freebsd-nq/sys/kern/kern_ktrace.c

1029 lines
24 KiB
C
Raw Normal View History

/*-
1994-05-24 10:09:53 +00:00
* Copyright (c) 1989, 1993
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
* The Regents of the University of California.
* Copyright (c) 2005 Robert N. M. Watson
* All rights reserved.
1994-05-24 10:09:53 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_ktrace.c 8.2 (Berkeley) 9/23/93
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ktrace.h"
#include "opt_mac.h"
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
#include <sys/fcntl.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/mutex.h>
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
#include <sys/malloc.h>
#include <sys/mount.h>
1994-05-24 10:09:53 +00:00
#include <sys/namei.h>
#include <sys/priv.h>
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
#include <sys/proc.h>
#include <sys/unistd.h>
1994-05-24 10:09:53 +00:00
#include <sys/vnode.h>
#include <sys/ktrace.h>
#include <sys/sx.h>
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
#include <sys/sysctl.h>
1994-05-24 10:09:53 +00:00
#include <sys/syslog.h>
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
#include <sys/sysproto.h>
1994-05-24 10:09:53 +00:00
#include <security/mac/mac_framework.h>
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
/*
* The ktrace facility allows the tracing of certain key events in user space
* processes, such as system calls, signal delivery, context switches, and
* user generated events using utrace(2). It works by streaming event
* records and data to a vnode associated with the process using the
* ktrace(2) system call. In general, records can be written directly from
* the context that generates the event. One important exception to this is
* during a context switch, where sleeping is not permitted. To handle this
* case, trace events are generated using in-kernel ktr_request records, and
* then delivered to disk at a convenient moment -- either immediately, the
* next traceable event, at system call return, or at process exit.
*
* When dealing with multiple threads or processes writing to the same event
* log, ordering guarantees are weak: specifically, if an event has multiple
* records (i.e., system call enter and return), they may be interlaced with
* records from another event. Process and thread ID information is provided
* in the record, and user applications can de-interlace events if required.
*/
static MALLOC_DEFINE(M_KTRACE, "KTRACE", "KTRACE");
#ifdef KTRACE
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
#ifndef KTRACE_REQUEST_POOL
#define KTRACE_REQUEST_POOL 100
#endif
struct ktr_request {
struct ktr_header ktr_header;
void *ktr_buffer;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
union {
struct ktr_syscall ktr_syscall;
struct ktr_sysret ktr_sysret;
struct ktr_genio ktr_genio;
struct ktr_psig ktr_psig;
struct ktr_csw ktr_csw;
} ktr_data;
STAILQ_ENTRY(ktr_request) ktr_list;
};
static int data_lengths[] = {
0, /* none */
offsetof(struct ktr_syscall, ktr_args), /* KTR_SYSCALL */
sizeof(struct ktr_sysret), /* KTR_SYSRET */
0, /* KTR_NAMEI */
sizeof(struct ktr_genio), /* KTR_GENIO */
sizeof(struct ktr_psig), /* KTR_PSIG */
sizeof(struct ktr_csw), /* KTR_CSW */
0 /* KTR_USER */
};
static STAILQ_HEAD(, ktr_request) ktr_free;
2005-02-10 12:23:29 +00:00
static SYSCTL_NODE(_kern, OID_AUTO, ktrace, CTLFLAG_RD, 0, "KTRACE options");
static u_int ktr_requestpool = KTRACE_REQUEST_POOL;
TUNABLE_INT("kern.ktrace.request_pool", &ktr_requestpool);
static u_int ktr_geniosize = PAGE_SIZE;
TUNABLE_INT("kern.ktrace.genio_size", &ktr_geniosize);
SYSCTL_UINT(_kern_ktrace, OID_AUTO, genio_size, CTLFLAG_RW, &ktr_geniosize,
0, "Maximum size of genio event payload");
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static int print_message = 1;
struct mtx ktrace_mtx;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
static struct sx ktrace_sx;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static void ktrace_init(void *dummy);
static int sysctl_kern_ktrace_request_pool(SYSCTL_HANDLER_ARGS);
static u_int ktrace_resize_pool(u_int newsize);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static struct ktr_request *ktr_getrequest(int type);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
static void ktr_submitrequest(struct thread *td, struct ktr_request *req);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static void ktr_freerequest(struct ktr_request *req);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
static void ktr_writerequest(struct thread *td, struct ktr_request *req);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static int ktrcanset(struct thread *,struct proc *);
static int ktrsetchildren(struct thread *,struct proc *,int,int,struct vnode *);
static int ktrops(struct thread *,struct proc *,int,int,struct vnode *);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
/*
* ktrace itself generates events, such as context switches, which we do not
* wish to trace. Maintain a flag, TDP_INKTRACE, on each thread to determine
* whether or not it is in a region where tracing of events should be
* suppressed.
