freebsd-nq/sys/ufs/ffs/ffs_vfsops.c

1547 lines
41 KiB
C
Raw Normal View History

1994-05-24 10:09:53 +00:00
/*
* Copyright (c) 1989, 1991, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ffs_vfsops.c 8.31 (Berkeley) 5/20/95
1994-05-24 10:09:53 +00:00
*/
2003-06-11 06:34:30 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_mac.h"
1996-01-05 18:31:58 +00:00
#include "opt_quota.h"
#include "opt_ufs.h"
1996-01-05 18:31:58 +00:00
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/namei.h>
#include <sys/proc.h>
#include <sys/kernel.h>
#include <sys/mac.h>
1994-05-24 10:09:53 +00:00
#include <sys/vnode.h>
#include <sys/mount.h>
#include <sys/bio.h>
1994-05-24 10:09:53 +00:00
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/disk.h>
1994-05-24 10:09:53 +00:00
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <ufs/ufs/extattr.h>
1994-05-24 10:09:53 +00:00
#include <ufs/ufs/quota.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufs_extern.h>
#include <ufs/ffs/fs.h>
#include <ufs/ffs/ffs_extern.h>
#include <vm/vm.h>
#include <vm/uma.h>
#include <vm/vm_page.h>
uma_zone_t uma_inode, uma_ufs1, uma_ufs2;
2002-03-19 22:40:48 +00:00
static int ffs_sbupdate(struct ufsmount *, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int ffs_reload(struct mount *,struct ucred *,struct thread *);
static int ffs_mountfs(struct vnode *, struct mount *, struct thread *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static void ffs_oldfscompat_read(struct fs *, struct ufsmount *,
ufs2_daddr_t);
static void ffs_oldfscompat_write(struct fs *, struct ufsmount *);
static void ffs_ifree(struct ufsmount *ump, struct inode *ip);
static vfs_init_t ffs_init;
static vfs_uninit_t ffs_uninit;
static vfs_extattrctl_t ffs_extattrctl;
1994-05-24 10:09:53 +00:00
1998-02-09 06:11:36 +00:00
static struct vfsops ufs_vfsops = {
.vfs_extattrctl = ffs_extattrctl,
.vfs_fhtovp = ffs_fhtovp,
.vfs_init = ffs_init,
.vfs_mount = ffs_mount,
.vfs_quotactl = ufs_quotactl,
.vfs_root = ufs_root,
.vfs_start = ufs_start,
.vfs_statfs = ffs_statfs,
.vfs_sync = ffs_sync,
.vfs_uninit = ffs_uninit,
.vfs_unmount = ffs_unmount,
.vfs_vget = ffs_vget,
.vfs_vptofh = ffs_vptofh,
1994-05-24 10:09:53 +00:00
};
VFS_SET(ufs_vfsops, ufs, 0);
1994-05-24 10:09:53 +00:00
/*
* ffs_mount
*
* Called when mounting local physical media
*
* PARAMETERS:
* mountroot
* mp mount point structure
* path NULL (flag for root mount!!!)
* data <unused>
* ndp <unused>
* p process (user credentials check [statfs])
*
* mount
* mp mount point structure
* path path to mount point
* data pointer to argument struct in user space
* ndp mount point namei() return (used for
* credentials on reload), reused to look
* up block device.
* p process (user credentials check)
*
* RETURNS: 0 Success
* !0 error number (errno.h)
*
* LOCK STATE:
1994-05-24 10:09:53 +00:00
*
* ENTRY
* mount point is locked
* EXIT
* mount point is locked
*
* NOTES:
* A NULL path can be used for a flag since the mount
* system call will fail with EFAULT in copyinstr in
* namei() if it is a genuine NULL from the user.
1994-05-24 10:09:53 +00:00
*/
Initial commit of IFS - a inode-namespaced FFS. Here is a short description: How it works: -- Basically ifs is a copy of ffs, overriding some vfs/vnops. (Yes, hack.) I didn't see the need in duplicating all of sys/ufs/ffs to get this off the ground. File creation is done through a special file - 'newfile' . When newfile is called, the system allocates and returns an inode. Note that newfile is done in a cloning fashion: fd = open("newfile", O_CREAT|O_RDWR, 0644); fstat(fd, &st); printf("new file is %d\n", (int)st.st_ino); Once you have created a file, you can open() and unlink() it by its returned inode number retrieved from the stat call, ie: fd = open("5", O_RDWR); The creation permissions depend entirely if you have write access to the root directory of the filesystem. To get the list of currently allocated inodes, VOP_READDIR has been added which returns a directory listing of those currently allocated. -- What this entails: * patching conf/files and conf/options to include IFS as a new compile option (and since ifs depends upon FFS, include the FFS routines) * An entry in i386/conf/NOTES indicating IFS exists and where to go for an explanation * Unstaticize a couple of routines in src/sys/ufs/ffs/ which the IFS routines require (ffs_mount() and ffs_reload()) * a new bunch of routines in src/sys/ufs/ifs/ which implement the IFS routines. IFS replaces some of the vfsops, and a handful of vnops - most notably are VFS_VGET(), VOP_LOOKUP(), VOP_UNLINK() and VOP_READDIR(). Any other directory operation is marked as invalid. What this results in: * an IFS partition's create permissions are controlled by the perm/ownership of the root mount point, just like a normal directory * Each inode has perm and ownership too * IFS does *NOT* mean an FFS partition can be opened per inode. This is a completely seperate filesystem here * Softupdates doesn't work with IFS, and really I don't think it needs it. Besides, fsck's are FAST. (Try it :-) * Inodes 0 and 1 aren't allocatable because they are special (dump/swap IIRC). Inode 2 isn't allocatable since UFS/FFS locks all inodes in the system against this particular inode, and unravelling THAT code isn't trivial. Therefore, useful inodes start at 3. Enjoy, and feedback is definitely appreciated!
2000-10-14 03:02:30 +00:00
int
ffs_mount(mp, path, data, ndp, td)
struct mount *mp; /* mount struct pointer*/
char *path; /* path to mount point*/
caddr_t data; /* arguments to FS specific mount*/
struct nameidata *ndp; /* mount point credentials*/
struct thread *td; /* process requesting mount*/
1994-05-24 10:09:53 +00:00
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
size_t size;
struct vnode *devvp;
struct ufs_args args;
struct ufsmount *ump = 0;
struct fs *fs;
int error, flags;
mode_t accessmode;
1995-05-30 08:16:23 +00:00
if (uma_inode == NULL) {
uma_inode = uma_zcreate("FFS inode",
sizeof(struct inode), NULL, NULL, NULL, NULL,
UMA_ALIGN_PTR, 0);
uma_ufs1 = uma_zcreate("FFS1 dinode",
sizeof(struct ufs1_dinode), NULL, NULL, NULL, NULL,
UMA_ALIGN_PTR, 0);
uma_ufs2 = uma_zcreate("FFS2 dinode",
sizeof(struct ufs2_dinode), NULL, NULL, NULL, NULL,
UMA_ALIGN_PTR, 0);
}
1994-05-24 10:09:53 +00:00
/*
2002-05-16 21:28:32 +00:00
* Use NULL path to indicate we are mounting the root filesystem.
1994-05-24 10:09:53 +00:00
*/
if (path == NULL) {
if ((error = bdevvp(rootdev, &rootvp))) {
printf("ffs_mountroot: can't find rootvp\n");
return (error);
}
if ((error = ffs_mountfs(rootvp, mp, td)) != 0)
return (error);
(void)VFS_STATFS(mp, &mp->mnt_stat, td);
return (0);
1994-05-24 10:09:53 +00:00
}
/*
2002-05-16 21:28:32 +00:00
* Mounting non-root filesystem or updating a filesystem
*/
if ((error = copyin(data, (caddr_t)&args, sizeof(struct ufs_args)))!= 0)
return (error);
1994-05-24 10:09:53 +00:00
/*
* If updating, check whether changing from read-only to
* read/write; if there is no device name, that's all we do.
*/
if (mp->mnt_flag & MNT_UPDATE) {
ump = VFSTOUFS(mp);
fs = ump->um_fs;
devvp = ump->um_devvp;
if (fs->fs_ronly == 0 && (mp->mnt_flag & MNT_RDONLY)) {
if ((error = vn_start_write(NULL, &mp, V_WAIT)) != 0)
return (error);
/*
* Flush any dirty data.
