d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f7fdacf1fa
freebsd-nq/sys/modules/Makefile

495 lines
6.2 KiB
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
# oldcard -- specialized use for debugging only.
# owi -- totally unsupported for debugging only.
Honour appropriate no-crypto flags.
2000-07-07 09:38:01 +00:00
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
SUBDIR= ${_3dfx} \
${_aac} \
accf_data \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
accf_http \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_acpi} \
${_agp} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
aha \
Add ahb module for i386 and alpha (the onlt two platforms that have eisa bus)
2004-06-29 21:20:17 +00:00
${_ahb} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_aic} \
Hook the aic7xxx modules up. This requires some extra care since aicasm is a compiler tool and needs to be compiled by the host compiler. I've tested this in i386->sparc cross-build, 4.7->current upgrade, normal buildkernel target, and normal /sys/i386/compile/GENERIC configurations. Submitted by: ru
2002-11-03 23:48:14 +00:00
aic7xxx \
Make AIO a loadable module. Remove the explicit call to aio_proc_rundown() from exit1(), instead AIO will use at_exit(9). Add functions at_exec(9), rm_at_exec(9) which function nearly the same as at_exec(9) and rm_at_exec(9), these functions are called on behalf of modules at the time of execve(2) after the image activator has run. Use a modified version of tegge's suggestion via at_exec(9) to close an exploitable race in AIO. Fix SYSCALL_MODULE_HELPER such that it's archetecuterally neutral, the problem was that one had to pass it a paramater indicating the number of arguments which were actually the number of "int". Fix it by using an inline version of the AS macro against the syscall arguments. (AS should be available globally but we'll get to that later.) Add a primative system for dynamically adding kqueue ops, it's really not as sophisticated as it should be, but I'll discuss with jlemon when he's around.
2001-12-29 07:13:47 +00:00
aio \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_amd} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
amr \
an \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_aout} \
${_apm} \
${_ar} \
${_arcnet} \
Fixed the disordering from rev. 1.371.
2004-05-16 13:58:27 +00:00
${_arl} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_asr} \
hookup ath and ath_hal to the build
2003-06-28 06:18:37 +00:00
ath \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ath_hal} \
Update/new modules for net80211 and ath changes.
2004-12-08 17:38:38 +00:00
ath_rate_amrr \
SampleRate rate control algorithm for the ath driver Submitted by: John Bicket
2005-03-11 01:39:57 +00:00
ath_rate_sample \
reorder ath_rate_onoe to after ath_rate_sample so it gets used as the default rate control algorithm; this should be done differently but for now use this simple solution
2005-03-11 19:40:34 +00:00
ath_rate_onoe \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
aue \
Port NetBSD auxio driver. The driver was modified to use led(4) and can be used to announce various system activity. The auxio device provides auxiliary I/O functions and is found on various SBus/EBus UltraSPARC models. At present, only front panel LED is controlled by this driver. Approved by: jake (mentor) Reviewed by: joerg Tested by: joerg
2004-10-09 07:31:03 +00:00
${_auxio} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_awi} \
Add device driver support for the ASIX Electronics AX88172 USB 2.0 ethernet controller. The driver has been tested with the LinkSys USB200M adapter. I know for a fact that there are other devices out there with this chip but don't have all the USB vendor/device IDs. Note: I'm not sure if this will force the driver to end up in the install kernel image or not. Special magic needs to be done to exclude it to keep the boot floppies from bloating again, someone please advise.
2003-04-20 19:05:33 +00:00
axe \
Add a device driver for the Broadcom BCM4401 ethernet controller, written by Stuart Walsh and Duncan Barclay (with some kibbitzing by me). I'm checking it in on Stuart's behalf. The BCM4401 is built into several x86 laptop and desktop systems. For the moment, I have only enabled it in the x86 kernel config because although it's a PCI device, I haven't heard of any standalone NICs that use it. If somebody knows of one, we can easily add it to the other arches. This driver uses register/structure data gleaned from the Linux driver released by Broadcom, but does not contain any of the code from the Linux driver itself. It uses busdma.
2003-09-09 18:17:23 +00:00
bfe \
Add device driver support for the Broadcom BCM570x family of gigabit ethernet controllers. This adds support for the 3Com 3c996-T, the SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on Dell PowerEdge 2550 servers. The latter configuration hauls ass: preliminary measurements show TCP speeds of over 900Mbps using only normal size frames. TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping are supported, as well as interrupt moderation. Still need to fix autonegotiation support for 1000baseSX NICs, but beyond that, driver is pretty solid.