*/
static void
ktrace_enter(struct thread *td)
{
KASSERT(!(td->td_pflags & TDP_INKTRACE), ("ktrace_enter: flag set"));
td->td_pflags |= TDP_INKTRACE;
}
static void
ktrace_exit(struct thread *td)
{
KASSERT(td->td_pflags & TDP_INKTRACE, ("ktrace_exit: flag not set"));
td->td_pflags &= ~TDP_INKTRACE;
}
static void
ktrace_assert(struct thread *td)
{
KASSERT(td->td_pflags & TDP_INKTRACE, ("ktrace_assert: flag not set"));
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static void
ktrace_init(void *dummy)
{
struct ktr_request *req;
int i;
mtx_init(&ktrace_mtx, "ktrace", NULL, MTX_DEF | MTX_QUIET);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
sx_init(&ktrace_sx, "ktrace_sx");
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
STAILQ_INIT(&ktr_free);
for (i = 0; i < ktr_requestpool; i++) {
req = malloc(sizeof(struct ktr_request), M_KTRACE, M_WAITOK);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
STAILQ_INSERT_HEAD(&ktr_free, req, ktr_list);
}
}
SYSINIT(ktrace_init, SI_SUB_KTRACE, SI_ORDER_ANY, ktrace_init, NULL);
static int
sysctl_kern_ktrace_request_pool(SYSCTL_HANDLER_ARGS)
{
struct thread *td;
u_int newsize, oldsize, wantsize;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
int error;
/* Handle easy read-only case first to avoid warnings from GCC. */
if (!req->newptr) {
mtx_lock(&ktrace_mtx);
oldsize = ktr_requestpool;
mtx_unlock(&ktrace_mtx);
return (SYSCTL_OUT(req, &oldsize, sizeof(u_int)));
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
}
error = SYSCTL_IN(req, &wantsize, sizeof(u_int));
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (error)
return (error);
td = curthread;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_enter(td);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_lock(&ktrace_mtx);
oldsize = ktr_requestpool;
newsize = ktrace_resize_pool(wantsize);
mtx_unlock(&ktrace_mtx);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
error = SYSCTL_OUT(req, &oldsize, sizeof(u_int));
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (error)
return (error);
if (wantsize > oldsize && newsize < wantsize)
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
return (ENOSPC);
return (0);
}
SYSCTL_PROC(_kern_ktrace, OID_AUTO, request_pool, CTLTYPE_UINT|CTLFLAG_RW,
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
&ktr_requestpool, 0, sysctl_kern_ktrace_request_pool, "IU", "");
static u_int
ktrace_resize_pool(u_int newsize)
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
{
struct ktr_request *req;
int bound;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_assert(&ktrace_mtx, MA_OWNED);
print_message = 1;
bound = newsize - ktr_requestpool;
if (bound == 0)
return (ktr_requestpool);
if (bound < 0)
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
/* Shrink pool down to newsize if possible. */
while (bound++ < 0) {
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = STAILQ_FIRST(&ktr_free);
if (req == NULL)
return (ktr_requestpool);
STAILQ_REMOVE_HEAD(&ktr_free, ktr_list);
ktr_requestpool--;
mtx_unlock(&ktrace_mtx);
free(req, M_KTRACE);
mtx_lock(&ktrace_mtx);
}
else
/* Grow pool up to newsize. */
while (bound-- > 0) {
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_unlock(&ktrace_mtx);
req = malloc(sizeof(struct ktr_request), M_KTRACE,
M_WAITOK);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_lock(&ktrace_mtx);
STAILQ_INSERT_HEAD(&ktr_free, req, ktr_list);
ktr_requestpool++;
}
return (ktr_requestpool);
}
static struct ktr_request *
ktr_getrequest(int type)
{
struct ktr_request *req;
struct thread *td = curthread;
struct proc *p = td->td_proc;
int pm;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_enter(td); /* XXX: In caller instead? */
mtx_lock(&ktrace_mtx);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (!KTRCHECK(td, type)) {
mtx_unlock(&ktrace_mtx);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
return (NULL);
}
req = STAILQ_FIRST(&ktr_free);
if (req != NULL) {
STAILQ_REMOVE_HEAD(&ktr_free, ktr_list);
req->ktr_header.ktr_type = type;
if (p->p_traceflag & KTRFAC_DROP) {
req->ktr_header.ktr_type |= KTR_DROP;
p->p_traceflag &= ~KTRFAC_DROP;
}
mtx_unlock(&ktrace_mtx);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
microtime(&req->ktr_header.ktr_time);
req->ktr_header.ktr_pid = p->p_pid;
req->ktr_header.ktr_tid = td->td_tid;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
bcopy(p->p_comm, req->ktr_header.ktr_comm, MAXCOMLEN + 1);
req->ktr_buffer = NULL;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req->ktr_header.ktr_len = 0;
} else {
p->p_traceflag |= KTRFAC_DROP;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
pm = print_message;
print_message = 0;
mtx_unlock(&ktrace_mtx);
if (pm)
printf("Out of ktrace request objects.\n");
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
}
return (req);
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
/*
* Some trace generation environments don't permit direct access to VFS,
* such as during a context switch where sleeping is not allowed. Under these
* circumstances, queue a request to the thread to be written asynchronously
* later.