*/
if ((error = VFS_SYNC(mp, MNT_WAIT,
td->td_ucred, td)) != 0) {
vn_finished_write(mp);
return (error);
}
/*
* Check for and optionally get rid of files open
* for writing.
*/
1994-05-24 10:09:53 +00:00
flags = WRITECLOSE;
if (mp->mnt_flag & MNT_FORCE)
flags |= FORCECLOSE;
if (mp->mnt_flag & MNT_SOFTDEP) {
error = softdep_flushfiles(mp, flags, td);
} else {
error = ffs_flushfiles(mp, flags, td);
}
if (error) {
vn_finished_write(mp);
return (error);
}
if (fs->fs_pendingblocks != 0 ||
fs->fs_pendinginodes != 0) {
printf("%s: %s: blocks %jd files %d\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_fsmnt, "update error",
(intmax_t)fs->fs_pendingblocks,
fs->fs_pendinginodes);
fs->fs_pendingblocks = 0;
fs->fs_pendinginodes = 0;
}
fs->fs_ronly = 1;
if ((fs->fs_flags & (FS_UNCLEAN | FS_NEEDSFSCK)) == 0)
fs->fs_clean = 1;
if ((error = ffs_sbupdate(ump, MNT_WAIT)) != 0) {
fs->fs_ronly = 0;
fs->fs_clean = 0;
vn_finished_write(mp);
return (error);
}
vn_finished_write(mp);
}
if ((mp->mnt_flag & MNT_RELOAD) &&
(error = ffs_reload(mp, ndp->ni_cnd.cn_cred, td)) != 0)
return (error);
if (fs->fs_ronly && (mp->mnt_kern_flag & MNTK_WANTRDWR)) {
/*
* If upgrade to read-write by non-root, then verify
* that user has necessary permissions on the device.
*/
if (suser(td)) {
vn_lock(devvp, LK_EXCLUSIVE | LK_RETRY, td);
if ((error = VOP_ACCESS(devvp, VREAD | VWRITE,
td->td_ucred, td)) != 0) {
VOP_UNLOCK(devvp, 0, td);
return (error);
}
VOP_UNLOCK(devvp, 0, td);
}
fs->fs_flags &= ~FS_UNCLEAN;
if (fs->fs_clean == 0) {
fs->fs_flags |= FS_UNCLEAN;
if ((mp->mnt_flag & MNT_FORCE) ||
((fs->fs_flags & FS_NEEDSFSCK) == 0 &&
(fs->fs_flags & FS_DOSOFTDEP))) {
printf("WARNING: %s was not %s\n",
fs->fs_fsmnt, "properly dismounted");
} else {
printf(
"WARNING: R/W mount of %s denied. Filesystem is not clean - run fsck\n",
fs->fs_fsmnt);
return (EPERM);
}
}
if ((error = vn_start_write(NULL, &mp, V_WAIT)) != 0)
return (error);
fs->fs_ronly = 0;
fs->fs_clean = 0;
if ((error = ffs_sbupdate(ump, MNT_WAIT)) != 0) {
vn_finished_write(mp);
return (error);
}
/* check to see if we need to start softdep */
if ((fs->fs_flags & FS_DOSOFTDEP) &&
(error = softdep_mount(devvp, mp, fs, td->td_ucred))){
vn_finished_write(mp);
return (error);
}
if (fs->fs_snapinum[0] != 0)
ffs_snapshot_mount(mp);
vn_finished_write(mp);
}
/*
* Soft updates is incompatible with "async",
* so if we are doing softupdates stop the user
* from setting the async flag in an update.
* Softdep_mount() clears it in an initial mount
* or ro->rw remount.
*/
if (mp->mnt_flag & MNT_SOFTDEP)
mp->mnt_flag &= ~MNT_ASYNC;
/*
* If not updating name, process export requests.
*/
if (args.fspec == 0)
return (vfs_export(mp, &args.export));
/*
* If this is a snapshot request, take the snapshot.
*/
if (mp->mnt_flag & MNT_SNAPSHOT)
return (ffs_snapshot(mp, args.fspec));
1994-05-24 10:09:53 +00:00
}
1994-05-24 10:09:53 +00:00
/*
* Not an update, or updating the name: look up the name
* and verify that it refers to a sensible disk device.
1994-05-24 10:09:53 +00:00
*/
NDINIT(ndp, LOOKUP, FOLLOW, UIO_USERSPACE, args.fspec, td);
if ((error = namei(ndp)) != 0)
return (error);
NDFREE(ndp, NDF_ONLY_PNBUF);
1994-05-24 10:09:53 +00:00
devvp = ndp->ni_vp;
if (!vn_isdisk(devvp, &error)) {
vrele(devvp);
return (error);
}
/*
* If mount by non-root, then verify that user has necessary
* permissions on the device.
*/
if (suser(td)) {
accessmode = VREAD;
if ((mp->mnt_flag & MNT_RDONLY) == 0)
accessmode |= VWRITE;
vn_lock(devvp, LK_EXCLUSIVE | LK_RETRY, td);
if ((error = VOP_ACCESS(devvp, accessmode, td->td_ucred, td))!= 0){
vput(devvp);
return (error);
}
VOP_UNLOCK(devvp, 0, td);
}
if (mp->mnt_flag & MNT_UPDATE) {
/*
* Update only
*
* If it's not the same vnode, or at least the same device
* then it's not correct.
*/
if (devvp != ump->um_devvp &&
devvp->v_rdev != ump->um_devvp->v_rdev)
error = EINVAL; /* needs translation */
vrele(devvp);
if (error)
return (error);
} else {
/*
* New mount
*
* We need the name for the mount point (also used for
* "last mounted on") copied in. If an error occurs,
* the mount point is discarded by the upper level code.
* Note that vfs_mount() populates f_mntonname for us.
*/
if ((error = ffs_mountfs(devvp, mp, td)) != 0) {
vrele(devvp);
return (error);
}
1994-05-24 10:09:53 +00:00
}
/*
* Save "mounted from" device name info for mount point (NULL pad).
*/
copyinstr(args.fspec, mp->mnt_stat.f_mntfromname, MNAMELEN - 1, &size);
bzero( mp->mnt_stat.f_mntfromname + size, MNAMELEN - size);
/*
* Initialize filesystem stat information in mount struct.
*/
(void)VFS_STATFS(mp, &mp->mnt_stat, td);
return (0);
1994-05-24 10:09:53 +00:00
}
/*
* Reload all incore data for a filesystem (used after running fsck on
* the root filesystem and finding things to fix). The filesystem must
* be mounted read-only.
*
* Things to do to update the mount:
* 1) invalidate all cached meta-data.
* 2) re-read superblock from disk.
* 3) re-read summary information from disk.
* 4) invalidate all inactive vnodes.
* 5) invalidate all cached file data.
* 6) re-read inode data for all active vnodes.
*/
Initial commit of IFS - a inode-namespaced FFS. Here is a short description: How it works: -- Basically ifs is a copy of ffs, overriding some vfs/vnops. (Yes, hack.) I didn't see the need in duplicating all of sys/ufs/ffs to get this off the ground. File creation is done through a special file - 'newfile' . When newfile is called, the system allocates and returns an inode. Note that newfile is done in a cloning fashion: fd = open("newfile", O_CREAT|O_RDWR, 0644); fstat(fd, &st); printf("new file is %d\n", (int)st.st_ino); Once you have created a file, you can open() and unlink() it by its returned inode number retrieved from the stat call, ie: fd = open("5", O_RDWR); The creation permissions depend entirely if you have write access to the root directory of the filesystem. To get the list of currently allocated inodes, VOP_READDIR has been added which returns a directory listing of those currently allocated. -- What this entails: * patching conf/files and conf/options to include IFS as a new compile option (and since ifs depends upon FFS, include the FFS routines) * An entry in i386/conf/NOTES indicating IFS exists and where to go for an explanation * Unstaticize a couple of routines in src/sys/ufs/ffs/ which the IFS routines require (ffs_mount() and ffs_reload()) * a new bunch of routines in src/sys/ufs/ifs/ which implement the IFS routines. IFS replaces some of the vfsops, and a handful of vnops - most notably are VFS_VGET(), VOP_LOOKUP(), VOP_UNLINK() and VOP_READDIR(). Any other directory operation is marked as invalid. What this results in: * an IFS partition's create permissions are controlled by the perm/ownership of the root mount point, just like a normal directory * Each inode has perm and ownership too * IFS does *NOT* mean an FFS partition can be opened per inode. This is a completely seperate filesystem here * Softupdates doesn't work with IFS, and really I don't think it needs it. Besides, fsck's are FAST. (Try it :-) * Inodes 0 and 1 aren't allocatable because they are special (dump/swap IIRC). Inode 2 isn't allocatable since UFS/FFS locks all inodes in the system against this particular inode, and unravelling THAT code isn't trivial. Therefore, useful inodes start at 3. Enjoy, and feedback is definitely appreciated!
