interface
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
* not yet active.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
if (! IF_HANDOFF_ADJ(ifq, m, ifp, 3)) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++ifp->if_oerrors;
Major nit: i've confused link0 and link1 in my brain and/or in either the man page or the source file. Fix this. Minor problem: don't choke with ENETDOWN early. As long as our output queue has space, put the IP packets there even if IPCP ain't up yet. We will eventually be able delivering them once the PPP state machine came up.
1997-05-20 22:54:04 +00:00
return (rv? rv: ENOBUFS);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
/*
* Unlike in sppp_input(), we can always bump the timestamp
* here since sppp_output() is only called on behalf of
* network-layer traffic; control-layer traffic is handled
* by sppp_cp_send().
*/
sp->pp_last_sent = time_second;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
return (0);
}
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
void
sppp_attach(struct ifnet *ifp)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
struct sppp *sp = (struct sppp*) ifp;
/* Initialize keepalive handler. */
if (! spppq)
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
TIMEOUT(sppp_keepalive, 0, hz * 10, keepalive_ch);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/* Insert new entry into the keepalive list. */
sp->pp_next = spppq;
spppq = sp;
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
sp->pp_if.if_mtu = PP_MTU;
sp->pp_if.if_flags = IFF_POINTOPOINT | IFF_MULTICAST;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
sp->pp_if.if_type = IFT_PPP;
sp->pp_if.if_output = sppp_output;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#if 0
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
sp->pp_flags = PP_KEEPALIVE;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#endif
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
sp->pp_if.if_snd.ifq_maxlen = 32;
sp->pp_fastq.ifq_maxlen = 32;
sp->pp_cpq.ifq_maxlen = 20;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
sp->pp_loopcnt = 0;
sp->pp_alivecnt = 0;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
bzero(&sp->pp_seq[0], sizeof(sp->pp_seq));
bzero(&sp->pp_rseq[0], sizeof(sp->pp_rseq));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->pp_phase = PHASE_DEAD;
sp->pp_up = lcp.Up;
sp->pp_down = lcp.Down;
Merge last-minute fix from the i4b file made by gj: Protect mtx_init() invocations with mtx_intialized() checks to avoid a reported panic. MFC after: 1 month
2001-12-30 19:02:27 +00:00
if(!mtx_initialized(&sp->pp_cpq.ifq_mtx))
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&sp->pp_cpq.ifq_mtx, "sppp_cpq", NULL, MTX_DEF);
Merge last-minute fix from the i4b file made by gj: Protect mtx_init() invocations with mtx_intialized() checks to avoid a reported panic. MFC after: 1 month
2001-12-30 19:02:27 +00:00
if(!mtx_initialized(&sp->pp_fastq.ifq_mtx))
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&sp->pp_fastq.ifq_mtx, "sppp_fastq", NULL, MTX_DEF);
Implement timestamps so i4b/driver/i4b_isppp.c can derive the idle time from the PPP packets sent. This effectively merges rev 1.2 of the old i4b_ispppsubr.c, with the exception that i eventually ended up in debugging and fixing it so the idle time is now really detected. ;-) (The version in i4b simply doesn't work right since it still accounts for incoming LCP echo packets which it is supposed to ignore for idle time considerations...) Obtained from: i4b MFC after: 1 month
2001-12-28 15:59:54 +00:00
sp->pp_last_recv = sp->pp_last_sent = time_second;
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
sp->confflags = 0;
#ifdef INET
sp->confflags |= CONF_ENABLE_VJ;
#endif
#ifdef INET6
sp->confflags |= CONF_ENABLE_IPV6;
#endif
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
sp->pp_comp = malloc(sizeof(struct slcompress), M_TEMP, M_WAIT);
sl_compress_init(sp->pp_comp, -1);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_lcp_init(sp);
sppp_ipcp_init(sp);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_ipv6cp_init(sp);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_pap_init(sp);
sppp_chap_init(sp);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
void
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
sppp_detach(struct ifnet *ifp)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
struct sppp **q, *p, *sp = (struct sppp*) ifp;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int i;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/* Remove the entry from the keepalive list. */
for (q = &spppq; (p = *q); q = &p->pp_next)
if (p == sp) {
*q = p->pp_next;
break;
}
/* Stop keepalive handler. */
if (! spppq)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
UNTIMEOUT(sppp_keepalive, 0, keepalive_ch);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
for (i = 0; i < IDX_COUNT; i++)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
UNTIMEOUT((cps[i])->TO, (void *)sp, sp->ch[i]);
UNTIMEOUT(sppp_pap_my_TO, (void *)sp, sp->pap_my_to_ch);
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
mtx_destroy(&sp->pp_cpq.ifq_mtx);
mtx_destroy(&sp->pp_fastq.ifq_mtx);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
/*
* Flush the interface output queue.
*/
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
void
sppp_flush(struct ifnet *ifp)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
struct sppp *sp = (struct sppp*) ifp;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_qflush (&sp->pp_if.if_snd);
sppp_qflush (&sp->pp_fastq);
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
sppp_qflush (&sp->pp_cpq);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
/*
* Check if the output queue is empty.
*/
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
int
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
sppp_isempty(struct ifnet *ifp)
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
{
struct sppp *sp = (struct sppp*) ifp;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int empty, s;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
s = splimp();
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
empty = !sp->pp_fastq.ifq_head && !sp->pp_cpq.ifq_head &&
!sp->pp_if.if_snd.ifq_head;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
splx(s);
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
return (empty);
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
* Get next packet to send.
*/
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
struct mbuf *
sppp_dequeue(struct ifnet *ifp)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
struct sppp *sp = (struct sppp*) ifp;
struct mbuf *m;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int s;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
s = splimp();
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* Process only the control protocol queue until we have at
* least one NCP open.
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
*
* Do always serve all three queues in Cisco mode.
*/
IF_DEQUEUE(&sp->pp_cpq, m);
if (m == NULL &&
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
(sppp_ncp_check(sp) || sp->pp_mode == IFF_CISCO)) {
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
IF_DEQUEUE(&sp->pp_fastq, m);
if (m == NULL)
IF_DEQUEUE (&sp->pp_if.if_snd, m);
}
splx(s);
return m;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/*
* Pick the next packet, do not remove it from the queue.
*/
struct mbuf *
sppp_pick(struct ifnet *ifp)
{
struct sppp *sp = (struct sppp*)ifp;
struct mbuf *m;
int s;
s= splimp ();
m = sp->pp_cpq.ifq_head;
if (m == NULL &&
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
(sp->pp_phase == PHASE_NETWORK || sp->pp_mode == IFF_CISCO))
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if ((m = sp->pp_fastq.ifq_head) == NULL)
m = sp->pp_if.if_snd.ifq_head;
splx (s);
return (m);
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Process an ioctl request. Called on low priority level.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
sppp_ioctl(struct ifnet *ifp, IOCTL_CMD_T cmd, void *data)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
struct ifreq *ifr = (struct ifreq*) data;
struct sppp *sp = (struct sppp*) ifp;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
int s, rv, going_up, going_down, newmode;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
s = splimp();
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
rv = 0;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (cmd) {
case SIOCAIFADDR:
case SIOCSIFDSTADDR:
break;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case SIOCSIFADDR:
For SIOCSIFADDR, don't call if_up() since it would attempt to add the route to the destination twice. Now that brian has fixed route.c to no longer accept this second route, this long-standing nuisance became a showstopper bug for sppp users. In retrospect, this is the same fix as the one in rev 1.78 of if_sl.c; most likely the original version of sppp has been cloned from SLIP. ;-)
2001-12-26 20:28:41 +00:00
/* set the interface "up" when assigning an IP address */
ifp->if_flags |= IFF_UP;
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case SIOCSIFFLAGS:
going_up = ifp->if_flags & IFF_UP &&
(ifp->if_flags & IFF_RUNNING) == 0;
going_down = (ifp->if_flags & IFF_UP) == 0 &&
ifp->if_flags & IFF_RUNNING;
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
newmode = ifp->if_flags & IFF_PASSIVE;
if (!newmode)
newmode = ifp->if_flags & IFF_AUTO;
if (!newmode)
newmode = ifp->if_flags & IFF_CISCO;
ifp->if_flags &= ~(IFF_PASSIVE | IFF_AUTO | IFF_CISCO);
ifp->if_flags |= newmode;
if (newmode != sp->pp_mode) {
going_down = 1;
if (!going_up)
going_up = ifp->if_flags & IFF_RUNNING;
}
if (going_down) {
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
if (sp->pp_mode != IFF_CISCO)
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
lcp.Close(sp);
else if (sp->pp_tlf)
(sp->pp_tlf)(sp);
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
sppp_flush(ifp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
ifp->if_flags &= ~IFF_RUNNING;
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
sp->pp_mode = newmode;
}
if (going_up) {
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
if (sp->pp_mode != IFF_CISCO)
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
lcp.Close(sp);
sp->pp_mode = newmode;
if (sp->pp_mode == 0) {
ifp->if_flags |= IFF_RUNNING;
lcp.Open(sp);
}
if (sp->pp_mode == IFF_CISCO) {
if (sp->pp_tls)
(sp->pp_tls)(sp);
ifp->if_flags |= IFF_RUNNING;
}
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
#ifdef SIOCSIFMTU
#ifndef ifr_mtu
#define ifr_mtu ifr_metric
#endif
case SIOCSIFMTU:
if (ifr->ifr_mtu < 128 || ifr->ifr_mtu > sp->lcp.their_mru)
return (EINVAL);
ifp->if_mtu = ifr->ifr_mtu;
break;
#endif
#ifdef SLIOCSETMTU
case SLIOCSETMTU:
if (*(short*)data < 128 || *(short*)data > sp->lcp.their_mru)
return (EINVAL);
ifp->if_mtu = *(short*)data;
break;
#endif
#ifdef SIOCGIFMTU
case SIOCGIFMTU:
ifr->ifr_mtu = ifp->if_mtu;
break;
#endif
#ifdef SLIOCGETMTU
case SLIOCGETMTU:
*(short*)data = ifp->if_mtu;
break;
#endif
case SIOCADDMULTI:
case SIOCDELMULTI:
break;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case SIOCGIFGENERIC:
case SIOCSIFGENERIC:
rv = sppp_params(sp, cmd, data);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
default:
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
rv = ENOTTY;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
splx(s);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return rv;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Cisco framing implementation.
*/
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Handle incoming Cisco keepalive protocol packets.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cisco_input(struct sppp *sp, struct mbuf *m)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
STDDCL;
struct cisco_packet *h;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
u_long me, mymask;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
PR: kern/4117 Reviewed by: ishii@csl.sony.co.jp, kjc@csl.sony.co.jp checked with FreeBSD+Riscom - cisco4500 configuration.
1997-08-06 01:43:09 +00:00
if (m->m_pkthdr.len < CISCO_PACKET_LEN) {
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "cisco invalid packet length: %d bytes\n",
SPP_ARGS(ifp), m->m_pkthdr.len);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
return;
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
h = mtod (m, struct cisco_packet*);
if (debug)
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "cisco input: %d bytes "
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
"<0x%lx 0x%lx 0x%lx 0x%x 0x%x-0x%x>\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), m->m_pkthdr.len,
(u_long)ntohl (h->type), (u_long)h->par1, (u_long)h->par2, (u_int)h->rel,
(u_int)h->time0, (u_int)h->time1);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (ntohl (h->type)) {
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
default:
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "cisco unknown packet type: 0x%lx\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), (u_long)ntohl (h->type));
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case CISCO_ADDR_REPLY:
/* Reply on address request, ignore */
break;
case CISCO_KEEPALIVE_REQ:
sp->pp_alivecnt = 0;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_rseq[IDX_LCP] = ntohl (h->par1);
if (sp->pp_seq[IDX_LCP] == sp->pp_rseq[IDX_LCP]) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Local and remote sequence numbers are equal.
* Probably, the line is in loopback mode. */
if (sp->pp_loopcnt >= MAXALIVECNT) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf (SPP_FMT "loopback\n",
SPP_ARGS(ifp));
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
sp->pp_loopcnt = 0;
if (ifp->if_flags & IFF_UP) {
if_down (ifp);
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
sppp_qflush (&sp->pp_cpq);
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
}
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
}
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
++sp->pp_loopcnt;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Generate new local sequence number */
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_seq[IDX_LCP] = random();
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_seq[IDX_LCP] ^= time.tv_sec ^ time.tv_usec;
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
break;
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->pp_loopcnt = 0;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
if (! (ifp->if_flags & IFF_UP) &&
(ifp->if_flags & IFF_RUNNING)) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if_up(ifp);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf (SPP_FMT "up\n", SPP_ARGS(ifp));
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
}
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case CISCO_ADDR_REQ:
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_get_ip_addrs(sp, &me, 0, &mymask);
if (me != 0L)
sppp_cisco_send(sp, CISCO_ADDR_REPLY, me, mymask);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
}
}
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Send Cisco keepalive packet.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void
sppp_cisco_send(struct sppp *sp, int type, long par1, long par2)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
STDDCL;
struct ppp_header *h;
struct cisco_packet *ch;
struct mbuf *m;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Time changes mark 2: * Figure out UTC relative to boottime. Four new functions provide time relative to boottime. * move "runtime" into struct proc. This helps fix the calcru() problem in SMP. * kill mono_time. * add timespec{add|sub|cmp} macros to time.h. (XXX: These may change!) * nanosleep, select & poll takes long sleeps one day at a time Reviewed by: bde Tested by: ache and others
1998-04-04 13:26:20 +00:00
struct timeval tv;
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
u_long t = (time.tv_sec - boottime.tv_sec) * 1000;
#endif
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
s/nanoruntime/nanouptime/g s/microruntime/microuptime/g Reviewed by: bde
1998-05-17 11:53:46 +00:00
getmicrouptime(&tv);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
MGETHDR (m, M_DONTWAIT, MT_DATA);
if (! m)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
return;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
m->m_pkthdr.len = m->m_len = PPP_HEADER_LEN + CISCO_PACKET_LEN;
m->m_pkthdr.rcvif = 0;
h = mtod (m, struct ppp_header*);
h->address = CISCO_MULTICAST;
h->control = 0;
h->protocol = htons (CISCO_KEEPALIVE);
ch = (struct cisco_packet*) (h + 1);
ch->type = htonl (type);
ch->par1 = htonl (par1);
ch->par2 = htonl (par2);
ch->rel = -1;
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Time changes mark 2: * Figure out UTC relative to boottime. Four new functions provide time relative to boottime. * move "runtime" into struct proc. This helps fix the calcru() problem in SMP. * kill mono_time. * add timespec{add|sub|cmp} macros to time.h. (XXX: These may change!) * nanosleep, select & poll takes long sleeps one day at a time Reviewed by: bde Tested by: ache and others
1998-04-04 13:26:20 +00:00
ch->time0 = htons ((u_short) (tv.tv_sec >> 16));
ch->time1 = htons ((u_short) tv.tv_sec);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
ch->time0 = htons ((u_short) (t >> 16));
ch->time1 = htons ((u_short) t);
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "cisco output: <0x%lx 0x%lx 0x%lx 0x%x 0x%x-0x%x>\n",
SPP_ARGS(ifp), (u_long)ntohl (ch->type), (u_long)ch->par1,
(u_long)ch->par2, (u_int)ch->rel, (u_int)ch->time0, (u_int)ch->time1);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
if (! IF_HANDOFF_ADJ(&sp->pp_cpq, m, ifp, 3))
ifp->if_oerrors++;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* PPP protocol implementation.
*/
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Send PPP control protocol packet.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
sppp_cp_send(struct sppp *sp, u_short proto, u_char type,
u_char ident, u_short len, void *data)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
STDDCL;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
struct ppp_header *h;
struct lcp_header *lh;
struct mbuf *m;
if (len > MHLEN - PPP_HEADER_LEN - LCP_HEADER_LEN)
len = MHLEN - PPP_HEADER_LEN - LCP_HEADER_LEN;
MGETHDR (m, M_DONTWAIT, MT_DATA);
if (! m)
return;
m->m_pkthdr.len = m->m_len = PPP_HEADER_LEN + LCP_HEADER_LEN + len;
m->m_pkthdr.rcvif = 0;
h = mtod (m, struct ppp_header*);
h->address = PPP_ALLSTATIONS; /* broadcast address */
h->control = PPP_UI; /* Unnumbered Info */
h->protocol = htons (proto); /* Link Control Protocol */
lh = (struct lcp_header*) (h + 1);
lh->type = type;
lh->ident = ident;
lh->len = htons (LCP_HEADER_LEN + len);
if (len)
bcopy (data, lh+1, len);
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s output <%s id=0x%x len=%d",
SPP_ARGS(ifp),
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_proto_name(proto),
sppp_cp_type_name (lh->type), lh->ident,
ntohs (lh->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes ((u_char*) (lh+1), len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
if (! IF_HANDOFF_ADJ(&sp->pp_cpq, m, ifp, 3))
ifp->if_oerrors++;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Handle incoming PPP control protocol packets.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_input(const struct cp *cp, struct sppp *sp, struct mbuf *m)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
STDDCL;
struct lcp_header *h;
int len = m->m_pkthdr.len;
int rv;
u_char *p;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (len < 4) {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "%s invalid packet length: %d bytes\n",
SPP_ARGS(ifp), cp->name, len);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
return;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
h = mtod (m, struct lcp_header*);
if (debug) {
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "%s input(%s): <%s id=0x%x len=%d",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]),
sppp_cp_type_name (h->type), h->ident, ntohs (h->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes ((u_char*) (h+1), len-4);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
if (len > ntohs (h->len))
len = ntohs (h->len);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
p = (u_char *)(h + 1);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (h->type) {
case CONF_REQ:
if (len < 4) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "%s invalid conf-req length %d\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
len);
++ifp->if_ierrors;
break;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* handle states where RCR doesn't get a SCA/SCN */
switch (sp->state[cp->protoidx]) {
case STATE_CLOSING:
case STATE_STOPPING:
return;
case STATE_CLOSED:
sppp_cp_send(sp, cp->proto, TERM_ACK, h->ident,
0, 0);
return;
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
rv = (cp->RCR)(sp, h, len);
switch (sp->state[cp->protoidx]) {
case STATE_OPENED:
(cp->tld)(sp);
(cp->scr)(sp);
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_ACK_SENT:
case STATE_REQ_SENT:
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
* sppp_cp_change_state() have the side effect of
* restarting the timeouts. We want to avoid that
* if the state don't change, otherwise we won't
* ever timeout and resend a configuration request
* that got lost.
