freebsd-nq/sys/dev/si/si.h

/*
 * Device driver for Specialix range (SLXOS) of serial line multiplexors.
 * 'C' definitions for Specialix serial multiplex driver.
 *
 * Copyright (C) 1990, 1992 Specialix International,
 * Copyright (C) 1993, Andy Rutter <andy@acronym.co.uk>
 * Copyright (C) 1995, Peter Wemm <peter@haywire.dialix.com>
 *
 * Derived from:	SunOS 4.x version
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notices, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notices, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Andy Rutter of
 *	Advanced Methods and Tools Ltd. based on original information
 *	from Specialix International.
 * 4. Neither the name of Advanced Methods and Tools, nor Specialix
 *    International may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL THE AUTHORS BE LIABLE.
 *
 *	$Id: si.h,v 1.3 1995/08/22 00:42:07 peter Exp $
 */

/*
 * Macro to turn a device number into various parameters, and test for
 * CONTROL device.
 * max of 4 controllers with up to 32 ports per controller.
 * minor device allocation is:
 * adapter	port
 *   0          0-31
 *   1		32-63
 *   2		64-95
 *   3		96-127
 */
#define	SI_MAXPORTPERCARD	32
#define	SI_MAXCONTROLLER	4


/*
 * breakup of minor device number:
 * lowest 5 bits:	port number on card		0x1f
 * next 2 bits:		card number			0x60
 * top bit:		callout				0x80
 * next 8 bits is the major number
 * next 2 bits select initial/lock states
 * next 1 bit selects the master control device
 */

#define	SI_PORT_MASK		0x1f
#define	SI_CARD_MASK		0x60
#define	SI_TTY_MASK		0x7f
#define SI_CALLOUT_MASK		0x80
#define	SI_INIT_STATE_MASK	0x10000
#define	SI_LOCK_STATE_MASK	0x20000
#define	SI_STATE_MASK		0x30000
#define	SI_CONTROLDEV_MASK	0x40000
#define	SI_SPECIAL_MASK		0x70000

#define	SI_PORT(m)		(m & SI_PORT_MASK)
#define	SI_CARD(m)		((m & SI_CARD_MASK) >> 5)
#define	SI_TTY(m)		(m & SI_TTY_MASK)

#define	IS_CALLOUT(m)		(m & SI_CALLOUT_MASK)
#define	IS_STATE(m)		(m & SI_STATE_MASK)
#define	IS_CONTROLDEV(m)	(m & SI_CONTROLDEV_MASK)
#define	IS_SPECIAL(m)		(m & SI_SPECIAL_MASK)

#define	MINOR2SC(m)	(&si_softc[SI_CARD(m)])
#define	MINOR2PP(m)	(MINOR2SC((m))->sc_ports + SI_PORT((m)))
#define	MINOR2TP(m)	(MINOR2PP((m))->sp_tty)
#define	TP2PP(tp)	(MINOR2PP(SI_TTY(minor((tp)->t_dev))))

/* Adapter types */
#define	SIEMPTY		0
#define	SIHOST		1
#define	SI2		2
#define	SIHOST2		3
#define	SIEISA		4

/* Buffer parameters */
#define	SLXOS_BUFFERSIZE	256

typedef	unsigned char	BYTE;		/* Type cast for unsigned 8 bit */
typedef	unsigned short	WORD;		/* Type cast for unsigned 16 bit */


/*
 * Hardware `registers', stored in the shared memory.
 * These are related to the firmware running on the Z280.
 */

struct si_reg	{
	BYTE	initstat;
	BYTE	memsize;
	WORD	int_count;
	WORD	revision;
	BYTE	rx_int_count;
	BYTE	spare;
	WORD	int_pending;
	WORD	int_counter;
	BYTE	int_scounter;
	BYTE	res[0x80 - 13];
};

/*
 *	Per module control structure, stored in shared memory.
 */
struct si_module {
	WORD	sm_next;		/* Next module */
	BYTE	sm_type;		/* Number of channels */
	BYTE	sm_number;		/* Module number on cable */
	BYTE	sm_dsr;			/* Private dsr copy */
	BYTE	sm_res[0x80 - 5];	/* Reserve space to 128 bytes */
};