2000-10-14 03:02:30 +00:00
int
ffs_reload(mp, cred, td)
struct mount *mp;
1994-05-24 10:09:53 +00:00
struct ucred *cred;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct vnode *vp, *nvp, *devvp;
1994-05-24 10:09:53 +00:00
struct inode *ip;
void *space;
1994-05-24 10:09:53 +00:00
struct buf *bp;
struct fs *fs, *newfs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t sblockloc;
1994-05-24 10:09:53 +00:00
int i, blks, size, error;
int32_t *lp;
1994-05-24 10:09:53 +00:00
if ((mp->mnt_flag & MNT_RDONLY) == 0)
1994-05-24 10:09:53 +00:00
return (EINVAL);
/*
* Step 1: invalidate all cached meta-data.
*/
devvp = VFSTOUFS(mp)->um_devvp;
vn_lock(devvp, LK_EXCLUSIVE | LK_RETRY, td);
if (vinvalbuf(devvp, 0, cred, td, 0, 0) != 0)
1994-05-24 10:09:53 +00:00
panic("ffs_reload: dirty1");
/*
* Only VMIO the backing device if the backing device is a real
* disk device. See ffs_mountfs() for more details.
*/
if (vn_isdisk(devvp, NULL))
vfs_object_create(devvp, td, td->td_ucred);
VOP_UNLOCK(devvp, 0, td);
1994-05-24 10:09:53 +00:00
/*
* Step 2: re-read superblock from disk.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs = VFSTOUFS(mp)->um_fs;
if ((error = bread(devvp, btodb(fs->fs_sblockloc), fs->fs_sbsize,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
NOCRED, &bp)) != 0)
1994-05-24 10:09:53 +00:00
return (error);
newfs = (struct fs *)bp->b_data;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((newfs->fs_magic != FS_UFS1_MAGIC &&
newfs->fs_magic != FS_UFS2_MAGIC) ||
newfs->fs_bsize > MAXBSIZE ||
newfs->fs_bsize < sizeof(struct fs)) {
brelse(bp);
return (EIO); /* XXX needs translation */
1994-05-24 10:09:53 +00:00
}
/*
* Copy pointer fields back into superblock before copying in XXX
* new superblock. These should really be in the ufsmount. XXX
* Note that important parameters (eg fs_ncg) are unchanged.
*/
newfs->fs_csp = fs->fs_csp;
newfs->fs_maxcluster = fs->fs_maxcluster;
newfs->fs_contigdirs = fs->fs_contigdirs;
newfs->fs_active = fs->fs_active;
/* The file system is still read-only. */
newfs->fs_ronly = 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
sblockloc = fs->fs_sblockloc;
bcopy(newfs, fs, (u_int)fs->fs_sbsize);
1994-05-24 10:09:53 +00:00
brelse(bp);
mp->mnt_maxsymlinklen = fs->fs_maxsymlinklen;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ffs_oldfscompat_read(fs, VFSTOUFS(mp), sblockloc);
if (fs->fs_pendingblocks != 0 || fs->fs_pendinginodes != 0) {
printf("%s: reload pending error: blocks %jd files %d\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_fsmnt, (intmax_t)fs->fs_pendingblocks,
fs->fs_pendinginodes);
fs->fs_pendingblocks = 0;
fs->fs_pendinginodes = 0;
}
1994-05-24 10:09:53 +00:00
/*
* Step 3: re-read summary information from disk.
*/
blks = howmany(fs->fs_cssize, fs->fs_fsize);
space = fs->fs_csp;
1994-05-24 10:09:53 +00:00
for (i = 0; i < blks; i += fs->fs_frag) {
size = fs->fs_bsize;
if (i + fs->fs_frag > blks)
size = (blks - i) * fs->fs_fsize;
error = bread(devvp, fsbtodb(fs, fs->fs_csaddr + i), size,
NOCRED, &bp);
if (error)
1994-05-24 10:09:53 +00:00
return (error);
bcopy(bp->b_data, space, (u_int)size);
space = (char *)space + size;
1994-05-24 10:09:53 +00:00
brelse(bp);
}
/*
* We no longer know anything about clusters per cylinder group.
*/
if (fs->fs_contigsumsize > 0) {
lp = fs->fs_maxcluster;
for (i = 0; i < fs->fs_ncg; i++)
*lp++ = fs->fs_contigsumsize;
}
1994-05-24 10:09:53 +00:00
loop:
MNT_ILOCK(mp);
for (vp = TAILQ_FIRST(&mp->mnt_nvnodelist); vp != NULL; vp = nvp) {
if (vp->v_mount != mp) {
MNT_IUNLOCK(mp);
goto loop;
}
nvp = TAILQ_NEXT(vp, v_nmntvnodes);
VI_LOCK(vp);
if (vp->v_iflag & VI_XLOCK) {
VI_UNLOCK(vp);
continue;
}
MNT_IUNLOCK(mp);
1994-05-24 10:09:53 +00:00
/*
* Step 4: invalidate all inactive vnodes.
*/
if (vp->v_usecount == 0) {
vgonel(vp, td);
goto loop;
}
1994-05-24 10:09:53 +00:00
/*
* Step 5: invalidate all cached file data.
*/
if (vget(vp, LK_EXCLUSIVE | LK_INTERLOCK, td)) {
1994-05-24 10:09:53 +00:00
goto loop;
}
if (vinvalbuf(vp, 0, cred, td, 0, 0))
1994-05-24 10:09:53 +00:00
panic("ffs_reload: dirty2");
/*
* Step 6: re-read inode data for all active vnodes.
*/
ip = VTOI(vp);
error =
1994-05-24 10:09:53 +00:00
bread(devvp, fsbtodb(fs, ino_to_fsba(fs, ip->i_number)),
(int)fs->fs_bsize, NOCRED, &bp);
if (error) {
VOP_UNLOCK(vp, 0, td);
vrele(vp);
1994-05-24 10:09:53 +00:00
return (error);
}
ffs_load_inode(bp, ip, fs, ip->i_number);
ip->i_effnlink = ip->i_nlink;
1994-05-24 10:09:53 +00:00
brelse(bp);
VOP_UNLOCK(vp, 0, td);
vrele(vp);
MNT_ILOCK(mp);
1994-05-24 10:09:53 +00:00
}
MNT_IUNLOCK(mp);
1994-05-24 10:09:53 +00:00
return (0);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* Possible superblock locations ordered from most to least likely.
*/
static int sblock_try[] = SBLOCKSEARCH;
1994-05-24 10:09:53 +00:00
/*
* Common code for mount and mountroot
*/
static int
ffs_mountfs(devvp, mp, td)
struct vnode *devvp;
1994-05-24 10:09:53 +00:00
struct mount *mp;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct ufsmount *ump;
1994-05-24 10:09:53 +00:00
struct buf *bp;
struct fs *fs;
struct cdev *dev;
void *space;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t sblockloc;
int error, i, blks, size, ronly;
int32_t *lp;
struct ucred *cred;
1998-06-04 17:21:39 +00:00
size_t strsize;
1994-05-24 10:09:53 +00:00
dev = devvp->v_rdev;
cred = td ? td->td_ucred : NOCRED;
1994-05-24 10:09:53 +00:00
/*
* Disallow multiple mounts of the same device.
* Disallow mounting of a device that is currently in use
* (except for root, which might share swap device for miniroot).
* Flush out any old buffers remaining from a previous use.