2001-09-27 23:55:28 +00:00
bge \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_bios} \
${_bktr} \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 07:09:27 +00:00
bridge \
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
cam \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_canbepm} \
${_canbus} \
${_cardbus} \
${_cbb} \
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
cd9660 \
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
cd9660_iconv \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ciss} \
${_cm} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
coda \
Add support for the Coda 6.x venus<->kernel interface. This extends FIDs to be 128-bits wide and adds support for realms. Add a new CODA_COMPAT_5 option, which requests support for the old Coda 5.x interface instead of the new one. Create a new coda5.ko module that supports the 5.x interface, and make the existing coda.ko module use the new 6.x interface. These modules cannot both be loaded at the same time. Obtained from: Jan Harkes & the coda-6.0.2 distribution, NetBSD (drochner) (CODA_COMPAT_5 option).
2003-09-07 07:43:10 +00:00
coda5 \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_coff} \
Connect Cronyx Tau-PCI to the system.
2004-05-17 14:24:52 +00:00
${_cp} \
Only compile the cpufreq driver on i386 and amd64.
2005-02-05 08:01:10 +00:00
${_cpufreq} \
Module-ize the 'core' crypto stuff. This may still need to be compiled into the kernel by default (if required), but other modules can now depend() on this. Fix inter-module dependancy. Earlier version OK'ed by: sam
2002-10-16 14:31:34 +00:00
${_crypto} \
${_cryptodev} \
Add cs module. It has built in my tree for ages, and it just never made it into FreeBSD's tree.
2005-01-26 21:27:26 +00:00
${_cs} \
Connect ctau driver (Cronyx-Tau/ISA) to modules build process. Approved by: imp (mentor)
2004-03-25 17:20:45 +00:00
${_ctau} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
cue \
Adding missing cx (cronyx/Sigma) entry. Approved by: imp (mentor)
2004-02-14 21:14:38 +00:00
${_cx} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
dc \
Add dumb console driver and related bits. dcons(4): very simple console and gdb port driver dcons_crom(4): FireWire attachment dconschat(8): User interface to dcons Tested with: i386, i386-PAE, and sparc64.
2003-10-24 15:44:10 +00:00
dcons \
dcons_crom \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
de \
Build "digi" on i386, pc98, and amd64 only.
2005-01-30 19:41:12 +00:00
${_digi} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_dpt} \
${_drm} \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 07:09:27 +00:00
dummynet \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ed} \
${_el} \
${_elink} \
${_em} \
Fix the breakage introduced by rev. 1.43 of sys/dev/midway.c (don't commit on friday 13th and without making a universe). This adds struct and constant definitions for ATM traffic parameters and re-enables the build of the midway driver. Tested by: make universe
2003-06-16 13:52:27 +00:00
en \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ep} \
${_ex} \
${_exca} \
${_ext2fs} \
This is a driver for Fore PCA200E cards that uses busdma and works on little endian and big endian and with 32 and 64 bit pointers. It already has the hooks to be used for HARP, NATM and ngATM.
2003-06-23 14:46:12 +00:00
fatm \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
fdc \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
fdescfs \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_fe} \
Move firewire back to being MI.
2002-11-07 16:19:43 +00:00
firewire \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
fxp \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_gem} \
Add GEOM module compilation shims.
2003-05-31 18:36:41 +00:00
geom \
This is a pseudo physical interface for the HARP ATM stack. When loaded it attaches to all existing NATM network interfaces in the system and creates a HARP physical interface for each of them. This allows us to use the same set of ATM drivers for all ATM stuff. It is possible to use the same interface for HARP, NATM and netgraph at the same time.
2003-07-21 13:56:22 +00:00
harp \
This is a driver for Fore/Marconi HE155 and HE622 ATM cards. It is full busdma and has extensively been tested on i386 and sparc64.
2003-06-17 16:12:50 +00:00
hatm \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_hfa} \
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
hifn \
Now that hme(4) is MI build its module on all platforms. Tested by: `make universe` and powerpc cross-build on i386
2004-08-14 22:40:16 +00:00
hme \
Hook the hptmv driver up to the build.
2004-10-24 08:53:40 +00:00
${_hptmv} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_i2c} \
${_ibcs2} \
Add a driver for the watchdog timer function present on the LPC interface bridge in Intel ICH-series chipsets. The original implementation was by W. Daryl Hawkins of Texas A&M, but I have made substantial modifications.
2004-05-11 18:21:38 +00:00
${_ichwd} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ida} \
${_idt} \
${_ie} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_disc \
if_ef \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
if_faith \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_gif \
Connect if_gre module to the build.
2002-09-06 17:18:53 +00:00
if_gre \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_ppp \
if_sl \
if_stf \
if_tap \
if_tun \
Attach if_vlan to the build process.
2001-09-05 23:47:46 +00:00
if_vlan \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_iir} \
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
${_io} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ip6fw \
IPDIVERT is a module now and tell the other parts of the kernel about it. IPDIVERT depends on IPFIREWALL being loaded or compiled into the kernel.