*/
if (sp->state[cp->protoidx] == (rv ? STATE_ACK_SENT:
STATE_REQ_SENT))
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_change_state(cp, sp, rv?
STATE_ACK_SENT: STATE_REQ_SENT);
break;
case STATE_STOPPED:
sp->rst_counter[cp->protoidx] = sp->lcp.max_configure;
(cp->scr)(sp);
sppp_cp_change_state(cp, sp, rv?
STATE_ACK_SENT: STATE_REQ_SENT);
break;
case STATE_ACK_RCVD:
if (rv) {
sppp_cp_change_state(cp, sp, STATE_OPENED);
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s tlu\n",
SPP_ARGS(ifp),
Fix a couple of log()'s that came out with the wrong (default) log level, as opposed to LOG_DEBUG.
1997-05-23 20:40:15 +00:00
cp->name);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cp->tlu)(sp);
} else
sppp_cp_change_state(cp, sp, STATE_ACK_RCVD);
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case CONF_ACK:
if (h->ident != sp->confid[cp->protoidx]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "%s id mismatch 0x%x != 0x%x\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
h->ident, sp->confid[cp->protoidx]);
++ifp->if_ierrors;
break;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (sp->state[cp->protoidx]) {
case STATE_CLOSED:
case STATE_STOPPED:
sppp_cp_send(sp, cp->proto, TERM_ACK, h->ident, 0, 0);
break;
case STATE_CLOSING:
case STATE_STOPPING:
break;
case STATE_REQ_SENT:
sp->rst_counter[cp->protoidx] = sp->lcp.max_configure;
sppp_cp_change_state(cp, sp, STATE_ACK_RCVD);
break;
case STATE_OPENED:
(cp->tld)(sp);
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_ACK_RCVD:
(cp->scr)(sp);
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
case STATE_ACK_SENT:
sp->rst_counter[cp->protoidx] = sp->lcp.max_configure;
sppp_cp_change_state(cp, sp, STATE_OPENED);
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s tlu\n",
SPP_ARGS(ifp), cp->name);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cp->tlu)(sp);
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case CONF_NAK:
case CONF_REJ:
if (h->ident != sp->confid[cp->protoidx]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "%s id mismatch 0x%x != 0x%x\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
h->ident, sp->confid[cp->protoidx]);
++ifp->if_ierrors;
break;
}
if (h->type == CONF_NAK)
(cp->RCN_nak)(sp, h, len);
else /* CONF_REJ */
(cp->RCN_rej)(sp, h, len);
switch (sp->state[cp->protoidx]) {
case STATE_CLOSED:
case STATE_STOPPED:
sppp_cp_send(sp, cp->proto, TERM_ACK, h->ident, 0, 0);
break;
case STATE_REQ_SENT:
case STATE_ACK_SENT:
sp->rst_counter[cp->protoidx] = sp->lcp.max_configure;
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
* Slow things down a bit if we think we might be
* in loopback. Depend on the timeout to send the
* next configuration request.
*/
if (sp->pp_loopcnt)
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cp->scr)(sp);
break;
case STATE_OPENED:
(cp->tld)(sp);
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_ACK_RCVD:
When getting a RCN event in state ACK_RCVD, RFC 1661 demands that we go to REQ_SENT (and we probably should also log this since it should only happen in a cross-linked connection). Submitted by: Mark Tinguely <tinguely@plains.NoDak.edu>
1999-10-29 17:57:42 +00:00
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cp->scr)(sp);
break;
case STATE_CLOSING:
case STATE_STOPPING:
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case TERM_REQ:
switch (sp->state[cp->protoidx]) {
case STATE_ACK_RCVD:
case STATE_ACK_SENT:
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_CLOSED:
case STATE_STOPPED:
case STATE_CLOSING:
case STATE_STOPPING:
case STATE_REQ_SENT:
sta:
/* Send Terminate-Ack packet. */
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s send terminate-ack\n",
SPP_ARGS(ifp), cp->name);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send(sp, cp->proto, TERM_ACK, h->ident, 0, 0);
break;
case STATE_OPENED:
(cp->tld)(sp);
sp->rst_counter[cp->protoidx] = 0;
sppp_cp_change_state(cp, sp, STATE_STOPPING);
goto sta;
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case TERM_ACK:
switch (sp->state[cp->protoidx]) {
case STATE_CLOSED:
case STATE_STOPPED:
case STATE_REQ_SENT:
case STATE_ACK_SENT:
break;
case STATE_CLOSING:
sppp_cp_change_state(cp, sp, STATE_CLOSED);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tlf)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_STOPPING:
sppp_cp_change_state(cp, sp, STATE_STOPPED);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tlf)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_ACK_RCVD:
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
case STATE_OPENED:
(cp->tld)(sp);
(cp->scr)(sp);
sppp_cp_change_state(cp, sp, STATE_ACK_RCVD);
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case CODE_REJ:
/* XXX catastrophic rejects (RXJ-) aren't handled yet. */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
log(LOG_INFO,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "%s: ignoring RXJ (%s) for proto 0x%x, "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"danger will robinson\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), cp->name,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_cp_type_name(h->type), ntohs(*((u_short *)p)));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (sp->state[cp->protoidx]) {
case STATE_CLOSED:
case STATE_STOPPED:
case STATE_REQ_SENT:
case STATE_ACK_SENT:
case STATE_CLOSING:
case STATE_STOPPING:
case STATE_OPENED:
break;
case STATE_ACK_RCVD:
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
If LCP proto-rej is received, drop the protocol mentioned by the message. This is to be friendly with non-IPv6 peer (If the peer complains due to lack of IPv6CP, drop IPv6CP). This basically implements "RXJ+" state transition in the RFC. Obtained from: NetBSD
2001-07-31 07:27:01 +00:00
case PROTO_REJ:
{
int catastrophic;
const struct cp *upper;
int i;
u_int16_t proto;
catastrophic = 0;
upper = NULL;
proto = ntohs(*((u_int16_t *)p));
for (i = 0; i < IDX_COUNT; i++) {
if (cps[i]->proto == proto) {
upper = cps[i];
break;
}
}
if (upper == NULL)
catastrophic++;
Don't log RXJ+ protocol rejects unless we are in debug mode. (RXJ- events are always logged.) This stops sppp from spamming the syslog files in case the remote peer is not configured to negotiate IPv6.
2001-12-26 22:36:59 +00:00
if (catastrophic || debug)
log(catastrophic? LOG_INFO: LOG_DEBUG,
SPP_FMT "%s: RXJ%c (%s) for proto 0x%x (%s/%s)\n",
SPP_ARGS(ifp), cp->name, catastrophic ? '-' : '+',
sppp_cp_type_name(h->type), proto,
upper ? upper->name : "unknown",
upper ? sppp_state_name(sp->state[upper->protoidx]) : "?");
If LCP proto-rej is received, drop the protocol mentioned by the message. This is to be friendly with non-IPv6 peer (If the peer complains due to lack of IPv6CP, drop IPv6CP). This basically implements "RXJ+" state transition in the RFC. Obtained from: NetBSD
2001-07-31 07:27:01 +00:00
/*
* if we got RXJ+ against conf-req, the peer does not implement
* this particular protocol type. terminate the protocol.
*/
if (upper && !catastrophic) {
if (sp->state[upper->protoidx] == STATE_REQ_SENT) {
upper->Close(sp);
break;
}
}
/* XXX catastrophic rejects (RXJ-) aren't handled yet. */
switch (sp->state[cp->protoidx]) {
case STATE_CLOSED:
case STATE_STOPPED:
case STATE_REQ_SENT:
case STATE_ACK_SENT:
case STATE_CLOSING:
case STATE_STOPPING:
case STATE_OPENED:
break;
case STATE_ACK_RCVD:
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
default:
printf(SPP_FMT "%s illegal %s in state %s\n",
SPP_ARGS(ifp), cp->name,
sppp_cp_type_name(h->type),
sppp_state_name(sp->state[cp->protoidx]));
++ifp->if_ierrors;
}
break;
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case DISC_REQ:
if (cp->proto != PPP_LCP)
goto illegal;
/* Discard the packet. */
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case ECHO_REQ:
if (cp->proto != PPP_LCP)
goto illegal;
if (sp->state[cp->protoidx] != STATE_OPENED) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "lcp echo req but lcp closed\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++ifp->if_ierrors;
break;
}
if (len < 8) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "invalid lcp echo request "
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
"packet length: %d bytes\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), len);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
if ((sp->lcp.opts & (1 << LCP_OPT_MAGIC)) &&
ntohl (*(long*)(h+1)) == sp->lcp.magic) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Line loopback mode detected. */
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "loopback\n", SPP_ARGS(ifp));
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
sp->pp_loopcnt = MAXALIVECNT * 5;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if_down (ifp);
Introduce a third queue per interface, serving only PPP control protocol packets. This queue is the only one being enabled until network phase has been reached.
1997-05-22 22:15:39 +00:00
sppp_qflush (&sp->pp_cpq);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Shut down the PPP link. */
/* XXX */
lcp.Down(sp);
lcp.Up(sp);
break;
}
*(long*)(h+1) = htonl (sp->lcp.magic);
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "got lcp echo req, sending echo rep\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send (sp, PPP_LCP, ECHO_REPLY, h->ident, len-4, h+1);
break;
case ECHO_REPLY:
if (cp->proto != PPP_LCP)
goto illegal;
if (h->ident != sp->lcp.echoid) {
++ifp->if_ierrors;
break;
}
if (len < 8) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "lcp invalid echo reply "
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
"packet length: %d bytes\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), len);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "lcp got echo rep\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
if (!(sp->lcp.opts & (1 << LCP_OPT_MAGIC)) ||
ntohl (*(long*)(h+1)) != sp->lcp.magic)
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->pp_alivecnt = 0;
break;
default:
/* Unknown packet type -- send Code-Reject packet. */
illegal:
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, SPP_FMT "%s send code-rej for 0x%x\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), cp->name, h->type);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_send(sp, cp->proto, CODE_REJ,
++sp->pp_seq[cp->protoidx], m->m_pkthdr.len, h);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++ifp->if_ierrors;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* The generic part of all Up/Down/Open/Close/TO event handlers.
* Basically, the state transition handling in the automaton.
*/
static void
sppp_up_event(const struct cp *cp, struct sppp *sp)
{
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s up(%s)\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]));
switch (sp->state[cp->protoidx]) {
case STATE_INITIAL:
sppp_cp_change_state(cp, sp, STATE_CLOSED);
break;
case STATE_STARTING:
sp->rst_counter[cp->protoidx] = sp->lcp.max_configure;
(cp->scr)(sp);
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal up in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]));
}
}
static void
sppp_down_event(const struct cp *cp, struct sppp *sp)
{
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s down(%s)\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]));
switch (sp->state[cp->protoidx]) {
case STATE_CLOSED:
case STATE_CLOSING:
sppp_cp_change_state(cp, sp, STATE_INITIAL);
break;
case STATE_STOPPED:
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
sppp_cp_change_state(cp, sp, STATE_STARTING);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cp->tls)(sp);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_STOPPING:
case STATE_REQ_SENT:
case STATE_ACK_RCVD:
case STATE_ACK_SENT:
sppp_cp_change_state(cp, sp, STATE_STARTING);
break;
case STATE_OPENED:
(cp->tld)(sp);
sppp_cp_change_state(cp, sp, STATE_STARTING);
break;
default:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf(SPP_FMT "%s illegal down in state %s\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]));
}
}
static void
sppp_open_event(const struct cp *cp, struct sppp *sp)
{
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s open(%s)\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]));
switch (sp->state[cp->protoidx]) {
case STATE_INITIAL:
sppp_cp_change_state(cp, sp, STATE_STARTING);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tls)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_STARTING:
break;
case STATE_CLOSED:
sp->rst_counter[cp->protoidx] = sp->lcp.max_configure;
(cp->scr)(sp);
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
case STATE_STOPPED:
(MFC candidate, see below). When we get an Open event in stopped state, experience shows that this is usually means we've somehow missed a previous Down event. This has occasionally bitten people for the IPCP layer with ISDN, apparently a previously aborted IPCP negotiation must have caused this. As a bandaid, we quickly pretent a Down event by advancing to starting state; this effectively implements the `restart' option mentioned in RFC 1663. While i'm not yet fully convinced this is the best thing to do (and is fully compliant with RFC 1661), i've seen a number of reports here on the German mailing lists where people have been bitten by the previous behaviour which usually causes quickly looping ISDN reconnects (thus loss of money...), and where just this patch fixes the problem. For this, i'd even like to see it MFC'd if possible. Submitted by: Helmut Kreft <kreft@zeus.ai-lab.fh-furtwangen.de>
2001-03-23 19:51:12 +00:00
/*
* Try escaping stopped state. This seems to bite
* people occasionally, in particular for IPCP,
* presumably following previous IPCP negotiation
* aborts. Somehow, we must have missed a Down event
* which would have caused a transition into starting
* state, so as a bandaid we force the Down event now.
* This effectively implements (something like the)
* `restart' option mentioned in the state transition
* table of RFC 1661.
*/
sppp_cp_change_state(cp, sp, STATE_STARTING);
(cp->tls)(sp);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_STOPPING:
case STATE_REQ_SENT:
case STATE_ACK_RCVD:
case STATE_ACK_SENT:
case STATE_OPENED:
break;
case STATE_CLOSING:
sppp_cp_change_state(cp, sp, STATE_STOPPING);
break;
}
}
static void
sppp_close_event(const struct cp *cp, struct sppp *sp)
{
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s close(%s)\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]));
switch (sp->state[cp->protoidx]) {
case STATE_INITIAL:
case STATE_CLOSED:
case STATE_CLOSING:
break;
case STATE_STARTING:
sppp_cp_change_state(cp, sp, STATE_INITIAL);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tlf)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_STOPPED:
sppp_cp_change_state(cp, sp, STATE_CLOSED);
break;
case STATE_STOPPING:
sppp_cp_change_state(cp, sp, STATE_CLOSING);
break;
case STATE_OPENED:
(cp->tld)(sp);
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case STATE_REQ_SENT:
case STATE_ACK_RCVD:
case STATE_ACK_SENT:
sp->rst_counter[cp->protoidx] = sp->lcp.max_terminate;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_send(sp, cp->proto, TERM_REQ,
++sp->pp_seq[cp->protoidx], 0, 0);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_change_state(cp, sp, STATE_CLOSING);
break;
}
}
static void
sppp_to_event(const struct cp *cp, struct sppp *sp)
{
STDDCL;
int s;
s = splimp();
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s TO(%s) rst_counter = %d\n",
SPP_ARGS(ifp), cp->name,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_state_name(sp->state[cp->protoidx]),
sp->rst_counter[cp->protoidx]);
if (--sp->rst_counter[cp->protoidx] < 0)
/* TO- event */
switch (sp->state[cp->protoidx]) {
case STATE_CLOSING:
sppp_cp_change_state(cp, sp, STATE_CLOSED);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tlf)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_STOPPING:
sppp_cp_change_state(cp, sp, STATE_STOPPED);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tlf)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_REQ_SENT:
case STATE_ACK_RCVD:
case STATE_ACK_SENT:
sppp_cp_change_state(cp, sp, STATE_STOPPED);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
(cp->tlf)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
else
/* TO+ event */
switch (sp->state[cp->protoidx]) {
case STATE_CLOSING:
case STATE_STOPPING:
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_send(sp, cp->proto, TERM_REQ,
++sp->pp_seq[cp->protoidx], 0, 0);
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
TIMEOUT(cp->TO, (void *)sp, sp->lcp.timeout,
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
sp->ch[cp->protoidx]);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case STATE_REQ_SENT:
case STATE_ACK_RCVD:
(cp->scr)(sp);
/* sppp_cp_change_state() will restart the timer */
sppp_cp_change_state(cp, sp, STATE_REQ_SENT);
break;
case STATE_ACK_SENT:
(cp->scr)(sp);
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
TIMEOUT(cp->TO, (void *)sp, sp->lcp.timeout,
sp->ch[cp->protoidx]);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
splx(s);
}
/*
* Change the state of a control protocol in the state automaton.
* Takes care of starting/stopping the restart timer.
*/
void
sppp_cp_change_state(const struct cp *cp, struct sppp *sp, int newstate)
{
sp->state[cp->protoidx] = newstate;
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
UNTIMEOUT(cp->TO, (void *)sp, sp->ch[cp->protoidx]);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (newstate) {
case STATE_INITIAL:
case STATE_STARTING:
case STATE_CLOSED:
case STATE_STOPPED:
case STATE_OPENED:
break;
case STATE_CLOSING:
case STATE_STOPPING:
case STATE_REQ_SENT:
case STATE_ACK_RCVD:
case STATE_ACK_SENT:
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
TIMEOUT(cp->TO, (void *)sp, sp->lcp.timeout,
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
sp->ch[cp->protoidx]);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*--------------------------------------------------------------------------*
* *
* The LCP implementation. *
* *
*--------------------------------------------------------------------------*
*/
static void
sppp_lcp_init(struct sppp *sp)
{
sp->lcp.opts = (1 << LCP_OPT_MAGIC);
sp->lcp.magic = 0;
sp->state[IDX_LCP] = STATE_INITIAL;
sp->fail_counter[IDX_LCP] = 0;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_seq[IDX_LCP] = 0;
sp->pp_rseq[IDX_LCP] = 0;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->lcp.protos = 0;
sp->lcp.mru = sp->lcp.their_mru = PP_MTU;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
/* Note that these values are relevant for all control protocols */
sp->lcp.timeout = 3 * hz;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->lcp.max_terminate = 2;
sp->lcp.max_configure = 10;
sp->lcp.max_failure = 10;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
callout_handle_init(&sp->ch[IDX_LCP]);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
static void
sppp_lcp_up(struct sppp *sp)
{
STDDCL;
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
sp->pp_alivecnt = 0;
sp->lcp.opts = (1 << LCP_OPT_MAGIC);
sp->lcp.magic = 0;
sp->lcp.protos = 0;
sp->lcp.mru = sp->lcp.their_mru = PP_MTU;
Move the decision whether we want to request authentication from our peer out from sppp_lcp_open() to sppp_lcp_up(). For one, this makes things look more symmetrical to sppp_lcp_close(), and somehow it also just occurred to me that an Up event following the open caused the value of the authentication option to be clobbered.