*/
error = vfs_mountedon(devvp);
if (error)
1994-05-24 10:09:53 +00:00
return (error);
if (vcount(devvp) > 1 && devvp != rootvp)
1994-05-24 10:09:53 +00:00
return (EBUSY);
vn_lock(devvp, LK_EXCLUSIVE | LK_RETRY, td);
error = vinvalbuf(devvp, V_SAVE, cred, td, 0, 0);
if (error) {
VOP_UNLOCK(devvp, 0, td);
1994-05-24 10:09:53 +00:00
return (error);
}
1994-05-24 10:09:53 +00:00
/*
* Only VMIO the backing device if the backing device is a real
* disk device.
* Note that it is optional that the backing device be VMIOed. This
* increases the opportunity for metadata caching.
*/
if (vn_isdisk(devvp, NULL))
vfs_object_create(devvp, td, cred);
1994-05-24 10:09:53 +00:00
ronly = (mp->mnt_flag & MNT_RDONLY) != 0;
/*
* XXX: open the device with read and write access even if only
* read access is needed now. Write access is needed if the
* filesystem is ever mounted read/write, and we don't change the
* access mode for remounts.
*/
#ifdef notyet
error = VOP_OPEN(devvp, ronly ? FREAD : FREAD | FWRITE, FSCRED, td, -1);
#else
error = VOP_OPEN(devvp, FREAD | FWRITE, FSCRED, td, -1);
#endif
VOP_UNLOCK(devvp, 0, td);
if (error)
1994-05-24 10:09:53 +00:00
return (error);
if (devvp->v_rdev->si_iosize_max != 0)
mp->mnt_iosize_max = devvp->v_rdev->si_iosize_max;
if (mp->mnt_iosize_max > MAXPHYS)
mp->mnt_iosize_max = MAXPHYS;
1994-05-24 10:09:53 +00:00
bp = NULL;
ump = NULL;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs = NULL;
sblockloc = 0;
/*
* Try reading the superblock in each of its possible locations.
*/
for (i = 0; sblock_try[i] != -1; i++) {
if ((error = bread(devvp, sblock_try[i] / DEV_BSIZE, SBLOCKSIZE,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cred, &bp)) != 0)
goto out;
fs = (struct fs *)bp->b_data;
sblockloc = sblock_try[i];
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((fs->fs_magic == FS_UFS1_MAGIC ||
(fs->fs_magic == FS_UFS2_MAGIC &&
(fs->fs_sblockloc == sblockloc ||
(fs->fs_old_flags & FS_FLAGS_UPDATED) == 0))) &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_bsize <= MAXBSIZE &&
fs->fs_bsize >= sizeof(struct fs))
break;
brelse(bp);
bp = NULL;
}
if (sblock_try[i] == -1) {
1994-05-24 10:09:53 +00:00
error = EINVAL; /* XXX needs translation */
goto out;
}
fs->fs_fmod = 0;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_flags &= ~FS_INDEXDIRS; /* no support for directory indicies */
fs->fs_flags &= ~FS_UNCLEAN;
if (fs->fs_clean == 0) {
fs->fs_flags |= FS_UNCLEAN;
if (ronly || (mp->mnt_flag & MNT_FORCE) ||
((fs->fs_flags & FS_NEEDSFSCK) == 0 &&
(fs->fs_flags & FS_DOSOFTDEP))) {
printf(
"WARNING: %s was not properly dismounted\n",
fs->fs_fsmnt);
} else {
printf(
"WARNING: R/W mount of %s denied. Filesystem is not clean - run fsck\n",
fs->fs_fsmnt);
error = EPERM;
goto out;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((fs->fs_pendingblocks != 0 || fs->fs_pendinginodes != 0) &&
(mp->mnt_flag & MNT_FORCE)) {
printf("%s: lost blocks %jd files %d\n", fs->fs_fsmnt,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)fs->fs_pendingblocks,
fs->fs_pendinginodes);
fs->fs_pendingblocks = 0;
fs->fs_pendinginodes = 0;
}
}
if (fs->fs_pendingblocks != 0 || fs->fs_pendinginodes != 0) {
printf("%s: mount pending error: blocks %jd files %d\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_fsmnt, (intmax_t)fs->fs_pendingblocks,
fs->fs_pendinginodes);
fs->fs_pendingblocks = 0;
fs->fs_pendinginodes = 0;
}
ump = malloc(sizeof *ump, M_UFSMNT, M_WAITOK | M_ZERO);
1994-05-24 10:09:53 +00:00
ump->um_fs = malloc((u_long)fs->fs_sbsize, M_UFSMNT,
M_WAITOK);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS1_MAGIC) {
ump->um_fstype = UFS1;
ump->um_balloc = ffs_balloc_ufs1;
} else {
ump->um_fstype = UFS2;
ump->um_balloc = ffs_balloc_ufs2;
}
ump->um_blkatoff = ffs_blkatoff;
ump->um_truncate = ffs_truncate;
ump->um_update = ffs_update;
ump->um_valloc = ffs_valloc;
ump->um_vfree = ffs_vfree;
ump->um_ifree = ffs_ifree;
1994-05-24 10:09:53 +00:00
bcopy(bp->b_data, ump->um_fs, (u_int)fs->fs_sbsize);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_sbsize < SBLOCKSIZE)
bp->b_flags |= B_INVAL | B_NOCACHE;
1994-05-24 10:09:53 +00:00
brelse(bp);
bp = NULL;
fs = ump->um_fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ffs_oldfscompat_read(fs, ump, sblockloc);
1994-05-24 10:09:53 +00:00
fs->fs_ronly = ronly;
size = fs->fs_cssize;
blks = howmany(size, fs->fs_fsize);
if (fs->fs_contigsumsize > 0)
size += fs->fs_ncg * sizeof(int32_t);
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
size += fs->fs_ncg * sizeof(u_int8_t);
space = malloc((u_long)size, M_UFSMNT, M_WAITOK);
fs->fs_csp = space;
1994-05-24 10:09:53 +00:00
for (i = 0; i < blks; i += fs->fs_frag) {
size = fs->fs_bsize;
if (i + fs->fs_frag > blks)
size = (blks - i) * fs->fs_fsize;
if ((error = bread(devvp, fsbtodb(fs, fs->fs_csaddr + i), size,
cred, &bp)) != 0) {
free(fs->fs_csp, M_UFSMNT);
1994-05-24 10:09:53 +00:00
goto out;
}
bcopy(bp->b_data, space, (u_int)size);
space = (char *)space + size;
1994-05-24 10:09:53 +00:00
brelse(bp);
bp = NULL;
}
if (fs->fs_contigsumsize > 0) {
fs->fs_maxcluster = lp = space;
for (i = 0; i < fs->fs_ncg; i++)
*lp++ = fs->fs_contigsumsize;
space = lp;
}
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
size = fs->fs_ncg * sizeof(u_int8_t);
fs->fs_contigdirs = (u_int8_t *)space;
bzero(fs->fs_contigdirs, size);
fs->fs_active = NULL;
1994-05-24 10:09:53 +00:00
mp->mnt_data = (qaddr_t)ump;
mp->mnt_stat.f_fsid.val[0] = fs->fs_id[0];
mp->mnt_stat.f_fsid.val[1] = fs->fs_id[1];
if (fs->fs_id[0] == 0 || fs->fs_id[1] == 0 ||
vfs_getvfs(&mp->mnt_stat.f_fsid))
vfs_getnewfsid(mp);
1994-05-24 10:09:53 +00:00
mp->mnt_maxsymlinklen = fs->fs_maxsymlinklen;
mp->mnt_flag |= MNT_LOCAL;
if ((fs->fs_flags & FS_MULTILABEL) != 0)
#ifdef MAC
mp->mnt_flag |= MNT_MULTILABEL;
#else
printf(
"WARNING: %s: multilabel flag on fs but no MAC support\n",
fs->fs_fsmnt);
#endif
if ((fs->fs_flags & FS_ACLS) != 0)
#ifdef UFS_ACL
mp->mnt_flag |= MNT_ACLS;
#else
printf(
"WARNING: %s: ACLs flag on fs but no ACLs support\n",
fs->fs_fsmnt);
#endif
1994-05-24 10:09:53 +00:00
ump->um_mountp = mp;
ump->um_dev = dev;
ump->um_devvp = devvp;
ump->um_nindir = fs->fs_nindir;
ump->um_bptrtodb = fs->fs_fsbtodb;
ump->um_seqinc = fs->fs_frag;
for (i = 0; i < MAXQUOTAS; i++)
ump->um_quotas[i] = NULLVP;
#ifdef UFS_EXTATTR
ufs_extattr_uepm_init(&ump->um_extattr);
#endif
devvp->v_rdev->si_mountpoint = mp;
/*
* Set FS local "last mounted on" information (NULL pad)
*/
copystr( mp->mnt_stat.f_mntonname, /* mount point*/
fs->fs_fsmnt, /* copy area*/
sizeof(fs->fs_fsmnt) - 1, /* max size*/
&strsize); /* real size*/
bzero( fs->fs_fsmnt + strsize, sizeof(fs->fs_fsmnt) - strsize);
if( mp->mnt_flag & MNT_ROOTFS) {
/*
* Root mount; update timestamp in mount structure.