/*
 *	The 'next' pointer & with 0x7fff + SI base addres give
 *	the address of the next module block if fitted. (else 0)
 *	Note that next points to the TX buffer so 0x60 must be
 *	subtracted to find the true base.
 *
 *	Type is a bit field as follows:  The bottom 5 bits are the
 *	number of channels  on this module,  the top 3 bits are
 *	as the module type thus:
 *
 *	000	2698 RS232 module (4 port or 8 port)
 *	001	Reserved for 2698 RS422 module
 *	010	Reserved for 8530 based sync module
 *	011	Reserved for parallel printer module
 *	100	Reserved for network module
 *	101-111	Reserved for expansion.
 *
 *	The number field is the cable position of the module.
 */
#define	M232	0x00
#define M422	0x20	/* not supported */
#define MSYNC	0x40	/* this is the Telebit Netblazer module */
#define MCENT	0x60	/* not supported */
#define MNET	0x80	/* not supported */
#define MMASK	0x1F

/*
 *	Per channel(port) control structure, stored in shared memory.
 */
struct	si_channel {
	/*
	 * Generic stuff
	 */
	WORD	next;			/* Next Channel */
	WORD	addr_uart;		/* Uart address */
	WORD	module;			/* address of module struct */
	BYTE 	type;			/* Uart type */
	BYTE	fill;
	/*
	 * Uart type specific stuff
	 */
	BYTE	x_status;		/* XON / XOFF status */
	BYTE	c_status;		/* cooking status */
	BYTE	hi_rxipos;		/* stuff into rx buff */
	BYTE	hi_rxopos;		/* stuff out of rx buffer */
	BYTE	hi_txopos;		/* Stuff into tx ptr */
	BYTE	hi_txipos;		/* ditto out */
	BYTE	hi_stat;		/* Command register */
	BYTE	dsr_bit;		/* Magic bit for DSR */
	BYTE	txon;			/* TX XON char */
	BYTE	txoff;			/* ditto XOFF */
	BYTE	rxon;			/* RX XON char */
	BYTE	rxoff;			/* ditto XOFF */
	BYTE	hi_mr1;			/* mode 1 image */
	BYTE	hi_mr2;			/* mode 2 image */
        BYTE	hi_csr;			/* clock register */
	BYTE	hi_op;			/* Op control */
	BYTE	hi_ip;			/* Input pins */
	BYTE	hi_state;		/* status */
	BYTE	hi_prtcl;		/* Protocol */
	BYTE	hi_txon;		/* host copy tx xon stuff */
	BYTE	hi_txoff;
	BYTE	hi_rxon;
	BYTE	hi_rxoff;
	BYTE	close_prev;		/* Was channel previously closed */
	BYTE	hi_break;		/* host copy break process */
	BYTE	break_state;		/* local copy ditto */
	BYTE	hi_mask;		/* Mask for CS7 etc. */
	BYTE	mask_z280;		/* Z280's copy */
	BYTE	res[0x60 - 36];
	BYTE	hi_txbuf[SLXOS_BUFFERSIZE];
	BYTE	hi_rxbuf[SLXOS_BUFFERSIZE];
	BYTE	res1[0xA0];
};

/*
 *	Register definitions
 */

/*
 *	Break input control register definitions
 */
#define	BR_IGN		0x01	/* Ignore any received breaks */
#define	BR_INT		0x02	/* Interrupt on received break */
#define BR_PARMRK	0x04	/* Enable parmrk parity error processing */
#define	BR_PARIGN	0x08	/* Ignore chars with parity errors */

/*
 *	Protocol register provided by host for XON/XOFF and cooking
 */
#define	SP_TANY		0x01	/* Tx XON any char */
#define	SP_TXEN		0x02	/* Tx XON/XOFF enabled */
#define	SP_CEN		0x04	/* Cooking enabled */
#define	SP_RXEN		0x08	/* Rx XON/XOFF enabled */
#define	SP_DCEN		0x20	/* DCD / DTR check */
#define	SP_PAEN		0x80	/* Parity checking enabled */