2004-10-25 20:02:34 +00:00
ipdivert \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ipfilter} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ipfw \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
ip_mroute_mod \
${_ips} \
Add an isp(4) module. sbus support is only compiled in on sparc64. pci support is always compiled in.
2002-10-31 19:50:18 +00:00
isp \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ispfw \
joy \
kue \
lge \
Connect libiconv to the build. Recent work by fjoe and bp has fixed smbfs. The smbfs module can now be loaded once libiconv and libmchain have been loaded, and works!
2001-12-12 10:11:16 +00:00
libiconv \
Add a facility for devices, specifically network interfaces, that require large to huge amounts of small or medium sized receive buffers. The problem with these situations is that they eat up the available DMA address space very quickly when using mbufs or even mbuf clusters. Additionally this facility provides a direct mapping between 32-bit integers and these buffers. This is needed for devices originally designed for 32-bit systems. Ususally the virtual address of the buffer is used as a handle to find the buffer as soon as it is returned by the card. This does not work for 64-bit machines and hence this mapping is needed.
2003-07-15 08:59:38 +00:00
libmbpool \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
libmchain \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_linprocfs} \
${_linux} \
${_lnc} \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
lpt \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_biba \
mac_bsdextended \
mac_ifoff \
Hook up the mac_lomac module build. Approved by: re Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-11-26 17:35:44 +00:00
mac_lomac \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_mls \
mac_none \
Provide a simple sample labeled access control policy, mac_partition. This policy can be loaded dynamically, and assigns each process a partition number, as well as permitting processes to operate outside the partition. Processes contained in a partition can only "see" processes inside the same partition, so it's a little like jail. The partition of a user can be set using the label mechanisms in login.conf. This sample policy is a good starting point for developers wanting to learn about how to produce labeled policies, as it labels only one kernel object, the process credential. PR: Submitted by: Reviewed by: Approved by: Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-10-23 23:36:26 +00:00
mac_partition \
A cute yet small MAC policy that provides a simple ACL mechanism to permit users and groups to bind ports for TCP or UDP, and is intended to be combined with the recently committed support for net.inet.ip.portrange.reservedhigh. The policy is twiddled using sysctl(8). To use this module, you will need to compile in MAC support, and probably set reservedhigh to 0, then twiddle security.mac.portacl.rules to set things as desired. This policy module only restricts ports explicitly bound using bind(), not implicitly bound ports where the port number is selected by the IP stack. It appears to work properly in my local configuration, but needs more broad testing. A sample policy might be: # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79" This permits uid 425 to bind TCP sockets to ports 79 and 80. Currently no distinction is made for incoming vs. outgoing ports with TCP, although that would probably be easy to add. Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
mac_portacl \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_seeotheruids \
Hook up mac_stub to the modules Makefile. Hook up mac_stub in files and options. Reference mac_stub in NOTES.
2003-08-21 16:48:39 +00:00
mac_stub \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_test \
Turn on the mcd(4) module.
2002-10-04 07:15:34 +00:00
mcd \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
md \
Really back out rev 1.388.
2004-08-02 19:21:51 +00:00
mem \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
mii \
mlx \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_mly} \
Add a module for mpt(4).
2002-10-31 19:39:23 +00:00
mpt \
Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san
2004-12-12 20:05:50 +00:00
${_mse} \
Oops. Actually connect back msdosfs to the build for every platform. Spotted by: bde
2002-10-06 08:07:40 +00:00
msdosfs \
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
msdosfs_iconv \
Hook up the if_my module to the build.
2003-02-27 14:49:56 +00:00
my \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ncp} \
${_ncv} \
${_ndis} \
Enable build of Netgraph modules on all architectures. Tested by: make universe
2004-08-18 11:59:28 +00:00
netgraph \
Cleanup and split of nfs client and server code. This builds on the top of several repo-copies.
2001-09-18 23:32:09 +00:00
nfsclient \
nfsserver \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
nge \
FreeBSD consumer bits of the nForce MCP NIC binary blob. Demanded by: DES Encouraged by: scottl Obtained from: q@onthenet.com.au (partially) KNF'ed by: obrien
2005-03-12 00:29:30 +00:00
${_nve} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
nmdm \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_nsp} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ntfs \
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
ntfs_iconv \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
nullfs \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_nwfs} \
${_oltr} \
${_osf1} \
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
patm \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_pccard} \
${_pcfclock} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
pcn \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_pecoff} \
Link pf to the build and install: This adds the former ports registered groups: proxy and authpf as well as the proxy user. Make sure to run mergemaster -p in oder to complete make installworld without errors. This also provides the passive OS fingerprints from OpenBSD (pf.os) and an example pf.conf. For those who want to go without pf; it provides a NO_PF knob to make.conf. __FreeBSD_version will be bumped soon to reflect this and to be able to change ports accordingly. Approved by: bms(mentor)
2004-03-08 22:03:29 +00:00
${_pf} \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
plip \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_pmc} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
portalfs \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
ppbus \
ppi \
pps \
Move the pseudofs, procfs and linprocfs modules out from the fs directory. Keeping them there seemed like a good idea at the time, but it annoys bde and confuses people who do not understand how MODULES_OVERRIDE works.