* this will be used by the common root mount code
* to update the system clock.
*/
mp->mnt_time = fs->fs_time;
}
if (ronly == 0) {
if ((fs->fs_flags & FS_DOSOFTDEP) &&
(error = softdep_mount(devvp, mp, fs, cred)) != 0) {
free(fs->fs_csp, M_UFSMNT);
goto out;
}
if (fs->fs_snapinum[0] != 0)
ffs_snapshot_mount(mp);
fs->fs_fmod = 1;
fs->fs_clean = 0;
(void) ffs_sbupdate(ump, MNT_WAIT);
}
#ifdef UFS_EXTATTR
#ifdef UFS_EXTATTR_AUTOSTART
/*
*
o Implement "options FFS_EXTATTR_AUTOSTART", which depends on "options FFS_EXTATTR". When extended attribute auto-starting is enabled, FFS will scan the .attribute directory off of the root of each file system, as it is mounted. If .attribute exists, EA support will be started for the file system. If there are files in the directory, FFS will attempt to start them as attribute backing files for attributes baring the same name. All attributes are started before access to the file system is permitted, so this permits race-free enabling of attributes. For attributes backing support for security features, such as ACLs, MAC, Capabilities, this is vital, as it prevents the file system attributes from getting out of sync as a result of file system operations between mount-time and the enabling of the extended attribute. The userland extattrctl tool will still function exactly as previously. Files must be placed directly in .attribute, which must be directly off of the file system root: symbolic links are not permitted. FFS_EXTATTR will continue to be able to function without FFS_EXTATTR_AUTOSTART for sites that do not want/require auto-starting. If you're using the UFS_ACL code available from www.TrustedBSD.org, using FFS_EXTATTR_AUTOSTART is recommended. o This support is implemented by adding an invocation of ufs_extattr_autostart() to ffs_mountfs(). In addition, several new supporting calls are introduced in ufs_extattr.c: ufs_extattr_autostart(): start EAs on the specified mount ufs_extattr_lookup(): given a directory and filename, return the vnode for the file. ufs_extattr_enable_with_open(): invoke ufs_extattr_enable() after doing the equililent of vn_open() on the passed file. ufs_extattr_iterate_directory(): iterate over a directory, invoking ufs_extattr_lookup() and ufs_extattr_enable_with_open() on each entry. o This feature is not widely tested, and therefore may contain bugs, caution is advised. Several changes are in the pipeline for this feature, including breaking out of EA namespaces into subdirectories of .attribute (this is waiting on the updated EA API), as well as a per-filesystem flag indicating whether or not EAs should be auto-started. This is required because administrators may not want .attribute auto-started on all file systems, especially if non-administrators have write access to the root of a file system. Obtained from: TrustedBSD Project
2001-03-14 05:32:31 +00:00
* Auto-starting does the following:
* - check for /.attribute in the fs, and extattr_start if so
* - for each file in .attribute, enable that file with
* an attribute of the same name.
* Not clear how to report errors -- probably eat them.
2002-05-16 21:28:32 +00:00
* This would all happen while the filesystem was busy/not
* available, so would effectively be "atomic".
*/
(void) ufs_extattr_autostart(mp, td);
#endif /* !UFS_EXTATTR_AUTOSTART */
#endif /* !UFS_EXTATTR */
1994-05-24 10:09:53 +00:00
return (0);
out:
devvp->v_rdev->si_mountpoint = NULL;
1994-05-24 10:09:53 +00:00
if (bp)
brelse(bp);
/* XXX: see comment above VOP_OPEN. */
#ifdef notyet
(void)VOP_CLOSE(devvp, ronly ? FREAD : FREAD | FWRITE, cred, td);
#else
(void)VOP_CLOSE(devvp, FREAD | FWRITE, cred, td);
#endif
1994-05-24 10:09:53 +00:00
if (ump) {
free(ump->um_fs, M_UFSMNT);
free(ump, M_UFSMNT);
mp->mnt_data = (qaddr_t)0;
}
return (error);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
#include <sys/sysctl.h>
int bigcgs = 0;
SYSCTL_INT(_debug, OID_AUTO, bigcgs, CTLFLAG_RW, &bigcgs, 0, "");
1994-05-24 10:09:53 +00:00
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* Sanity checks for loading old filesystem superblocks.
* See ffs_oldfscompat_write below for unwound actions.
1994-05-24 10:09:53 +00:00
*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* XXX - Parts get retired eventually.
* Unfortunately new bits get added.
1994-05-24 10:09:53 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static void
ffs_oldfscompat_read(fs, ump, sblockloc)
1994-05-24 10:09:53 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct ufsmount *ump;
ufs2_daddr_t sblockloc;
1994-05-24 10:09:53 +00:00
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
off_t maxfilesize;
1994-05-24 10:09:53 +00:00
/*
* If not yet done, update fs_flags location and value of fs_sblockloc.
*/
if ((fs->fs_old_flags & FS_FLAGS_UPDATED) == 0) {
fs->fs_flags = fs->fs_old_flags;
fs->fs_old_flags |= FS_FLAGS_UPDATED;
fs->fs_sblockloc = sblockloc;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* If not yet done, update UFS1 superblock with new wider fields.
*/
if (fs->fs_magic == FS_UFS1_MAGIC && fs->fs_maxbsize != fs->fs_bsize) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_maxbsize = fs->fs_bsize;
fs->fs_time = fs->fs_old_time;
fs->fs_size = fs->fs_old_size;
fs->fs_dsize = fs->fs_old_dsize;
fs->fs_csaddr = fs->fs_old_csaddr;
fs->fs_cstotal.cs_ndir = fs->fs_old_cstotal.cs_ndir;
fs->fs_cstotal.cs_nbfree = fs->fs_old_cstotal.cs_nbfree;
fs->fs_cstotal.cs_nifree = fs->fs_old_cstotal.cs_nifree;
fs->fs_cstotal.cs_nffree = fs->fs_old_cstotal.cs_nffree;
}
if (fs->fs_magic == FS_UFS1_MAGIC &&
fs->fs_old_inodefmt < FS_44INODEFMT) {
fs->fs_maxfilesize = (u_quad_t) 1LL << 39;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_qbmask = ~fs->fs_bmask;
fs->fs_qfmask = ~fs->fs_fmask;
}
if (fs->fs_magic == FS_UFS1_MAGIC) {
ump->um_savedmaxfilesize = fs->fs_maxfilesize;
maxfilesize = (u_int64_t)0x40000000 * fs->fs_bsize - 1;
if (fs->fs_maxfilesize > maxfilesize)
fs->fs_maxfilesize = maxfilesize;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/* Compatibility for old filesystems */
if (fs->fs_avgfilesize <= 0)
fs->fs_avgfilesize = AVFILESIZ;
if (fs->fs_avgfpdir <= 0)
fs->fs_avgfpdir = AFPDIR;
if (bigcgs) {
fs->fs_save_cgsize = fs->fs_cgsize;
fs->fs_cgsize = fs->fs_bsize;
}
}
/*
* Unwinding superblock updates for old filesystems.
* See ffs_oldfscompat_read above for details.
*
* XXX - Parts get retired eventually.
* Unfortunately new bits get added.
