d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fc8c856029
freebsd-nq/sys/mips/nlm/usb_init.c

92 lines
2.8 KiB
C
Raw Normal View History

Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
/*-
* Copyright 2003-2011 Netlogic Microsystems (Netlogic). All rights
* reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
*
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
* THIS SOFTWARE IS PROVIDED BY Netlogic Microsystems ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* NETLOGIC_BSD */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#include <sys/types.h>
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
#include <sys/systm.h>
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#include <sys/param.h>
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
#include <sys/kernel.h>
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#include <mips/nlm/hal/haldefs.h>
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
#include <mips/nlm/hal/iomap.h>
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#include <mips/nlm/hal/usb.h>
#include <mips/nlm/xlp.h>
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
static void
nlm_usb_intr_en(int node, int port)
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
{
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
uint32_t val;
uint64_t port_addr;
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
port_addr = nlm_get_usb_regbase(node, port);
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
val = nlm_read_usb_reg(port_addr, USB_INT_EN);
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN |
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN |
USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
nlm_write_usb_reg(port_addr, USB_INT_EN, val);
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
}
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
static void
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
nlm_usb_hw_reset(int node, int port)
{
uint64_t port_addr;
uint32_t val;
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
/* reset USB phy */
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
port_addr = nlm_get_usb_regbase(node, port);
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
val = nlm_read_usb_reg(port_addr, USB_PHY_0);
val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
nlm_write_usb_reg(port_addr, USB_PHY_0, val);
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
DELAY(100);
val = nlm_read_usb_reg(port_addr, USB_CTL_0);
val &= ~(USB_CONTROLLER_RESET);
val |= 0x4;
nlm_write_usb_reg(port_addr, USB_CTL_0, val);
}
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
static void
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
nlm_usb_init(void)
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
{
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
/* XXX: should be checking if these are in Device mode here */
printf("Initialize USB Interface\n");
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
nlm_usb_hw_reset(0, 0);
nlm_usb_hw_reset(0, 3);
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
/* Enable PHY interrupts */
Whitespace fixes for files in sys/mips/nlm Clean up whitespace issues under sys/mips/nlm (except dev). No functional change in this commit.
2015-02-28 00:17:29 +00:00
nlm_usb_intr_en(0, 0);
nlm_usb_intr_en(0, 3);
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
}
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
SYSINIT(nlm_usb_init, SI_SUB_CPU, SI_ORDER_MIDDLE,
nlm_usb_init, NULL);
Reference in New Issue Copy Permalink