freebsd-nq/sys/dev/netmap/netmap_generic.c

839 lines
23 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013-2014 Universita` di Pisa. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This module implements netmap support on top of standard,
* unmodified device drivers.
*
* A NIOCREGIF request is handled here if the device does not
* have native support. TX and RX rings are emulated as follows:
*
* NIOCREGIF
* We preallocate a block of TX mbufs (roughly as many as
* tx descriptors; the number is not critical) to speed up
* operation during transmissions. The refcount on most of
* these buffers is artificially bumped up so we can recycle
* them more easily. Also, the destructor is intercepted
* so we use it as an interrupt notification to wake up
* processes blocked on a poll().
*
* For each receive ring we allocate one "struct mbq"
* (an mbuf tailq plus a spinlock). We intercept packets
* (through if_input)
* on the receive path and put them in the mbq from which
* netmap receive routines can grab them.
*
* TX:
* in the generic_txsync() routine, netmap buffers are copied
* (or linked, in a future) to the preallocated mbufs
* and pushed to the transmit queue. Some of these mbufs
* (those with NS_REPORT, or otherwise every half ring)
* have the refcount=1, others have refcount=2.
* When the destructor is invoked, we take that as
* a notification that all mbufs up to that one in
* the specific ring have been completed, and generate
* the equivalent of a transmit interrupt.
*
* RX:
*
*/
#ifdef __FreeBSD__
#include <sys/cdefs.h> /* prerequisite */
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/malloc.h>
#include <sys/lock.h> /* PROT_EXEC */
#include <sys/rwlock.h>
#include <sys/socket.h> /* sockaddrs */
#include <sys/selinfo.h>
#include <net/if.h>
#include <net/if_var.h>
#include <machine/bus.h> /* bus_dmamap_* in netmap_kern.h */
// XXX temporary - D() defined here
#include <net/netmap.h>
#include <dev/netmap/netmap_kern.h>
#include <dev/netmap/netmap_mem2.h>
#define rtnl_lock() ND("rtnl_lock called")
#define rtnl_unlock() ND("rtnl_unlock called")
#define MBUF_TXQ(m) ((m)->m_pkthdr.flowid)
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
#define MBUF_RXQ(m) ((m)->m_pkthdr.flowid)
#define smp_mb()
/*
* FreeBSD mbuf allocator/deallocator in emulation mode:
*
* We allocate EXT_PACKET mbuf+clusters, but need to set M_NOFREE
* so that the destructor, if invoked, will not free the packet.
* In principle we should set the destructor only on demand,
* but since there might be a race we better do it on allocation.
* As a consequence, we also need to set the destructor or we
* would leak buffers.
*/
/*
* mbuf wrappers
*/
/* mbuf destructor, also need to change the type to EXT_EXTREF,
* add an M_NOFREE flag, and then clear the flag and
* chain into uma_zfree(zone_pack, mf)
* (or reinstall the buffer ?)
*/
#define SET_MBUF_DESTRUCTOR(m, fn) do { \
(m)->m_ext.ext_free = (void *)fn; \
(m)->m_ext.ext_type = EXT_EXTREF; \
} while (0)
static void
netmap_default_mbuf_destructor(struct mbuf *m)
{
/* restore original mbuf */
m->m_ext.ext_buf = m->m_data = m->m_ext.ext_arg1;
m->m_ext.ext_arg1 = NULL;
m->m_ext.ext_type = EXT_PACKET;
m->m_ext.ext_free = NULL;
if (*(m->m_ext.ref_cnt) == 0)
*(m->m_ext.ref_cnt) = 1;
uma_zfree(zone_pack, m);
}
static inline struct mbuf *
netmap_get_mbuf(int len)
{
struct mbuf *m;
