diff --git a/lib/libc_r/uthread/pthread_private.h b/lib/libc_r/uthread/pthread_private.h
index 513d81e49f6d..c72adac351f1 100644
--- a/lib/libc_r/uthread/pthread_private.h
+++ b/lib/libc_r/uthread/pthread_private.h
@@ -31,7 +31,7 @@
  *
  * Private thread definitions for the uthread kernel.
  *
- * $Id: pthread_private.h,v 1.21 1999/07/05 00:35:17 jasone Exp $
+ * $Id: pthread_private.h,v 1.22 1999/07/06 00:25:35 jasone Exp $
  */
 
 #ifndef _PTHREAD_PRIVATE_H
@@ -337,9 +337,11 @@ struct pthread_attr {
 #define PTHREAD_STACK_DEFAULT			65536
 /* Size of red zone at the end of each stack. */
 #define PTHREAD_STACK_GUARD			4096
-/* Maximum size of initial thread's stack.  This perhaps deserves to be larger
+/*
+ * Maximum size of initial thread's stack.  This perhaps deserves to be larger
  * than the stacks of other threads, since many applications are likely to run
- * almost entirely on this stack. */
+ * almost entirely on this stack.
+ */
 #define PTHREAD_STACK_INITIAL			0x100000
 /* Address immediately beyond the beginning of the initial thread stack. */
 #if defined(__FreeBSD__)
@@ -887,9 +889,11 @@ SCLASS pthread_switch_routine_t _sched_switch_hook
 #endif
 ;
 
-/* Spare stack queue.  Stacks of default size are cached in order to reduce
+/*
+ * Spare stack queue.  Stacks of default size are cached in order to reduce
  * thread creation time.  Spare stacks are used in LIFO order to increase cache
- * locality. */
+ * locality.
+ */
 SCLASS SLIST_HEAD(, stack)	_stackq;
 
 /* Base address of next unallocated default-size stack.  Stacks are allocated
diff --git a/lib/libc_r/uthread/uthread_create.c b/lib/libc_r/uthread/uthread_create.c
index f5631a5670ec..1641ce4c1bd3 100644
--- a/lib/libc_r/uthread/uthread_create.c
+++ b/lib/libc_r/uthread/uthread_create.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: uthread_create.c,v 1.14 1999/07/05 00:35:17 jasone Exp $
+ * $Id: uthread_create.c,v 1.15 1999/07/06 00:25:36 jasone Exp $
  */
 #include <errno.h>
 #include <stdlib.h>
@@ -79,64 +79,82 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 		/* Check if a stack was specified in the thread attributes: */
 		if ((stack = pattr->stackaddr_attr) != NULL) {
 		}
-#ifdef __i386__
 		/* Allocate memory for a default-size stack: */
 		else if (pattr->stacksize_attr == PTHREAD_STACK_DEFAULT) {
 			struct stack	* spare_stack;
 			
 			/* Allocate or re-use a default-size stack. */
 			
-			/* Use the garbage collector mutex for synchronization
+			/*
+			 * Use the garbage collector mutex for synchronization
 			 * of the spare stack list.
-			 *
-			 * XXX This may not be ideal. */
+			 */
 			if (pthread_mutex_lock(&_gc_mutex) != 0)
 				PANIC("Cannot lock gc mutex");
 			
-			if (NULL != (spare_stack = SLIST_FIRST(&_stackq))) {
+			if ((spare_stack = SLIST_FIRST(&_stackq)) != NULL) {
 				/* Use the spare stack. */
 				SLIST_REMOVE_HEAD(&_stackq, qe);
-				stack = sizeof(struct stack) + (void *) spare_stack - PTHREAD_STACK_DEFAULT;
+				
+				/* Unlock the garbage collector mutex. */
+				if (pthread_mutex_unlock(&_gc_mutex) != 0)
+					PANIC("Cannot unlock gc mutex");
+				
+				stack = sizeof(struct stack)
+				    + (void *) spare_stack
+				    - PTHREAD_STACK_DEFAULT;
 			} else {
+				/* Unlock the garbage collector mutex. */
+				if (pthread_mutex_unlock(&_gc_mutex) != 0)
+					PANIC("Cannot unlock gc mutex");
+			    
 				/* Allocate a new stack. */
 				stack = _next_stack + PTHREAD_STACK_GUARD;
-				/* Even if stack allocation fails, we don't want to try to use this location again, so unconditionally
-				 * decrement _next_stack.  Under normal operating conditions, the most likely reason for an mmap()
-				 * error is a stack overflow of the adjacent thread stack. */
-				_next_stack -= (PTHREAD_STACK_DEFAULT + PTHREAD_STACK_GUARD);
+				/*
+				 * Even if stack allocation fails, we don't want
+				 * to try to use this location again, so
+				 * unconditionally decrement _next_stack.  Under
+				 * normal operating conditions, the most likely
+				 * reason for an mmap() error is a stack
+				 * overflow of the adjacent thread stack.
+				 */
+				_next_stack -= (PTHREAD_STACK_DEFAULT
+						+ PTHREAD_STACK_GUARD);
 