*/
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static void
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_enqueuerequest(struct thread *td, struct ktr_request *req)
1994-05-24 10:09:53 +00:00
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_lock(&ktrace_mtx);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
STAILQ_INSERT_TAIL(&td->td_proc->p_ktr, req, ktr_list);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_unlock(&ktrace_mtx);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
/*
* Drain any pending ktrace records from the per-thread queue to disk. This
* is used both internally before committing other records, and also on
* system call return. We drain all the ones we can find at the time when
* drain is requested, but don't keep draining after that as those events
* may me approximately "after" the current event.
*/
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static void
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_drain(struct thread *td)
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
{
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
struct ktr_request *queued_req;
STAILQ_HEAD(, ktr_request) local_queue;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_assert(td);
sx_assert(&ktrace_sx, SX_XLOCKED);
STAILQ_INIT(&local_queue); /* XXXRW: needed? */
if (!STAILQ_EMPTY(&td->td_proc->p_ktr)) {
mtx_lock(&ktrace_mtx);
STAILQ_CONCAT(&local_queue, &td->td_proc->p_ktr);
mtx_unlock(&ktrace_mtx);
while ((queued_req = STAILQ_FIRST(&local_queue))) {
STAILQ_REMOVE_HEAD(&local_queue, ktr_list);
ktr_writerequest(td, queued_req);
ktr_freerequest(queued_req);
}
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
/*
* Submit a trace record for immediate commit to disk -- to be used only
* where entering VFS is OK. First drain any pending records that may have
* been cached in the thread.
*/
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
static void
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_submitrequest(struct thread *td, struct ktr_request *req)
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
{
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_assert(td);
sx_xlock(&ktrace_sx);
ktr_drain(td);
ktr_writerequest(td, req);
ktr_freerequest(req);
sx_xunlock(&ktrace_sx);
ktrace_exit(td);
}
static void
ktr_freerequest(struct ktr_request *req)
{
if (req->ktr_buffer != NULL)
free(req->ktr_buffer, M_KTRACE);
mtx_lock(&ktrace_mtx);
STAILQ_INSERT_HEAD(&ktr_free, req, ktr_list);
mtx_unlock(&ktrace_mtx);
1994-05-24 10:09:53 +00:00
}
/*
* MPSAFE
*/
void
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktrsyscall(code, narg, args)
int code, narg;
register_t args[];
1994-05-24 10:09:53 +00:00
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
struct ktr_syscall *ktp;
size_t buflen;
char *buf = NULL;
1994-05-24 10:09:53 +00:00
buflen = sizeof(register_t) * narg;
if (buflen > 0) {
buf = malloc(buflen, M_KTRACE, M_WAITOK);
bcopy(args, buf, buflen);
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_SYSCALL);
if (req == NULL) {
if (buf != NULL)
free(buf, M_KTRACE);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
return;
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktp = &req->ktr_data.ktr_syscall;
1994-05-24 10:09:53 +00:00
ktp->ktr_code = code;
ktp->ktr_narg = narg;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (buflen > 0) {
req->ktr_header.ktr_len = buflen;
req->ktr_buffer = buf;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_submitrequest(curthread, req);
1994-05-24 10:09:53 +00:00
}
/*
* MPSAFE
*/
void
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktrsysret(code, error, retval)
int code, error;
register_t retval;
1994-05-24 10:09:53 +00:00
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
struct ktr_sysret *ktp;
1994-05-24 10:09:53 +00:00
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_SYSRET);
if (req == NULL)
return;
ktp = &req->ktr_data.ktr_sysret;
ktp->ktr_code = code;
ktp->ktr_error = error;
ktp->ktr_retval = retval; /* what about val2 ? */
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_submitrequest(curthread, req);
}
/*
* When a process exits, drain per-process asynchronous trace records.