2002-02-04 20:16:50 +00:00
procfs \
pseudofs \
"pst" is not 64-bit clean for reasons specified in sys/amd64/conf/NOTES.
2005-01-27 11:07:13 +00:00
${_pst} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
${_random} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ray} \
Move rc(4) over to MI notes and enable it as a MI module.
2002-11-08 19:34:26 +00:00
rc \
hookup wlan and rcv4 modules to the build Reviewed by: imp
2003-01-15 20:06:38 +00:00
rc4 \
Take the support for the 8139C+/8169/8169S/8110S chips out of the rl(4) driver and put it in a new re(4) driver. The re(4) driver shares the if_rlreg.h file with rl(4) but is a separate module. (Ultimately I may change this. For now, it's convenient.) rl(4) has been modified so that it will never attach to an 8139C+ chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to match the 8169/8169S/8110S gigE chips. if_re.c contains the same basic code that was originally bolted onto if_rl.c, with the following updates: - Added support for jumbo frames. Currently, there seems to be a limit of approximately 6200 bytes for jumbo frames on transmit. (This was determined via experimentation.) The 8169S/8110S chips apparently are limited to 7.5K frames on transmit. This may require some more work, though the framework to handle jumbo frames on RX is in place: the re_rxeof() routine will gather up frames than span multiple 2K clusters into a single mbuf list. - Fixed bug in re_txeof(): if we reap some of the TX buffers, but there are still some pending, re-arm the timer before exiting re_txeof() so that another timeout interrupt will be generated, just in case re_start() doesn't do it for us. - Handle the 'link state changed' interrupt - Fix a detach bug. If re(4) is loaded as a module, and you do tcpdump -i re0, then you do 'kldunload if_re,' the system will panic after a few seconds. This happens because ether_ifdetach() ends up calling the BPF detach code, which notices the interface is in promiscuous mode and tries to switch promisc mode off while detaching the BPF listner. This ultimately results in a call to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init() to handle the IFF_PROMISC flag change. Unfortunately, calling re_init() here turns the chip back on and restarts the 1-second timeout loop that drives re_tick(). By the time the timeout fires, if_re.ko has been unloaded, which results in a call to invalid code and blows up the system. To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(), which stops the ioctl routine from trying to reset the chip. - Modified comments in re_rxeof() relating to the difference in RX descriptor status bit layout between the 8139C+ and the gigE chips. The layout is different because the frame length field was expanded from 12 bits to 13, and they got rid of one of the status bits to make room. - Add diagnostic code (re_diag()) to test for the case where a user has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some NICs have the REQ64# and ACK64# lines connected even though the board is 32-bit only (in this case, they should be pulled high). This fools the chip into doing 64-bit DMA transfers even though there is no 64-bit data path. To detect this, re_diag() puts the chip into digital loopback mode and sets the receiver to promiscuous mode, then initiates a single 64-byte packet transmission. The frame is echoed back to the host, and if the frame contents are intact, we know DMA is working correctly, otherwise we complain loudly on the console and abort the device attach. (At the moment, I don't know of any way to work around the problem other than physically modifying the board, so until/unless I can think of a software workaround, this will have do to.) - Created re(4) man page - Modified rlphy.c to allow re(4) to attach as well as rl(4). Note that this code works for the sample 8169/Marvell 88E1000 NIC that I have, but probably won't work for the 8169S/8110S chips. RealTek has sent me some sample NICs, but they haven't arrived yet. I will probably need to add an rlgphy driver to handle the on-board PHY in the 8169S/8110S (it needs special DSP initialization).
2003-09-08 02:11:25 +00:00
re \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
rl \
rp \
Add RealTek RTL8150 USB to fast Ethernet controller driver. This driver now supports the Melco LUA-KTX and the GREEN HOUSE GH-USB100B. Reviewed by: imp MFC after: 2 weeks
2003-05-03 10:16:56 +00:00
rue \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_s3} \
${_safe} \
${_sbni} \
Driver for Granch SBNI16 SHDSL modem Submitted by: Denis I. Timofeev <timofeev@granch.ru> MFC after: 1 week
2003-04-13 06:27:13 +00:00
sbsh \
Hook up scd(4) to the build. Noticed by: ru
2003-06-23 20:52:03 +00:00
scd \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_scsi_low} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sf \
sis \
sk \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_smbfs} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sn \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_snc} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
snp \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_sound} \
${_speaker} \
${_splash} \
${_sppp} \
${_sr} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ste \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_stg} \
${_streams} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sym \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_syscons} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sysvipc \
ti \
tl \
Connect trm(4) to the build. Reviewed by: mux (mentor) Approved by: mux (mentor)
2002-10-13 18:44:26 +00:00
trm \
Added 3ware's twa. Reviewed by: ps
2004-04-27 17:57:45 +00:00
${_twa} \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
twe \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
tx \
You were knocked senseless by the Boomerang, spun around by the Cyclone, blown over by the Hurricane and had a house dropped on you by the Tornado. Now it's time to have your parade rained on by... the Typhoon! This commit adds driver support for 3Com 3cR990 10/100 ethernet adapters based on the Typhoon I and Typhoon II chipsets. This is actually a port of the OpenBSD driver with many hacks by me. No Virginia, there isn't any support for the hardware crypto yet. However there is support for TCP/IP checksum offload and VLANs. Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for squeezing enough info out of 3Com to get this written, and for doing most of the hard work. Manual page is included. Compiled as a module and included in GENERIC.
