d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ff2e27e5bb
freebsd-nq/sys/mips/include/param.h

188 lines
5.7 KiB
C
Raw Normal View History

FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* $OpenBSD: param.h,v 1.11 1998/08/30 22:05:35 millert Exp $ */
/*-
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department and Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah Hdr: machparam.h 1.11 89/08/14
* from: @(#)param.h 8.1 (Berkeley) 6/10/93
* JNPR: param.h,v 1.6.2.1 2007/09/10 07:49:36 girish
* $FreeBSD$
*/
Get rid of the _NO_NAMESPACE_POLLUTION kludge by creating an architecture specific include file containing the _ALIGN* stuff which <sys/socket.h> needs.
2009-09-08 20:45:40 +00:00
#ifndef _MIPS_INCLUDE_PARAM_H_
#define _MIPS_INCLUDE_PARAM_H_
#include <machine/_align.h>
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#include <sys/cdefs.h>
#ifdef _KERNEL
o) Use inline functions to access coprocessor 0 registers rather than external ones implemented using assembly. o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate <machine/psl.h> as a result. o) Use intr_*() rather than *intr(), consistently. o) Use register_t instead of u_int in some trap code. o) Merge some more endian-related macros to machine/asm.h from NetBSD. o) Add PTR_LI macro, which loads an address with the correct sign-extension for a pointer. o) Restore interrupts when bailing out due to an excessive IRQ in nexus_setup_intr(). o) Remove unused functions from psraccess.S. o) Enter temporary virtual entries for large memory access into the page tables rather than simply hoping they stay resident in the TLB and we don't need to do a refill for them. o) Abstract out large memory mapping setup/teardown using some macros. o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just like we do when we can use the direct map.
2010-04-17 01:17:31 +00:00
#ifndef _LOCORE
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#include <machine/cpu.h>
#endif
#endif
#define __PCI_REROUTE_INTERRUPT
#ifndef MACHINE
#define MACHINE "mips"
#endif
#ifndef MACHINE_ARCH
Set MACHINE_ARCH based on ABI and endianness. Reviewed by: imp
2010-11-28 04:07:45 +00:00
#if _BYTE_ORDER == _BIG_ENDIAN
#ifdef __mips_n64
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. This makes our naming scheme more closely match other systems and the expectations of much third-party software. MIPS builds which are little-endian should require and exhibit no changes. Big-endian TARGET_ARCHes must be changed: From: To: mipseb mips mipsn32eb mipsn32 mips64eb mips64 An entry has been added to UPDATING and some foot-shooting protection (complete with warnings which should become errors in the near future) to the top-level base system Makefile.
2012-03-29 02:54:35 +00:00
#define MACHINE_ARCH "mips64"
o) Add COMPAT_FREEBSD32 support for MIPS kernels using the n64 ABI with userlands using the o32 ABI. This mostly follows nwhitehorn's lead in implementing COMPAT_FREEBSD32 on powerpc64. o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the 32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit ABIs use a 64-bit time_t. o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS with 32-bit compatibility, then, disable some code which assumes otherwise wrongly when built for MIPS. A more general macro to check in this case would seem like a good idea eventually. If someone adds support for using n32 userland with n64 kernels on MIPS, then they will have to add a variety of flags related to each piece of the ABI that can vary. That's probably the right time to generalize further. o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the freebsd32 compat code. Probably this should be generalized at some point. Reviewed by: gonzo
2012-03-03 08:19:18 +00:00
#ifndef MACHINE_ARCH32
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. This makes our naming scheme more closely match other systems and the expectations of much third-party software. MIPS builds which are little-endian should require and exhibit no changes. Big-endian TARGET_ARCHes must be changed: From: To: mipseb mips mipsn32eb mipsn32 mips64eb mips64 An entry has been added to UPDATING and some foot-shooting protection (complete with warnings which should become errors in the near future) to the top-level base system Makefile.
2012-03-29 02:54:35 +00:00
#define MACHINE_ARCH32 "mips"
o) Add COMPAT_FREEBSD32 support for MIPS kernels using the n64 ABI with userlands using the o32 ABI. This mostly follows nwhitehorn's lead in implementing COMPAT_FREEBSD32 on powerpc64. o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the 32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit ABIs use a 64-bit time_t. o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS with 32-bit compatibility, then, disable some code which assumes otherwise wrongly when built for MIPS. A more general macro to check in this case would seem like a good idea eventually. If someone adds support for using n32 userland with n64 kernels on MIPS, then they will have to add a variety of flags related to each piece of the ABI that can vary. That's probably the right time to generalize further. o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the freebsd32 compat code. Probably this should be generalized at some point. Reviewed by: gonzo
2012-03-03 08:19:18 +00:00
#endif
Set MACHINE_ARCH based on ABI and endianness. Reviewed by: imp
2010-11-28 04:07:45 +00:00
#elif defined(__mips_n32)
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. This makes our naming scheme more closely match other systems and the expectations of much third-party software. MIPS builds which are little-endian should require and exhibit no changes. Big-endian TARGET_ARCHes must be changed: From: To: mipseb mips mipsn32eb mipsn32 mips64eb mips64 An entry has been added to UPDATING and some foot-shooting protection (complete with warnings which should become errors in the near future) to the top-level base system Makefile.