*/
void
ktrprocexit(struct thread *td)
{
ktrace_enter(td);
sx_xlock(&ktrace_sx);
ktr_drain(td);
sx_xunlock(&ktrace_sx);
ktrace_exit(td);
}
/*
* When a thread returns, drain any asynchronous records generated by the
* system call.
*/
void
ktruserret(struct thread *td)
{
ktrace_enter(td);
sx_xlock(&ktrace_sx);
ktr_drain(td);
sx_xunlock(&ktrace_sx);
ktrace_exit(td);
1994-05-24 10:09:53 +00:00
}
void
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktrnamei(path)
1994-05-24 10:09:53 +00:00
char *path;
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
int namelen;
char *buf = NULL;
1994-05-24 10:09:53 +00:00
namelen = strlen(path);
if (namelen > 0) {
buf = malloc(namelen, M_KTRACE, M_WAITOK);
bcopy(path, buf, namelen);
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_NAMEI);
if (req == NULL) {
if (buf != NULL)
free(buf, M_KTRACE);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
return;
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (namelen > 0) {
req->ktr_header.ktr_len = namelen;
req->ktr_buffer = buf;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_submitrequest(curthread, req);
1994-05-24 10:09:53 +00:00
}
void
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktrgenio(fd, rw, uio, error)
1994-05-24 10:09:53 +00:00
int fd;
enum uio_rw rw;
struct uio *uio;
int error;
1994-05-24 10:09:53 +00:00
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
struct ktr_genio *ktg;
int datalen;
char *buf;
1995-05-30 08:16:23 +00:00
if (error) {
free(uio, M_IOV);
1994-05-24 10:09:53 +00:00
return;
}
uio->uio_offset = 0;
uio->uio_rw = UIO_WRITE;
datalen = imin(uio->uio_resid, ktr_geniosize);
buf = malloc(datalen, M_KTRACE, M_WAITOK);
error = uiomove(buf, datalen, uio);
free(uio, M_IOV);
if (error) {
free(buf, M_KTRACE);
return;
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_GENIO);
if (req == NULL) {
free(buf, M_KTRACE);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
return;
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktg = &req->ktr_data.ktr_genio;
ktg->ktr_fd = fd;
ktg->ktr_rw = rw;
req->ktr_header.ktr_len = datalen;
req->ktr_buffer = buf;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_submitrequest(curthread, req);
1994-05-24 10:09:53 +00:00
}
void
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktrpsig(sig, action, mask, code)
1999-10-04 18:29:51 +00:00
int sig;
1994-05-24 10:09:53 +00:00
sig_t action;
sigset_t *mask;
1999-10-04 18:29:51 +00:00
int code;
1994-05-24 10:09:53 +00:00
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
struct ktr_psig *kp;
1994-05-24 10:09:53 +00:00
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_PSIG);
if (req == NULL)
return;
kp = &req->ktr_data.ktr_psig;
kp->signo = (char)sig;
kp->action = action;
kp->mask = *mask;
kp->code = code;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_enqueuerequest(curthread, req);
1994-05-24 10:09:53 +00:00
}
void
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
ktrcsw(out, user)
1994-05-24 10:09:53 +00:00
int out, user;
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
struct ktr_csw *kc;
1994-05-24 10:09:53 +00:00
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_CSW);
if (req == NULL)
return;
kc = &req->ktr_data.ktr_csw;
kc->out = out;
kc->user = user;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_enqueuerequest(curthread, req);
1994-05-24 10:09:53 +00:00
}
#endif /* KTRACE */
1994-05-24 10:09:53 +00:00
/* Interface and common routines */
/*
* ktrace system call
*
* MPSAFE
1994-05-24 10:09:53 +00:00
*/
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct ktrace_args {
char *fname;
int ops;
int facs;
int pid;
};
#endif
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
ktrace(td, uap)
struct thread *td;
1994-05-24 10:09:53 +00:00
register struct ktrace_args *uap;
{
#ifdef KTRACE
1994-05-24 10:09:53 +00:00
register struct vnode *vp = NULL;
register struct proc *p;
struct pgrp *pg;
int facs = uap->facs & ~KTRFAC_ROOT;
int ops = KTROP(uap->ops);
int descend = uap->ops & KTRFLAG_DESCEND;
int nfound, ret = 0;
int flags, error = 0, vfslocked;
1994-05-24 10:09:53 +00:00
struct nameidata nd;
struct ucred *cred;
1994-05-24 10:09:53 +00:00
/*
* Need something to (un)trace.