2001-04-08 20:29:09 +00:00
/*
* If we are authenticator, negotiate LCP_AUTH
*/
if (sp->hisauth.proto != 0)
sp->lcp.opts |= (1 << LCP_OPT_AUTH_PROTO);
else
sp->lcp.opts &= ~(1 << LCP_OPT_AUTH_PROTO);
sp->pp_flags &= ~PP_NEEDAUTH;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* If this interface is passive or dial-on-demand, and we are
* still in Initial state, it means we've got an incoming
* call. Activate the interface.
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
if ((ifp->if_flags & (IFF_AUTO | IFF_PASSIVE)) != 0) {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "Up event", SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
ifp->if_flags |= IFF_RUNNING;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (sp->state[IDX_LCP] == STATE_INITIAL) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "(incoming call)\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->pp_flags |= PP_CALLIN;
lcp.Open(sp);
} else if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
We explicitly close LCP when going to state CLOSED, so we better open it again when going from INITIAL to STARTING. This has been done for passive or auto-conecting interfaces always, but not for permanent ones. Obtained from: NetBSD (rev 1.32)
2001-12-30 18:39:38 +00:00
} else if ((ifp->if_flags & (IFF_AUTO | IFF_PASSIVE)) == 0 &&
(sp->state[IDX_LCP] == STATE_INITIAL)) {
ifp->if_flags |= IFF_RUNNING;
lcp.Open(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
sppp_up_event(&lcp, sp);
}
static void
sppp_lcp_down(struct sppp *sp)
{
STDDCL;
sppp_down_event(&lcp, sp);
/*
* If this is neither a dial-on-demand nor a passive
* interface, simulate an ``ifconfig down'' action, so the
* administrator can force a redial by another ``ifconfig
* up''. XXX For leased line operation, should we immediately
* try to reopen the connection here?
*/
if ((ifp->if_flags & (IFF_AUTO | IFF_PASSIVE)) == 0) {
log(LOG_INFO,
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
SPP_FMT "Down event, taking interface down.\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if_down(ifp);
} else {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "Down event (carrier loss)\n",
SPP_ARGS(ifp));
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
sp->pp_flags &= ~PP_CALLIN;
if (sp->state[IDX_LCP] != STATE_INITIAL)
lcp.Close(sp);
ifp->if_flags &= ~IFF_RUNNING;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
}
static void
sppp_lcp_open(struct sppp *sp)
{
sppp_open_event(&lcp, sp);
}
static void
sppp_lcp_close(struct sppp *sp)
{
sppp_close_event(&lcp, sp);
}
static void
sppp_lcp_TO(void *cookie)
{
sppp_to_event(&lcp, (struct sppp *)cookie);
}
/*
* Analyze a configure request. Return true if it was agreeable, and
* caused action sca, false if it has been rejected or nak'ed, and
* caused action scn. (The return value is used to make the state
* transition decision in the state automaton.)
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
*/
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static int
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_lcp_RCR(struct sppp *sp, struct lcp_header *h, int len)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
STDDCL;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
u_char *buf, *r, *p;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int origlen, rlen;
u_long nmagic;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
u_short authproto;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
len -= 4;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
origlen = len;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
buf = r = malloc (len, M_TEMP, M_NOWAIT);
if (! buf)
return (0);
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "lcp parse opts: ",
SPP_ARGS(ifp));
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* pass 1: check for things that need to be rejected */
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
p = (void*) (h+1);
for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_lcp_opt_name(*p));
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
switch (*p) {
case LCP_OPT_MAGIC:
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Magic number. */
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
if (len >= 6 && p[1] == 6)
continue;
if (debug)
log(-1, "[invalid] ");
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case LCP_OPT_ASYNC_MAP:
/* Async control character map. */
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
if (len >= 6 && p[1] == 6)
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
continue;
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[invalid] ");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
case LCP_OPT_MRU:
/* Maximum receive unit. */
if (len >= 4 && p[1] == 4)
continue;
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[invalid] ");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case LCP_OPT_AUTH_PROTO:
if (len < 4) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[invalid] ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
break;
}
authproto = (p[2] << 8) + p[3];
if (authproto == PPP_CHAP && p[1] != 5) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[invalid chap len] ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
break;
}
if (sp->myauth.proto == 0) {
/* we are not configured to do auth */
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[not configured] ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
break;
}
/*
* Remote want us to authenticate, remember this,
* so we stay in PHASE_AUTHENTICATE after LCP got
* up.
*/
sp->pp_flags |= PP_NEEDAUTH;
continue;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
default:
/* Others not supported. */
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[rej] ");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
/* Add the option to rejected list. */
bcopy (p, r, p[1]);
r += p[1];
rlen += p[1];
}
if (rlen) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " send conf-rej\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send (sp, PPP_LCP, CONF_REJ, h->ident, rlen, buf);
return 0;
} else if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* pass 2: check for option values that are unacceptable and
* thus require to be nak'ed.
*/
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "lcp parse opt values: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
len = origlen;
for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_lcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
case LCP_OPT_MAGIC:
/* Magic number -- extract. */
nmagic = (u_long)p[2] << 24 |
(u_long)p[3] << 16 | p[4] << 8 | p[5];
if (nmagic != sp->lcp.magic) {
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
sp->pp_loopcnt = 0;
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "0x%lx ", nmagic);
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
continue;
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
if (debug && sp->pp_loopcnt < MAXALIVECNT*5)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[glitch] ");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
++sp->pp_loopcnt;
/*
* We negate our magic here, and NAK it. If
* we see it later in an NAK packet, we
* suggest a new one.
*/
nmagic = ~sp->lcp.magic;
/* Gonna NAK it. */
p[2] = nmagic >> 24;
p[3] = nmagic >> 16;
p[4] = nmagic >> 8;
p[5] = nmagic;
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
case LCP_OPT_ASYNC_MAP:
Ignore (and silently conf-ack) conf-reqs for an Async-Control- Character-Map. RFC 1662 demands it for the sake of async to sync PPP protocol converters (like Win9* :). This merges rev 1.26/1.27 of the old i4b sppp changes.
2001-12-26 22:00:13 +00:00
/*
* Async control character map -- just ignore it.
*
* Quote from RFC 1662, chapter 6:
* To enable this functionality, synchronous PPP
* implementations MUST always respond to the
* Async-Control-Character-Map Configuration
* Option with the LCP Configure-Ack. However,
* acceptance of the Configuration Option does
* not imply that the synchronous implementation
* will do any ACCM mapping. Instead, all such
* octet mapping will be performed by the
* asynchronous-to-synchronous converter.
*/
continue;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case LCP_OPT_MRU:
/*
* Maximum receive unit. Always agreeable,
* but ignored by now.
*/
sp->lcp.their_mru = p[2] * 256 + p[3];
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "%lu ", sp->lcp.their_mru);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
continue;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case LCP_OPT_AUTH_PROTO:
authproto = (p[2] << 8) + p[3];
if (sp->myauth.proto != authproto) {
/* not agreed, nak */
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[mine %s != his %s] ",
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_proto_name(sp->hisauth.proto),
sppp_proto_name(authproto));
p[2] = sp->myauth.proto >> 8;
p[3] = sp->myauth.proto;
break;
}
if (authproto == PPP_CHAP && p[4] != CHAP_MD5) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[chap not MD5] ");
Fix a =/== confusion that caused the CHAP type renegotiation to completely fail. Obtained from: The isdn4bsd project (original author unknown right now)
1998-10-05 21:02:30 +00:00
p[4] = CHAP_MD5;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
break;
}
continue;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
/* Add the option to nak'ed list. */
bcopy (p, r, p[1]);
r += p[1];
rlen += p[1];
}
if (rlen) {
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
* Local and remote magics equal -- loopback?
*/
if (sp->pp_loopcnt >= MAXALIVECNT*5) {
if (sp->pp_loopcnt == MAXALIVECNT*5)
printf (SPP_FMT "loopback\n",
SPP_ARGS(ifp));
if (ifp->if_flags & IFF_UP) {
if_down(ifp);
sppp_qflush(&sp->pp_cpq);
/* XXX ? */
lcp.Down(sp);
lcp.Up(sp);
}
} else if (++sp->fail_counter[IDX_LCP] >= sp->lcp.max_failure) {
Implement the LCP fail_counter: if an option has been NAK'ed for more than max_failures attempts, we are going to REJ it, to prevent endless NAK loops. (This is actually part of a larger local set of modifications i'm running with, but the remainder (PAP & CHAP) ain't ready for prime- time yet.)
1997-08-10 14:28:16 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " max_failure (%d) exceeded, "
Implement the LCP fail_counter: if an option has been NAK'ed for more than max_failures attempts, we are going to REJ it, to prevent endless NAK loops. (This is actually part of a larger local set of modifications i'm running with, but the remainder (PAP & CHAP) ain't ready for prime- time yet.)
1997-08-10 14:28:16 +00:00
"send conf-rej\n",
sp->lcp.max_failure);
sppp_cp_send(sp, PPP_LCP, CONF_REJ, h->ident, rlen, buf);
} else {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " send conf-nak\n");
Implement the LCP fail_counter: if an option has been NAK'ed for more than max_failures attempts, we are going to REJ it, to prevent endless NAK loops. (This is actually part of a larger local set of modifications i'm running with, but the remainder (PAP & CHAP) ain't ready for prime- time yet.)
1997-08-10 14:28:16 +00:00
sppp_cp_send (sp, PPP_LCP, CONF_NAK, h->ident, rlen, buf);
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
} else {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " send conf-ack\n");
Implement the LCP fail_counter: if an option has been NAK'ed for more than max_failures attempts, we are going to REJ it, to prevent endless NAK loops. (This is actually part of a larger local set of modifications i'm running with, but the remainder (PAP & CHAP) ain't ready for prime- time yet.)
1997-08-10 14:28:16 +00:00
sp->fail_counter[IDX_LCP] = 0;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->pp_loopcnt = 0;
sppp_cp_send (sp, PPP_LCP, CONF_ACK,
h->ident, origlen, h+1);
}
free (buf, M_TEMP);
return (rlen == 0);
}
/*
* Analyze the LCP Configure-Reject option list, and adjust our
* negotiation.
*/
static void
sppp_lcp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len)
{
STDDCL;
u_char *buf, *p;
len -= 4;
buf = malloc (len, M_TEMP, M_NOWAIT);
if (!buf)
return;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "lcp rej opts: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
for (; len > 1 && p[1]; len -= p[1], p += p[1]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_lcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
case LCP_OPT_MAGIC:
/* Magic number -- can't use it, use 0 */
sp->lcp.opts &= ~(1 << LCP_OPT_MAGIC);
sp->lcp.magic = 0;
break;
case LCP_OPT_MRU:
/*
* Should not be rejected anyway, since we only
* negotiate a MRU if explicitly requested by
* peer.
*/
sp->lcp.opts &= ~(1 << LCP_OPT_MRU);
break;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case LCP_OPT_AUTH_PROTO:
/*
* Peer doesn't want to authenticate himself,
* deny unless this is a dialout call, and
* AUTHFLAG_NOCALLOUT is set.
*/
if ((sp->pp_flags & PP_CALLIN) == 0 &&
(sp->hisauth.flags & AUTHFLAG_NOCALLOUT) != 0) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[don't insist on auth "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"for callout]");
sp->lcp.opts &= ~(1 << LCP_OPT_AUTH_PROTO);
break;
}
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[access denied]\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
lcp.Close(sp);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
}
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
free (buf, M_TEMP);
return;
}
/*
* Analyze the LCP Configure-NAK option list, and adjust our
* negotiation.
*/
static void
sppp_lcp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len)
{
STDDCL;
u_char *buf, *p;
u_long magic;
len -= 4;
buf = malloc (len, M_TEMP, M_NOWAIT);
if (!buf)
return;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "lcp nak opts: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
for (; len > 1 && p[1]; len -= p[1], p += p[1]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_lcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
case LCP_OPT_MAGIC:
/* Magic number -- renegotiate */
if ((sp->lcp.opts & (1 << LCP_OPT_MAGIC)) &&
len >= 6 && p[1] == 6) {
magic = (u_long)p[2] << 24 |
(u_long)p[3] << 16 | p[4] << 8 | p[5];
/*
* If the remote magic is our negated one,
* this looks like a loopback problem.
* Suggest a new magic to make sure.
*/
if (magic == ~sp->lcp.magic) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "magic glitch ");
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Use random() for seq numbers and read_random for CHAP challenge.
1998-04-06 11:40:17 +00:00
sp->lcp.magic = random();
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
sp->lcp.magic = time.tv_sec + time.tv_usec;
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
} else {
sp->lcp.magic = magic;
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "%lu ", magic);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
}
break;
case LCP_OPT_MRU:
/*
* Peer wants to advise us to negotiate an MRU.
* Agree on it if it's reasonable, or use
* default otherwise.
*/
if (len >= 4 && p[1] == 4) {
u_int mru = p[2] * 256 + p[3];
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "%d ", mru);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (mru < PP_MTU || mru > PP_MAX_MRU)
mru = PP_MTU;
sp->lcp.mru = mru;
sp->lcp.opts |= (1 << LCP_OPT_MRU);
}
break;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case LCP_OPT_AUTH_PROTO:
/*
* Peer doesn't like our authentication method,
* deny.
*/
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[access denied]\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
lcp.Close(sp);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
}
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
free (buf, M_TEMP);
return;
}
static void
sppp_lcp_tlu(struct sppp *sp)
{
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
STDDCL;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int i;
u_long mask;
/* XXX ? */
if (! (ifp->if_flags & IFF_UP) &&
(ifp->if_flags & IFF_RUNNING)) {
/* Coming out of loopback mode. */
if_up(ifp);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf (SPP_FMT "up\n", SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
for (i = 0; i < IDX_COUNT; i++)
if ((cps[i])->flags & CP_QUAL)
(cps[i])->Open(sp);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if ((sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO)) != 0 ||
(sp->pp_flags & PP_NEEDAUTH) != 0)
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->pp_phase = PHASE_AUTHENTICATE;
else
sp->pp_phase = PHASE_NETWORK;
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
if (debug)
log(LOG_DEBUG, SPP_FMT "phase %s\n", SPP_ARGS(ifp),
sppp_phase_name(sp->pp_phase));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/*
* Open all authentication protocols. This is even required
* if we already proceeded to network phase, since it might be
* that remote wants us to authenticate, so we might have to
* send a PAP request. Undesired authentication protocols
* don't do anything when they get an Open event.
*/
for (i = 0; i < IDX_COUNT; i++)
if ((cps[i])->flags & CP_AUTH)
(cps[i])->Open(sp);
if (sp->pp_phase == PHASE_NETWORK) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Notify all NCPs. */
for (i = 0; i < IDX_COUNT; i++)
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
if (((cps[i])->flags & CP_NCP) &&
/*
* XXX
* Hack to administratively disable IPv6 if
* not desired. Perhaps we should have another
* flag for this, but right now, we can make
* all struct cp's read/only.
*/
(cps[i] != &ipv6cp ||
(sp->confflags & CONF_ENABLE_IPV6)))
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cps[i])->Open(sp);
}
/* Send Up events to all started protos. */
for (i = 0, mask = 1; i < IDX_COUNT; i++, mask <<= 1)
Fix a long-standing blatant bug where the operator precedence between & and && has been botched. This was likely the cause for some havoc with various negotiation cases of sppp in the past. Obtained from: NetBSD (rev 1.13) MFC after: 1 week
2001-12-30 17:12:28 +00:00
if ((sp->lcp.protos & mask) && ((cps[i])->flags & CP_LCP) == 0)
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cps[i])->Up(sp);
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/* notify low-level driver of state change */
if (sp->pp_chg)
sp->pp_chg(sp, (int)sp->pp_phase);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->pp_phase == PHASE_NETWORK)
/* if no NCP is starting, close down */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_lcp_check_and_close(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
static void
sppp_lcp_tld(struct sppp *sp)
{
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
STDDCL;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int i;
u_long mask;
sp->pp_phase = PHASE_TERMINATE;
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
if (debug)
log(LOG_DEBUG, SPP_FMT "phase %s\n", SPP_ARGS(ifp),
sppp_phase_name(sp->pp_phase));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* Take upper layers down. We send the Down event first and
* the Close second to prevent the upper layers from sending
* ``a flurry of terminate-request packets'', as the RFC
* describes it.
*/
for (i = 0, mask = 1; i < IDX_COUNT; i++, mask <<= 1)
Fix a long-standing blatant bug where the operator precedence between & and && has been botched. This was likely the cause for some havoc with various negotiation cases of sppp in the past. Obtained from: NetBSD (rev 1.13) MFC after: 1 week
2001-12-30 17:12:28 +00:00
if ((sp->lcp.protos & mask) && ((cps[i])->flags & CP_LCP) == 0) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
(cps[i])->Down(sp);
(cps[i])->Close(sp);
}
}
static void
sppp_lcp_tls(struct sppp *sp)
{
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
STDDCL;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->pp_phase = PHASE_ESTABLISH;
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
if (debug)
log(LOG_DEBUG, SPP_FMT "phase %s\n", SPP_ARGS(ifp),
sppp_phase_name(sp->pp_phase));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Notify lower layer if desired. */
if (sp->pp_tls)
(sp->pp_tls)(sp);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
else
(sp->pp_up)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
static void
sppp_lcp_tlf(struct sppp *sp)
{
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
STDDCL;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sp->pp_phase = PHASE_DEAD;
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
if (debug)
log(LOG_DEBUG, SPP_FMT "phase %s\n", SPP_ARGS(ifp),
sppp_phase_name(sp->pp_phase));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* Notify lower layer if desired. */
if (sp->pp_tlf)
(sp->pp_tlf)(sp);
Straigthen out the use of the tls and tlf callbacks. Not tested on the if_sr, if_cx and if_ar drivers, but expected to work just the same as it used to. Any users of these drivers (or even better: donors of hardware for them) please contact phk@freebsd.org so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
else
(sp->pp_down)(sp);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
static void
sppp_lcp_scr(struct sppp *sp)
{
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
char opt[6 /* magicnum */ + 4 /* mru */ + 5 /* chap */];
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int i = 0;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
u_short authproto;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->lcp.opts & (1 << LCP_OPT_MAGIC)) {
if (! sp->lcp.magic)
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Use random() for seq numbers and read_random for CHAP challenge.