2012-03-29 02:54:35 +00:00
#define MACHINE_ARCH "mipsn32"
Set MACHINE_ARCH based on ABI and endianness. Reviewed by: imp
2010-11-28 04:07:45 +00:00
#else
Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. This makes our naming scheme more closely match other systems and the expectations of much third-party software. MIPS builds which are little-endian should require and exhibit no changes. Big-endian TARGET_ARCHes must be changed: From: To: mipseb mips mipsn32eb mipsn32 mips64eb mips64 An entry has been added to UPDATING and some foot-shooting protection (complete with warnings which should become errors in the near future) to the top-level base system Makefile.
2012-03-29 02:54:35 +00:00
#define MACHINE_ARCH "mips"
Set MACHINE_ARCH based on ABI and endianness. Reviewed by: imp
2010-11-28 04:07:45 +00:00
#endif
#else
#ifdef __mips_n64
#define MACHINE_ARCH "mips64el"
o) Add COMPAT_FREEBSD32 support for MIPS kernels using the n64 ABI with userlands using the o32 ABI. This mostly follows nwhitehorn's lead in implementing COMPAT_FREEBSD32 on powerpc64. o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the 32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit ABIs use a 64-bit time_t. o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS with 32-bit compatibility, then, disable some code which assumes otherwise wrongly when built for MIPS. A more general macro to check in this case would seem like a good idea eventually. If someone adds support for using n32 userland with n64 kernels on MIPS, then they will have to add a variety of flags related to each piece of the ABI that can vary. That's probably the right time to generalize further. o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the freebsd32 compat code. Probably this should be generalized at some point. Reviewed by: gonzo
2012-03-03 08:19:18 +00:00
#ifndef MACHINE_ARCH32
#define MACHINE_ARCH32 "mipsel"
#endif
Set MACHINE_ARCH based on ABI and endianness. Reviewed by: imp
2010-11-28 04:07:45 +00:00
#elif defined(__mips_n32)
#define MACHINE_ARCH "mipsn32el"
#else
#define MACHINE_ARCH "mipsel"
#endif
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif
/*
* OBJFORMAT_NAMES is a comma-separated list of the object formats
* that are supported on the architecture.
*/
#define OBJFORMAT_NAMES "elf"
#define OBJFORMAT_DEFAULT "elf"
#define MID_MACHINE 0 /* None but has to be defined */
#ifdef SMP
This pushes all of JC's patches that I have in place. I am now able to run 32 cores ok.. but I still will hang on buildworld with a NFS problem. I suspect I am missing a patch for the netlogic rge driver. JC check and see if I am missing anything except your core-mask changes Obtained from: JC
2010-05-16 19:43:48 +00:00
#define MAXSMPCPU 32
Add the possibility to specify from kernel configs MAXCPU value. This patch is going to help in cases like mips flavours where you want a more granular support on MAXCPU. No MFC is previewed for this patch. Tested by: pluknet Approved by: re (kib)
2011-07-19 00:37:24 +00:00
#ifndef MAXCPU
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MAXCPU MAXSMPCPU
Add the possibility to specify from kernel configs MAXCPU value. This patch is going to help in cases like mips flavours where you want a more granular support on MAXCPU. No MFC is previewed for this patch. Tested by: pluknet Approved by: re (kib)
2011-07-19 00:37:24 +00:00
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#else
#define MAXSMPCPU 1
#define MAXCPU 1
#endif
Rename VM_NDOMAIN into MAXMEMDOM and move it into machine/param.h in order to match the MAXCPU concept. The change should also be useful for consolidation and consistency. Sponsored by: EMC / Isilon storage division Obtained from: jeff Reviewed by: alc
2013-05-07 22:46:24 +00:00
#ifndef MAXMEMDOM
#define MAXMEMDOM 1
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Round p (pointer or byte index) up to a correctly-aligned value for all
* data types (int, long, ...). The result is u_int and must be cast to
* any desired pointer type.