*/
if (ops != KTROP_CLEARFILE && facs == 0)
return (EINVAL);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_enter(td);
1994-05-24 10:09:53 +00:00
if (ops != KTROP_CLEAR) {
/*
* an operation which requires a file argument.
*/
NDINIT(&nd, LOOKUP, NOFOLLOW | MPSAFE, UIO_USERSPACE,
uap->fname, td);
flags = FREAD | FWRITE | O_NOFOLLOW;
error = vn_open(&nd, &flags, 0, -1);
if (error) {
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
1994-05-24 10:09:53 +00:00
return (error);
}
vfslocked = NDHASGIANT(&nd);
NDFREE(&nd, NDF_ONLY_PNBUF);
1994-05-24 10:09:53 +00:00
vp = nd.ni_vp;
VOP_UNLOCK(vp, 0, td);
1994-05-24 10:09:53 +00:00
if (vp->v_type != VREG) {
(void) vn_close(vp, FREAD|FWRITE, td->td_ucred, td);
VFS_UNLOCK_GIANT(vfslocked);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
1994-05-24 10:09:53 +00:00
return (EACCES);
}
VFS_UNLOCK_GIANT(vfslocked);
1994-05-24 10:09:53 +00:00
}
/*
* Clear all uses of the tracefile.
1994-05-24 10:09:53 +00:00
*/
if (ops == KTROP_CLEARFILE) {
int vrele_count;
vrele_count = 0;
sx_slock(&allproc_lock);
FOREACH_PROC_IN_SYSTEM(p) {
PROC_LOCK(p);
if (p->p_tracevp == vp) {
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (ktrcanset(td, p)) {
mtx_lock(&ktrace_mtx);
cred = p->p_tracecred;
p->p_tracecred = NULL;
p->p_tracevp = NULL;
1994-05-24 10:09:53 +00:00
p->p_traceflag = 0;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_unlock(&ktrace_mtx);
vrele_count++;
crfree(cred);
} else
1994-05-24 10:09:53 +00:00
error = EPERM;
}
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
}
sx_sunlock(&allproc_lock);
if (vrele_count > 0) {
vfslocked = VFS_LOCK_GIANT(vp->v_mount);
while (vrele_count-- > 0)
vrele(vp);
VFS_UNLOCK_GIANT(vfslocked);
}
1994-05-24 10:09:53 +00:00
goto done;
}
1995-05-30 08:16:23 +00:00
/*
1994-05-24 10:09:53 +00:00
* do it
*/
sx_slock(&proctree_lock);
1994-05-24 10:09:53 +00:00
if (uap->pid < 0) {
/*
* by process group
*/
pg = pgfind(-uap->pid);
if (pg == NULL) {
sx_sunlock(&proctree_lock);
1994-05-24 10:09:53 +00:00
error = ESRCH;
goto done;
}
/*
* ktrops() may call vrele(). Lock pg_members
* by the proctree_lock rather than pg_mtx.
*/
PGRP_UNLOCK(pg);
nfound = 0;
LIST_FOREACH(p, &pg->pg_members, p_pglist) {
PROC_LOCK(p);
if (p_cansee(td, p) != 0) {
PROC_UNLOCK(p);
continue;
}
PROC_UNLOCK(p);
nfound++;
1994-05-24 10:09:53 +00:00
if (descend)
ret |= ktrsetchildren(td, p, ops, facs, vp);
1995-05-30 08:16:23 +00:00
else
ret |= ktrops(td, p, ops, facs, vp);
}
if (nfound == 0) {
sx_sunlock(&proctree_lock);
error = ESRCH;
goto done;
}
1994-05-24 10:09:53 +00:00
} else {
/*
* by pid
*/
p = pfind(uap->pid);
if (p == NULL) {
sx_sunlock(&proctree_lock);
1994-05-24 10:09:53 +00:00
error = ESRCH;
goto done;
}
error = p_cansee(td, p);
/*
* The slock of the proctree lock will keep this process
* from going away, so unlocking the proc here is ok.