 				/* Red zone: */
-				if (MAP_FAILED == mmap(_next_stack, PTHREAD_STACK_GUARD, 0, MAP_ANON, -1, 0)) {
+				if (mmap(_next_stack, PTHREAD_STACK_GUARD, 0,
+					 MAP_ANON, -1, 0) == MAP_FAILED) {
 					ret = EAGAIN;
 					free(new_thread);
 				}
 				/* Stack: */
-				else if (MAP_FAILED == mmap(stack, PTHREAD_STACK_DEFAULT, PROT_READ | PROT_WRITE, MAP_STACK, -1, 0)) {
+				else if (mmap(stack,
+					      PTHREAD_STACK_DEFAULT,
+					      PROT_READ | PROT_WRITE,
+#ifdef __i386__
+					      MAP_STACK,
+#else
+					      MAP_ANON,
+#endif
+					      -1, 0) == MAP_FAILED) {
 					ret = EAGAIN;
-					munmap(_next_stack, PTHREAD_STACK_GUARD);
+					munmap(_next_stack,
+					       PTHREAD_STACK_GUARD);
 					free(new_thread);
 				}
 			}
+		}
+		/*
+		 * The user wants a stack of a particular size.  Lets hope they
+		 * really know what they want, and simply malloc the stack.
+		 */
+		else if ((stack = (void *) malloc(pattr->stacksize_attr))
+			 == NULL) {
+			/* Insufficient memory to create a thread: */
+			ret = EAGAIN;
+			free(new_thread);
+		}
 