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR | M_NOFREE);
if (m) {
m->m_ext.ext_arg1 = m->m_ext.ext_buf; // XXX save
m->m_ext.ext_free = (void *)netmap_default_mbuf_destructor;
m->m_ext.ext_type = EXT_EXTREF;
ND(5, "create m %p refcnt %d", m, *m->m_ext.ref_cnt);
}
return m;
}
#define GET_MBUF_REFCNT(m) ((m)->m_ext.ref_cnt ? *(m)->m_ext.ref_cnt : -1)
#else /* linux */
#include "bsd_glue.h"
#include <linux/rtnetlink.h> /* rtnl_[un]lock() */
#include <linux/ethtool.h> /* struct ethtool_ops, get_ringparam */
#include <linux/hrtimer.h>
//#define RATE /* Enables communication statistics. */
//#define REG_RESET
#endif /* linux */
/* Common headers. */
#include <net/netmap.h>
#include <dev/netmap/netmap_kern.h>
#include <dev/netmap/netmap_mem2.h>
/* ======================== usage stats =========================== */
#ifdef RATE
#define IFRATE(x) x
struct rate_stats {
unsigned long txpkt;
unsigned long txsync;
unsigned long txirq;
unsigned long rxpkt;
unsigned long rxirq;
unsigned long rxsync;
};
struct rate_context {
unsigned refcount;
struct timer_list timer;
struct rate_stats new;
struct rate_stats old;
};
#define RATE_PRINTK(_NAME_) \
printk( #_NAME_ " = %lu Hz\n", (cur._NAME_ - ctx->old._NAME_)/RATE_PERIOD);
#define RATE_PERIOD 2
static void rate_callback(unsigned long arg)
{
struct rate_context * ctx = (struct rate_context *)arg;
struct rate_stats cur = ctx->new;
int r;
RATE_PRINTK(txpkt);
RATE_PRINTK(txsync);
RATE_PRINTK(txirq);
RATE_PRINTK(rxpkt);
RATE_PRINTK(rxsync);
RATE_PRINTK(rxirq);
printk("\n");
ctx->old = cur;
r = mod_timer(&ctx->timer, jiffies +
msecs_to_jiffies(RATE_PERIOD * 1000));
if (unlikely(r))
D("[v1000] Error: mod_timer()");
}
static struct rate_context rate_ctx;
#else /* !RATE */
#define IFRATE(x)
#endif /* !RATE */
/* =============== GENERIC NETMAP ADAPTER SUPPORT ================= */
#define GENERIC_BUF_SIZE netmap_buf_size /* Size of the mbufs in the Tx pool. */
/*
* Wrapper used by the generic adapter layer to notify
* the poller threads. Differently from netmap_rx_irq(), we check
* only IFCAP_NETMAP instead of NAF_NATIVE_ON to enable the irq.
*/
static void
netmap_generic_irq(struct ifnet *ifp, u_int q, u_int *work_done)
{
if (unlikely(!(ifp->if_capenable & IFCAP_NETMAP)))
return;
netmap_common_irq(ifp, q, work_done);
}
/* Enable/disable netmap mode for a generic network interface. */
static int
generic_netmap_register(struct netmap_adapter *na, int enable)
{
struct ifnet *ifp = na->ifp;
struct netmap_generic_adapter *gna = (struct netmap_generic_adapter *)na;
struct mbuf *m;
int error;
int i, r;
if (!na)
return EINVAL;
#ifdef REG_RESET
error = ifp->netdev_ops->ndo_stop(ifp);
if (error) {
return error;
}
#endif /* REG_RESET */
if (enable) { /* Enable netmap mode. */
/* Init the mitigation support on all the rx queues. */
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
gna->mit = malloc(na->num_rx_rings * sizeof(struct nm_generic_mit),
M_DEVBUF, M_NOWAIT | M_ZERO);
if (!gna->mit) {
D("mitigation allocation failed");
error = ENOMEM;
goto out;
}
for (r=0; r<na->num_rx_rings; r++)
netmap_mitigation_init(&gna->mit[r], na);
/* Initialize the rx queue, as generic_rx_handler() can
* be called as soon as netmap_catch_rx() returns.
*/
for (r=0; r<na->num_rx_rings; r++) {
mbq_safe_init(&na->rx_rings[r].rx_queue);
}
/*
* Preallocate packet buffers for the tx rings.