*/
PROC_UNLOCK(p);
if (error) {
sx_sunlock(&proctree_lock);
goto done;
}
1994-05-24 10:09:53 +00:00
if (descend)
ret |= ktrsetchildren(td, p, ops, facs, vp);
1994-05-24 10:09:53 +00:00
else
ret |= ktrops(td, p, ops, facs, vp);
1994-05-24 10:09:53 +00:00
}
sx_sunlock(&proctree_lock);
1994-05-24 10:09:53 +00:00
if (!ret)
error = EPERM;
done:
if (vp != NULL) {
vfslocked = VFS_LOCK_GIANT(vp->v_mount);
(void) vn_close(vp, FWRITE, td->td_ucred, td);
VFS_UNLOCK_GIANT(vfslocked);
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktrace_exit(td);
1994-05-24 10:09:53 +00:00
return (error);
#else /* !KTRACE */
return (ENOSYS);
#endif /* KTRACE */
1994-05-24 10:09:53 +00:00
}
/*
* utrace system call
*
* MPSAFE
*/
/* ARGSUSED */
int
utrace(td, uap)
struct thread *td;
register struct utrace_args *uap;
{
#ifdef KTRACE
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_request *req;
void *cp;
int error;
if (!KTRPOINT(td, KTR_USER))
return (0);
2001-01-08 07:22:06 +00:00
if (uap->len > KTR_USER_MAXLEN)
return (EINVAL);
cp = malloc(uap->len, M_KTRACE, M_WAITOK);
error = copyin(uap->addr, cp, uap->len);
if (error) {
free(cp, M_KTRACE);
return (error);
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
req = ktr_getrequest(KTR_USER);
if (req == NULL) {
free(cp, M_KTRACE);
return (ENOMEM);
}
req->ktr_buffer = cp;
req->ktr_header.ktr_len = uap->len;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_submitrequest(td, req);
return (0);
#else /* !KTRACE */
return (ENOSYS);
#endif /* KTRACE */
}
#ifdef KTRACE
static int
ktrops(td, p, ops, facs, vp)
struct thread *td;
struct proc *p;
1994-05-24 10:09:53 +00:00
int ops, facs;
struct vnode *vp;
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct vnode *tracevp = NULL;
struct ucred *tracecred = NULL;
1994-05-24 10:09:53 +00:00
PROC_LOCK(p);
if (!ktrcanset(td, p)) {
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
return (0);
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_lock(&ktrace_mtx);
1994-05-24 10:09:53 +00:00
if (ops == KTROP_SET) {
if (p->p_tracevp != vp) {
1994-05-24 10:09:53 +00:00
/*
* if trace file already in use, relinquish below
1994-05-24 10:09:53 +00:00
*/
tracevp = p->p_tracevp;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
VREF(vp);
p->p_tracevp = vp;
}
if (p->p_tracecred != td->td_ucred) {
tracecred = p->p_tracecred;
p->p_tracecred = crhold(td->td_ucred);
1994-05-24 10:09:53 +00:00
}
p->p_traceflag |= facs;
if (priv_check_cred(td->td_ucred, PRIV_KTRACE,
SUSER_ALLOWJAIL) == 0)
1994-05-24 10:09:53 +00:00
p->p_traceflag |= KTRFAC_ROOT;
1995-05-30 08:16:23 +00:00
} else {
1994-05-24 10:09:53 +00:00
/* KTROP_CLEAR */
if (((p->p_traceflag &= ~facs) & KTRFAC_MASK) == 0) {
/* no more tracing */
p->p_traceflag = 0;
tracevp = p->p_tracevp;
p->p_tracevp = NULL;
tracecred = p->p_tracecred;
p->p_tracecred = NULL;
1994-05-24 10:09:53 +00:00
}
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_unlock(&ktrace_mtx);
PROC_UNLOCK(p);
if (tracevp != NULL) {
int vfslocked;
vfslocked = VFS_LOCK_GIANT(tracevp->v_mount);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
vrele(tracevp);
VFS_UNLOCK_GIANT(vfslocked);
}
if (tracecred != NULL)
crfree(tracecred);
1994-05-24 10:09:53 +00:00
return (1);
}
static int
ktrsetchildren(td, top, ops, facs, vp)
struct thread *td;
struct proc *top;
1994-05-24 10:09:53 +00:00
int ops, facs;
struct vnode *vp;
{
register struct proc *p;
register int ret = 0;
p = top;
sx_assert(&proctree_lock, SX_LOCKED);
1994-05-24 10:09:53 +00:00
for (;;) {
ret |= ktrops(td, p, ops, facs, vp);
1994-05-24 10:09:53 +00:00
/*
* If this process has children, descend to them next,
* otherwise do any siblings, and if done with this level,
* follow back up the tree (but not past top).