*/
static void
ffs_oldfscompat_write(fs, ump)
struct fs *fs;
struct ufsmount *ump;
{
/*
* Copy back UFS2 updated fields that UFS1 inspects.
*/
if (fs->fs_magic == FS_UFS1_MAGIC) {
fs->fs_old_time = fs->fs_time;
fs->fs_old_cstotal.cs_ndir = fs->fs_cstotal.cs_ndir;
fs->fs_old_cstotal.cs_nbfree = fs->fs_cstotal.cs_nbfree;
fs->fs_old_cstotal.cs_nifree = fs->fs_cstotal.cs_nifree;
fs->fs_old_cstotal.cs_nffree = fs->fs_cstotal.cs_nffree;
fs->fs_maxfilesize = ump->um_savedmaxfilesize;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
if (bigcgs) {
fs->fs_cgsize = fs->fs_save_cgsize;
fs->fs_save_cgsize = 0;
}
1994-05-24 10:09:53 +00:00
}
/*
* unmount system call
*/
int
ffs_unmount(mp, mntflags, td)
1994-05-24 10:09:53 +00:00
struct mount *mp;
int mntflags;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct ufsmount *ump = VFSTOUFS(mp);
struct fs *fs;
int error, flags;
1994-05-24 10:09:53 +00:00
flags = 0;
if (mntflags & MNT_FORCE) {
flags |= FORCECLOSE;
}
#ifdef UFS_EXTATTR
if ((error = ufs_extattr_stop(mp, td))) {
if (error != EOPNOTSUPP)
printf("ffs_unmount: ufs_extattr_stop returned %d\n",
error);
} else {
ufs_extattr_uepm_destroy(&ump->um_extattr);
}
#endif
if (mp->mnt_flag & MNT_SOFTDEP) {
if ((error = softdep_flushfiles(mp, flags, td)) != 0)
return (error);
} else {
if ((error = ffs_flushfiles(mp, flags, td)) != 0)
return (error);
}
1994-05-24 10:09:53 +00:00
fs = ump->um_fs;
if (fs->fs_pendingblocks != 0 || fs->fs_pendinginodes != 0) {
printf("%s: unmount pending error: blocks %jd files %d\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_fsmnt, (intmax_t)fs->fs_pendingblocks,
fs->fs_pendinginodes);
fs->fs_pendingblocks = 0;
fs->fs_pendinginodes = 0;
}
if (fs->fs_ronly == 0) {
fs->fs_clean = fs->fs_flags & (FS_UNCLEAN|FS_NEEDSFSCK) ? 0 : 1;
error = ffs_sbupdate(ump, MNT_WAIT);
if (error) {
fs->fs_clean = 0;
return (error);
}
}
ump->um_devvp->v_rdev->si_mountpoint = NULL;
vinvalbuf(ump->um_devvp, V_SAVE, NOCRED, td, 0, 0);
/* XXX: see comment above VOP_OPEN. */
#ifdef notyet
error = VOP_CLOSE(ump->um_devvp, fs->fs_ronly ? FREAD : FREAD | FWRITE,
NOCRED, td);
#else
error = VOP_CLOSE(ump->um_devvp, FREAD | FWRITE, NOCRED, td);
#endif
vrele(ump->um_devvp);
free(fs->fs_csp, M_UFSMNT);
1994-05-24 10:09:53 +00:00
free(fs, M_UFSMNT);
free(ump, M_UFSMNT);
mp->mnt_data = (qaddr_t)0;
mp->mnt_flag &= ~MNT_LOCAL;
1994-05-24 10:09:53 +00:00
return (error);
}
/*
* Flush out all the files in a filesystem.
*/
int
ffs_flushfiles(mp, flags, td)
struct mount *mp;
1994-05-24 10:09:53 +00:00
int flags;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct ufsmount *ump;
int error;
1994-05-24 10:09:53 +00:00
ump = VFSTOUFS(mp);
#ifdef QUOTA
if (mp->mnt_flag & MNT_QUOTA) {
int i;
error = vflush(mp, 0, SKIPSYSTEM|flags);
if (error)
1994-05-24 10:09:53 +00:00
return (error);
for (i = 0; i < MAXQUOTAS; i++) {
if (ump->um_quotas[i] == NULLVP)
continue;
quotaoff(td, mp, i);
1994-05-24 10:09:53 +00:00
}
/*
* Here we fall through to vflush again to ensure
* that we have gotten rid of all the system vnodes.
*/
}
#endif
ASSERT_VOP_LOCKED(ump->um_devvp, "ffs_flushfiles");
if (ump->um_devvp->v_vflag & VV_COPYONWRITE) {
if ((error = vflush(mp, 0, SKIPSYSTEM | flags)) != 0)
return (error);
ffs_snapshot_unmount(mp);
/*
* Here we fall through to vflush again to ensure
* that we have gotten rid of all the system vnodes.
*/
}
/*
* Flush all the files.
*/
if ((error = vflush(mp, 0, flags)) != 0)
return (error);
/*
* Flush filesystem metadata.
*/
vn_lock(ump->um_devvp, LK_EXCLUSIVE | LK_RETRY, td);
error = VOP_FSYNC(ump->um_devvp, td->td_ucred, MNT_WAIT, td);
VOP_UNLOCK(ump->um_devvp, 0, td);
1994-05-24 10:09:53 +00:00
return (error);
}
/*
2002-05-16 21:28:32 +00:00
* Get filesystem statistics.
1994-05-24 10:09:53 +00:00
*/
int
ffs_statfs(mp, sbp, td)
1994-05-24 10:09:53 +00:00
struct mount *mp;
struct statfs *sbp;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct ufsmount *ump;
struct fs *fs;
1994-05-24 10:09:53 +00:00
ump = VFSTOUFS(mp);
fs = ump->um_fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic != FS_UFS1_MAGIC && fs->fs_magic != FS_UFS2_MAGIC)
1994-05-24 10:09:53 +00:00
panic("ffs_statfs");
sbp->f_version = STATFS_VERSION;
1994-05-24 10:09:53 +00:00
sbp->f_bsize = fs->fs_fsize;
sbp->f_iosize = fs->fs_bsize;
sbp->f_blocks = fs->fs_dsize;
sbp->f_bfree = fs->fs_cstotal.cs_nbfree * fs->fs_frag +
fs->fs_cstotal.cs_nffree + dbtofsb(fs, fs->fs_pendingblocks);
sbp->f_bavail = freespace(fs, fs->fs_minfree) +
dbtofsb(fs, fs->fs_pendingblocks);
1994-05-24 10:09:53 +00:00
sbp->f_files = fs->fs_ncg * fs->fs_ipg - ROOTINO;
sbp->f_ffree = fs->fs_cstotal.cs_nifree + fs->fs_pendinginodes;
sbp->f_namemax = NAME_MAX;
1994-05-24 10:09:53 +00:00
if (sbp != &mp->mnt_stat) {
sbp->f_flags = mp->mnt_flag & MNT_VISFLAGMASK;
sbp->f_type = mp->mnt_vfc->vfc_typenum;
sbp->f_syncwrites = mp->mnt_stat.f_syncwrites;
sbp->f_asyncwrites = mp->mnt_stat.f_asyncwrites;
sbp->f_syncreads = mp->mnt_stat.f_syncreads;
sbp->f_asyncreads = mp->mnt_stat.f_asyncreads;
sbp->f_owner = mp->mnt_stat.f_owner;
sbp->f_fsid = mp->mnt_stat.f_fsid;
bcopy((caddr_t)mp->mnt_stat.f_fstypename,
(caddr_t)&sbp->f_fstypename[0], MFSNAMELEN);
1994-05-24 10:09:53 +00:00
bcopy((caddr_t)mp->mnt_stat.f_mntonname,
(caddr_t)&sbp->f_mntonname[0], MNAMELEN);
bcopy((caddr_t)mp->mnt_stat.f_mntfromname,
(caddr_t)&sbp->f_mntfromname[0], MNAMELEN);
}
return (0);
}
/*
* Go through the disk queues to initiate sandbagged IO;
* go through the inodes to write those that have been modified;
* initiate the writing of the super block if it has been modified.
*
* Note: we are always called with the filesystem marked `MPBUSY'.