*/
#define ALIGNBYTES _ALIGNBYTES
#define ALIGN(p) _ALIGN(p)
Cleanup ALIGNED_POINTER: o add to platforms where it was missing (arm, i386, powerpc, sparc64, sun4v) o define as "1" on amd64 and i386 where there is no restriction o make the type returned consistent with ALIGN o remove _ALIGNED_POINTER o make associated comments consistent Reviewed by: bde, imp, marcel Approved by: re (kensmith)
2009-07-05 17:45:48 +00:00
/*
* ALIGNED_POINTER is a boolean macro that checks whether an address
* is valid to fetch data elements of type t from on this architecture.
* This does not reflect the optimal alignment, just the possibility
* (within reasonable limits).
*/
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
#define ALIGNED_POINTER(p, t) ((((unsigned long)(p)) & (sizeof (t) - 1)) == 0)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
Add description and cautionary note regarding CACHE_LINE_SIZE. MFC after: 2 weeks Suggested by: alc
2009-04-19 21:26:36 +00:00
/*
* CACHE_LINE_SIZE is the compile-time maximum cache line size for an
* architecture. It should be used with appropriate caution.
*/
For each architecture, define CACHE_LINE_SHIFT and a derived CACHE_LINE_SIZE constant. These constants are intended to over-estimate the cache line size, and be used at compile-time when a run-time tuning alternative isn't appropriate or available. Defaults for all architectures are 64 bytes, except powerpc where it is 128 bytes (used on G5 systems). MFC after: 2 weeks Discussed on: arch@
2009-04-19 20:19:13 +00:00
#define CACHE_LINE_SHIFT 6
#define CACHE_LINE_SIZE (1 << CACHE_LINE_SHIFT)
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define PAGE_SHIFT 12 /* LOG2(PAGE_SIZE) */
#define PAGE_SIZE (1<<PAGE_SHIFT) /* bytes/page */
#define PAGE_MASK (PAGE_SIZE-1)
#define NPTEPG (PAGE_SIZE/(sizeof (pt_entry_t)))
#define NPDEPG (PAGE_SIZE/(sizeof (pd_entry_t)))
#if defined(__mips_n32) || defined(__mips_n64) /* PHYSADDR_64_BIT */
#define NPTEPGSHIFT 9 /* LOG2(NPTEPG) */
#else
#define NPTEPGSHIFT 10 /* LOG2(NPTEPG) */
#endif
#ifdef __mips_n64
#define NPDEPGSHIFT 9 /* LOG2(NPTEPG) */
#define SEGSHIFT (PAGE_SHIFT + NPTEPGSHIFT + NPDEPGSHIFT)
#define NBSEG (1ul << SEGSHIFT)
#define PDRSHIFT (PAGE_SHIFT + NPTEPGSHIFT)
When attempting to satisfy mmap() requests for superpage alignment on 64-bit MIPS, use superpage rather than physical-segment constants, or we may improperly fail to apply suitable alignment -- yet still allow mmap() to appear to succeed. Reviewed by: sson MFC after: 1 week Sponsored by: DARPA, AFRL
2016-04-30 19:29:03 +00:00
#define PDRSIZE (1ul << PDRSHIFT)
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define PDRMASK ((1 << PDRSHIFT) - 1)
Add 3 level page tables for MIPS in n64. - 32 bit compilation will still use old 2 level page tables - re-arrange pmap code so that adding another level is easier - pmap code for 3 level page tables for n64 - update TLB handler to traverse 3 levels in n64 Reviewed by: jmallett
2010-08-04 14:12:09 +00:00
#else
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define NPDEPGSHIFT 10 /* LOG2(NPTEPG) */
#define SEGSHIFT (PAGE_SHIFT + NPTEPGSHIFT)
#define NBSEG (1 << SEGSHIFT) /* bytes/segment */
#define PDRSHIFT SEGSHIFT /* alias for SEG in 32 bit */
When attempting to satisfy mmap() requests for superpage alignment on 64-bit MIPS, use superpage rather than physical-segment constants, or we may improperly fail to apply suitable alignment -- yet still allow mmap() to appear to succeed. Reviewed by: sson MFC after: 1 week Sponsored by: DARPA, AFRL
2016-04-30 19:29:03 +00:00
#define PDRSIZE (1ul << PDRSHIFT)
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define PDRMASK ((1 << PDRSHIFT) - 1)
Add 3 level page tables for MIPS in n64. - 32 bit compilation will still use old 2 level page tables - re-arrange pmap code so that adding another level is easier - pmap code for 3 level page tables for n64 - update TLB handler to traverse 3 levels in n64 Reviewed by: jmallett
2010-08-04 14:12:09 +00:00
#endif
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define NBPDR (1 << PDRSHIFT) /* bytes/pagedir */
#define SEGMASK (NBSEG - 1) /* byte offset into segment */
Prepare for 3 level page tables for MIPS. - Move page table second level shift and mask to param.h - rename SEGOFSET to SEGMASK - fix values for 64 bit maximum kernel and user addresses.