1998-04-06 11:40:17 +00:00
sp->lcp.magic = random();
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
sp->lcp.magic = time.tv_sec + time.tv_usec;
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
opt[i++] = LCP_OPT_MAGIC;
opt[i++] = 6;
opt[i++] = sp->lcp.magic >> 24;
opt[i++] = sp->lcp.magic >> 16;
opt[i++] = sp->lcp.magic >> 8;
opt[i++] = sp->lcp.magic;
}
if (sp->lcp.opts & (1 << LCP_OPT_MRU)) {
opt[i++] = LCP_OPT_MRU;
opt[i++] = 4;
opt[i++] = sp->lcp.mru >> 8;
opt[i++] = sp->lcp.mru;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO)) {
authproto = sp->hisauth.proto;
opt[i++] = LCP_OPT_AUTH_PROTO;
opt[i++] = authproto == PPP_CHAP? 5: 4;
opt[i++] = authproto >> 8;
opt[i++] = authproto;
if (authproto == PPP_CHAP)
opt[i++] = CHAP_MD5;
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->confid[IDX_LCP] = ++sp->pp_seq[IDX_LCP];
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send (sp, PPP_LCP, CONF_REQ, sp->confid[IDX_LCP], i, &opt);
}
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* Check the open NCPs, return true if at least one NCP is open.
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static int
sppp_ncp_check(struct sppp *sp)
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
{
int i, mask;
for (i = 0, mask = 1; i < IDX_COUNT; i++, mask <<= 1)
Fix a long-standing blatant bug where the operator precedence between & and && has been botched. This was likely the cause for some havoc with various negotiation cases of sppp in the past. Obtained from: NetBSD (rev 1.13) MFC after: 1 week
2001-12-30 17:12:28 +00:00
if ((sp->lcp.protos & mask) && (cps[i])->flags & CP_NCP)
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return 1;
return 0;
}
/*
* Re-check the open NCPs and see if we should terminate the link.
* Called by the NCPs during their tlf action handling.
*/
static void
sppp_lcp_check_and_close(struct sppp *sp)
{
if (sp->pp_phase < PHASE_NETWORK)
/* don't bother, we are already going down */
return;
if (sppp_ncp_check(sp))
return;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
lcp.Close(sp);
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*--------------------------------------------------------------------------*
* *
* The IPCP implementation. *
* *
*--------------------------------------------------------------------------*
*/
static void
sppp_ipcp_init(struct sppp *sp)
{
sp->ipcp.opts = 0;
sp->ipcp.flags = 0;
sp->state[IDX_IPCP] = STATE_INITIAL;
sp->fail_counter[IDX_IPCP] = 0;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_seq[IDX_IPCP] = 0;
sp->pp_rseq[IDX_IPCP] = 0;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Update for new callout interface.
1997-09-21 22:02:25 +00:00
callout_handle_init(&sp->ch[IDX_IPCP]);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
static void
sppp_ipcp_up(struct sppp *sp)
{
sppp_up_event(&ipcp, sp);
}
static void
sppp_ipcp_down(struct sppp *sp)
{
sppp_down_event(&ipcp, sp);
}
static void
sppp_ipcp_open(struct sppp *sp)
{
STDDCL;
u_long myaddr, hisaddr;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
sp->ipcp.flags &= ~(IPCP_HISADDR_SEEN | IPCP_MYADDR_SEEN |
IPCP_MYADDR_DYN | IPCP_VJ);
Fix the handling of VJ uncompression. Unfortunately, tcp_uncompress() makes the implied assumption there were another 128 bytes of space in front of the packet handed off to it... which is not the case for sppp. This could easily end up in corrupting random memory. This fix is about the same as revs 1.6, 1.8, and 1.9 from our i4b_ispppsubr.c. Also fixed IPCP option negotiation to zero out the options when starting IPCP. Otherwise, if negotiation parameters change between various IPCP startups, it could happen that old options would still be requested (this happened if VJ was turned off, and ended up in half off the link still negotiating for VJ compression). IMHO, the base system's sppp is now feature-wise up to date with the one in the i4b part of the tree, so the latter can be disabled. MFC after: 1 month
2001-12-30 16:13:35 +00:00
sp->ipcp.opts = 0;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_get_ip_addrs(sp, &myaddr, &hisaddr, 0);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* If we don't have his address, this probably means our
* interface doesn't want to talk IP at all. (This could
* be the case if somebody wants to speak only IPX, for
* example.) Don't open IPCP in this case.
*/
if (hisaddr == 0L) {
/* XXX this message should go away */
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "ipcp_open(): no IP interface\n",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
return;
}
if (myaddr == 0L) {
/*
* I don't have an assigned address, so i need to
* negotiate my address.
*/
sp->ipcp.flags |= IPCP_MYADDR_DYN;
sp->ipcp.opts |= (1 << IPCP_OPT_ADDRESS);
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
} else
sp->ipcp.flags |= IPCP_MYADDR_SEEN;
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
if (sp->confflags & CONF_ENABLE_VJ) {
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
sp->ipcp.opts |= (1 << IPCP_OPT_COMPRESSION);
sp->ipcp.max_state = MAX_STATES - 1;
sp->ipcp.compress_cid = 1;
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_open_event(&ipcp, sp);
}
static void
sppp_ipcp_close(struct sppp *sp)
{
sppp_close_event(&ipcp, sp);
if (sp->ipcp.flags & IPCP_MYADDR_DYN)
/*
* My address was dynamic, clear it again.
*/
sppp_set_ip_addr(sp, 0L);
}
static void
sppp_ipcp_TO(void *cookie)
{
sppp_to_event(&ipcp, (struct sppp *)cookie);
}
/*
* Analyze a configure request. Return true if it was agreeable, and
* caused action sca, false if it has been rejected or nak'ed, and
* caused action scn. (The return value is used to make the state
* transition decision in the state automaton.)
*/
static int
sppp_ipcp_RCR(struct sppp *sp, struct lcp_header *h, int len)
{
u_char *buf, *r, *p;
struct ifnet *ifp = &sp->pp_if;
int rlen, origlen, debug = ifp->if_flags & IFF_DEBUG;
u_long hisaddr, desiredaddr;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
int gotmyaddr = 0;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
int desiredcomp;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
len -= 4;
origlen = len;
/*
* Make sure to allocate a buf that can at least hold a
* conf-nak with an `address' option. We might need it below.
*/
buf = r = malloc ((len < 6? 6: len), M_TEMP, M_NOWAIT);
if (! buf)
return (0);
/* pass 1: see if we can recognize them */
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "ipcp parse opts: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_ipcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
case IPCP_OPT_COMPRESSION:
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
if (!(sp->confflags & CONF_ENABLE_VJ)) {
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
/* VJ compression administratively disabled */
if (debug)
log(-1, "[locally disabled] ");
break;
}
/*
* In theory, we should only conf-rej an
* option that is shorter than RFC 1618
* requires (i.e. < 4), and should conf-nak
* anything else that is not VJ. However,
* since our algorithm always uses the
* original option to NAK it with new values,
* things would become more complicated. In
* pratice, the only commonly implemented IP
* compression option is VJ anyway, so the
* difference is negligible.
*/
if (len >= 6 && p[1] == 6) {
/*
* correctly formed compression option
* that could be VJ compression
*/
continue;
}
if (debug)
log(-1,
"optlen %d [invalid/unsupported] ",
p[1]);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case IPCP_OPT_ADDRESS:
if (len >= 6 && p[1] == 6) {
/* correctly formed address option */
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
continue;
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
}
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[invalid] ");
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
break;
default:
/* Others not supported. */
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[rej] ");
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
break;
}
/* Add the option to rejected list. */
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
bcopy (p, r, p[1]);
r += p[1];
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
rlen += p[1];
If a lcp configure request is received in the lcp opened state and it is acknowledged, it should go to the lcp ack sent state. Don't reply on lcp echo requests when not in the lcp opened state. If the interface is set to CISCO mode, it should still be marked running when ifconfiged. Fixed a few indentations that had gone wrong somewhere. Submitted-by: John.Hay@csir.co.za
1995-11-21 01:23:13 +00:00
}
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (rlen) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " send conf-rej\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send (sp, PPP_IPCP, CONF_REJ, h->ident, rlen, buf);
return 0;
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
} else if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* pass 2: parse option values */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_get_ip_addrs(sp, 0, &hisaddr, 0);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "ipcp parse opt values: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
len = origlen;
for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_ipcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
case IPCP_OPT_COMPRESSION:
desiredcomp = p[2] << 8 | p[3];
/* We only support VJ */
if (desiredcomp == IPCP_COMP_VJ) {
if (debug)
log(-1, "VJ [ack] ");
sp->ipcp.flags |= IPCP_VJ;
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
sl_compress_init(sp->pp_comp, p[4]);
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
sp->ipcp.max_state = p[4];
sp->ipcp.compress_cid = p[5];
continue;
}
if (debug)
log(-1,
"compproto %#04x [not supported] ",
desiredcomp);
p[2] = IPCP_COMP_VJ >> 8;
p[3] = IPCP_COMP_VJ;
p[4] = sp->ipcp.max_state;
p[5] = sp->ipcp.compress_cid;
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case IPCP_OPT_ADDRESS:
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/* This is the address he wants in his end */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
desiredaddr = p[2] << 24 | p[3] << 16 |
p[4] << 8 | p[5];
Make it possible to indicate that we don't care about the remote sides IP address, as long as it isn't 0.0.0.0
1998-02-28 21:01:09 +00:00
if (desiredaddr == hisaddr ||
Extend the hack where 0.0.0.1 meant `any address for remote is acceptable' to addresses 0.0.0.*. This allows for multiple such interfaces. MFC after: 1 month
2001-12-30 16:40:00 +00:00
(hisaddr >= 1 && hisaddr <= 254 && desiredaddr != 0)) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* Peer's address is same as our value,
Extend the hack where 0.0.0.1 meant `any address for remote is acceptable' to addresses 0.0.0.*. This allows for multiple such interfaces. MFC after: 1 month
2001-12-30 16:40:00 +00:00
* or we have set it to 0.0.0.* to
Make it possible to indicate that we don't care about the remote sides IP address, as long as it isn't 0.0.0.0
1998-02-28 21:01:09 +00:00
* indicate that we do not really care,
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* this is agreeable. Gonna conf-ack
* it.
*/
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "%s [ack] ",
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
sppp_dotted_quad(hisaddr));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* record that we've seen it already */
sp->ipcp.flags |= IPCP_HISADDR_SEEN;
continue;
}
/*
* The address wasn't agreeable. This is either
* he sent us 0.0.0.0, asking to assign him an
* address, or he send us another address not
* matching our value. Either case, we gonna
* conf-nak it with our value.
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
* XXX: we should "rej" if hisaddr == 0
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
if (debug) {
if (desiredaddr == 0)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[addr requested] ");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
else
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "%s [not agreed] ",
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
sppp_dotted_quad(desiredaddr));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
Misplaces brace puts important code into debug section. Reviewed by: phk Submitted by: Stefan Bethke <stefan.bethke@hanse.de>
1999-02-23 15:08:44 +00:00
p[2] = hisaddr >> 24;
p[3] = hisaddr >> 16;
p[4] = hisaddr >> 8;
p[5] = hisaddr;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
break;
}
/* Add the option to nak'ed list. */
bcopy (p, r, p[1]);
r += p[1];
rlen += p[1];
}
/*
* If we are about to conf-ack the request, but haven't seen
* his address so far, gonna conf-nak it instead, with the
* `address' option present and our idea of his address being
* filled in there, to request negotiation of both addresses.
*
* XXX This can result in an endless req - nak loop if peer
* doesn't want to send us his address. Q: What should we do
* about it? XXX A: implement the max-failure counter.
*/
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
if (rlen == 0 && !(sp->ipcp.flags & IPCP_HISADDR_SEEN) && !gotmyaddr) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
buf[0] = IPCP_OPT_ADDRESS;
buf[1] = 6;
buf[2] = hisaddr >> 24;
buf[3] = hisaddr >> 16;
buf[4] = hisaddr >> 8;
buf[5] = hisaddr;
rlen = 6;
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "still need hisaddr ");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
if (rlen) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " send conf-nak\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send (sp, PPP_IPCP, CONF_NAK, h->ident, rlen, buf);
} else {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " send conf-ack\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send (sp, PPP_IPCP, CONF_ACK,
h->ident, origlen, h+1);
}
This upgrades the driver for Cronyx-Sigma multiplexor boards from version 1.2 to version 1.9. Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-10-04 22:24:16 +00:00
free (buf, M_TEMP);
return (rlen == 0);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* Analyze the IPCP Configure-Reject option list, and adjust our
* negotiation.
*/
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_ipcp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
u_char *buf, *p;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
struct ifnet *ifp = &sp->pp_if;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
int debug = ifp->if_flags & IFF_DEBUG;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
len -= 4;
buf = malloc (len, M_TEMP, M_NOWAIT);
if (!buf)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
return;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "ipcp rej opts: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
for (; len > 1 && p[1]; len -= p[1], p += p[1]) {
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_ipcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
case IPCP_OPT_COMPRESSION:
sp->ipcp.opts &= ~(1 << IPCP_OPT_COMPRESSION);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case IPCP_OPT_ADDRESS:
/*
* Peer doesn't grok address option. This is
* bad. XXX Should we better give up here?
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
* XXX We could try old "addresses" option...
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
sp->ipcp.opts &= ~(1 << IPCP_OPT_ADDRESS);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
break;
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
free (buf, M_TEMP);
return;
}
/*
* Analyze the IPCP Configure-NAK option list, and adjust our
* negotiation.
*/
static void
sppp_ipcp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len)
{
u_char *buf, *p;
struct ifnet *ifp = &sp->pp_if;
int debug = ifp->if_flags & IFF_DEBUG;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
int desiredcomp;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
u_long wantaddr;
len -= 4;
buf = malloc (len, M_TEMP, M_NOWAIT);
if (!buf)
return;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "ipcp nak opts: ",
SPP_ARGS(ifp));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
p = (void*) (h+1);
for (; len > 1 && p[1]; len -= p[1], p += p[1]) {
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %s ", sppp_ipcp_opt_name(*p));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (*p) {
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
case IPCP_OPT_COMPRESSION:
if (len >= 6 && p[1] == 6) {
desiredcomp = p[2] << 8 | p[3];
if (debug)
log(-1, "[wantcomp %#04x] ",
desiredcomp);
if (desiredcomp == IPCP_COMP_VJ) {
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
sl_compress_init(sp->pp_comp, p[4]);
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
sp->ipcp.max_state = p[4];
sp->ipcp.compress_cid = p[5];
if (debug)
log(-1, "[agree] ");
} else
sp->ipcp.opts &=
~(1 << IPCP_OPT_COMPRESSION);
}
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
case IPCP_OPT_ADDRESS:
/*
* Peer doesn't like our local IP address. See
* if we can do something for him. We'll drop
* him our address then.
*/
if (len >= 6 && p[1] == 6) {
wantaddr = p[2] << 24 | p[3] << 16 |
p[4] << 8 | p[5];
sp->ipcp.opts |= (1 << IPCP_OPT_ADDRESS);
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[wantaddr %s] ",
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_dotted_quad(wantaddr));
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* When doing dynamic address assignment,
* we accept his offer. Otherwise, we
* ignore it and thus continue to negotiate
* our already existing value.
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
* XXX: Bogus, if he said no once, he'll
* just say no again, might as well die.