*/
if (!LIST_EMPTY(&p->p_children))
p = LIST_FIRST(&p->p_children);
1994-05-24 10:09:53 +00:00
else for (;;) {
if (p == top)
1994-05-24 10:09:53 +00:00
return (ret);
if (LIST_NEXT(p, p_sibling)) {
p = LIST_NEXT(p, p_sibling);
1994-05-24 10:09:53 +00:00
break;
}
p = p->p_pptr;
1994-05-24 10:09:53 +00:00
}
}
/*NOTREACHED*/
}
static void
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
ktr_writerequest(struct thread *td, struct ktr_request *req)
1994-05-24 10:09:53 +00:00
{
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct ktr_header *kth;
struct vnode *vp;
struct proc *p;
struct ucred *cred;
1994-05-24 10:09:53 +00:00
struct uio auio;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
struct iovec aiov[3];
struct mount *mp;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
int datalen, buflen, vrele_count;
int error, vfslocked;
1994-05-24 10:09:53 +00:00
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
/*
* We hold the vnode and credential for use in I/O in case ktrace is
* disabled on the process as we write out the request.
*
* XXXRW: This is not ideal: we could end up performing a write after
* the vnode has been closed.
*/
mtx_lock(&ktrace_mtx);
vp = td->td_proc->p_tracevp;
if (vp != NULL)
VREF(vp);
cred = td->td_proc->p_tracecred;
if (cred != NULL)
crhold(cred);
mtx_unlock(&ktrace_mtx);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
/*
* If vp is NULL, the vp has been cleared out from under this
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
* request, so just drop it. Make sure the credential and vnode are
* in sync: we should have both or neither.
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
*/
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
if (vp == NULL) {
KASSERT(cred == NULL, ("ktr_writerequest: cred != NULL"));
1994-05-24 10:09:53 +00:00
return;
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
}
KASSERT(cred != NULL, ("ktr_writerequest: cred == NULL"));
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
kth = &req->ktr_header;
datalen = data_lengths[(u_short)kth->ktr_type & ~KTR_DROP];
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
buflen = kth->ktr_len;
1994-05-24 10:09:53 +00:00
auio.uio_iov = &aiov[0];
auio.uio_offset = 0;
auio.uio_segflg = UIO_SYSSPACE;
auio.uio_rw = UIO_WRITE;
aiov[0].iov_base = (caddr_t)kth;
aiov[0].iov_len = sizeof(struct ktr_header);
auio.uio_resid = sizeof(struct ktr_header);
auio.uio_iovcnt = 1;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
auio.uio_td = td;
if (datalen != 0) {
aiov[1].iov_base = (caddr_t)&req->ktr_data;
aiov[1].iov_len = datalen;
auio.uio_resid += datalen;
1994-05-24 10:09:53 +00:00
auio.uio_iovcnt++;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
kth->ktr_len += datalen;
1994-05-24 10:09:53 +00:00
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
if (buflen != 0) {
KASSERT(req->ktr_buffer != NULL, ("ktrace: nothing to write"));
aiov[auio.uio_iovcnt].iov_base = req->ktr_buffer;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
aiov[auio.uio_iovcnt].iov_len = buflen;
auio.uio_resid += buflen;
auio.uio_iovcnt++;
}
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
vfslocked = VFS_LOCK_GIANT(vp->v_mount);
vn_start_write(vp, &mp, V_WAIT);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, td);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
(void)VOP_LEASE(vp, td, cred, LEASE_WRITE);
#ifdef MAC
error = mac_check_vnode_write(cred, NOCRED, vp);
if (error == 0)
#endif
error = VOP_WRITE(vp, &auio, IO_UNIT | IO_APPEND, cred);
VOP_UNLOCK(vp, 0, td);
vn_finished_write(mp);
vrele(vp);
VFS_UNLOCK_GIANT(vfslocked);
1994-05-24 10:09:53 +00:00
if (!error)
return;
/*
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
* If error encountered, give up tracing on this vnode. We defer
* all the vrele()'s on the vnode until after we are finished walking
* the various lists to avoid needlessly holding locks.
1994-05-24 10:09:53 +00:00
*/
log(LOG_NOTICE, "ktrace write failed, errno %d, tracing stopped\n",
error);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
vrele_count = 0;
/*
* First, clear this vnode from being used by any processes in the
* system.
* XXX - If one process gets an EPERM writing to the vnode, should
* we really do this? Other processes might have suitable
* credentials for the operation.