/*
 *	HOST STATUS / COMMAND REGISTER
 */
#define	IDLE_OPEN	0x00	/* Default mode, TX and RX polled
				   buffer updated etc */
#define	LOPEN		0x02	/* Local open command (no modem ctl */
#define MOPEN		0x04	/* Open and monitor modem lines (blocks
				   for DCD */
#define MPEND		0x06	/* Wating for DCD */
#define CONFIG		0x08	/* Channel config has changed */
#define CLOSE		0x0A	/* Close channel */
#define SBREAK		0x0C	/* Start break */
#define EBREAK		0x0E	/* End break */
#define IDLE_CLOSE	0x10	/* Closed channel */
#define IDLE_BREAK	0x12	/* In a break */
#define FCLOSE		0x14	/* Force a close */
#define RESUME		0x16	/* Clear a pending xoff */
#define WFLUSH		0x18	/* Flush output buffer */
#define RFLUSH		0x1A	/* Flush input buffer */

/*
 *	Host status register
 */
#define	ST_BREAK	0x01	/* Break received (clear with config) */

/*
 *	OUTPUT PORT REGISTER
 */
#define	OP_CTS	0x01	/* Enable CTS */
#define OP_DSR	0x02	/* Enable DSR */
/*
 *	INPUT PORT REGISTER
 */
#define	IP_DCD	0x04	/* DCD High */
#define IP_DTR	0x20	/* DTR High */
#define IP_RTS	0x02	/* RTS High */
#define	IP_RI	0x40	/* RI  High */

/*
 *	Mode register and uart specific stuff
 */
/*
 *	MODE REGISTER 1
 */
#define	MR1_5_BITS	0x00
#define	MR1_6_BITS	0x01
#define	MR1_7_BITS	0x02
#define	MR1_8_BITS	0x03
/*
 *	Parity
 */
#define	MR1_ODD		0x04
#define	MR1_EVEN	0x00
/*
 *	Parity mode
 */
#define	MR1_WITH	0x00
#define	MR1_FORCE	0x08
#define	MR1_NONE	0x10
#define	MR1_SPECIAL	0x18
/*
 *	Error mode
 */
#define	MR1_CHAR	0x00
#define	MR1_BLOCK	0x20
/*
 *	Request to send line automatic control
 */
#define	MR1_CTSCONT	0x80

/*
 *	MODE REGISTER 2
 */
/*
 *	Number of stop bits
 */
#define	MR2_1_STOP	0x07
#define	MR2_2_STOP	0x0F
/*
 *	Clear to send automatic testing before character sent
 */
#define	MR2_RTSCONT	0x10
/*
 *	Reset RTS automatically after sending character?
 */
#define	MR2_CTSCONT	0x20
/*
 *	Channel mode
 */
#define	MR2_NORMAL	0x00
#define	MR2_AUTO	0x40
#define	MR2_LOCAL	0x80
#define	MR2_REMOTE	0xC0

/*
 *	CLOCK SELECT REGISTER - this and the code assumes ispeed == ospeed
 */
/*
 * Clocking rates are in lower and upper nibbles.. R = upper, T = lower
 */
#define	CLK75		0x0
#define	CLK110		0x1	/* 110 on XIO!! */
#define	CLK38400	0x2	/* out of sequence */
#define	CLK150		0x3
#define	CLK300		0x4
#define	CLK600		0x5
#define	CLK1200		0x6
#define	CLK2000		0x7
#define	CLK2400		0x8
#define	CLK4800		0x9
#define	CLK7200		0xa	/* unchecked */
#define	CLK9600		0xb
#define	CLK19200	0xc
#define	CLK57600	0xd

/*
 * Per-port (channel) soft information structure, stored in the driver.
 * This is visible via ioctl()'s.
 */
struct si_port {
	volatile struct si_channel *sp_ccb;
	struct tty	*sp_tty;
	int		sp_pend;	/* pending command */
	int		sp_last_hi_ip;	/* cached DCD */
	int		sp_state;
	int		sp_active_out;	/* callout is open */
	int		sp_flags;
	int		sp_dtr_wait;	/* DTR holddown in hz */
	u_int		sp_wopeners;	/* # procs waiting DCD */
	u_char		sp_hotchar;	/* ldisc specific ASAP char */
	/* Initial state. */
	struct termios	sp_iin;
	struct termios	sp_iout;
	/* Lock state. */
	struct termios	sp_lin;
	struct termios	sp_lout;
#ifdef	SI_DEBUG
	int		sp_debug;	/* debug mask */
#endif
};