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
if (sp->ipcp.flags & IPCP_MYADDR_DYN) {
sppp_set_ip_addr(sp, wantaddr);
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "[agree] ");
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
sp->ipcp.flags |= IPCP_MYADDR_SEEN;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
}
break;
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (debug)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
free (buf, M_TEMP);
return;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_ipcp_tlu(struct sppp *sp)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/* we are up - notify isdn daemon */
if (sp->pp_con)
sp->pp_con(sp);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_ipcp_tld(struct sppp *sp)
{
}
static void
sppp_ipcp_tls(struct sppp *sp)
{
/* indicate to LCP that it must stay alive */
sp->lcp.protos |= (1 << IDX_IPCP);
}
static void
sppp_ipcp_tlf(struct sppp *sp)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/* we no longer need LCP */
sp->lcp.protos &= ~(1 << IDX_IPCP);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_lcp_check_and_close(sp);
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static void
sppp_ipcp_scr(struct sppp *sp)
{
char opt[6 /* compression */ + 6 /* address */];
u_long ouraddr;
int i = 0;
Implement VJ header compression for sppp. This is the logical merge of rev 1.32 of i4b's old if_spppsubr.c (which was based on PR misc/11767), plus (i4b) rev 1.6 of i4b's if_ispppsubr.c, albeit with numerous stylistic and cosmetic changes. PR: misc/11767 Submitted by: i4b, Joachim Kuebart MFC after: 1 month
2001-12-27 16:49:31 +00:00
if (sp->ipcp.opts & (1 << IPCP_OPT_COMPRESSION)) {
opt[i++] = IPCP_OPT_COMPRESSION;
opt[i++] = 6;
opt[i++] = IPCP_COMP_VJ >> 8;
opt[i++] = IPCP_COMP_VJ;
opt[i++] = sp->ipcp.max_state;
opt[i++] = sp->ipcp.compress_cid;
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (sp->ipcp.opts & (1 << IPCP_OPT_ADDRESS)) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_get_ip_addrs(sp, &ouraddr, 0, 0);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
opt[i++] = IPCP_OPT_ADDRESS;
opt[i++] = 6;
opt[i++] = ouraddr >> 24;
opt[i++] = ouraddr >> 16;
opt[i++] = ouraddr >> 8;
opt[i++] = ouraddr;
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->confid[IDX_IPCP] = ++sp->pp_seq[IDX_IPCP];
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_send(sp, PPP_IPCP, CONF_REQ, sp->confid[IDX_IPCP], i, &opt);
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/*
*--------------------------------------------------------------------------*
* *
* The IPv6CP implementation. *
* *
*--------------------------------------------------------------------------*
*/
#ifdef INET6
static void
sppp_ipv6cp_init(struct sppp *sp)
{
sp->ipv6cp.opts = 0;
sp->ipv6cp.flags = 0;
sp->state[IDX_IPV6CP] = STATE_INITIAL;
sp->fail_counter[IDX_IPV6CP] = 0;
sp->pp_seq[IDX_IPV6CP] = 0;
sp->pp_rseq[IDX_IPV6CP] = 0;
#if defined(__NetBSD__)
callout_init(&sp->ch[IDX_IPV6CP]);
#endif
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
callout_handle_init(&sp->ch[IDX_IPV6CP]);
#endif
}
static void
sppp_ipv6cp_up(struct sppp *sp)
{
sppp_up_event(&ipv6cp, sp);
}
static void
sppp_ipv6cp_down(struct sppp *sp)
{
sppp_down_event(&ipv6cp, sp);
}
static void
sppp_ipv6cp_open(struct sppp *sp)
{
STDDCL;
struct in6_addr myaddr, hisaddr;
#ifdef IPV6CP_MYIFID_DYN
sp->ipv6cp.flags &= ~(IPV6CP_MYIFID_SEEN|IPV6CP_MYIFID_DYN);
#else
sp->ipv6cp.flags &= ~IPV6CP_MYIFID_SEEN;
#endif
sppp_get_ip6_addrs(sp, &myaddr, &hisaddr, 0);
/*
* If we don't have our address, this probably means our
* interface doesn't want to talk IPv6 at all. (This could
* be the case if somebody wants to speak only IPX, for
* example.) Don't open IPv6CP in this case.
*/
if (IN6_IS_ADDR_UNSPECIFIED(&myaddr)) {
/* XXX this message should go away */
if (debug)
log(LOG_DEBUG, SPP_FMT "ipv6cp_open(): no IPv6 interface\n",
SPP_ARGS(ifp));
return;
}
sp->ipv6cp.flags |= IPV6CP_MYIFID_SEEN;
sp->ipv6cp.opts |= (1 << IPV6CP_OPT_IFID);
sppp_open_event(&ipv6cp, sp);
}
static void
sppp_ipv6cp_close(struct sppp *sp)
{
sppp_close_event(&ipv6cp, sp);
}
static void
sppp_ipv6cp_TO(void *cookie)
{
sppp_to_event(&ipv6cp, (struct sppp *)cookie);
}
/*
* Analyze a configure request. Return true if it was agreeable, and
* caused action sca, false if it has been rejected or nak'ed, and
* caused action scn. (The return value is used to make the state
* transition decision in the state automaton.)
*/
static int
sppp_ipv6cp_RCR(struct sppp *sp, struct lcp_header *h, int len)
{
u_char *buf, *r, *p;
struct ifnet *ifp = &sp->pp_if;
int rlen, origlen, debug = ifp->if_flags & IFF_DEBUG;
struct in6_addr myaddr, desiredaddr, suggestaddr;
int ifidcount;
int type;
int collision, nohisaddr;
len -= 4;
origlen = len;
/*
* Make sure to allocate a buf that can at least hold a
* conf-nak with an `address' option. We might need it below.
*/
buf = r = malloc ((len < 6? 6: len), M_TEMP, M_NOWAIT);
if (! buf)
return (0);
/* pass 1: see if we can recognize them */
if (debug)
log(LOG_DEBUG, SPP_FMT "ipv6cp parse opts:",
SPP_ARGS(ifp));
p = (void*) (h+1);
ifidcount = 0;
for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " %s", sppp_ipv6cp_opt_name(*p));
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
switch (*p) {
case IPV6CP_OPT_IFID:
if (len >= 10 && p[1] == 10 && ifidcount == 0) {
/* correctly formed address option */
ifidcount++;
continue;
}
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " [invalid]");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
break;
#ifdef notyet
case IPV6CP_OPT_COMPRESSION:
if (len >= 4 && p[1] >= 4) {
/* correctly formed compress option */
continue;
}
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " [invalid]");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
break;
#endif
default:
/* Others not supported. */
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " [rej]");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
break;
}
/* Add the option to rejected list. */
bcopy (p, r, p[1]);
r += p[1];
rlen += p[1];
}
if (rlen) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " send conf-rej\n");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_send (sp, PPP_IPV6CP, CONF_REJ, h->ident, rlen, buf);
goto end;
} else if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, "\n");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/* pass 2: parse option values */
sppp_get_ip6_addrs(sp, &myaddr, 0, 0);
if (debug)
log(LOG_DEBUG, SPP_FMT "ipv6cp parse opt values: ",
SPP_ARGS(ifp));
p = (void*) (h+1);
len = origlen;
type = CONF_ACK;
for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " %s", sppp_ipv6cp_opt_name(*p));
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
switch (*p) {
#ifdef notyet
case IPV6CP_OPT_COMPRESSION:
continue;
#endif
case IPV6CP_OPT_IFID:
bzero(&desiredaddr, sizeof(desiredaddr));
bcopy(&p[2], &desiredaddr.s6_addr[8], 8);
collision = (bcmp(&desiredaddr.s6_addr[8],
&myaddr.s6_addr[8], 8) == 0);
nohisaddr = IN6_IS_ADDR_UNSPECIFIED(&desiredaddr);
desiredaddr.s6_addr16[0] = htons(0xfe80);
desiredaddr.s6_addr16[1] = htons(sp->pp_if.if_index);
if (!collision && !nohisaddr) {
/* no collision, hisaddr known - Conf-Ack */
type = CONF_ACK;
if (debug) {
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " %s [%s]",
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
ip6_sprintf(&desiredaddr),
sppp_cp_type_name(type));
}
continue;
}
bzero(&suggestaddr, sizeof(&suggestaddr));
if (collision && nohisaddr) {
/* collision, hisaddr unknown - Conf-Rej */
type = CONF_REJ;
bzero(&p[2], 8);
} else {
/*
* - no collision, hisaddr unknown, or
* - collision, hisaddr known
* Conf-Nak, suggest hisaddr
*/
type = CONF_NAK;
sppp_suggest_ip6_addr(sp, &suggestaddr);
bcopy(&suggestaddr.s6_addr[8], &p[2], 8);
}
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " %s [%s]", ip6_sprintf(&desiredaddr),
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_type_name(type));
break;
}
/* Add the option to nak'ed list. */
bcopy (p, r, p[1]);
r += p[1];
rlen += p[1];
}
if (rlen == 0 && type == CONF_ACK) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " send %s\n", sppp_cp_type_name(type));
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_send (sp, PPP_IPV6CP, type, h->ident, origlen, h+1);
} else {
#ifdef DIAGNOSTIC
if (type == CONF_ACK)
panic("IPv6CP RCR: CONF_ACK with non-zero rlen");
#endif
if (debug) {
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " send %s suggest %s\n",
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cp_type_name(type), ip6_sprintf(&suggestaddr));
}
sppp_cp_send (sp, PPP_IPV6CP, type, h->ident, rlen, buf);
}
end:
free (buf, M_TEMP);
return (rlen == 0);
}
/*
* Analyze the IPv6CP Configure-Reject option list, and adjust our
* negotiation.
*/
static void
sppp_ipv6cp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len)
{
u_char *buf, *p;
struct ifnet *ifp = &sp->pp_if;
int debug = ifp->if_flags & IFF_DEBUG;
len -= 4;
buf = malloc (len, M_TEMP, M_NOWAIT);
if (!buf)
return;
if (debug)
log(LOG_DEBUG, SPP_FMT "ipv6cp rej opts:",
SPP_ARGS(ifp));
p = (void*) (h+1);
for (; len > 1 && p[1]; len -= p[1], p += p[1]) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " %s", sppp_ipv6cp_opt_name(*p));
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
switch (*p) {
case IPV6CP_OPT_IFID:
/*
* Peer doesn't grok address option. This is
* bad. XXX Should we better give up here?
*/
sp->ipv6cp.opts &= ~(1 << IPV6CP_OPT_IFID);
break;
#ifdef notyet
case IPV6CP_OPT_COMPRESS:
sp->ipv6cp.opts &= ~(1 << IPV6CP_OPT_COMPRESS);
break;
#endif
}
}
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, "\n");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
free (buf, M_TEMP);
return;
}
/*
* Analyze the IPv6CP Configure-NAK option list, and adjust our
* negotiation.
*/
static void
sppp_ipv6cp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len)
{
u_char *buf, *p;
struct ifnet *ifp = &sp->pp_if;
int debug = ifp->if_flags & IFF_DEBUG;
struct in6_addr suggestaddr;
len -= 4;
buf = malloc (len, M_TEMP, M_NOWAIT);
if (!buf)
return;
if (debug)
log(LOG_DEBUG, SPP_FMT "ipv6cp nak opts:",
SPP_ARGS(ifp));
p = (void*) (h+1);
for (; len > 1 && p[1]; len -= p[1], p += p[1]) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " %s", sppp_ipv6cp_opt_name(*p));
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
switch (*p) {
case IPV6CP_OPT_IFID:
/*
* Peer doesn't like our local ifid. See
* if we can do something for him. We'll drop
* him our address then.
*/
if (len < 10 || p[1] != 10)
break;
bzero(&suggestaddr, sizeof(suggestaddr));
suggestaddr.s6_addr16[0] = htons(0xfe80);
suggestaddr.s6_addr16[1] = htons(sp->pp_if.if_index);
bcopy(&p[2], &suggestaddr.s6_addr[8], 8);
sp->ipv6cp.opts |= (1 << IPV6CP_OPT_IFID);
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " [suggestaddr %s]",
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
ip6_sprintf(&suggestaddr));
#ifdef IPV6CP_MYIFID_DYN
/*
* When doing dynamic address assignment,
* we accept his offer.
*/
if (sp->ipv6cp.flags & IPV6CP_MYIFID_DYN) {
struct in6_addr lastsuggest;
/*
* If <suggested myaddr from peer> equals to
* <hisaddr we have suggested last time>,
* we have a collision. generate new random
* ifid.
*/
sppp_suggest_ip6_addr(&lastsuggest);
if (IN6_ARE_ADDR_EQUAL(&suggestaddr,
lastsuggest)) {
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " [random]");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_gen_ip6_addr(sp, &suggestaddr);
}
sppp_set_ip6_addr(sp, &suggestaddr, 0);
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, " [agree]");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->ipv6cp.flags |= IPV6CP_MYIFID_SEEN;
}
#else
/*
* Since we do not do dynamic address assignment,
* we ignore it and thus continue to negotiate
* our already existing value. This can possibly
* go into infinite request-reject loop.
*
* This is not likely because we normally use
* ifid based on MAC-address.
* If you have no ethernet card on the node, too bad.
* XXX should we use fail_counter?
*/
#endif
break;
#ifdef notyet
case IPV6CP_OPT_COMPRESS:
/*
* Peer wants different compression parameters.
*/
break;
#endif
}
}
if (debug)
Make compilable. addlog(...) was replaced with log(-1, ...) Reported by: peter
2001-06-13 17:30:55 +00:00
log(-1, "\n");
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
free (buf, M_TEMP);
return;
}
static void
sppp_ipv6cp_tlu(struct sppp *sp)
{
/* we are up - notify isdn daemon */
if (sp->pp_con)
sp->pp_con(sp);
}
static void
sppp_ipv6cp_tld(struct sppp *sp)
{
}
static void
sppp_ipv6cp_tls(struct sppp *sp)
{
/* indicate to LCP that it must stay alive */
sp->lcp.protos |= (1 << IDX_IPV6CP);
}
static void
sppp_ipv6cp_tlf(struct sppp *sp)
{
#if 0 /* need #if 0 to close IPv6CP properly */
/* we no longer need LCP */
sp->lcp.protos &= ~(1 << IDX_IPV6CP);
sppp_lcp_check_and_close(sp);
#endif
}
static void
sppp_ipv6cp_scr(struct sppp *sp)
{
char opt[10 /* ifid */ + 4 /* compression, minimum */];
struct in6_addr ouraddr;
int i = 0;
if (sp->ipv6cp.opts & (1 << IPV6CP_OPT_IFID)) {
sppp_get_ip6_addrs(sp, &ouraddr, 0, 0);
opt[i++] = IPV6CP_OPT_IFID;
opt[i++] = 10;
bcopy(&ouraddr.s6_addr[8], &opt[i], 8);
i += 8;
}
#ifdef notyet
if (sp->ipv6cp.opts & (1 << IPV6CP_OPT_COMPRESSION)) {
opt[i++] = IPV6CP_OPT_COMPRESSION;
opt[i++] = 4;
opt[i++] = 0; /* TBD */
opt[i++] = 0; /* TBD */
/* variable length data may follow */
}
#endif
sp->confid[IDX_IPV6CP] = ++sp->pp_seq[IDX_IPV6CP];
sppp_cp_send(sp, PPP_IPV6CP, CONF_REQ, sp->confid[IDX_IPV6CP], i, &opt);
}
#else /*INET6*/
static void sppp_ipv6cp_init(struct sppp *sp)
{
}
static void sppp_ipv6cp_up(struct sppp *sp)
{
}
static void sppp_ipv6cp_down(struct sppp *sp)
{
}
static void sppp_ipv6cp_open(struct sppp *sp)
{
}
static void sppp_ipv6cp_close(struct sppp *sp)
{
}
static void sppp_ipv6cp_TO(void *sp)
{
}
static int sppp_ipv6cp_RCR(struct sppp *sp, struct lcp_header *h, int len)
{
return 0;
}
static void sppp_ipv6cp_RCN_rej(struct sppp *sp, struct lcp_header *h, int len)
{
}
static void sppp_ipv6cp_RCN_nak(struct sppp *sp, struct lcp_header *h, int len)
{
}
static void sppp_ipv6cp_tlu(struct sppp *sp)
{
}
static void sppp_ipv6cp_tld(struct sppp *sp)
{
}
static void sppp_ipv6cp_tls(struct sppp *sp)
{
}
static void sppp_ipv6cp_tlf(struct sppp *sp)
{
}
static void sppp_ipv6cp_scr(struct sppp *sp)
{
}
#endif /*INET6*/
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
*--------------------------------------------------------------------------*
* *
* The CHAP implementation. *
* *
*--------------------------------------------------------------------------*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* The authentication protocols don't employ a full-fledged state machine as
* the control protocols do, since they do have Open and Close events, but
* not Up and Down, nor are they explicitly terminated. Also, use of the
* authentication protocols may be different in both directions (this makes
* sense, think of a machine that never accepts incoming calls but only
* calls out, it doesn't require the called party to authenticate itself).
*
* Our state machine for the local authentication protocol (we are requesting
* the peer to authenticate) looks like:
*
* RCA-
* +--------------------------------------------+
* V scn,tld|
* +--------+ Close +---------+ RCA+
* | |<----------------------------------| |------+
* +--->| Closed | TO* | Opened | sca |
* | | |-----+ +-------| |<-----+
* | +--------+ irc | | +---------+
* | ^ | | ^
* | | | | |
* | | | | |
* | TO-| | | |
* | |tld TO+ V | |
* | | +------->+ | |
* | | | | | |
* | +--------+ V | |
* | | |<----+<--------------------+ |
* | | Req- | scr |
* | | Sent | |
* | | | |
* | +--------+ |
* | RCA- | | RCA+ |
* +------+ +------------------------------------------+
* scn,tld sca,irc,ict,tlu
*
*
* with:
*
* Open: LCP reached authentication phase
* Close: LCP reached terminate phase
*
* RCA+: received reply (pap-req, chap-response), acceptable
* RCN: received reply (pap-req, chap-response), not acceptable
* TO+: timeout with restart counter >= 0
* TO-: timeout with restart counter < 0
* TO*: reschedule timeout for CHAP
*
* scr: send request packet (none for PAP, chap-challenge)
* sca: send ack packet (pap-ack, chap-success)
* scn: send nak packet (pap-nak, chap-failure)
* ict: initialize re-challenge timer (CHAP only)
*
* tlu: this-layer-up, LCP reaches network phase
* tld: this-layer-down, LCP enters terminate phase
*
* Note that in CHAP mode, after sending a new challenge, while the state
* automaton falls back into Req-Sent state, it doesn't signal a tld
* event to LCP, so LCP remains in network phase. Only after not getting
* any response (or after getting an unacceptable response), CHAP closes,
* causing LCP to enter terminate phase.
*
* With PAP, there is no initial request that can be sent. The peer is
* expected to send one based on the successful negotiation of PAP as
* the authentication protocol during the LCP option negotiation.
*
* Incoming authentication protocol requests (remote requests
* authentication, we are peer) don't employ a state machine at all,
* they are simply answered. Some peers [Ascend P50 firmware rev
* 4.50] react allergically when sending IPCP requests while they are
* still in authentication phase (thereby violating the standard that
* demands that these NCP packets are to be discarded), so we keep
* track of the peer demanding us to authenticate, and only proceed to
* phase network once we've seen a positive acknowledge for the
* authentication.
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
*/
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* Handle incoming CHAP packets.