2001-07-23 20:44:54 +00:00
txp \
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
${_uart} \
Connect ubsa module to build. Forgotten by: kan
2002-10-20 20:35:14 +00:00
ubsa \
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
ubsec \
add driver for BWCT console management serials
2004-03-01 02:34:49 +00:00
ubser \
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
ucom \
Device driver for the Cypress CY7C637xx and CY7C640/1xx families of USB to RS232 bridges, such as the one found in the DeLorme Earthmate USB GPS receiver (which is the only device currently supported by this driver). While other USB to serial drivers in the tree rely heavily on ucom, this one is self-contained. The reason for that is that ucom assumes that the bridge uses bulk pipes for I/O, while the Cypress parts actually register as human interface devices and use HID reports for configuration and I/O. The driver is not entirely complete: there is no support yet for flow control, and output doesn't seem to work, though I don't know if that is because of a bug in the code, or simply because the Earthmate is a read- only device.
2004-09-05 09:43:47 +00:00
ucycom \
add support DM9601(DAVICOM USB to Ethernet MAC Controller with Integrated 10/100 PHY) - Corega FEther USB-TXC PR: kern/62932 Submitted by: HASHI Hiroaki <hashiz@tomba.cskk-sv.co.jp> Obtained from: NetBSD
2004-02-28 00:12:47 +00:00
udav \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
udbp \
Add a filesystem driver for the Universal Disk Format. For more info, see http://people.freebsd.org/~scottl/udf MFC after: when asmodai gets the backport done Prodded by: phk asmodai des
2002-04-14 16:36:49 +00:00
udf \
Add the Makefile glue for the udf_iconv module. Submitted by: imura@ryu16.org
2003-11-07 09:38:05 +00:00
udf_iconv \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
ufm \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ufs} \
Add the uftdi ucom driver which supports the following adapters: Inland UAS111 QVS USC-1000 HP USB-Serial adapter shipped with some HP laptops Submitted by: takawata MFC After: 7 days
2002-08-11 23:32:33 +00:00
uftdi \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ugen \
uhid \
ukbd \
ulpt \
umass \
Hook umct up to the module tree.
2003-06-28 05:46:16 +00:00
umct \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
umodem \
ums \
unionfs \
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
uplcom \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
urio \
usb \
The USB scanner driver. To be used together with SANE.
2000-10-25 10:34:38 +00:00
uscanner \
This is a driver for the physical layer chips used in ATM interfaces. It currently supports the PMC Sierra Lite, Ultra and 622 chips and the IDT 77105. The driver handles media options and state in a consistent manner for ATM drivers. The next commit to the midway driver will make it use utopia.
2003-06-12 14:28:32 +00:00
utopia \
Commit a version of the uvisor driver for connecting Handspring Visors via USB. Submitted by: Chia-liang Kao <clkao@clkao.org>
2002-07-30 17:44:28 +00:00
uvisor \
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
uvscom \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_vesa} \
Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, but not to sparc or ia64 since I don't have the ability to test it there. The vge(4) driver supports VLANs, checksum offload and jumbo frames. Also added the lge(4) and nge(4) drivers to GENERIC for i386 and pc98 since I was in the neighborhood. There's no reason to leave them out anymore.
2004-09-10 20:57:46 +00:00
vge \
Add vkdb(4) man page and connect vkbd(4) to the build.
2004-11-16 17:19:04 +00:00
vkbd \
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
${_vpo} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
vr \
vx \
wb \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_wi} \
hookup wlan and rcv4 modules to the build Reviewed by: imp
2003-01-15 20:06:38 +00:00
wlan \
connect wlan_acl to the build Submitted by: Alexey Zelkin
2005-03-09 15:53:27 +00:00
wlan_acl \
Update/new modules for net80211 and ath changes.
2004-12-08 17:38:38 +00:00
wlan_ccmp \
wlan_tkip \
wlan_wep \
wlan_xauth \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_xe} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
xl
Add the usb module and move the USB related modules into the generic section USB seems to compile on Alpha's as well.