*/
for (r=0; r<na->num_tx_rings; r++)
na->tx_rings[r].tx_pool = NULL;
for (r=0; r<na->num_tx_rings; r++) {
na->tx_rings[r].tx_pool = malloc(na->num_tx_desc * sizeof(struct mbuf *),
M_DEVBUF, M_NOWAIT | M_ZERO);
if (!na->tx_rings[r].tx_pool) {
D("tx_pool allocation failed");
error = ENOMEM;
goto free_tx_pools;
}
for (i=0; i<na->num_tx_desc; i++)
na->tx_rings[r].tx_pool[i] = NULL;
for (i=0; i<na->num_tx_desc; i++) {
m = netmap_get_mbuf(GENERIC_BUF_SIZE);
if (!m) {
D("tx_pool[%d] allocation failed", i);
error = ENOMEM;
goto free_tx_pools;
}
na->tx_rings[r].tx_pool[i] = m;
}
}
rtnl_lock();
/* Prepare to intercept incoming traffic. */
error = netmap_catch_rx(na, 1);
if (error) {
D("netdev_rx_handler_register() failed (%d)", error);
goto register_handler;
}
ifp->if_capenable |= IFCAP_NETMAP;
/* Make netmap control the packet steering. */
netmap_catch_tx(gna, 1);
rtnl_unlock();
#ifdef RATE
if (rate_ctx.refcount == 0) {
D("setup_timer()");
memset(&rate_ctx, 0, sizeof(rate_ctx));
setup_timer(&rate_ctx.timer, &rate_callback, (unsigned long)&rate_ctx);
if (mod_timer(&rate_ctx.timer, jiffies + msecs_to_jiffies(1500))) {
D("Error: mod_timer()");
}
}
rate_ctx.refcount++;
#endif /* RATE */
} else if (na->tx_rings[0].tx_pool) {
/* Disable netmap mode. We enter here only if the previous
generic_netmap_register(na, 1) was successfull.
If it was not, na->tx_rings[0].tx_pool was set to NULL by the
error handling code below. */
rtnl_lock();
ifp->if_capenable &= ~IFCAP_NETMAP;
/* Release packet steering control. */
netmap_catch_tx(gna, 0);
/* Do not intercept packets on the rx path. */
netmap_catch_rx(na, 0);
rtnl_unlock();
/* Free the mbufs going to the netmap rings */
for (r=0; r<na->num_rx_rings; r++) {
mbq_safe_purge(&na->rx_rings[r].rx_queue);
mbq_safe_destroy(&na->rx_rings[r].rx_queue);
}
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
for (r=0; r<na->num_rx_rings; r++)
netmap_mitigation_cleanup(&gna->mit[r]);
free(gna->mit, M_DEVBUF);
for (r=0; r<na->num_tx_rings; r++) {
for (i=0; i<na->num_tx_desc; i++) {
m_freem(na->tx_rings[r].tx_pool[i]);
}
free(na->tx_rings[r].tx_pool, M_DEVBUF);
}
#ifdef RATE
if (--rate_ctx.refcount == 0) {
D("del_timer()");
del_timer(&rate_ctx.timer);
}
#endif
}
#ifdef REG_RESET
error = ifp->netdev_ops->ndo_open(ifp);
if (error) {
goto free_tx_pools;
}
#endif
return 0;
register_handler:
rtnl_unlock();
free_tx_pools:
for (r=0; r<na->num_tx_rings; r++) {
if (na->tx_rings[r].tx_pool == NULL)
continue;
for (i=0; i<na->num_tx_desc; i++)
if (na->tx_rings[r].tx_pool[i])
m_freem(na->tx_rings[r].tx_pool[i]);
free(na->tx_rings[r].tx_pool, M_DEVBUF);
na->tx_rings[r].tx_pool = NULL;
}
for (r=0; r<na->num_rx_rings; r++) {
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
netmap_mitigation_cleanup(&gna->mit[r]);
mbq_safe_destroy(&na->rx_rings[r].rx_queue);
}
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
free(gna->mit, M_DEVBUF);
out:
return error;
}
/*
* Callback invoked when the device driver frees an mbuf used
* by netmap to transmit a packet. This usually happens when
* the NIC notifies the driver that transmission is completed.
*/
static void
generic_mbuf_destructor(struct mbuf *m)
{
netmap_generic_irq(MBUF_IFP(m), MBUF_TXQ(m), NULL);
#ifdef __FreeBSD__
if (netmap_verbose)
RD(5, "Tx irq (%p) queue %d index %d" , m, MBUF_TXQ(m), (int)(uintptr_t)m->m_ext.ext_arg1);
netmap_default_mbuf_destructor(m);
#endif /* __FreeBSD__ */
IFRATE(rate_ctx.new.txirq++);
}
/* Record completed transmissions and update hwtail.
*
* The oldest tx buffer not yet completed is at nr_hwtail + 1,
* nr_hwcur is the first unsent buffer.