/* sp_state */
#define	SS_CLOSED	0x0000
#define	SS_OPEN		0x0001	/* Port is active			*/
/*			0x0002	--					*/
/*			0x0004	--					*/
/*			0x0008	--					*/
/*			0x0010	--					*/
/*			0x0020	--					*/
/*			0x0040	-- 	 				*/
/*			0x0080	-- 	 				*/
#define SS_LSTART	0x0100	/* lstart timeout pending		*/
#define SS_INLSTART	0x0200	/* running an lstart induced t_oproc	*/
#define SS_CLOSING	0x0400	/* in the middle of a siclose()		*/
/*			0x0800	--					*/
#define	SS_WAITWRITE	0x1000
#define	SS_BLOCKWRITE	0x2000
#define	SS_DTR_OFF	0x4000	/* DTR held off				*/

/* sp_flags */
#define	SPF_COOKMODE		0x0003
#define	 SPFC_WELL			0
#define	 SPFC_MEDIUM			1
#define	 SPFC_RAW			2
#define	 spfc_clear(pp)		(pp)->sp_flags &= ~SPF_COOKMODE
#define	 SPF_COOK_WELL(pp)	spfc_clear(pp)
#define	 SPF_COOK_MEDIUM(pp)	{spfc_clear(pp);(pp)->sp_flags|=SPFC_MEDIUM;}
#define	 SPF_COOK_RAW(pp)	{spfc_clear(pp);(pp)->sp_flags|=SPFC_RAW;}
#define	 SPF_SETCOOK(pp, c)	{spfc_clear(pp);(pp)->sp_flags|=(c);}
#define  SPF_ISCOOKWELL(pp)	(((pp)->sp_flags & SPF_COOKMODE) == SPFC_WELL)
#define  SPF_ISCOOKMEDIUM(pp)	(((pp)->sp_flags & SPF_COOKMODE) == SPFC_MEDIUM)
#define  SPF_ISCOOKRAW(pp)	(((pp)->sp_flags & SPF_COOKMODE) == SPFC_RAW)
#define	SPF_COOKWELL_ALWAYS	0x0004	/* always use line disc */
/*				0x0008	*/
#define	SPF_IXANY		0x0020		/* IXANY enable/disable flag */
#define	SPF_CTSOFLOW		0x0040		/* use CTS to handle o/p flow */
#define	SPF_RTSIFLOW		0x0080		/* use RTS to handle i/p flow */
#define	SPF_PPP			0x0100		/* special handling for upper
						 * level protocol code */

/*
 *	Command post flags
 */
#define	SI_NOWAIT	0x00	/* Don't wait for command */
#define SI_WAIT		0x01	/* Wait for complete */

/*
 * Extensive debugging stuff - manipulated using siconfig(8)
 */
#define	DBG_ENTRY		0x00000001
#define	DBG_DRAIN		0x00000002
#define	DBG_OPEN		0x00000004
#define	DBG_CLOSE		0x00000008
#define	DBG_READ		0x00000010
#define	DBG_WRITE		0x00000020
#define	DBG_PARAM		0x00000040
#define	DBG_INTR		0x00000080
#define	DBG_IOCTL		0x00000100
/*				0x00000200 */
#define	DBG_SELECT		0x00000400
#define	DBG_OPTIM		0x00000800
#define	DBG_START		0x00001000
#define	DBG_EXIT		0x00002000
#define	DBG_FAIL		0x00004000
#define	DBG_STOP		0x00008000
#define	DBG_AUTOBOOT		0x00010000
#define	DBG_MODEM		0x00020000
#define	DBG_DOWNLOAD		0x00040000
#define	DBG_LSTART		0x00080000
#define	DBG_POLL		0x00100000
#define	DBG_ALL			0xffffffff