1999-11-22 03:48:33 +00:00
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
.if ${MACHINE_ARCH} != "sparc64" && ${MACHINE_ARCH} != "powerpc"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_syscons= syscons
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
.if ${MACHINE_ARCH} != "powerpc"
Fix alignment in the last commit.
2005-02-03 08:07:22 +00:00
_uart= uart
_vpo= vpo
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if defined(ALL_MODULES)
_ufs= ufs
The ext2fs module needs a machine-dependent bitops.h file, so only build it on the i386 and alpha architectures, where this has been set up (there is also a sparc64-bitops.h in sys/gnu/ext2fs, but it appears to be broken and it is not linked up). This should unbreak the sparc64 LINT build.
2003-06-24 13:35:46 +00:00
.endif
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
NOCRYPT -> NO_CRYPT
2004-12-21 10:16:04 +00:00
.if !defined(NO_CRYPT) || defined(ALL_MODULES)
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if exists(${.CURDIR}/../opencrypto)
_crypto= crypto
_cryptodev= cryptodev
.endif
.if exists(${.CURDIR}/../crypto)
_random= random
.endif
Replaced hacks in sbin/Makefile,v 1.99 and usr.sbin/Makefile,v 1.217 with the NO_IPFILTER make.conf(5) knob. (So that we can "make the-rest-of-the-world" again.)
2002-03-21 09:15:39 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if !defined(NO_IPFILTER) || defined(ALL_MODULES)
_ipfilter= ipfilter
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
.endif
Link pf to the build and install: This adds the former ports registered groups: proxy and authpf as well as the proxy user. Make sure to run mergemaster -p in oder to complete make installworld without errors. This also provides the passive OS fingerprints from OpenBSD (pf.os) and an example pf.conf. For those who want to go without pf; it provides a NO_PF knob to make.conf. __FreeBSD_version will be bumped soon to reflect this and to be able to change ports accordingly. Approved by: bms(mentor)
2004-03-08 22:03:29 +00:00
.if !defined(NO_PF) || defined(ALL_MODULES)
_pf= pf
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if ${MACHINE_ARCH} == "i386"
Don't try to build i386-centric modules on non-i386 systems.
1998-11-04 17:15:07 +00:00
# XXX some of these can move to the general case when de-i386'ed
Add cardbus, cbb, ep and pccard. These can likely be moved to the MI section, but I've not had a chance to build them on other architectures recently enough to add them.
2002-09-26 05:54:24 +00:00
# XXX some of these can move now, but are untested on other architectures.
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_3dfx= 3dfx
_agp= agp
_aic= aic
_amd= amd
_aout= aout
_apm= apm
_ar= ar
_arcnet= arcnet
_ath_hal= ath_hal
_awi= awi
_bktr= bktr
_coff= coff
Connect Cronyx Tau-PCI to the system.
2004-05-17 14:24:52 +00:00
_cp= cp
Only compile the cpufreq driver on i386 and amd64.
2005-02-05 08:01:10 +00:00
_cpufreq= cpufreq
Build "digi" on i386, pc98, and amd64 only.
2005-01-30 19:41:12 +00:00
_digi= digi
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_drm= drm
_ed= ed
_elink= elink
_em= em
_ep= ep
_ext2fs= ext2fs
_fe= fe
_hfa= hfa
_i2c= i2c
_ibcs2= ibcs2
_ie= ie
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
_io= io
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_linprocfs= linprocfs
_linux= linux
_lnc= lnc
Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san
2004-12-12 20:05:50 +00:00
_mse= mse
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ncp= ncp
_ncv= ncv
_ndis= ndis
_nsp= nsp
FreeBSD consumer bits of the nForce MCP NIC binary blob. Demanded by: DES Encouraged by: scottl Obtained from: q@onthenet.com.au (partially) KNF'ed by: obrien
2005-03-12 00:29:30 +00:00
_nve= nve
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_nwfs= nwfs
_oltr= oltr
_pccard= pccard
_pcfclock= pcfclock
_pecoff= pecoff
"pst" is not 64-bit clean for reasons specified in sys/amd64/conf/NOTES.
2005-01-27 11:07:13 +00:00
_pst= pst
Put _ray back, as appropriate.
2004-11-15 16:33:18 +00:00
_ray= ray
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_safe= safe
_sbni= sbni
_scsi_low= scsi_low
_smbfs= smbfs
_sound= sound
_speaker= speaker
_splash= splash
_sppp= sppp
_sr= sr
_stg= stg
_streams= streams
_wi= wi
_xe= xe
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.if ${MACHINE} == "i386"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_aac= aac
_acpi= acpi
The ahb module is not needed for pc98.
2004-06-30 13:09:13 +00:00
_ahb= ahb
Move the arl to i386 only.