*/
static u_int
generic_netmap_tx_clean(struct netmap_kring *kring)
{
u_int const lim = kring->nkr_num_slots - 1;
u_int nm_i = nm_next(kring->nr_hwtail, lim);
u_int hwcur = kring->nr_hwcur;
u_int n = 0;
struct mbuf **tx_pool = kring->tx_pool;
while (nm_i != hwcur) { /* buffers not completed */
struct mbuf *m = tx_pool[nm_i];
if (unlikely(m == NULL)) {
/* this is done, try to replenish the entry */
tx_pool[nm_i] = m = netmap_get_mbuf(GENERIC_BUF_SIZE);
if (unlikely(m == NULL)) {
D("mbuf allocation failed, XXX error");
// XXX how do we proceed ? break ?
return -ENOMEM;
}
} else if (GET_MBUF_REFCNT(m) != 1) {
break; /* This mbuf is still busy: its refcnt is 2. */
}
n++;
nm_i = nm_next(nm_i, lim);
}
kring->nr_hwtail = nm_prev(nm_i, lim);
ND("tx completed [%d] -> hwtail %d", n, kring->nr_hwtail);
return n;
}
/*
* We have pending packets in the driver between nr_hwtail +1 and hwcur.
* Compute a position in the middle, to be used to generate
* a notification.
*/
static inline u_int
generic_tx_event_middle(struct netmap_kring *kring, u_int hwcur)
{
u_int n = kring->nkr_num_slots;
u_int ntc = nm_next(kring->nr_hwtail, n-1);
u_int e;
if (hwcur >= ntc) {
e = (hwcur + ntc) / 2;
} else { /* wrap around */
e = (hwcur + n + ntc) / 2;
if (e >= n) {
e -= n;
}
}
if (unlikely(e >= n)) {
D("This cannot happen");
e = 0;
}
return e;
}
/*
* We have pending packets in the driver between nr_hwtail+1 and hwcur.
* Schedule a notification approximately in the middle of the two.
* There is a race but this is only called within txsync which does
* a double check.
*/
static void
generic_set_tx_event(struct netmap_kring *kring, u_int hwcur)
{
struct mbuf *m;
u_int e;
if (nm_next(kring->nr_hwtail, kring->nkr_num_slots -1) == hwcur) {
return; /* all buffers are free */
}
e = generic_tx_event_middle(kring, hwcur);
m = kring->tx_pool[e];
ND(5, "Request Event at %d mbuf %p refcnt %d", e, m, m ? GET_MBUF_REFCNT(m) : -2 );
if (m == NULL) {
/* This can happen if there is already an event on the netmap
slot 'e': There is nothing to do. */
return;
}
kring->tx_pool[e] = NULL;
SET_MBUF_DESTRUCTOR(m, generic_mbuf_destructor);
// XXX wmb() ?
/* Decrement the refcount an free it if we have the last one. */
m_freem(m);
smp_mb();
}
/*
* generic_netmap_txsync() transforms netmap buffers into mbufs
* and passes them to the standard device driver
* (ndo_start_xmit() or ifp->if_transmit() ).
* On linux this is not done directly, but using dev_queue_xmit(),
* since it implements the TX flow control (and takes some locks).
*/
static int
generic_netmap_txsync(struct netmap_adapter *na, u_int ring_nr, int flags)
{
struct ifnet *ifp = na->ifp;
struct netmap_kring *kring = &na->tx_rings[ring_nr];
struct netmap_ring *ring = kring->ring;
u_int nm_i; /* index into the netmap ring */ // j
u_int const lim = kring->nkr_num_slots - 1;
u_int const head = kring->rhead;
IFRATE(rate_ctx.new.txsync++);
// TODO: handle the case of mbuf allocation failure
rmb();
/*
* First part: process new packets to send.
*/
nm_i = kring->nr_hwcur;
if (nm_i != head) { /* we have new packets to send */
while (nm_i != head) {
struct netmap_slot *slot = &ring->slot[nm_i];
u_int len = slot->len;
void *addr = NMB(slot);
/* device-specific */
struct mbuf *m;
int tx_ret;
NM_CHECK_ADDR_LEN(addr, len);
/* Tale a mbuf from the tx pool and copy in the user packet. */
m = kring->tx_pool[nm_i];
if (unlikely(!m)) {
RD(5, "This should never happen");
kring->tx_pool[nm_i] = m = netmap_get_mbuf(GENERIC_BUF_SIZE);
if (unlikely(m == NULL)) {
D("mbuf allocation failed");
break;
}
}
/* XXX we should ask notifications when NS_REPORT is set,
* or roughly every half frame. We can optimize this
* by lazily requesting notifications only when a
* transmission fails. Probably the best way is to
* break on failures and set notifications when
* ring->cur == ring->tail || nm_i != cur
*/
tx_ret = generic_xmit_frame(ifp, m, addr, len, ring_nr);
if (unlikely(tx_ret)) {
RD(5, "start_xmit failed: err %d [nm_i %u, head %u, hwtail %u]",
tx_ret, nm_i, head, kring->nr_hwtail);
/*
* No room for this mbuf in the device driver.
