d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Set correct argemdio addr, comment out arge1 as its not physically

Browse Source 
connected to anything.  Move a couple of devices out of the kernel
and into modules.
This commit is contained in:
Sean Bruno 2015-10-04 22:50:37 +00:00
parent 8bdcc09641
commit 2bfaedae36
2 changed files with 11 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
sys/mips/conf/WZR-300HP
View File

@ -28,9 +28,6 @@ device geom_uncompress # compressed in-memory filesystem hackery!
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
# options MD_ROOT
# options MD_ROOT_SIZE="6144"
options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
device firmware # Used by the above
@ -42,10 +39,11 @@ device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# Enable GPIO
device gpio
device gpioled
# hwpmc
device hwpmc_mips24k
device hwpmc
# load these via modules, shrink kernel
nodevice if_bridge
nodevice bridgestp
nodevice random

12
sys/mips/conf/WZR-300HP.hints
View File

@ -5,11 +5,11 @@
# arge1 MDIO bus
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x1a000000
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0
hint.arge.0.phymask=0x0
hint.arge.0.phymask=0x1
hint.arge.0.media=1000
hint.arge.0.fduplex=1
hint.arge.0.eeprommac=0x1f05120c
@ -17,9 +17,9 @@ hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
# arge1: nail to 1000/full, RMII - connected to the switch
hint.arge.1.media=1000 # Map to 1000/full
hint.arge.1.fduplex=1 #
hint.arge.1.phymask=0x0 # no directly mapped PHYs
#hint.arge.1.media=1000 # Map to 1000/full
#hint.arge.1.fduplex=1 #
#hint.arge.1.phymask=0x0 # no directly mapped PHYs
#
# AR7240 switch config
@ -28,7 +28,7 @@ hint.arswitch.0.at="mdio0"
hint.arswitch.0.is_7240=1 # We need to be explicitly told this
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3)
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY
hint.arswitch.0.is_rgmii=0 # No, not RGMII
hint.arswitch.0.is_rgmii=1 # No, not RGMII
hint.arswitch.0.is_gmii=0 # No, not GMII
# ath0 - slot 0