2004-03-16 12:43:08 +00:00
_arl= arl
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_asr= asr
_bios= bios
_cardbus= cardbus
_cbb= cbb
_ciss= ciss
_cm= cm
Add cs module. It has built in my tree for ages, and it just never made it into FreeBSD's tree.
2005-01-26 21:27:26 +00:00
_cs= cs
Connect ctau driver (Cronyx-Tau/ISA) to modules build process. Approved by: imp (mentor)
2004-03-25 17:20:45 +00:00
_ctau= ctau
Adding missing cx (cronyx/Sigma) entry. Approved by: imp (mentor)
2004-02-14 21:14:38 +00:00
_cx= cx
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_dpt= dpt
_el= el
_ex= ex
_exca= exca
Hook the hptmv driver up to the build.
2004-10-24 08:53:40 +00:00
_hptmv= hptmv
Move the ichwd to i386 only.
2004-05-13 11:13:55 +00:00
_ichwd= ichwd
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ida= ida
_idt= idt
_iir= iir
_ips= ips
_mly= mly
_s3= s3
Added 3ware's twa. Reviewed by: ps
2004-04-27 17:57:45 +00:00
_twa= twa
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_vesa= vesa
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.elif ${MACHINE} == "pc98"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_canbepm= canbepm
_canbus= canbus
_pmc= pmc
_snc= snc
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.endif
Don't build unneeded modules for pc98.
2002-09-16 08:32:48 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if ${MACHINE_ARCH} == "alpha"
_agp= agp
Add ahb module for i386 and alpha (the onlt two platforms that have eisa bus)
2004-06-29 21:20:17 +00:00
_ahb= ahb
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ext2fs= ext2fs
_linprocfs= linprocfs
_linux= linux
_osf1= osf1
_sound= sound
_sppp= sppp
.endif
Enable ndis for AMD64 (for the time that modules are supported)...
2004-01-28 04:15:10 +00:00
.if ${MACHINE_ARCH} == "amd64"
Enable aac(4) module build for amd64
2004-08-30 03:37:36 +00:00
_aac= aac
Add comment about why amd64 and ia64 don't build acpi modules.
2004-11-15 04:49:20 +00:00
#_acpi= acpi # doesn't work on amd64 yet
AMD64 on-CPU GART support. This also applies to AMD64 HW running 'i386' OS. Submitted by: Jung-uk Kim <jkim@niksun.com> Integration by: obrien
2004-08-16 12:25:48 +00:00
_agp= agp
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_ciss= ciss
Only compile the cpufreq driver on i386 and amd64.
2005-02-05 08:01:10 +00:00
_cpufreq= cpufreq
Build "digi" on i386, pc98, and amd64 only.
2005-01-30 19:41:12 +00:00
_digi= digi
AMD64 on-CPU GART support. This also applies to AMD64 HW running 'i386' OS. Submitted by: Jung-uk Kim <jkim@niksun.com> Integration by: obrien
2004-08-16 12:25:48 +00:00
_drm= drm
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_em= em
_ext2fs= ext2fs
_i2c= i2c
_ida= ida
_iir= iir
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
_io= io
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_ips= ips
Comment out "lnc" on amd64 for reasons specified in sys/amd64/conf/NOTES.
2005-01-27 09:21:23 +00:00
#_lnc= lnc
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_mly= mly
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
_ndis= ndis
FreeBSD consumer bits of the nForce MCP NIC binary blob. Demanded by: DES Encouraged by: scottl Obtained from: q@onthenet.com.au (partially) KNF'ed by: obrien
2005-03-12 00:29:30 +00:00
_nve= nve
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_safe= safe
_scsi_low= scsi_low
_smbfs= smbfs
Enable sound modules.
2004-08-29 09:14:18 +00:00
_sound= sound
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_sppp= sppp
_twa= twa
Enable ndis for AMD64 (for the time that modules are supported)...
2004-01-28 04:15:10 +00:00
.endif
Build modules on ia64: o Make the cam, cd9660 lomac and sound modules i386 and alpha specific due to link problems (@gprel relocation when @ltoff is required). Once resolved, these can be moved back to the generic list. o Build linprocfs only on those architectures that have the linux module. o Make the sppp module i386 and alpha specific due to compile problems (pointers as switch cases). Once resolved, this can be moved back to the generic list. o Build all i386 specific modules, with the exception of those mentioned above as being moved from the generic list to the i386 list and those with dependencies on the linux module (aac) or i386 dependent (ar, apm, atspeaker, fpu, gnufpu, ibcs2, linux, ncv, nsp, netgraph, oltr, pecoff, s3, sbni, stg and vesa). o Don't build acpi as a module yet. It most be ported first. Once ported, it can be added to the ia64 list. o Don't build ipfilter yet due to compile errors (osreldate.h not found).