* Request a notification FOR A PREVIOUS MBUF,
* then call generic_netmap_tx_clean(kring) to do the
* double check and see if we can free more buffers.
* If there is space continue, else break;
* NOTE: the double check is necessary if the problem
* occurs in the txsync call after selrecord().
* Also, we need some way to tell the caller that not
* all buffers were queued onto the device (this was
* not a problem with native netmap driver where space
* is preallocated). The bridge has a similar problem
* and we solve it there by dropping the excess packets.
*/
generic_set_tx_event(kring, nm_i);
if (generic_netmap_tx_clean(kring)) { /* space now available */
continue;
} else {
break;
}
}
slot->flags &= ~(NS_REPORT | NS_BUF_CHANGED);
nm_i = nm_next(nm_i, lim);
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
IFRATE(rate_ctx.new.txpkt ++);
}
/* Update hwcur to the next slot to transmit. */
kring->nr_hwcur = nm_i; /* not head, we could break early */
}
/*
* Second, reclaim completed buffers
*/
if (flags & NAF_FORCE_RECLAIM || nm_kr_txempty(kring)) {
/* No more available slots? Set a notification event
* on a netmap slot that will be cleaned in the future.
* No doublecheck is performed, since txsync() will be
* called twice by netmap_poll().
*/
generic_set_tx_event(kring, nm_i);
}
ND("tx #%d, hwtail = %d", n, kring->nr_hwtail);
generic_netmap_tx_clean(kring);
nm_txsync_finalize(kring);
return 0;
}
/*
* This handler is registered (through netmap_catch_rx())
* within the attached network interface
* in the RX subsystem, so that every mbuf passed up by
* the driver can be stolen to the network stack.
* Stolen packets are put in a queue where the
* generic_netmap_rxsync() callback can extract them.
*/
void
generic_rx_handler(struct ifnet *ifp, struct mbuf *m)
{
struct netmap_adapter *na = NA(ifp);
struct netmap_generic_adapter *gna = (struct netmap_generic_adapter *)na;
u_int work_done;
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
u_int rr = MBUF_RXQ(m); // receive ring number
if (rr >= na->num_rx_rings) {
rr = rr % na->num_rx_rings; // XXX expensive...
}
/* limit the size of the queue */
if (unlikely(mbq_len(&na->rx_rings[rr].rx_queue) > 1024)) {
m_freem(m);
} else {
mbq_safe_enqueue(&na->rx_rings[rr].rx_queue, m);
}
if (netmap_generic_mit < 32768) {
/* no rx mitigation, pass notification up */
netmap_generic_irq(na->ifp, rr, &work_done);
IFRATE(rate_ctx.new.rxirq++);
} else {
/* same as send combining, filter notification if there is a
* pending timer, otherwise pass it up and start a timer.
*/
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
if (likely(netmap_mitigation_active(&gna->mit[rr]))) {
/* Record that there is some pending work. */
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
gna->mit[rr].mit_pending = 1;
} else {
netmap_generic_irq(na->ifp, rr, &work_done);
IFRATE(rate_ctx.new.rxirq++);
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
netmap_mitigation_start(&gna->mit[rr]);
}
}
}
/*
* generic_netmap_rxsync() extracts mbufs from the queue filled by
* generic_netmap_rx_handler() and puts their content in the netmap
* receive ring.
* Access must be protected because the rx handler is asynchronous,
*/
static int
generic_netmap_rxsync(struct netmap_adapter *na, u_int ring_nr, int flags)
{
struct netmap_kring *kring = &na->rx_rings[ring_nr];
struct netmap_ring *ring = kring->ring;
u_int nm_i; /* index into the netmap ring */ //j,
u_int n;
u_int const lim = kring->nkr_num_slots - 1;
u_int const head = nm_rxsync_prologue(kring);
int force_update = (flags & NAF_FORCE_READ) || kring->nr_kflags & NKR_PENDINTR;
if (head > lim)
return netmap_ring_reinit(kring);
/*
* First part: import newly received packets.
*/
if (netmap_no_pendintr || force_update) {
/* extract buffers from the rx queue, stop at most one
* slot before nr_hwcur (stop_i)
*/
uint16_t slot_flags = kring->nkr_slot_flags;
u_int stop_i = nm_prev(kring->nr_hwcur, lim);
nm_i = kring->nr_hwtail; /* first empty slot in the receive ring */
for (n = 0; nm_i != stop_i; n++) {
int len;
void *addr = NMB(&ring->slot[nm_i]);
struct mbuf *m;
/* we only check the address here on generic rx rings */
if (addr == netmap_buffer_base) { /* Bad buffer */
return netmap_ring_reinit(kring);
}
/*
* Call the locked version of the function.
