diff --git a/sys/dev/tx/if_tx.c b/sys/dev/tx/if_tx.c index 9b2389919d4d..6d0b19fcc2c0 100644 --- a/sys/dev/tx/if_tx.c +++ b/sys/dev/tx/if_tx.c @@ -159,8 +159,7 @@ static struct epic_type epic_devs[] = { }; static int -epic_probe(dev) - device_t dev; +epic_probe(device_t dev) { struct epic_type *t; @@ -175,8 +174,7 @@ epic_probe(dev) } static struct epic_type * -epic_devtype(dev) - device_t dev; +epic_devtype(device_t dev) { struct epic_type *t; @@ -218,8 +216,7 @@ epic_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) * Reset to known state. */ static int -epic_attach(dev) - device_t dev; +epic_attach(device_t dev) { struct ifnet *ifp; epic_softc_t *sc; @@ -482,8 +479,7 @@ epic_release(epic_softc_t *sc) * Detach driver and free resources. */ static int -epic_detach(dev) - device_t dev; +epic_detach(device_t dev) { struct ifnet *ifp; epic_softc_t *sc; @@ -515,8 +511,7 @@ epic_detach(dev) * get confused by errant DMAs when rebooting. */ static void -epic_shutdown(dev) - device_t dev; +epic_shutdown(device_t dev) { epic_softc_t *sc; @@ -529,10 +524,7 @@ epic_shutdown(dev) * This is if_ioctl handler. */ static int -epic_ifioctl(ifp, command, data) - struct ifnet *ifp; - u_long command; - caddr_t data; +epic_ifioctl(struct ifnet *ifp, u_long command, caddr_t data) { epic_softc_t *sc = ifp->if_softc; struct mii_data *mii; @@ -645,8 +637,7 @@ epic_dma_map_rxbuf(void *arg, bus_dma_segment_t *segs, int nseg, * or queue become empty. */ static void -epic_ifstart(ifp) - struct ifnet * ifp; +epic_ifstart(struct ifnet * ifp) { epic_softc_t *sc = ifp->if_softc; struct epic_tx_buffer *buf; @@ -725,8 +716,7 @@ epic_ifstart(ifp) * Synopsis: Finish all received frames. */ static void -epic_rx_done(sc) - epic_softc_t *sc; +epic_rx_done(epic_softc_t *sc) { struct ifnet *ifp = sc->ifp; u_int16_t len; @@ -809,8 +799,7 @@ epic_rx_done(sc) * are pending or descriptor is not transmitted yet. */ static void -epic_tx_done(sc) - epic_softc_t *sc; +epic_tx_done(epic_softc_t *sc) { struct epic_tx_buffer *buf; struct epic_tx_desc *desc; @@ -860,8 +849,7 @@ epic_tx_done(sc) * Interrupt function */ static void -epic_intr(arg) - void *arg; +epic_intr(void *arg) { epic_softc_t *sc; int status, i; @@ -932,8 +920,7 @@ epic_intr(arg) * and restart the transmitter. */ static void -epic_tx_underrun(sc) - epic_softc_t *sc; +epic_tx_underrun(epic_softc_t *sc) { if (sc->tx_threshold > TRANSMIT_THRESHOLD_MAX) { sc->txcon &= ~TXCON_EARLY_TRANSMIT_ENABLE; @@ -964,8 +951,7 @@ epic_tx_underrun(sc) * if success continue to work. */ static void -epic_ifwatchdog(ifp) - struct ifnet *ifp; +epic_ifwatchdog(struct ifnet *ifp) { epic_softc_t *sc; int x; @@ -1020,8 +1006,7 @@ epic_stats_update(epic_softc_t * sc) * Set media options. */ static int -epic_ifmedia_upd(ifp) - struct ifnet *ifp; +epic_ifmedia_upd(struct ifnet *ifp) { epic_softc_t *sc; struct mii_data *mii; @@ -1147,9 +1132,7 @@ epic_ifmedia_upd(ifp) * Report current media status. */ static void -epic_ifmedia_sts(ifp, ifmr) - struct ifnet *ifp; - struct ifmediareq *ifmr; +epic_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { epic_softc_t *sc; struct mii_data *mii; @@ -1179,8 +1162,7 @@ epic_ifmedia_sts(ifp, ifmr) * Callback routine, called on media change. */ static void -epic_miibus_statchg(dev) - device_t dev; +epic_miibus_statchg(device_t dev) { epic_softc_t *sc; struct mii_data *mii; @@ -1223,8 +1205,7 @@ epic_miibus_statchg(dev) } static void -epic_miibus_mediainit(dev) - device_t dev; +epic_miibus_mediainit(device_t dev) { epic_softc_t *sc; struct mii_data *mii; @@ -1256,8 +1237,7 @@ epic_miibus_mediainit(dev) * Reset chip and update media. */ static void -epic_init(xsc) - void *xsc; +epic_init(void *xsc) { epic_softc_t *sc = xsc; struct ifnet *ifp = sc->ifp; @@ -1345,8 +1325,7 @@ epic_init(xsc) * access RXCON. */ static void -epic_set_rx_mode(sc) - epic_softc_t *sc; +epic_set_rx_mode(epic_softc_t *sc) { u_int32_t flags; u_int32_t rxcon; @@ -1368,8 +1347,7 @@ epic_set_rx_mode(sc) * access TXCON. */ static void -epic_set_tx_mode(sc) - epic_softc_t *sc; +epic_set_tx_mode(epic_softc_t *sc) { if (sc->txcon & TXCON_EARLY_TRANSMIT_ENABLE) @@ -1386,8 +1364,7 @@ epic_set_tx_mode(sc) * Note: EPIC must be in idle state. */ static void -epic_set_mc_table(sc) - epic_softc_t *sc; +epic_set_mc_table(epic_softc_t *sc) { struct ifnet *ifp; struct ifmultiaddr *ifma; @@ -1433,8 +1410,7 @@ epic_set_mc_table(sc) * Synopsis: Start receive process and transmit one, if they need. */ static void -epic_start_activity(sc) - epic_softc_t *sc; +epic_start_activity(epic_softc_t *sc) { /* Start rx process. */ @@ -1447,8 +1423,7 @@ epic_start_activity(sc) * packet needs to be queued to stop Tx DMA. */ static void -epic_stop_activity(sc) - epic_softc_t *sc; +epic_stop_activity(epic_softc_t *sc) { int status, i; @@ -1493,8 +1468,7 @@ epic_stop_activity(sc) * XXX the packet will then be actually sent over network... */ static int -epic_queue_last_packet(sc) - epic_softc_t *sc; +epic_queue_last_packet(epic_softc_t *sc) { struct epic_tx_desc *desc; struct epic_frag_list *flist; @@ -1563,8 +1537,7 @@ epic_queue_last_packet(sc) * Synopsis: Shut down board and deallocates rings. */ static void -epic_stop(sc) - epic_softc_t *sc; +epic_stop(epic_softc_t *sc) { int s; @@ -1598,8 +1571,7 @@ epic_stop(sc) * Synopsis: This function should free all memory allocated for rings. */ static void -epic_free_rings(sc) - epic_softc_t *sc; +epic_free_rings(epic_softc_t *sc) { int i; @@ -1645,8 +1617,7 @@ epic_free_rings(sc) * are bounded and aligned properly. */ static int -epic_init_rings(sc) - epic_softc_t *sc; +epic_init_rings(epic_softc_t *sc) { int error, i; @@ -1744,9 +1715,7 @@ epic_init_rings(sc) * EEPROM operation functions */ static void -epic_write_eepromreg(sc, val) - epic_softc_t *sc; - u_int8_t val; +epic_write_eepromreg(epic_softc_t *sc, u_int8_t val) { u_int16_t i; @@ -1759,17 +1728,14 @@ epic_write_eepromreg(sc, val) } static u_int8_t -epic_read_eepromreg(sc) - epic_softc_t *sc; +epic_read_eepromreg(epic_softc_t *sc) { return (CSR_READ_1(sc, EECTL)); } static u_int8_t -epic_eeprom_clock(sc, val) - epic_softc_t *sc; - u_int8_t val; +epic_eeprom_clock(epic_softc_t *sc, u_int8_t val) { epic_write_eepromreg(sc, val); @@ -1780,9 +1746,7 @@ epic_eeprom_clock(sc, val) } static void -epic_output_eepromw(sc, val) - epic_softc_t *sc; - u_int16_t val; +epic_output_eepromw(epic_softc_t *sc, u_int16_t val) { int i; @@ -1795,8 +1759,7 @@ epic_output_eepromw(sc, val) } static u_int16_t -epic_input_eepromw(sc) - epic_softc_t *sc; +epic_input_eepromw(epic_softc_t *sc) { u_int16_t retval = 0; int i; @@ -1810,9 +1773,7 @@ epic_input_eepromw(sc) } static int -epic_read_eeprom(sc, loc) - epic_softc_t *sc; - u_int16_t loc; +epic_read_eeprom(epic_softc_t *sc, u_int16_t loc) { u_int16_t dataval; u_int16_t read_cmd; @@ -1837,9 +1798,7 @@ epic_read_eeprom(sc, loc) * Here goes MII read/write routines. */ static int -epic_read_phy_reg(sc, phy, reg) - epic_softc_t *sc; - int phy, reg; +epic_read_phy_reg(epic_softc_t *sc, int phy, int reg) { int i; @@ -1855,9 +1814,7 @@ epic_read_phy_reg(sc, phy, reg) } static void -epic_write_phy_reg(sc, phy, reg, val) - epic_softc_t *sc; - int phy, reg, val; +epic_write_phy_reg(epic_softc_t *sc, int phy, int reg, int val) { int i; @@ -1872,9 +1829,7 @@ epic_write_phy_reg(sc, phy, reg, val) } static int -epic_miibus_readreg(dev, phy, reg) - device_t dev; - int phy, reg; +epic_miibus_readreg(device_t dev, int phy, int reg) { epic_softc_t *sc; @@ -1884,9 +1839,7 @@ epic_miibus_readreg(dev, phy, reg) } static int -epic_miibus_writereg(dev, phy, reg, data) - device_t dev; - int phy, reg, data; +epic_miibus_writereg(device_t dev, int phy, int reg, int data) { epic_softc_t *sc;