*/
cred = NULL;
sx_slock(&allproc_lock);
FOREACH_PROC_IN_SYSTEM(p) {
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
PROC_LOCK(p);
if (p->p_tracevp == vp) {
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_lock(&ktrace_mtx);
p->p_tracevp = NULL;
1994-05-24 10:09:53 +00:00
p->p_traceflag = 0;
cred = p->p_tracecred;
p->p_tracecred = NULL;
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
mtx_unlock(&ktrace_mtx);
vrele_count++;
1994-05-24 10:09:53 +00:00
}
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
PROC_UNLOCK(p);
if (cred != NULL) {
crfree(cred);
cred = NULL;
}
1994-05-24 10:09:53 +00:00
}
sx_sunlock(&allproc_lock);
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
/*
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
* We can't clear any pending requests in threads that have cached
* them but not yet committed them, as those are per-thread. The
* thread will have to clear it itself on system call return.
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
*/
vfslocked = VFS_LOCK_GIANT(vp->v_mount);
Overhaul the ktrace subsystem a bit. For the most part, the actual vnode operations to dump a ktrace event out to an output file are now handled asychronously by a ktrace worker thread. This enables most ktrace events to not need Giant once p_tracep and p_traceflag are suitably protected by the new ktrace_lock. There is a single todo list of pending ktrace requests. The various ktrace tracepoints allocate a ktrace request object and tack it onto the end of the queue. The ktrace kernel thread grabs requests off the head of the queue and processes them using the trace vnode and credentials of the thread triggering the event. Since we cannot assume that the user memory referenced when doing a ktrgenio() will be valid and since we can't access it from the ktrace worker thread without a bit of hassle anyways, ktrgenio() requests are still handled synchronously. However, in order to ensure that the requests from a given thread still maintain relative order to one another, when a synchronous ktrace event (such as a genio event) is triggered, we still put the request object on the todo list to synchronize with the worker thread. The original thread blocks atomically with putting the item on the queue. When the worker thread comes across an asynchronous request, it wakes up the original thread and then blocks to ensure it doesn't manage to write a later event before the original thread has a chance to write out the synchronous event. When the original thread wakes up, it writes out the synchronous using its own context and then finally wakes the worker thread back up. Yuck. The sychronous events aren't pretty but they do work. Since ktrace events can be triggered in fairly low-level areas (msleep() and cv_wait() for example) the ktrace code is designed to use very few locks when posting an event (currently just the ktrace_mtx lock and the vnode interlock to bump the refcoun on the trace vnode). This also means that we can't allocate a ktrace request object when an event is triggered. Instead, ktrace request objects are allocated from a pre-allocated pool and returned to the pool after a request is serviced. The size of this pool defaults to 100 objects, which is about 13k on an i386 kernel. The size of the pool can be adjusted at compile time via the KTRACE_REQUEST_POOL kernel option, at boot time via the kern.ktrace_request_pool loader tunable, or at runtime via the kern.ktrace_request_pool sysctl. If the pool of request objects is exhausted, then a warning message is printed to the console. The message is rate-limited in that it is only printed once until the size of the pool is adjusted via the sysctl. I have tested all kernel traces but have not tested user traces submitted by utrace(2), though they should work fine in theory. Since a ktrace request has several properties (content of event, trace vnode, details of originating process, credentials for I/O, etc.), I chose to drop the first argument to the various ktrfoo() functions. Currently the functions just assume the event is posted from curthread. If there is a great desire to do so, I suppose I could instead put back the first argument but this time make it a thread pointer instead of a vnode pointer. Also, KTRPOINT() now takes a thread as its first argument instead of a process. This is because the check for a recursive ktrace event is now per-thread instead of process-wide. Tested on: i386 Compiles on: sparc64, alpha
2002-06-07 05:32:59 +00:00
while (vrele_count-- > 0)
vrele(vp);
VFS_UNLOCK_GIANT(vfslocked);
1994-05-24 10:09:53 +00:00
}
/*
* Return true if caller has permission to set the ktracing state
* of target. Essentially, the target can't possess any
* more permissions than the caller. KTRFAC_ROOT signifies that
1995-05-30 08:16:23 +00:00
* root previously set the tracing status on the target process, and
1994-05-24 10:09:53 +00:00
* so, only root may further change it.
*/
static int
ktrcanset(td, targetp)
struct thread *td;
struct proc *targetp;
1994-05-24 10:09:53 +00:00
{
PROC_LOCK_ASSERT(targetp, MA_OWNED);
if (targetp->p_traceflag & KTRFAC_ROOT &&
priv_check_cred(td->td_ucred, PRIV_KTRACE, SUSER_ALLOWJAIL))
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
return (0);
1994-05-24 10:09:53 +00:00
if (p_candebug(td, targetp) != 0)
return (0);
return (1);
1994-05-24 10:09:53 +00:00
}
#endif /* KTRACE */