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
*/
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
void
sppp_chap_input(struct sppp *sp, struct mbuf *m)
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
{
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
STDDCL;
struct lcp_header *h;
int len, x;
u_char *value, *name, digest[AUTHKEYLEN], dsize;
int value_len, name_len;
MD5_CTX ctx;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
len = m->m_pkthdr.len;
if (len < 4) {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap invalid packet length: %d bytes\n",
SPP_ARGS(ifp), len);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return;
}
h = mtod (m, struct lcp_header*);
if (len > ntohs (h->len))
len = ntohs (h->len);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
switch (h->type) {
/* challenge, failure and success are his authproto */
case CHAP_CHALLENGE:
value = 1 + (u_char*)(h+1);
value_len = value[-1];
name = value + value_len;
name_len = len - value_len - 5;
if (name_len < 0) {
if (debug) {
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap corrupted challenge "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<%s id=0x%x len=%d",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_auth_type_name(PPP_CHAP, h->type),
h->ident, ntohs(h->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes((u_char*) (h+1), len-4);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
break;
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (debug) {
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap input <%s id=0x%x len=%d name=",
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_auth_type_name(PPP_CHAP, h->type), h->ident,
ntohs(h->len));
sppp_print_string((char*) name, name_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " value-size=%d value=", value_len);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_bytes(value, value_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* Compute reply value. */
MD5Init(&ctx);
MD5Update(&ctx, &h->ident, 1);
MD5Update(&ctx, sp->myauth.secret,
sppp_strnlen(sp->myauth.secret, AUTHKEYLEN));
MD5Update(&ctx, value, value_len);
MD5Final(digest, &ctx);
dsize = sizeof digest;
sppp_auth_send(&chap, sp, CHAP_RESPONSE, h->ident,
sizeof dsize, (const char *)&dsize,
sizeof digest, digest,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
(size_t)sppp_strnlen(sp->myauth.name, AUTHNAMELEN),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->myauth.name,
0);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case CHAP_SUCCESS:
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "chap success",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (len > 4) {
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ": ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string((char*)(h + 1), len - 4);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
x = splimp();
sp->pp_flags &= ~PP_NEEDAUTH;
if (sp->myauth.proto == PPP_CHAP &&
Reviewed by: Joerg Wunsch In sppp_chap_input: 1) in the CHAP_CHALLENGE case don't output the peer's name if it is not what we expected (DEBUG) since it will be printed out in the course of events anyway. 2) in the CHAP_SUCCESS case test whether the peer is required to authenticate himself [(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO))], otherwise the state machine may never switch into the network state. I saw this case against 2 different ISPs; they never bothered to authenticate themselves to me. In sppp_pap_input: in the PAP_ACK case do the same as in 2) above for the same reason.
1998-01-01 21:27:18 +00:00
(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO)) &&
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
(sp->lcp.protos & (1 << IDX_CHAP)) == 0) {
/*
* We are authenticator for CHAP but didn't
* complete yet. Leave it to tlu to proceed
* to network phase.
*/
splx(x);
break;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
splx(x);
sppp_phase_network(sp);
break;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case CHAP_FAILURE:
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_INFO, SPP_FMT "chap failure",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (len > 4) {
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ": ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string((char*)(h + 1), len - 4);
}
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
} else
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_INFO, SPP_FMT "chap failure\n",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* await LCP shutdown by authenticator */
break;
/* response is my authproto */
case CHAP_RESPONSE:
value = 1 + (u_char*)(h+1);
value_len = value[-1];
name = value + value_len;
name_len = len - value_len - 5;
if (name_len < 0) {
if (debug) {
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap corrupted response "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<%s id=0x%x len=%d",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_auth_type_name(PPP_CHAP, h->type),
h->ident, ntohs(h->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes((u_char*)(h+1), len-4);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
break;
}
if (h->ident != sp->confid[IDX_CHAP]) {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap dropping response for old ID "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"(got %d, expected %d)\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
h->ident, sp->confid[IDX_CHAP]);
break;
}
if (name_len != sppp_strnlen(sp->hisauth.name, AUTHNAMELEN)
|| bcmp(name, sp->hisauth.name, name_len) != 0) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_INFO, SPP_FMT "chap response, his name ",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string(name, name_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " != expected ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string(sp->hisauth.name,
sppp_strnlen(sp->hisauth.name, AUTHNAMELEN));
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "chap input(%s) "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<%s id=0x%x len=%d name=",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_state_name(sp->state[IDX_CHAP]),
sppp_auth_type_name(PPP_CHAP, h->type),
h->ident, ntohs (h->len));
sppp_print_string((char*)name, name_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " value-size=%d value=", value_len);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_bytes(value, value_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
if (value_len != AUTHKEYLEN) {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap bad hash value length: "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"%d bytes, should be %d\n",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp), value_len,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
AUTHKEYLEN);
break;
}
MD5Init(&ctx);
MD5Update(&ctx, &h->ident, 1);
MD5Update(&ctx, sp->hisauth.secret,
sppp_strnlen(sp->hisauth.secret, AUTHKEYLEN));
MD5Update(&ctx, sp->myauth.challenge, AUTHKEYLEN);
MD5Final(digest, &ctx);
#define FAILMSG "Failed..."
#define SUCCMSG "Welcome!"
if (value_len != sizeof digest ||
bcmp(digest, value, value_len) != 0) {
/* action scn, tld */
sppp_auth_send(&chap, sp, CHAP_FAILURE, h->ident,
sizeof(FAILMSG) - 1, (u_char *)FAILMSG,
0);
chap.tld(sp);
break;
}
/* action sca, perhaps tlu */
if (sp->state[IDX_CHAP] == STATE_REQ_SENT ||
sp->state[IDX_CHAP] == STATE_OPENED)
sppp_auth_send(&chap, sp, CHAP_SUCCESS, h->ident,
sizeof(SUCCMSG) - 1, (u_char *)SUCCMSG,
0);
if (sp->state[IDX_CHAP] == STATE_REQ_SENT) {
sppp_cp_change_state(&chap, sp, STATE_OPENED);
chap.tlu(sp);
}
break;
default:
/* Unknown CHAP packet type -- ignore. */
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "chap unknown input(%s) "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<0x%x id=0x%xh len=%d",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_state_name(sp->state[IDX_CHAP]),
h->type, h->ident, ntohs(h->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes((u_char*)(h+1), len-4);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
break;
}
}
static void
sppp_chap_init(struct sppp *sp)
{
/* Chap doesn't have STATE_INITIAL at all. */
sp->state[IDX_CHAP] = STATE_CLOSED;
sp->fail_counter[IDX_CHAP] = 0;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_seq[IDX_CHAP] = 0;
sp->pp_rseq[IDX_CHAP] = 0;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
callout_handle_init(&sp->ch[IDX_CHAP]);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
static void
sppp_chap_open(struct sppp *sp)
{
if (sp->myauth.proto == PPP_CHAP &&
(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO)) != 0) {
/* we are authenticator for CHAP, start it */
chap.scr(sp);
sp->rst_counter[IDX_CHAP] = sp->lcp.max_configure;
sppp_cp_change_state(&chap, sp, STATE_REQ_SENT);
}
/* nothing to be done if we are peer, await a challenge */
}
static void
sppp_chap_close(struct sppp *sp)
{
if (sp->state[IDX_CHAP] != STATE_CLOSED)
sppp_cp_change_state(&chap, sp, STATE_CLOSED);
}
static void
sppp_chap_TO(void *cookie)
{
struct sppp *sp = (struct sppp *)cookie;
STDDCL;
int s;
s = splimp();
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "chap TO(%s) rst_counter = %d\n",
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_state_name(sp->state[IDX_CHAP]),
sp->rst_counter[IDX_CHAP]);
if (--sp->rst_counter[IDX_CHAP] < 0)
/* TO- event */
switch (sp->state[IDX_CHAP]) {
case STATE_REQ_SENT:
chap.tld(sp);
sppp_cp_change_state(&chap, sp, STATE_CLOSED);
break;
}
else
/* TO+ (or TO*) event */
switch (sp->state[IDX_CHAP]) {
case STATE_OPENED:
/* TO* event */
sp->rst_counter[IDX_CHAP] = sp->lcp.max_configure;
Replace various spelling with FALLTHROUGH which is lint()able
2002-08-25 13:23:09 +00:00
/* FALLTHROUGH */
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case STATE_REQ_SENT:
chap.scr(sp);
/* sppp_cp_change_state() will restart the timer */
sppp_cp_change_state(&chap, sp, STATE_REQ_SENT);
break;
}
splx(s);
}
static void
sppp_chap_tlu(struct sppp *sp)
{
STDDCL;
int i, x;
Minor cleanup: kill a couple of unused variables, and a couple of uninitialized variables. Obtained from: The isdn4bsd project (partially)
1998-10-06 21:12:45 +00:00
i = 0;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->rst_counter[IDX_CHAP] = sp->lcp.max_configure;
/*
* Some broken CHAP implementations (Conware CoNet, firmware
* 4.0.?) don't want to re-authenticate their CHAP once the
* initial challenge-response exchange has taken place.
* Provide for an option to avoid rechallenges.
*/
if ((sp->hisauth.flags & AUTHFLAG_NORECHALLENGE) == 0) {
/*
* Compute the re-challenge timeout. This will yield
* a number between 300 and 810 seconds.
*/
i = 300 + ((unsigned)(random() & 0xff00) >> 7);
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
TIMEOUT(chap.TO, (void *)sp, i * hz, sp->ch[IDX_CHAP]);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
if (debug) {
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "chap %s, ",
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->pp_phase == PHASE_NETWORK? "reconfirmed": "tlu");
if ((sp->hisauth.flags & AUTHFLAG_NORECHALLENGE) == 0)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "next re-challenge in %d seconds\n", i);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
else
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "re-challenging supressed\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
x = splimp();
/* indicate to LCP that we need to be closed down */
sp->lcp.protos |= (1 << IDX_CHAP);
if (sp->pp_flags & PP_NEEDAUTH) {
/*
* Remote is authenticator, but his auth proto didn't
* complete yet. Defer the transition to network
* phase.
*/
splx(x);
return;
}
splx(x);
/*
* If we are already in phase network, we are done here. This
* is the case if this is a dummy tlu event after a re-challenge.
*/
if (sp->pp_phase != PHASE_NETWORK)
sppp_phase_network(sp);
}
static void
sppp_chap_tld(struct sppp *sp)
{
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "chap tld\n", SPP_ARGS(ifp));
UNTIMEOUT(chap.TO, (void *)sp, sp->ch[IDX_CHAP]);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->lcp.protos &= ~(1 << IDX_CHAP);
lcp.Close(sp);
}
static void
sppp_chap_scr(struct sppp *sp)
{
u_long *ch, seed;
u_char clen;
/* Compute random challenge. */
ch = (u_long *)sp->myauth.challenge;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Use random() for seq numbers and read_random for CHAP challenge.
1998-04-06 11:40:17 +00:00
read_random(&seed, sizeof seed);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#else
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
{
struct timeval tv;
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
microtime(&tv);
seed = tv.tv_sec ^ tv.tv_usec;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
}
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
ch[0] = seed ^ random();
ch[1] = seed ^ random();
ch[2] = seed ^ random();
ch[3] = seed ^ random();
clen = AUTHKEYLEN;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->confid[IDX_CHAP] = ++sp->pp_seq[IDX_CHAP];
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_auth_send(&chap, sp, CHAP_CHALLENGE, sp->confid[IDX_CHAP],
sizeof clen, (const char *)&clen,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
(size_t)AUTHKEYLEN, sp->myauth.challenge,
(size_t)sppp_strnlen(sp->myauth.name, AUTHNAMELEN),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->myauth.name,
0);
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
*--------------------------------------------------------------------------*
* *
* The PAP implementation. *
* *
*--------------------------------------------------------------------------*
*/
/*
* For PAP, we need to keep a little state also if we are the peer, not the
* authenticator. This is since we don't get a request to authenticate, but
* have to repeatedly authenticate ourself until we got a response (or the
* retry counter is expired).
*/
/*
* Handle incoming PAP packets. */
static void
sppp_pap_input(struct sppp *sp, struct mbuf *m)
{
STDDCL;
struct lcp_header *h;
int len, x;
u_char *name, *passwd, mlen;
int name_len, passwd_len;
len = m->m_pkthdr.len;
if (len < 5) {
if (debug)
log(LOG_DEBUG,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_FMT "pap invalid packet length: %d bytes\n",
SPP_ARGS(ifp), len);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return;
}
h = mtod (m, struct lcp_header*);
if (len > ntohs (h->len))
len = ntohs (h->len);
switch (h->type) {
/* PAP request is my authproto */
case PAP_REQ:
name = 1 + (u_char*)(h+1);
name_len = name[-1];
passwd = name + name_len + 1;
if (name_len > len - 6 ||
(passwd_len = passwd[-1]) > len - 6 - name_len) {
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap corrupted input "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<%s id=0x%x len=%d",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_auth_type_name(PPP_PAP, h->type),
h->ident, ntohs(h->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes((u_char*)(h+1), len-4);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
break;
}
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap input(%s) "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<%s id=0x%x len=%d name=",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_state_name(sp->state[IDX_PAP]),
sppp_auth_type_name(PPP_PAP, h->type),
h->ident, ntohs(h->len));
sppp_print_string((char*)name, name_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " passwd=");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string((char*)passwd, passwd_len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
This is another MFC candidate. Fix a serious bug in sppp where anyone could obtain a successful PAP authentication by supplying a null password. I've only stumpled across the PR while browsing for all sppp-related PRs. Should we also file a security advisory for this? PR: 21592 Submitted by: <dli@3bc.de> Dirk Liebke
2001-03-25 09:53:07 +00:00
if (name_len != sppp_strnlen(sp->hisauth.name, AUTHNAMELEN) ||
passwd_len != sppp_strnlen(sp->hisauth.secret, AUTHKEYLEN) ||
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
bcmp(name, sp->hisauth.name, name_len) != 0 ||
bcmp(passwd, sp->hisauth.secret, passwd_len) != 0) {
/* action scn, tld */
mlen = sizeof(FAILMSG) - 1;
sppp_auth_send(&pap, sp, PAP_NAK, h->ident,
sizeof mlen, (const char *)&mlen,
sizeof(FAILMSG) - 1, (u_char *)FAILMSG,
0);
pap.tld(sp);
break;
}
/* action sca, perhaps tlu */
if (sp->state[IDX_PAP] == STATE_REQ_SENT ||
sp->state[IDX_PAP] == STATE_OPENED) {
mlen = sizeof(SUCCMSG) - 1;
sppp_auth_send(&pap, sp, PAP_ACK, h->ident,
sizeof mlen, (const char *)&mlen,
sizeof(SUCCMSG) - 1, (u_char *)SUCCMSG,
0);
}
if (sp->state[IDX_PAP] == STATE_REQ_SENT) {
sppp_cp_change_state(&pap, sp, STATE_OPENED);
pap.tlu(sp);
}
break;
/* ack and nak are his authproto */
case PAP_ACK:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
UNTIMEOUT(sppp_pap_my_TO, (void *)sp, sp->pap_my_to_ch);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap success",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
name_len = *((char *)h);
if (len > 5 && name_len) {
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ": ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string((char*)(h+1), name_len);
}
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
x = splimp();
sp->pp_flags &= ~PP_NEEDAUTH;
if (sp->myauth.proto == PPP_PAP &&
Reviewed by: Joerg Wunsch In sppp_chap_input: 1) in the CHAP_CHALLENGE case don't output the peer's name if it is not what we expected (DEBUG) since it will be printed out in the course of events anyway. 2) in the CHAP_SUCCESS case test whether the peer is required to authenticate himself [(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO))], otherwise the state machine may never switch into the network state. I saw this case against 2 different ISPs; they never bothered to authenticate themselves to me. In sppp_pap_input: in the PAP_ACK case do the same as in 2) above for the same reason.
1998-01-01 21:27:18 +00:00
(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO)) &&
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
(sp->lcp.protos & (1 << IDX_PAP)) == 0) {
/*
* We are authenticator for PAP but didn't
* complete yet. Leave it to tlu to proceed
* to network phase.
*/
splx(x);
break;
}
splx(x);
sppp_phase_network(sp);
break;
case PAP_NAK:
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
UNTIMEOUT(sppp_pap_my_TO, (void *)sp, sp->pap_my_to_ch);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_INFO, SPP_FMT "pap failure",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
name_len = *((char *)h);
if (len > 5 && name_len) {
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ": ");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_string((char*)(h+1), name_len);
}
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
} else
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_INFO, SPP_FMT "pap failure\n",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* await LCP shutdown by authenticator */
break;
default:
/* Unknown PAP packet type -- ignore. */
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap corrupted input "
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"<0x%x id=0x%x len=%d",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
h->type, h->ident, ntohs(h->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes((u_char*)(h+1), len-4);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
break;
}
}
static void
sppp_pap_init(struct sppp *sp)
{
/* PAP doesn't have STATE_INITIAL at all. */
sp->state[IDX_PAP] = STATE_CLOSED;
sp->fail_counter[IDX_PAP] = 0;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->pp_seq[IDX_PAP] = 0;
sp->pp_rseq[IDX_PAP] = 0;
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
callout_handle_init(&sp->ch[IDX_PAP]);
callout_handle_init(&sp->pap_my_to_ch);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
static void
sppp_pap_open(struct sppp *sp)
{
if (sp->hisauth.proto == PPP_PAP &&
(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO)) != 0) {
/* we are authenticator for PAP, start our timer */
sp->rst_counter[IDX_PAP] = sp->lcp.max_configure;
sppp_cp_change_state(&pap, sp, STATE_REQ_SENT);
}
if (sp->myauth.proto == PPP_PAP) {
/* we are peer, send a request, and start a timer */
pap.scr(sp);
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
TIMEOUT(sppp_pap_my_TO, (void *)sp, sp->lcp.timeout,
sp->pap_my_to_ch);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
}
static void
sppp_pap_close(struct sppp *sp)
{
if (sp->state[IDX_PAP] != STATE_CLOSED)
sppp_cp_change_state(&pap, sp, STATE_CLOSED);
}
/*
* That's the timeout routine if we are authenticator. Since the
* authenticator is basically passive in PAP, we can't do much here.