2002-04-19 09:44:50 +00:00
.if ${MACHINE_ARCH} == "ia64"
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
# Modules not enabled on ia64 (as compared to i386) include:
Initiate de-orbit burn for fpu-less operation. 386+387 is still theoretically supportable, but you'd really be happier with FreeBSD 2.1.8 on it.
2003-07-22 08:11:17 +00:00
# aac acpi aout apm atspeaker drm ibcs2 linprocfs linux ncv
Build the following modules on ia64 as well: ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac, netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
# nsp oltr pecoff s3 sbni stg vesa
Add comment about why amd64 and ia64 don't build acpi modules.
2004-11-15 04:49:20 +00:00
# acpi is not enabled because it is broken as a module on ia64
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_aic= aic
The ar driver appears to do naughty things with pointers and integers and so appears to not be 64-bit clean. disable it on ia64 for the moment.
2005-01-27 01:12:58 +00:00
#_ar= ar not 64-bit clean
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_arcnet= arcnet
_asr= asr
_bktr= bktr
_cardbus= cardbus
_cbb= cbb
_ciss= ciss
_cm= cm
_coff= coff
_el= el
_em= em
_ep= ep
_exca= exca
_fe= fe
_hfa= hfa
_iir= iir
_mly= mly
_pccard= pccard
Put _ray back, as appropriate.
2004-11-15 16:33:18 +00:00
_ray= ray
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_scsi_low= scsi_low
_smbfs= smbfs
_sound= sound
_splash= splash
_sppp= sppp
ar and sr (and their netgraph cousins) don't appear to be 64-bit clean, so disable them on all but i386.
2005-01-27 01:45:15 +00:00
#_sr= sr not 64bit clean
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_streams= streams
_wi= wi
_xe= xe
Enable building of the OSF/1 compat module.
1999-12-15 13:14:23 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if ${MACHINE_ARCH} == "powerpc"
_gem= gem
Build gem(4) on powerpc also.
2003-01-09 16:37:37 +00:00
.endif
Add an hme(4) module. PR: 46871 Submitted by: Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-08 18:45:04 +00:00
.if ${MACHINE_ARCH} == "sparc64"
Port NetBSD auxio driver. The driver was modified to use led(4) and can be used to announce various system activity. The auxio device provides auxiliary I/O functions and is found on various SBus/EBus UltraSPARC models. At present, only front panel LED is controlled by this driver. Approved by: jake (mentor) Reviewed by: joerg Tested by: joerg
2004-10-09 07:31:03 +00:00
_auxio= auxio
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_gem= gem
Device driver for onboard CS4231 audio controller which is found on UltraSPARC workstations. The driver is based on OpenBSD's SBus cs4231 driver and heavily modified to incorporate into sound(4) infrastructure. Due to the lack of APCDMA documentation, the DMA code of SBus cs4231 came from OpenBSD's driver. The driver runs without Giant lock and supports both SBus and EBus based CS4231 audio controller. Special thanks to marius for providing feedbacks during the driver writing. His feedback made it possible to write hiccup free playback code under high system loads. Approved by: jake (mentor) Reviewed by: marius (initial version) Tested by: marius, kwm, Julian C. Dunn(jdunn AT opentrend DOT net)
2004-10-25 10:29:57 +00:00
_sound= sound
Include the ufs module if ALL_MODULES is defined so that it gets built by LINT. Also override a number of knobs for enabling and disabling various modules in the ALL_MODULES case to further increase LINT's module coverage. Submitted by: ru
2003-06-23 22:01:01 +00:00
.endif
Always build all modules for LINT
2002-02-17 21:00:20 +00:00
.if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES)
Add support for MODULES_OVERRIDE. This is a list of modules to build instead of all of them. You can put this in /etc/make.conf or in makeoptions. Reviewed by: arch@ # docs to follow.
2001-04-02 08:52:05 +00:00
SUBDIR=${MODULES_OVERRIDE}
.endif
Provide a WITHOUT_MODULES variable that specifies a list of modules to elide. This is a somewhat more convenient way of specifying in e.g. make.conf a list of modules you know you will never need. PR: kern/76225 Submitted by: David Yeske <dyeske@yahoo.com> MFC after: 2 weeks
2005-01-20 05:43:24 +00:00
.for reject in ${WITHOUT_MODULES}
SUBDIR:= ${SUBDIR:N${reject}}
.endfor
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
# Calling kldxref(8) for each module is expensive.
Run kldxref on sparc64, it works now.
2003-01-21 05:52:48 +00:00
.if !defined(NO_XREF)
Simplify the assignment statement.
2003-03-12 14:32:46 +00:00
.MAKEFLAGS+= -DNO_XREF
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
afterinstall:
Check that kldxref(8) exists before running it.
2002-05-14 07:49:12 +00:00
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
.endif
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
.include <bsd.subdir.mk>
Reference in New Issue Copy Permalink