2010-07-29 20:02:56 +00:00
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define MAXPAGESIZES 1 /* max supported pagesizes */
Add a new sysctl for reporting all of the supported page sizes. Reviewed by: jhb MFC after: 3 weeks
2009-09-18 17:04:57 +00:00
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define MAXDUMPPGS 1 /* xxx: why is this only one? */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
- Enable kernel stack guard page. - Unmap the unused kernel stack page that we cannot use because it is not aligned on a (PAGE_SIZE * 2) boundary.
2010-03-12 07:08:20 +00:00
* The kernel stack needs to be aligned on a (PAGE_SIZE * 2) boundary.
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
*/
Add 3 level page tables for MIPS in n64. - 32 bit compilation will still use old 2 level page tables - re-arrange pmap code so that adding another level is easier - pmap code for 3 level page tables for n64 - update TLB handler to traverse 3 levels in n64 Reviewed by: jmallett
2010-08-04 14:12:09 +00:00
#define KSTACK_PAGES 2 /* kernel stack */
o) Add a VM find-space option, VMFS_TLB_ALIGNED_SPACE, which searches the address space for an address as aligned by the new pmap_align_tlb() function, which is for constraints imposed by the TLB. [1] o) Add a kmem_alloc_nofault_space() function, which acts like kmem_alloc_nofault() but allows the caller to specify which find-space option to use. [1] o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the kernel stack address on MIPS. [1] o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on an odd boundary within the TLB, so that they are suitable for insertion as wired entries and do not have to share a TLB entry with another mapping, assuming they are appropriately-sized. o) Eliminate md_realstack now that the kstack will be appropriately-aligned on MIPS. o) Increase the number of guard pages to 2 so that we retain the proper alignment of the kstack address. Reviewed by: [1] alc X-MFC-after: Making sure alc has not come up with a better interface.
2010-04-18 22:32:07 +00:00
#define KSTACK_GUARD_PAGES 2 /* pages of kstack guard; 0 disables */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
o) Add NPDEPG, like NPTEPG but for PDEs. o) Remove NBPG, PGOFSET and PGSHIFT. Use the standard names. o) Remove some unused macros and move things from param.h to vmparam.h that belong in the latter. (Actually, all of the kernel segment values, virtual addresses, etc., belong in one place, but this is a step in the right direction.)
2010-04-17 07:20:01 +00:00
* Mach derived conversion macros
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
*/
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define round_page(x) (((x) + PAGE_MASK) & ~PAGE_MASK)
#define trunc_page(x) ((x) & ~PAGE_MASK)
o) Add NPDEPG, like NPTEPG but for PDEs. o) Remove NBPG, PGOFSET and PGSHIFT. Use the standard names. o) Remove some unused macros and move things from param.h to vmparam.h that belong in the latter. (Actually, all of the kernel segment values, virtual addresses, etc., belong in one place, but this is a step in the right direction.)
2010-04-17 07:20:01 +00:00
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define atop(x) ((x) >> PAGE_SHIFT)
#define ptoa(x) ((x) << PAGE_SHIFT)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#define pgtok(x) ((x) * (PAGE_SIZE / 1024))
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
Add fueword(9) and casueword(9) functions. They are like fuword(9) and casuword(9), but do not mix value read and indication of fault. I know (or remember) enough assembly to handle x86 and powerpc. For arm, mips and sparc64, implement fueword() and casueword() as wrappers around fuword() and casuword(), which means that the functions cannot distinguish between -1 and fault. On architectures where fueword() and casueword() are native, implement fuword() and casuword() using fueword() and casuword(), to reduce assembly code duplication. Sponsored by: The FreeBSD Foundation Tested by: pho MFC after: 2 weeks (ia64 needs treating)
2014-10-28 15:22:13 +00:00
#ifdef _KERNEL
#define NO_FUEWORD 1
#endif
Get rid of the _NO_NAMESPACE_POLLUTION kludge by creating an architecture specific include file containing the _ALIGN* stuff which <sys/socket.h> needs.
2009-09-08 20:45:40 +00:00
#endif /* !_MIPS_INCLUDE_PARAM_H_ */
Reference in New Issue Copy Permalink