*/
static void
sppp_pap_TO(void *cookie)
{
struct sppp *sp = (struct sppp *)cookie;
STDDCL;
int s;
s = splimp();
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap TO(%s) rst_counter = %d\n",
SPP_ARGS(ifp),
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_state_name(sp->state[IDX_PAP]),
sp->rst_counter[IDX_PAP]);
if (--sp->rst_counter[IDX_PAP] < 0)
/* TO- event */
switch (sp->state[IDX_PAP]) {
case STATE_REQ_SENT:
pap.tld(sp);
sppp_cp_change_state(&pap, sp, STATE_CLOSED);
break;
}
else
/* TO+ event, not very much we could do */
switch (sp->state[IDX_PAP]) {
case STATE_REQ_SENT:
/* sppp_cp_change_state() will restart the timer */
sppp_cp_change_state(&pap, sp, STATE_REQ_SENT);
break;
}
splx(s);
}
/*
* That's the timeout handler if we are peer. Since the peer is active,
* we need to retransmit our PAP request since it is apparently lost.
* XXX We should impose a max counter.
*/
static void
sppp_pap_my_TO(void *cookie)
{
struct sppp *sp = (struct sppp *)cookie;
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap peer TO\n",
SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
pap.scr(sp);
}
static void
sppp_pap_tlu(struct sppp *sp)
{
STDDCL;
int x;
sp->rst_counter[IDX_PAP] = sp->lcp.max_configure;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s tlu\n",
SPP_ARGS(ifp), pap.name);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
x = splimp();
/* indicate to LCP that we need to be closed down */
sp->lcp.protos |= (1 << IDX_PAP);
if (sp->pp_flags & PP_NEEDAUTH) {
/*
* Remote is authenticator, but his auth proto didn't
* complete yet. Defer the transition to network
* phase.
*/
splx(x);
return;
}
splx(x);
sppp_phase_network(sp);
}
static void
sppp_pap_tld(struct sppp *sp)
{
STDDCL;
if (debug)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "pap tld\n", SPP_ARGS(ifp));
UNTIMEOUT(pap.TO, (void *)sp, sp->ch[IDX_PAP]);
UNTIMEOUT(sppp_pap_my_TO, (void *)sp, sp->pap_my_to_ch);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->lcp.protos &= ~(1 << IDX_PAP);
lcp.Close(sp);
}
static void
sppp_pap_scr(struct sppp *sp)
{
u_char idlen, pwdlen;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->confid[IDX_PAP] = ++sp->pp_seq[IDX_PAP];
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
pwdlen = sppp_strnlen(sp->myauth.secret, AUTHKEYLEN);
idlen = sppp_strnlen(sp->myauth.name, AUTHNAMELEN);
sppp_auth_send(&pap, sp, PAP_REQ, sp->confid[IDX_PAP],
sizeof idlen, (const char *)&idlen,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
(size_t)idlen, sp->myauth.name,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sizeof pwdlen, (const char *)&pwdlen,
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
(size_t)pwdlen, sp->myauth.secret,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
0);
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
/*
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* Random miscellaneous functions.
*/
/*
* Send a PAP or CHAP proto packet.
*
* Varadic function, each of the elements for the ellipsis is of type
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
* ``size_t mlen, const u_char *msg''. Processing will stop iff
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* mlen == 0.
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
* NOTE: never declare variadic functions with types subject to type
* promotion (i.e. u_char). This is asking for big trouble depending
* on the architecture you are on...
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
*/
static void
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
sppp_auth_send(const struct cp *cp, struct sppp *sp,
unsigned int type, unsigned int id,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
...)
{
STDDCL;
struct ppp_header *h;
struct lcp_header *lh;
struct mbuf *m;
u_char *p;
int len;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
unsigned int mlen;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
const char *msg;
va_list ap;
MGETHDR (m, M_DONTWAIT, MT_DATA);
if (! m)
return;
m->m_pkthdr.rcvif = 0;
h = mtod (m, struct ppp_header*);
h->address = PPP_ALLSTATIONS; /* broadcast address */
h->control = PPP_UI; /* Unnumbered Info */
h->protocol = htons(cp->proto);
lh = (struct lcp_header*)(h + 1);
lh->type = type;
lh->ident = id;
p = (u_char*) (lh+1);
va_start(ap, id);
len = 0;
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
while ((mlen = (unsigned int)va_arg(ap, size_t)) != 0) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
msg = va_arg(ap, const char *);
len += mlen;
if (len > MHLEN - PPP_HEADER_LEN - LCP_HEADER_LEN) {
va_end(ap);
m_freem(m);
return;
}
bcopy(msg, p, mlen);
p += mlen;
}
va_end(ap);
m->m_pkthdr.len = m->m_len = PPP_HEADER_LEN + LCP_HEADER_LEN + len;
lh->len = htons (LCP_HEADER_LEN + len);
if (debug) {
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
log(LOG_DEBUG, SPP_FMT "%s output <%s id=0x%x len=%d",
SPP_ARGS(ifp), cp->name,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_auth_type_name(cp->proto, lh->type),
lh->ident, ntohs(lh->len));
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
sppp_print_bytes((u_char*) (lh+1), len);
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, ">\n");
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
Lock down the network interface queues. The queue mutex must be obtained before adding/removing packets from the queue. Also, the if_obytes and if_omcasts fields should only be manipulated under protection of the mutex. IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on the queue. An IF_LOCK macro is provided, as well as the old (mutex-less) versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which needs them, but their use is discouraged. Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF, which takes care of locking/enqueue, and also statistics updating/start if necessary.
2000-11-25 07:35:38 +00:00
if (! IF_HANDOFF_ADJ(&sp->pp_cpq, m, ifp, 3))
ifp->if_oerrors++;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
/*
* Flush interface queue.
*/
static void
sppp_qflush(struct ifqueue *ifq)
{
struct mbuf *m, *n;
n = ifq->ifq_head;
while ((m = n)) {
n = m->m_act;
m_freem (m);
}
ifq->ifq_head = 0;
ifq->ifq_tail = 0;
ifq->ifq_len = 0;
}
/*
* Send keepalive packets, every 10 seconds.
*/
static void
sppp_keepalive(void *dummy)
{
struct sppp *sp;
int s;
s = splimp();
for (sp=spppq; sp; sp=sp->pp_next) {
struct ifnet *ifp = &sp->pp_if;
/* Keepalive mode disabled or channel down? */
if (! (sp->pp_flags & PP_KEEPALIVE) ||
! (ifp->if_flags & IFF_RUNNING))
continue;
/* No keepalive in PPP mode if LCP not opened yet. */
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode != IFF_CISCO &&
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sp->pp_phase < PHASE_AUTHENTICATE)
continue;
if (sp->pp_alivecnt == MAXALIVECNT) {
/* No keepalive packets got. Stop the interface. */
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
printf (SPP_FMT "down\n", SPP_ARGS(ifp));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if_down (ifp);
sppp_qflush (&sp->pp_cpq);
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode != IFF_CISCO) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* XXX */
/* Shut down the PPP link. */
lcp.Down(sp);
/* Initiate negotiation. XXX */
lcp.Up(sp);
}
}
if (sp->pp_alivecnt <= MAXALIVECNT)
++sp->pp_alivecnt;
rganize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better, centralize the code. Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:26 +00:00
if (sp->pp_mode == IFF_CISCO)
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sppp_cisco_send (sp, CISCO_KEEPALIVE_REQ,
++sp->pp_seq[IDX_LCP], sp->pp_rseq[IDX_LCP]);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
else if (sp->pp_phase >= PHASE_AUTHENTICATE) {
long nmagic = htonl (sp->lcp.magic);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
sp->lcp.echoid = ++sp->pp_seq[IDX_LCP];
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_cp_send (sp, PPP_LCP, ECHO_REQ,
sp->lcp.echoid, 4, &nmagic);
}
}
splx(s);
clean up more timeout/untimeout portability stuff. make sure flags and stuff are set sensibly.
1998-12-26 12:14:31 +00:00
TIMEOUT(sppp_keepalive, 0, hz * 10, keepalive_ch);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
/*
* Get both IP addresses.
*/
static void
sppp_get_ip_addrs(struct sppp *sp, u_long *src, u_long *dst, u_long *srcmask)
{
struct ifnet *ifp = &sp->pp_if;
struct ifaddr *ifa;
struct sockaddr_in *si, *sm;
u_long ssrc, ddst;
Minor cleanup: kill a couple of unused variables, and a couple of uninitialized variables. Obtained from: The isdn4bsd project (partially)
1998-10-06 21:12:45 +00:00
sm = NULL;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
ssrc = ddst = 0L;
/*
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
* Pick the first AF_INET address from the list,
* aliases don't make any sense on a p2p link anyway.
*/
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
si = 0;
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link)
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#elif defined(__NetBSD__) || defined (__OpenBSD__)
Use <sys/queue.h> macro api rather than fondle its implementation detals. Created with: /usr/bin/sed Reviewed by: /sbin/md5
2001-02-03 11:46:35 +00:00
for (ifa = TAILQ_FIRST(&ifp->if_addrlist);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
ifa;
Use <sys/queue.h> macro api rather than fondle its implementation detals. Created with: /usr/bin/sed Reviewed by: /sbin/md5
2001-02-03 11:46:35 +00:00
ifa = TAILQ_NEXT(ifa, ifa_list))
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#else
for (ifa = ifp->if_addrlist;
ifa;
ifa = ifa->ifa_next)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (ifa->ifa_addr->sa_family == AF_INET) {
si = (struct sockaddr_in *)ifa->ifa_addr;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sm = (struct sockaddr_in *)ifa->ifa_netmask;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (si)
break;
}
if (ifa) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (si && si->sin_addr.s_addr) {
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
ssrc = si->sin_addr.s_addr;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
if (srcmask)
*srcmask = ntohl(sm->sin_addr.s_addr);
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
si = (struct sockaddr_in *)ifa->ifa_dstaddr;
if (si && si->sin_addr.s_addr)
ddst = si->sin_addr.s_addr;
}
if (dst) *dst = ntohl(ddst);
if (src) *src = ntohl(ssrc);
}
/*
* Set my IP address. Must be called at splimp.
*/
static void
sppp_set_ip_addr(struct sppp *sp, u_long src)
{
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
STDDCL;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
struct ifaddr *ifa;
struct sockaddr_in *si;
Update the hash table when sppp mucks directly with the interface address.
2001-10-01 18:14:49 +00:00
struct in_ifaddr *ia;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
/*
* Pick the first AF_INET address from the list,
* aliases don't make any sense on a p2p link anyway.
*/
Converge further on the isdn4bsd version of this file.
1998-12-26 12:43:26 +00:00
si = 0;
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link)
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#elif defined(__NetBSD__) || defined (__OpenBSD__)
Use <sys/queue.h> macro api rather than fondle its implementation detals. Created with: /usr/bin/sed Reviewed by: /sbin/md5
2001-02-03 11:46:35 +00:00
for (ifa = TAILQ_FIRST(&ifp->if_addrlist);
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
ifa;
Use <sys/queue.h> macro api rather than fondle its implementation detals. Created with: /usr/bin/sed Reviewed by: /sbin/md5
2001-02-03 11:46:35 +00:00
ifa = TAILQ_NEXT(ifa, ifa_list))
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
#else
for (ifa = ifp->if_addrlist;
ifa;
ifa = ifa->ifa_next)
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
#endif
{
if (ifa->ifa_addr->sa_family == AF_INET)
{
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
si = (struct sockaddr_in *)ifa->ifa_addr;
if (si)
break;
}
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
if (ifa && si)
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
{
int error;
#if __NetBSD_Version__ >= 103080000
struct sockaddr_in new_sin = *si;
new_sin.sin_addr.s_addr = htonl(src);
error = in_ifinit(ifp, ifatoia(ifa), &new_sin, 1);
if(debug && error)
{
log(LOG_DEBUG, SPP_FMT "sppp_set_ip_addr: in_ifinit "
" failed, error=%d\n", SPP_ARGS(ifp), error);
}
#else
/* delete old route */
error = rtinit(ifa, (int)RTM_DELETE, RTF_HOST);
if(debug && error)
{
log(LOG_DEBUG, SPP_FMT "sppp_set_ip_addr: rtinit DEL failed, error=%d\n",
SPP_ARGS(ifp), error);
}
/* set new address */
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
si->sin_addr.s_addr = htonl(src);
Update the hash table when sppp mucks directly with the interface address.
2001-10-01 18:14:49 +00:00
ia = ifatoia(ifa);
LIST_REMOVE(ia, ia_hash);
LIST_INSERT_HEAD(INADDR_HASH(si->sin_addr.s_addr), ia, ia_hash);
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
/* add new route */
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
error = rtinit(ifa, (int)RTM_ADD, RTF_HOST);
Update sppp support to i4b level. This includes the new spppcontrol program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
if (debug && error)
{
log(LOG_DEBUG, SPP_FMT "sppp_set_ip_addr: rtinit ADD failed, error=%d",
SPP_ARGS(ifp), error);
}
#endif
}
Fix my breakage to the low-level hardware sync drivers brought by the inclusion of VJ compression into sppp. Now, instead of the need to include this and that and everything plus the kitchensink in each of those drivers, struct sppp uses struct slcompress as an opaque structure only referenced by a pointer. The actual structure is then malloced at initialization time. While i was at it, also fixed a bug where received VJ packets would only be recognized if INET6 was defined.
2001-12-28 23:20:12 +00:00
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef INET6
/*
* Get both IPv6 addresses.
*/
static void
sppp_get_ip6_addrs(struct sppp *sp, struct in6_addr *src, struct in6_addr *dst,
struct in6_addr *srcmask)
{
struct ifnet *ifp = &sp->pp_if;
struct ifaddr *ifa;
struct sockaddr_in6 *si, *sm;
struct in6_addr ssrc, ddst;
sm = NULL;
bzero(&ssrc, sizeof(ssrc));
bzero(&ddst, sizeof(ddst));
/*
* Pick the first link-local AF_INET6 address from the list,
* aliases don't make any sense on a p2p link anyway.
*/
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
for (ifa = ifp->if_addrhead.tqh_first, si = 0;
ifa;
ifa = ifa->ifa_link.tqe_next)
#elif defined(__NetBSD__) || defined (__OpenBSD__)
for (ifa = ifp->if_addrlist.tqh_first, si = 0;
ifa;
ifa = ifa->ifa_list.tqe_next)
#else
for (ifa = ifp->if_addrlist, si = 0;
ifa;
ifa = ifa->ifa_next)
#endif
if (ifa->ifa_addr->sa_family == AF_INET6) {
si = (struct sockaddr_in6 *)ifa->ifa_addr;
sm = (struct sockaddr_in6 *)ifa->ifa_netmask;
if (si && IN6_IS_ADDR_LINKLOCAL(&si->sin6_addr))
break;
}
if (ifa) {
if (si && !IN6_IS_ADDR_UNSPECIFIED(&si->sin6_addr)) {
bcopy(&si->sin6_addr, &ssrc, sizeof(ssrc));
if (srcmask) {
bcopy(&sm->sin6_addr, srcmask,
sizeof(*srcmask));
}
}
si = (struct sockaddr_in6 *)ifa->ifa_dstaddr;
if (si && !IN6_IS_ADDR_UNSPECIFIED(&si->sin6_addr))
bcopy(&si->sin6_addr, &ddst, sizeof(ddst));
}
if (dst)
bcopy(&ddst, dst, sizeof(*dst));
if (src)
bcopy(&ssrc, src, sizeof(*src));
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
}
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef IPV6CP_MYIFID_DYN
/*
* Generate random ifid.
*/
static void
sppp_gen_ip6_addr(struct sppp *sp, struct in6_addr *addr)
{
/* TBD */
}
/*
* Set my IPv6 address. Must be called at splimp.
*/
static void
sppp_set_ip6_addr(struct sppp *sp, const struct in6_addr *src)
{
STDDCL;
struct ifaddr *ifa;
struct sockaddr_in6 *sin6;
/*
* Pick the first link-local AF_INET6 address from the list,
* aliases don't make any sense on a p2p link anyway.
*/
sin6 = NULL;
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
for (ifa = ifp->if_addrhead.tqh_first;
ifa;
ifa = ifa->ifa_link.tqe_next)
#elif defined(__NetBSD__) || defined (__OpenBSD__)
for (ifa = ifp->if_addrlist.tqh_first;
ifa;
ifa = ifa->ifa_list.tqe_next)
#else
for (ifa = ifp->if_addrlist; ifa; ifa = ifa->ifa_next)
#endif
{
if (ifa->ifa_addr->sa_family == AF_INET6)
{
sin6 = (struct sockaddr_in6 *)ifa->ifa_addr;
if (sin6 && IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr))
break;
}
}
if (ifa && sin6)
{
int error;
struct sockaddr_in6 new_sin6 = *sin6;
bcopy(src, &new_sin6.sin6_addr, sizeof(new_sin6.sin6_addr));
error = in6_ifinit(ifp, ifatoia6(ifa), &new_sin6, 1);
if (debug && error)
{
log(LOG_DEBUG, SPP_FMT "sppp_set_ip6_addr: in6_ifinit "
" failed, error=%d\n", SPP_ARGS(ifp), error);
}
}
}
#endif
/*
* Suggest a candidate address to be used by peer.
*/
static void
sppp_suggest_ip6_addr(struct sppp *sp, struct in6_addr *suggest)
{
struct in6_addr myaddr;
struct timeval tv;
sppp_get_ip6_addrs(sp, &myaddr, 0, 0);
myaddr.s6_addr[8] &= ~0x02; /* u bit to "local" */
microtime(&tv);
if ((tv.tv_usec & 0xff) == 0 && (tv.tv_sec & 0xff) == 0) {
myaddr.s6_addr[14] ^= 0xff;
myaddr.s6_addr[15] ^= 0xff;
} else {
myaddr.s6_addr[14] ^= (tv.tv_usec & 0xff);
myaddr.s6_addr[15] ^= (tv.tv_sec & 0xff);
}
if (suggest)
bcopy(&myaddr, suggest, sizeof(myaddr));
}
#endif /*INET6*/
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static int
Fixed yet more ioctl breakage due to the type of the `cmd' arg changing from int to u_long but not changing here.