*/
int
ffs_sync(mp, waitfor, cred, td)
1994-05-24 10:09:53 +00:00
struct mount *mp;
int waitfor;
struct ucred *cred;
struct thread *td;
1994-05-24 10:09:53 +00:00
{
struct vnode *nvp, *vp, *devvp;
struct inode *ip;
struct ufsmount *ump = VFSTOUFS(mp);
struct fs *fs;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
int error, count, wait, lockreq, allerror = 0;
1994-05-24 10:09:53 +00:00
fs = ump->um_fs;
if (fs->fs_fmod != 0 && fs->fs_ronly != 0) { /* XXX */
printf("fs = %s\n", fs->fs_fsmnt);
panic("ffs_sync: rofs mod");
1994-05-24 10:09:53 +00:00
}
/*
* Write back each (modified) inode.
*/
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
wait = 0;
lockreq = LK_EXCLUSIVE | LK_NOWAIT;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
if (waitfor == MNT_WAIT) {
wait = 1;
lockreq = LK_EXCLUSIVE;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
}
lockreq |= LK_INTERLOCK;
MNT_ILOCK(mp);
1994-05-24 10:09:53 +00:00
loop:
for (vp = TAILQ_FIRST(&mp->mnt_nvnodelist); vp != NULL; vp = nvp) {
1994-05-24 10:09:53 +00:00
/*
* If the vnode that we are about to sync is no longer
* associated with this mount point, start over.
*/
if (vp->v_mount != mp)
goto loop;
/*
* Depend on the mntvnode_slock to keep things stable enough
* for a quick test. Since there might be hundreds of
* thousands of vnodes, we cannot afford even a subroutine
* call unless there's a good chance that we have work to do.
*/
nvp = TAILQ_NEXT(vp, v_nmntvnodes);
VI_LOCK(vp);
if (vp->v_iflag & VI_XLOCK) {
VI_UNLOCK(vp);
continue;
}
1994-05-24 10:09:53 +00:00
ip = VTOI(vp);
if (vp->v_type == VNON || ((ip->i_flag &
(IN_ACCESS | IN_CHANGE | IN_MODIFIED | IN_UPDATE)) == 0 &&
TAILQ_EMPTY(&vp->v_dirtyblkhd))) {
VI_UNLOCK(vp);
1994-05-24 10:09:53 +00:00
continue;
}
MNT_IUNLOCK(mp);
if ((error = vget(vp, lockreq, td)) != 0) {
MNT_ILOCK(mp);
if (error == ENOENT)
goto loop;
continue;
}
if ((error = VOP_FSYNC(vp, cred, waitfor, td)) != 0)
allerror = error;
VOP_UNLOCK(vp, 0, td);
vrele(vp);
MNT_ILOCK(mp);
if (TAILQ_NEXT(vp, v_nmntvnodes) != nvp)
goto loop;
1994-05-24 10:09:53 +00:00
}
MNT_IUNLOCK(mp);
1994-05-24 10:09:53 +00:00
/*
2002-05-16 21:28:32 +00:00
* Force stale filesystem control information to be flushed.
1994-05-24 10:09:53 +00:00
*/
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
if (waitfor == MNT_WAIT) {
if ((error = softdep_flushworklist(ump->um_mountp, &count, td)))
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
allerror = error;
/* Flushed work items may create new vnodes to clean */
if (allerror == 0 && count) {
MNT_ILOCK(mp);
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
goto loop;
}
}
#ifdef QUOTA
qsync(mp);
#endif
devvp = ump->um_devvp;
VI_LOCK(devvp);
if (waitfor != MNT_LAZY &&
(devvp->v_numoutput > 0 || TAILQ_FIRST(&devvp->v_dirtyblkhd))) {
vn_lock(devvp, LK_EXCLUSIVE | LK_RETRY | LK_INTERLOCK, td);
if ((error = VOP_FSYNC(devvp, cred, waitfor, td)) != 0)
allerror = error;
VOP_UNLOCK(devvp, 0, td);
if (allerror == 0 && waitfor == MNT_WAIT) {
MNT_ILOCK(mp);
goto loop;
}
} else
VI_UNLOCK(devvp);
/*
* Write back modified superblock.
*/
if (fs->fs_fmod != 0 && (error = ffs_sbupdate(ump, waitfor)) != 0)
allerror = error;
1994-05-24 10:09:53 +00:00
return (allerror);
}
int
ffs_vget(mp, ino, flags, vpp)
1994-05-24 10:09:53 +00:00
struct mount *mp;
ino_t ino;
int flags;
1994-05-24 10:09:53 +00:00
struct vnode **vpp;
{
struct thread *td = curthread; /* XXX */
struct fs *fs;
struct inode *ip;
1994-05-24 10:09:53 +00:00
struct ufsmount *ump;
struct buf *bp;
struct vnode *vp;
struct cdev *dev;
int error;
1994-05-24 10:09:53 +00:00
ump = VFSTOUFS(mp);
dev = ump->um_dev;
/*
* We do not lock vnode creation as it is believed to be too
* expensive for such rare case as simultaneous creation of vnode
* for same ino by different processes. We just allow them to race
* and check later to decide who wins. Let the race begin!
*/
if ((error = ufs_ihashget(dev, ino, flags, vpp)) != 0)
return (error);
if (*vpp != NULL)
1994-05-24 10:09:53 +00:00
return (0);
/*
* If this MALLOC() is performed after the getnewvnode()
* it might block, leaving a vnode with a NULL v_data to be
* found by ffs_sync() if a sync happens to fire right then,
* which will cause a panic because ffs_sync() blindly
* dereferences vp->v_data (as well it should).
*/
ip = uma_zalloc(uma_inode, M_WAITOK);
1994-05-24 10:09:53 +00:00
/* Allocate a new vnode/inode. */
error = getnewvnode("ufs", mp, ffs_vnodeop_p, &vp);
if (error) {
1994-05-24 10:09:53 +00:00
*vpp = NULL;
uma_zfree(uma_inode, ip);
1994-05-24 10:09:53 +00:00
return (error);
}
bzero((caddr_t)ip, sizeof(struct inode));
/*
* FFS supports recursive locking.
*/
vp->v_vnlock->lk_flags |= LK_CANRECURSE;
1994-05-24 10:09:53 +00:00
vp->v_data = ip;
ip->i_vnode = vp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ip->i_ump = ump;
1994-05-24 10:09:53 +00:00
ip->i_fs = fs = ump->um_fs;
ip->i_dev = dev;
ip->i_number = ino;
#ifdef QUOTA
{
int i;
for (i = 0; i < MAXQUOTAS; i++)
ip->i_dquot[i] = NODQUOT;
}
1994-05-24 10:09:53 +00:00
#endif
/*
* Exclusively lock the vnode before adding to hash. Note, that we
* must not release nor downgrade the lock (despite flags argument
* says) till it is fully initialized.
1994-05-24 10:09:53 +00:00
*/
lockmgr(vp->v_vnlock, LK_EXCLUSIVE, (struct mtx *)0, td);
1994-05-24 10:09:53 +00:00
/*
* Atomicaly (in terms of ufs_hash operations) check the hash for
* duplicate of vnode being created and add it to the hash. If a
* duplicate vnode was found, it will be vget()ed from hash for us.
*/
if ((error = ufs_ihashins(ip, flags, vpp)) != 0) {
vput(vp);
*vpp = NULL;
return (error);
}
/* We lost the race, then throw away our vnode and return existing */
if (*vpp != NULL) {
vput(vp);
return (0);
}
1994-05-24 10:09:53 +00:00
/* Read in the disk contents for the inode, copy into the inode. */
error = bread(ump->um_devvp, fsbtodb(fs, ino_to_fsba(fs, ino)),
(int)fs->fs_bsize, NOCRED, &bp);
if (error) {
1994-05-24 10:09:53 +00:00
/*
* The inode does not contain anything useful, so it would
* be misleading to leave it on its hash chain. With mode
* still zero, it will be unlinked and returned to the free
* list by vput().