/*
 *	SI ioctls
 */
/*
 * struct for use by Specialix ioctls - used by siconfig(8)
 */
typedef struct {
	unsigned char
		sid_port:5,			/* 0 - 31 ports per card */
		sid_card:2,			/* 0 - 3 cards */
		sid_control:1;			/* controlling device (all cards) */
} sidev_t;
struct si_tcsi {
	sidev_t	tc_dev;
	union {
		int	x_int;
		int	x_dbglvl;
	}	tc_action;
#define	tc_card		tc_dev.sid_card
#define	tc_port		tc_dev.sid_port
#define	tc_int		tc_action.x_int
#define	tc_dbglvl	tc_action.x_dbglvl
};

struct si_pstat {
	sidev_t	tc_dev;
	union {
		struct si_port    x_siport;
		struct si_channel x_ccb;
		struct tty        x_tty;
	} tc_action;
#define tc_siport	tc_action.x_siport
#define tc_ccb		tc_action.x_ccb
#define tc_tty		tc_action.x_tty
};

#define	IOCTL_MIN	96
#define	TCSIDEBUG	_IOW('S', 96, struct si_tcsi)	/* Toggle debug */
#define	TCSIRXIT	_IOW('S', 97, struct si_tcsi)	/* RX int throttle */
#define	TCSIIT		_IOW('S', 98, struct si_tcsi)	/* TX int throttle */
			/* 99 defunct */
			/* 100 defunct */
			/* 101 defunct */
			/* 102 defunct */
			/* 103 defunct */
#define	TCSIIXANY	_IOW('S', 103, struct si_tcsi)	/* enable ixany */
			/* 104 defunct */
#define	TCSISTATE	_IOWR('S', 105, struct si_tcsi)	/* get current state of RTS
						   DCD and DTR pins */
		/* Set/reset/enquire cook mode, 1 = always use line disc
		 * -1 = enquire current setting */
#define	TCSICOOKMODE	_IOWR('S', 106, struct si_tcsi)
#define	TCSIPORTS	_IOR('S', 107, int)	/* Number of ports found */
#define	TCSISDBG_LEVEL	_IOW('S', 108, struct si_tcsi)	/* equivalent of TCSIDEBUG which sets a
					 * particular debug level (DBG_??? bit
					 * mask), default is 0xffff */
#define	TCSIGDBG_LEVEL	_IOWR('S', 109, struct si_tcsi)
#define	TCSIGRXIT	_IOWR('S', 110, struct si_tcsi)
#define	TCSIGIT		_IOWR('S', 111, struct si_tcsi)
			/* 112 defunct */
			/* 113 defunct */
			/* 114 defunct */
			/* 115 defunct */
			/* 116 defunct */
#define	TCSIMODEM	_IOWR('S', 117, struct si_tcsi)	/* set/clear/query the modem bit */

#define	TCSISDBG_ALL	_IOW('S', 118, int)		/* set global debug level */
#define	TCSIGDBG_ALL	_IOR('S', 119, int)		/* get global debug level */

#define	TCSIFLOW	_IOWR('S', 120, struct si_tcsi)	/* set/get h/w flow state */
			/* 121 defunct */
			/* 122 defunct */


#define	TCSIPPP		_IOWR('S', 123, struct si_tcsi)	/* set/get PPP flag bit */
#define	TCSIMODULES	_IOR('S', 124, int)	/* Number of modules found */

/* Various stats and monitoring hooks per tty device */
#define	TCSI_PORT	_IOWR('S', 125, struct si_pstat) /* get si_port */
#define	TCSI_CCB	_IOWR('S', 126, struct si_pstat) /* get si_ccb */
#define	TCSI_TTY	_IOWR('S', 127, struct si_pstat) /* get tty struct */

#define	IOCTL_MAX	127

#define	IS_SI_IOCTL(cmd)	((u_int)((cmd)&0xff00) == ('S'<<8) && \
		(u_int)((cmd)&0xff) >= IOCTL_MIN && \
		(u_int)((cmd)&0xff) <= IOCTL_MAX)

#define	CONTROLDEV	"/dev/si_control"