* XXX Ideally we could grab a batch of mbufs at once
* and save some locking overhead.
*/
m = mbq_safe_dequeue(&kring->rx_queue);
if (!m) /* no more data */
break;
len = MBUF_LEN(m);
m_copydata(m, 0, len, addr);
ring->slot[nm_i].len = len;
ring->slot[nm_i].flags = slot_flags;
m_freem(m);
nm_i = nm_next(nm_i, lim);
}
if (n) {
kring->nr_hwtail = nm_i;
IFRATE(rate_ctx.new.rxpkt += n);
}
kring->nr_kflags &= ~NKR_PENDINTR;
}
// XXX should we invert the order ?
/*
* Second part: skip past packets that userspace has released.
*/
nm_i = kring->nr_hwcur;
if (nm_i != head) {
/* Userspace has released some packets. */
for (n = 0; nm_i != head; n++) {
struct netmap_slot *slot = &ring->slot[nm_i];
slot->flags &= ~NS_BUF_CHANGED;
nm_i = nm_next(nm_i, lim);
}
kring->nr_hwcur = head;
}
/* tell userspace that there might be new packets. */
nm_rxsync_finalize(kring);
IFRATE(rate_ctx.new.rxsync++);
return 0;
}
static void
generic_netmap_dtor(struct netmap_adapter *na)
{
struct ifnet *ifp = na->ifp;
struct netmap_generic_adapter *gna = (struct netmap_generic_adapter*)na;
struct netmap_adapter *prev_na = gna->prev;
if (prev_na != NULL) {
D("Released generic NA %p", gna);
if_rele(na->ifp);
netmap_adapter_put(prev_na);
}
if (ifp != NULL) {
WNA(ifp) = prev_na;
D("Restored native NA %p", prev_na);
na->ifp = NULL;
}
}
/*
* generic_netmap_attach() makes it possible to use netmap on
* a device without native netmap support.
* This is less performant than native support but potentially
* faster than raw sockets or similar schemes.
*
* In this "emulated" mode, netmap rings do not necessarily
* have the same size as those in the NIC. We use a default
* value and possibly override it if the OS has ways to fetch the
* actual configuration.
*/
int
generic_netmap_attach(struct ifnet *ifp)
{
struct netmap_adapter *na;
struct netmap_generic_adapter *gna;
int retval;
u_int num_tx_desc, num_rx_desc;
num_tx_desc = num_rx_desc = netmap_generic_ringsize; /* starting point */
generic_find_num_desc(ifp, &num_tx_desc, &num_rx_desc);
ND("Netmap ring size: TX = %d, RX = %d", num_tx_desc, num_rx_desc);
if (num_tx_desc == 0 || num_rx_desc == 0) {
D("Device has no hw slots (tx %u, rx %u)", num_tx_desc, num_rx_desc);
return EINVAL;
}
gna = malloc(sizeof(*gna), M_DEVBUF, M_NOWAIT | M_ZERO);
if (gna == NULL) {
D("no memory on attach, give up");
return ENOMEM;
}
na = (struct netmap_adapter *)gna;
na->ifp = ifp;
na->num_tx_desc = num_tx_desc;
na->num_rx_desc = num_rx_desc;
na->nm_register = &generic_netmap_register;
na->nm_txsync = &generic_netmap_txsync;
na->nm_rxsync = &generic_netmap_rxsync;
na->nm_dtor = &generic_netmap_dtor;
/* when using generic, IFCAP_NETMAP is set so we force
* NAF_SKIP_INTR to use the regular interrupt handler
*/
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
na->na_flags = NAF_SKIP_INTR | NAF_HOST_RINGS;
ND("[GNA] num_tx_queues(%d), real_num_tx_queues(%d), len(%lu)",
ifp->num_tx_queues, ifp->real_num_tx_queues,
ifp->tx_queue_len);
ND("[GNA] num_rx_queues(%d), real_num_rx_queues(%d)",
ifp->num_rx_queues, ifp->real_num_rx_queues);
generic_find_num_queues(ifp, &na->num_tx_rings, &na->num_rx_rings);
retval = netmap_attach_common(na);
if (retval) {
free(gna, M_DEVBUF);
}
return retval;
}