1998-08-15 21:58:09 +00:00
sppp_params(struct sppp *sp, u_long cmd, void *data)
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
{
Fixed yet more ioctl breakage due to the type of the `cmd' arg changing from int to u_long but not changing here.
1998-08-15 21:58:09 +00:00
u_long subcmd;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
struct ifreq *ifr = (struct ifreq *)data;
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
struct spppreq *spr;
int rv = 0;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if ((spr = malloc(sizeof(struct spppreq), M_TEMP, M_NOWAIT)) == 0)
return (EAGAIN);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/*
* ifr->ifr_data is supposed to point to a struct spppreq.
* Check the cmd word first before attempting to fetch all the
* data.
*/
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if ((subcmd = fuword(ifr->ifr_data)) == -1) {
rv = EFAULT;
goto quit;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if (copyin((caddr_t)ifr->ifr_data, spr, sizeof(struct spppreq)) != 0) {
rv = EFAULT;
goto quit;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
switch (subcmd) {
"pointers are not permitted as case values", so force the macros to ints.
2002-05-01 04:18:36 +00:00
case (int)SPPPIOGDEFS:
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if (cmd != SIOCGIFGENERIC) {
rv = EINVAL;
break;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/*
* We copy over the entire current state, but clean
* out some of the stuff we don't wanna pass up.
* Remember, SIOCGIFGENERIC is unprotected, and can be
* called by any user. No need to ever get PAP or
* CHAP secrets back to userland anyway.
*/
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
spr->defs.pp_phase = sp->pp_phase;
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
spr->defs.enable_vj = (sp->confflags & CONF_ENABLE_VJ) != 0;
spr->defs.enable_ipv6 = (sp->confflags & CONF_ENABLE_IPV6) != 0;
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
spr->defs.lcp = sp->lcp;
spr->defs.ipcp = sp->ipcp;
spr->defs.ipv6cp = sp->ipv6cp;
spr->defs.myauth = sp->myauth;
spr->defs.hisauth = sp->hisauth;
bzero(spr->defs.myauth.secret, AUTHKEYLEN);
bzero(spr->defs.myauth.challenge, AUTHKEYLEN);
bzero(spr->defs.hisauth.secret, AUTHKEYLEN);
bzero(spr->defs.hisauth.challenge, AUTHKEYLEN);
Make the LCP restart timer configurable. This (effectively) merges rev 1.36 of i4b's old if_spppsubr.c, albeit in a slightly different manner (we export the timer in millisecond values as exposed to tick values from/to userland). Obtained from: i4b MFC after: 1 month
2001-12-27 21:20:05 +00:00
/*
* Fixup the LCP timeout value to milliseconds so
* spppcontrol doesn't need to bother about the value
* of "hz". We do the reverse calculation below when
* setting it.
*/
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
spr->defs.lcp.timeout = sp->lcp.timeout * 1000 / hz;
rv = copyout(spr, (caddr_t)ifr->ifr_data,
sizeof(struct spppreq));
break;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
"pointers are not permitted as case values", so force the macros to ints.
2002-05-01 04:18:36 +00:00
case (int)SPPPIOSDEFS:
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if (cmd != SIOCSIFGENERIC) {
rv = EINVAL;
break;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/*
Make the LCP restart timer configurable. This (effectively) merges rev 1.36 of i4b's old if_spppsubr.c, albeit in a slightly different manner (we export the timer in millisecond values as exposed to tick values from/to userland). Obtained from: i4b MFC after: 1 month
2001-12-27 21:20:05 +00:00
* We have a very specific idea of which fields we
* allow being passed back from userland, so to not
* clobber our current state. For one, we only allow
* setting anything if LCP is in dead or establish
* phase. Once the authentication negotiations
* started, the authentication settings must not be
* changed again. (The administrator can force an
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
* ifconfig down in order to get LCP back into dead
* phase.)
*
* Also, we only allow for authentication parameters to be
* specified.
*
* XXX Should allow to set or clear pp_flags.
*
* Finally, if the respective authentication protocol to
* be used is set differently than 0, but the secret is
* passed as all zeros, we don't trash the existing secret.
* This allows an administrator to change the system name
* only without clobbering the secret (which he didn't get
* back in a previous SPPPIOGDEFS call). However, the
* secrets are cleared if the authentication protocol is
Make the LCP restart timer configurable. This (effectively) merges rev 1.36 of i4b's old if_spppsubr.c, albeit in a slightly different manner (we export the timer in millisecond values as exposed to tick values from/to userland). Obtained from: i4b MFC after: 1 month
2001-12-27 21:20:05 +00:00
* reset to 0. */
if (sp->pp_phase != PHASE_DEAD &&
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
sp->pp_phase != PHASE_ESTABLISH) {
rv = EBUSY;
break;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if ((spr->defs.myauth.proto != 0 && spr->defs.myauth.proto != PPP_PAP &&
spr->defs.myauth.proto != PPP_CHAP) ||
(spr->defs.hisauth.proto != 0 && spr->defs.hisauth.proto != PPP_PAP &&
spr->defs.hisauth.proto != PPP_CHAP)) {
rv = EINVAL;
break;
}
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if (spr->defs.myauth.proto == 0)
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* resetting myauth */
bzero(&sp->myauth, sizeof sp->myauth);
else {
/* setting/changing myauth */
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
sp->myauth.proto = spr->defs.myauth.proto;
bcopy(spr->defs.myauth.name, sp->myauth.name, AUTHNAMELEN);
if (spr->defs.myauth.secret[0] != '\0')
bcopy(spr->defs.myauth.secret, sp->myauth.secret,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
AUTHKEYLEN);
}
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if (spr->defs.hisauth.proto == 0)
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* resetting hisauth */
bzero(&sp->hisauth, sizeof sp->hisauth);
else {
/* setting/changing hisauth */
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
sp->hisauth.proto = spr->defs.hisauth.proto;
sp->hisauth.flags = spr->defs.hisauth.flags;
bcopy(spr->defs.hisauth.name, sp->hisauth.name, AUTHNAMELEN);
if (spr->defs.hisauth.secret[0] != '\0')
bcopy(spr->defs.hisauth.secret, sp->hisauth.secret,
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
AUTHKEYLEN);
}
Make the LCP restart timer configurable. This (effectively) merges rev 1.36 of i4b's old if_spppsubr.c, albeit in a slightly different manner (we export the timer in millisecond values as exposed to tick values from/to userland). Obtained from: i4b MFC after: 1 month
2001-12-27 21:20:05 +00:00
/* set LCP restart timer timeout */
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
if (spr->defs.lcp.timeout != 0)
sp->lcp.timeout = spr->defs.lcp.timeout * hz / 1000;
Implement an option to administratively disable the negotiation of IPv6 on an sppp interface. In an IPv6-enabled kernel, every IPv6 interface automatically gets an IPv6 address assigned (and IPv6 multicast packets sent at initialization time). For sppp links where we know our remote peer wouldn't support IPv6 at all, there's no point in attempting to negotiate IPV6CP (or to even dial out for an IPv6 packet at all for dial-on-demand interfaces). I wish there were a more generic way to administratively disable IPv6 on an interface instead. ume told me there isn't. While i was at it, converted both, enable_vj and enable_ipv6 into flag bits in struct sppp (enable_vj used to be an int of its own). MFC after: 1 month
2001-12-30 20:42:29 +00:00
/* set VJ enable and IPv6 disable flags */
#ifdef INET
if (spr->defs.enable_vj)
sp->confflags |= CONF_ENABLE_VJ;
else
sp->confflags &= ~CONF_ENABLE_VJ;
#endif
#ifdef INET6
if (spr->defs.enable_ipv6)
sp->confflags |= CONF_ENABLE_IPV6;
else
sp->confflags &= ~CONF_ENABLE_IPV6;
#endif
Fix a misplaced break statement within a switch that accidentally made it into an "#ifdef INET6" block. This caused a (harmless but annoying) EINVAL return value to be sent even though the operation completed successfully. PR: kern/37786 Submitted by: Ari Suutari <ari.suutari@syncrontech.com>,David Malone <dwmalone@maths.tcd.ie> MFC after: 1 day
2002-05-10 12:48:09 +00:00
break;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
default:
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
rv = EINVAL;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
Convert sppp_params() to use a malloced structure in order to reduce kernel stack usage. This effectively merges rev 1.3 of i4b's i4b_ispppsubr.c. MFC after: 1 month
2001-12-28 23:36:35 +00:00
quit:
free(spr, M_TEMP);
return (rv);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
static void
sppp_phase_network(struct sppp *sp)
{
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
STDDCL;
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
int i;
u_long mask;
sp->pp_phase = PHASE_NETWORK;
More isdn4bsd convergence: cleanup log messages.
1998-12-26 13:14:45 +00:00
if (debug)
log(LOG_DEBUG, SPP_FMT "phase %s\n", SPP_ARGS(ifp),
sppp_phase_name(sp->pp_phase));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
/* Notify NCPs now. */
for (i = 0; i < IDX_COUNT; i++)
if ((cps[i])->flags & CP_NCP)
(cps[i])->Open(sp);
/* Send Up events to all NCPs. */
for (i = 0, mask = 1; i < IDX_COUNT; i++, mask <<= 1)
Fix a long-standing blatant bug where the operator precedence between & and && has been botched. This was likely the cause for some havoc with various negotiation cases of sppp in the past. Obtained from: NetBSD (rev 1.13) MFC after: 1 week
2001-12-30 17:12:28 +00:00
if ((sp->lcp.protos & mask) && ((cps[i])->flags & CP_NCP))
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
(cps[i])->Up(sp);
/* if no NCP is starting, all this was in vain, close down */
sppp_lcp_check_and_close(sp);
}
Various fixes to make leased line operation more robust. On lcp_up, start to negotiate from scratch. Make leased lines survive being put into loopback mode. Bits and pieces and ideas taken from PRs 11238 and 21771. Make it a module so that it can be kldloaded. Whitespace cleanup. (Can be ignored with "cvs diff -b".) PR: 11238 and 21771 (bits and pieces)
2000-12-19 19:08:11 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
static const char *
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_cp_type_name(u_char type)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static char buf[12];
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
switch (type) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case CONF_REQ: return "conf-req";
case CONF_ACK: return "conf-ack";
case CONF_NAK: return "conf-nak";
case CONF_REJ: return "conf-rej";
case TERM_REQ: return "term-req";
case TERM_ACK: return "term-ack";
case CODE_REJ: return "code-rej";
case PROTO_REJ: return "proto-rej";
case ECHO_REQ: return "echo-req";
case ECHO_REPLY: return "echo-reply";
case DISC_REQ: return "discard-req";
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
snprintf (buf, sizeof(buf), "cp/0x%x", type);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return buf;
}
static const char *
sppp_auth_type_name(u_short proto, u_char type)
{
static char buf[12];
switch (proto) {
case PPP_CHAP:
switch (type) {
case CHAP_CHALLENGE: return "challenge";
case CHAP_RESPONSE: return "response";
case CHAP_SUCCESS: return "success";
case CHAP_FAILURE: return "failure";
}
case PPP_PAP:
switch (type) {
case PAP_REQ: return "req";
case PAP_ACK: return "ack";
case PAP_NAK: return "nak";
}
}
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
snprintf (buf, sizeof(buf), "auth/0x%x", type);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return buf;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Make sppp's logging human-readable. Also, use log(9), as opposed to printf(9), so the log output doesn't clutter the console. While i was at it, KNFified some function definitions. This file was very inconsistent in this respect.
1997-05-11 10:04:24 +00:00
static const char *
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
sppp_lcp_opt_name(u_char opt)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static char buf[12];
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (opt) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case LCP_OPT_MRU: return "mru";
case LCP_OPT_ASYNC_MAP: return "async-map";
case LCP_OPT_AUTH_PROTO: return "auth-proto";
case LCP_OPT_QUAL_PROTO: return "qual-proto";
case LCP_OPT_MAGIC: return "magic";
case LCP_OPT_PROTO_COMP: return "proto-comp";
case LCP_OPT_ADDR_COMP: return "addr-comp";
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
snprintf (buf, sizeof(buf), "lcp/0x%x", opt);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return buf;
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
static const char *
sppp_ipcp_opt_name(u_char opt)
{
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static char buf[12];
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
switch (opt) {
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case IPCP_OPT_ADDRESSES: return "addresses";
case IPCP_OPT_COMPRESSION: return "compression";
case IPCP_OPT_ADDRESS: return "address";
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
snprintf (buf, sizeof(buf), "ipcp/0x%x", opt);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return buf;
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef INET6
static const char *
sppp_ipv6cp_opt_name(u_char opt)
{
static char buf[12];
switch (opt) {
case IPV6CP_OPT_IFID: return "ifid";
case IPV6CP_OPT_COMPRESSION: return "compression";
}
sprintf (buf, "0x%x", opt);
return buf;
}
#endif
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
static const char *
sppp_state_name(int state)
{
switch (state) {
case STATE_INITIAL: return "initial";
case STATE_STARTING: return "starting";
case STATE_CLOSED: return "closed";
case STATE_STOPPED: return "stopped";
case STATE_CLOSING: return "closing";
case STATE_STOPPING: return "stopping";
case STATE_REQ_SENT: return "req-sent";
case STATE_ACK_RCVD: return "ack-rcvd";
case STATE_ACK_SENT: return "ack-sent";
case STATE_OPENED: return "opened";
}
return "illegal";
}
static const char *
sppp_phase_name(enum ppp_phase phase)
{
switch (phase) {
case PHASE_DEAD: return "dead";
case PHASE_ESTABLISH: return "establish";
case PHASE_TERMINATE: return "terminate";
case PHASE_AUTHENTICATE: return "authenticate";
case PHASE_NETWORK: return "network";
}
return "illegal";
}
static const char *
sppp_proto_name(u_short proto)
{
static char buf[12];
switch (proto) {
case PPP_LCP: return "lcp";
case PPP_IPCP: return "ipcp";
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
case PPP_PAP: return "pap";
case PPP_CHAP: return "chap";
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
case PPP_IPV6CP: return "ipv6cp";
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
}
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
snprintf(buf, sizeof(buf), "proto/0x%x", (unsigned)proto);
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
return buf;
}
Another mega commit to staticize things.
1995-12-14 09:55:16 +00:00
static void
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
sppp_print_bytes(const u_char *p, u_short len)
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
{
Remove all the #ifdef notyet stuff, it is probably never going to happen in the first place. Use 3sec timeout as recommended. Reorder some debug messages. Label som of the 0x%x in debug messages Make sppp_print_bytes() use %*D and handle zero length. If we don't have MAGIC numbers, don't yell loopback if 0 == 0
1999-02-19 13:45:09 +00:00
if (len)
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, " %*D", len, p, "-");
Cronyx/Sigma sync/async serial driver with PPP support from Serge Vakulenko
1994-12-02 23:23:01 +00:00
}
Major overhaul of the SyncPPP layer. Basically, this comprises now a full implementation of the sate machine as described in RFC1661, and provides support for plugging in various control protocols. I needed this to provide PPP support for the BISDN project (right now). Unfortunatley, while the existing API was almost up to the point, i needed one minor API change in order to decouple the this-layer- started and this-layer-finished actions from the respective Up and Down events of the lower layer. This requires two additional lines in the attach routines of all existing lower layer interface drivers that are using syncPPP (shortcutting these actions and events). Apart from this, i believe i didn't change the API of all this, so everything should plug in without too many hassles. Please report if i broke something in the existing drivers. For a list of features (including new ones like dial-on-demand), and things still to be done, please refer to the man page i'll commit asap. Encouraged by: Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
static void
sppp_print_string(const char *p, u_short len)
{
u_char c;
while (len-- > 0) {
c = *p++;
/*
* Print only ASCII chars directly. RFC 1994 recommends
* using only them, but we don't rely on it. */
if (c < ' ' || c > '~')
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "\\x%x", c);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
else
Make log(-1, ...) do what addlog(...) did. Replace all uses of addlog(...) with log(-1, ...) Remove bogus "register" keywords in subr_prf.c Make log() return void.
2000-11-26 19:34:06 +00:00
log(-1, "%c", c);
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
}
}
static const char *
sppp_dotted_quad(u_long addr)
{
static char s[16];
sprintf(s, "%d.%d.%d.%d",
In an attempt to reduce the huge number of differences between the FreeBSD repository version of this file and the isdn4bsd version, adopt those changes from the i4b version that make this file BSD-version independent. I attempted to avoid uglifying this file too much, thus deviated a little from the i4b version (and hope they will adopt the changes, too). The diffs mostly concentrate on: . #include differences between the systems . different callout handling between FreeBSD vs. Net/OpenBSD . interface naming (Net/OpenBSD store the ASCII name including the unit # in struct ifnet, FreeBSD only the name) . use of random() in FreeBSD vs. time-based pseudo-randomization in Net/OpenBSD (for loopback detection ad CHAP challenges -- i assume at least OpenBSD could also benefit from random(), but that's the way i've got this file) . interface address list elements are named a little differently between FreeBSD and Net/OpenBSD I attempted to segregate those compat fixes from other code fixes and enhancements. Obtained from: The isdn4bsd project
1998-10-06 20:47:53 +00:00
(int)((addr >> 24) & 0xff),
(int)((addr >> 16) & 0xff),
(int)((addr >> 8) & 0xff),
Fixed printf format errors. sppp_dotted_quad() was yet another private, broken, version of inet_ntoa(). It should go away.
1998-08-17 00:29:34 +00:00
(int)(addr & 0xff));
Jumbo patch to implement PAP and CHAP for sppp(4). Partially based on Serge's (Cronyx's) code in the vendor branch. (FR support not yet merged.)
1997-10-11 11:25:28 +00:00
return s;
}
static int
sppp_strnlen(u_char *p, int max)
{
int len;
for (len = 0; len < max && *p; ++p)
++len;
return len;
}
/* a dummy, used to drop uninteresting events */
static void
sppp_null(struct sppp *unused)
{
/* do just nothing */
}
Reference in New Issue Copy Permalink