*/
brelse(bp);
vput(vp);
1994-05-24 10:09:53 +00:00
*vpp = NULL;
return (error);
}
if (ip->i_ump->um_fstype == UFS1)
ip->i_din1 = uma_zalloc(uma_ufs1, M_WAITOK);
else
ip->i_din2 = uma_zalloc(uma_ufs2, M_WAITOK);
ffs_load_inode(bp, ip, fs, ino);
if (DOINGSOFTDEP(vp))
softdep_load_inodeblock(ip);
else
ip->i_effnlink = ip->i_nlink;
bqrelse(bp);
1994-05-24 10:09:53 +00:00
/*
* Initialize the vnode from the inode, check for aliases.
* Note that the underlying vnode may have changed.
*/
error = ufs_vinit(mp, ffs_specop_p, ffs_fifoop_p, &vp);
if (error) {
1994-05-24 10:09:53 +00:00
vput(vp);
*vpp = NULL;
return (error);
}
/*
* Finish inode initialization.
1994-05-24 10:09:53 +00:00
*/
VREF(ip->i_devvp);
/*
* Set up a generation number for this inode if it does not
* already have one. This should only happen on old filesystems.
*/
if (ip->i_gen == 0) {
ip->i_gen = arc4random() / 2 + 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((vp->v_mount->mnt_flag & MNT_RDONLY) == 0) {
1994-05-24 10:09:53 +00:00
ip->i_flag |= IN_MODIFIED;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
DIP(ip, i_gen) = ip->i_gen;
}
1994-05-24 10:09:53 +00:00
}
/*
* Ensure that uid and gid are correct. This is a temporary
* fix until fsck has been changed to do the update.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS1_MAGIC && /* XXX */
fs->fs_old_inodefmt < FS_44INODEFMT) { /* XXX */
ip->i_uid = ip->i_din1->di_ouid; /* XXX */
ip->i_gid = ip->i_din1->di_ogid; /* XXX */
1994-05-24 10:09:53 +00:00
} /* XXX */
#ifdef MAC
if ((mp->mnt_flag & MNT_MULTILABEL) && ip->i_mode) {
/*
* If this vnode is already allocated, and we're running
* multi-label, attempt to perform a label association
* from the extended attributes on the inode.
*/
error = mac_associate_vnode_extattr(mp, vp);
if (error) {
/* ufs_inactive will release ip->i_devvp ref. */
vput(vp);
*vpp = NULL;
return (error);
}
}
#endif
1994-05-24 10:09:53 +00:00
*vpp = vp;
return (0);
}
/*
* File handle to vnode
*
* Have to be really careful about stale file handles:
* - check that the inode number is valid
* - call ffs_vget() to get the locked inode
* - check for an unallocated inode (i_mode == 0)
* - check that the given client host has export rights and return
* those rights via. exflagsp and credanonp
*/
int
ffs_fhtovp(mp, fhp, vpp)
struct mount *mp;
1994-05-24 10:09:53 +00:00
struct fid *fhp;
struct vnode **vpp;
{
struct ufid *ufhp;
1994-05-24 10:09:53 +00:00
struct fs *fs;
ufhp = (struct ufid *)fhp;
fs = VFSTOUFS(mp)->um_fs;
if (ufhp->ufid_ino < ROOTINO ||
ufhp->ufid_ino >= fs->fs_ncg * fs->fs_ipg)
return (ESTALE);
return (ufs_fhtovp(mp, ufhp, vpp));
1994-05-24 10:09:53 +00:00
}
/*
* Vnode pointer to File handle
*/
/* ARGSUSED */
int
1994-05-24 10:09:53 +00:00
ffs_vptofh(vp, fhp)
struct vnode *vp;
struct fid *fhp;
{
struct inode *ip;
struct ufid *ufhp;
1994-05-24 10:09:53 +00:00
ip = VTOI(vp);
ufhp = (struct ufid *)fhp;
ufhp->ufid_len = sizeof(struct ufid);
ufhp->ufid_ino = ip->i_number;
ufhp->ufid_gen = ip->i_gen;
return (0);
}
/*
* Initialize the filesystem.
*/
static int
ffs_init(vfsp)
struct vfsconf *vfsp;
{
softdep_initialize();
return (ufs_init(vfsp));
}
/*
* Undo the work of ffs_init().
*/
static int
ffs_uninit(vfsp)
struct vfsconf *vfsp;
{
int ret;
ret = ufs_uninit(vfsp);
softdep_uninitialize();
return (ret);
}
1994-05-24 10:09:53 +00:00
/*
* Write a superblock and associated information back to disk.
*/
1995-12-17 21:14:36 +00:00
static int
1994-05-24 10:09:53 +00:00
ffs_sbupdate(mp, waitfor)
struct ufsmount *mp;
int waitfor;
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct fs *fs = mp->um_fs;
struct buf *bp;
1994-05-24 10:09:53 +00:00
int blks;
void *space;
int i, size, error, allerror = 0;
1994-05-24 10:09:53 +00:00
if (fs->fs_ronly == 1 &&
(mp->um_mountp->mnt_flag & (MNT_RDONLY | MNT_UPDATE)) !=
(MNT_RDONLY | MNT_UPDATE))
panic("ffs_sbupdate: write read-only filesystem");
/*
* First write back the summary information.
*/
1994-05-24 10:09:53 +00:00
blks = howmany(fs->fs_cssize, fs->fs_fsize);
space = fs->fs_csp;
1994-05-24 10:09:53 +00:00
for (i = 0; i < blks; i += fs->fs_frag) {
size = fs->fs_bsize;
if (i + fs->fs_frag > blks)
size = (blks - i) * fs->fs_fsize;
bp = getblk(mp->um_devvp, fsbtodb(fs, fs->fs_csaddr + i),
size, 0, 0, 0);
1994-05-24 10:09:53 +00:00
bcopy(space, bp->b_data, (u_int)size);
space = (char *)space + size;
if (waitfor != MNT_WAIT)
1994-05-24 10:09:53 +00:00
bawrite(bp);
else if ((error = bwrite(bp)) != 0)
allerror = error;
1994-05-24 10:09:53 +00:00
}
/*
* Now write back the superblock itself. If any errors occurred
* up to this point, then fail so that the superblock avoids
* being written out as clean.
*/
if (allerror)
return (allerror);
if (fs->fs_magic == FS_UFS1_MAGIC && fs->fs_sblockloc != SBLOCK_UFS1 &&
(fs->fs_flags & FS_FLAGS_UPDATED) == 0) {
printf("%s: correcting fs_sblockloc from %jd to %d\n",
fs->fs_fsmnt, fs->fs_sblockloc, SBLOCK_UFS1);
fs->fs_sblockloc = SBLOCK_UFS1;
}
if (fs->fs_magic == FS_UFS2_MAGIC && fs->fs_sblockloc != SBLOCK_UFS2 &&
(fs->fs_flags & FS_FLAGS_UPDATED) == 0) {
printf("%s: correcting fs_sblockloc from %jd to %d\n",
fs->fs_fsmnt, fs->fs_sblockloc, SBLOCK_UFS2);
fs->fs_sblockloc = SBLOCK_UFS2;
}
bp = getblk(mp->um_devvp, btodb(fs->fs_sblockloc), (int)fs->fs_sbsize,
0, 0, 0);
fs->fs_fmod = 0;
fs->fs_time = time_second;
bcopy((caddr_t)fs, bp->b_data, (u_int)fs->fs_sbsize);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ffs_oldfscompat_write((struct fs *)bp->b_data, mp);
if (waitfor != MNT_WAIT)
bawrite(bp);
else if ((error = bwrite(bp)) != 0)
allerror = error;
return (allerror);
1994-05-24 10:09:53 +00:00
}
static int
ffs_extattrctl(struct mount *mp, int cmd, struct vnode *filename_vp,
int attrnamespace, const char *attrname, struct thread *td)
{
#ifdef UFS_EXTATTR
return (ufs_extattrctl(mp, cmd, filename_vp, attrnamespace,
attrname, td));
#else
return (vfs_stdextattrctl(mp, cmd, filename_vp, attrnamespace,
attrname, td));
#endif
}
static void
ffs_ifree(struct ufsmount *ump, struct inode *ip)
{
if (ump->um_fstype == UFS1 && ip->i_din1 != NULL)
uma_zfree(uma_ufs1, ip->i_din1);
else if (ip->i_din2 != NULL)
uma_zfree(uma_ufs2, ip->i_din2);
uma_zfree(uma_inode, ip);
}