-			/* Unlock the garbage collector mutex. */
-			if (pthread_mutex_unlock(&_gc_mutex) != 0)
-				PANIC("Cannot unlock gc mutex");
-		}
-		/* The user wants a stack of a particular size.  Lets hope they really know what they want, and simply malloc the
-		 * stack. */
-		else if ((stack = (void *) malloc(pattr->stacksize_attr)) == NULL) {
-			/* Insufficient memory to create a thread: */
-			ret = EAGAIN;
-			free(new_thread);
-		}
-#else
-		/* Allocate memory for the stack: */
-		else if ((stack = (void *) malloc(pattr->stacksize_attr)) == NULL) {
-			/* Insufficient memory to create a thread: */
-			ret = EAGAIN;
-			free(new_thread);
-		}
-#endif
 		/* Check for errors: */
 		if (ret != 0) {
 		} else {
@@ -211,16 +229,20 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 			 */
 			if (new_thread->attr.flags & PTHREAD_INHERIT_SCHED) {
 				/* Copy the scheduling attributes: */
-				new_thread->base_priority = _thread_run->base_priority;
-				new_thread->attr.prio = _thread_run->base_priority;
-				new_thread->attr.sched_policy = _thread_run->attr.sched_policy;
+				new_thread->base_priority
+				    = _thread_run->base_priority;
+				new_thread->attr.prio
+				    = _thread_run->base_priority;
+				new_thread->attr.sched_policy
+				    = _thread_run->attr.sched_policy;
 			} else {
 				/*
 				 * Use just the thread priority, leaving the
 				 * other scheduling attributes as their
 				 * default values: 
 				 */
-				new_thread->base_priority = new_thread->attr.prio;
+				new_thread->base_priority
+				    = new_thread->attr.prio;
 			}
 			new_thread->active_priority = new_thread->base_priority;
 			new_thread->inherited_priority = 0;
@@ -256,8 +278,7 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 			if (pattr->suspend == PTHREAD_CREATE_SUSPENDED) {
 				new_thread->state = PS_SUSPENDED;
 				PTHREAD_WAITQ_INSERT(new_thread);
-			}
-			else {
+			} else {
 				new_thread->state = PS_RUNNING;
 				PTHREAD_PRIOQ_INSERT_TAIL(new_thread);
 			}
diff --git a/lib/libc_r/uthread/uthread_gc.c b/lib/libc_r/uthread/uthread_gc.c
index 6b504d94a435..cb8de133b112 100644
--- a/lib/libc_r/uthread/uthread_gc.c
+++ b/lib/libc_r/uthread/uthread_gc.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- *	$Id: uthread_gc.c,v 1.5 1999/07/05 00:35:18 jasone Exp $
+ *	$Id: uthread_gc.c,v 1.6 1999/07/06 00:25:37 jasone Exp $
  *
  * Garbage collector thread. Frees memory allocated for dead threads.
  *
@@ -113,8 +113,8 @@ _thread_gc(pthread_addr_t arg)
 		 * has memory to free.
 		 */
 		for (pthread = TAILQ_FIRST(&_dead_list);
-		    p_stack == NULL && pthread_cln == NULL && pthread != NULL;
-		    pthread = TAILQ_NEXT(pthread, dle)) {
+		     p_stack == NULL && pthread_cln == NULL && pthread != NULL;
+		     pthread = TAILQ_NEXT(pthread, dle)) {
 			/* Check if the initial thread: */
 			if (pthread == _thread_initial) {
 				/* Don't destroy the initial thread. */
@@ -123,7 +123,7 @@ _thread_gc(pthread_addr_t arg)
 			 * Check if this thread has detached:
 			 */
 			else if ((pthread->attr.flags &
-			    PTHREAD_DETACHED) != 0) {
+				  PTHREAD_DETACHED) != 0) {
 				/* Remove this thread from the dead list: */
 				TAILQ_REMOVE(&_dead_list, pthread, dle);
 
@@ -134,23 +134,28 @@ _thread_gc(pthread_addr_t arg)
 				 */
 				if (pthread->attr.stackaddr_attr == NULL &&
 				    pthread->stack != NULL) {
-#ifdef __i386__
-					if (pthread->attr.stacksize_attr == PTHREAD_STACK_DEFAULT) {
-						/* Default-size stack.  Cache it: */
-						struct stack	* spare_stack = (pthread->stack + PTHREAD_STACK_DEFAULT
-										 - sizeof(struct stack));
-						SLIST_INSERT_HEAD(&_stackq, spare_stack, qe);
+					if (pthread->attr.stacksize_attr
+					    == PTHREAD_STACK_DEFAULT) {
+						/*
+						 * Default-size stack.  Cache
+						 * it:
+						 */
+						struct stack	* spare_stack;
+
+						spare_stack
+						    = (pthread->stack
+						       + PTHREAD_STACK_DEFAULT
+						       - sizeof(struct stack));
+						SLIST_INSERT_HEAD(&_stackq,
+								  spare_stack,
+								  qe);
 					} else {
-						/* Non-standard stack size.  free() it outside the locks: */
+						/*
+						 * Non-standard stack size.
+                                                 * free() it outside the locks.
+						 */
 						p_stack = pthread->stack;
 					}
-#else
-					/*
-					 * Point to the stack that must
-					 * be freed outside the locks:
-					 */
-					p_stack = pthread->stack;
-#endif
 				}
 
 				/*
@@ -170,23 +175,28 @@ _thread_gc(pthread_addr_t arg)
 				 */
 				if (pthread->attr.stackaddr_attr == NULL &&
 				    pthread->stack != NULL) {
-#ifdef __i386__
-					if (pthread->attr.stacksize_attr == PTHREAD_STACK_DEFAULT) {
-						/* Default-size stack.  Cache it: */
-						struct stack	* spare_stack = (pthread->stack + PTHREAD_STACK_DEFAULT
-										 - sizeof(struct stack));
-						SLIST_INSERT_HEAD(&_stackq, spare_stack, qe);
+					if (pthread->attr.stacksize_attr
+					    == PTHREAD_STACK_DEFAULT) {
+						/*
+						 * Default-size stack.  Cache
+						 * it:
+						 */
+						struct stack	* spare_stack;
+
+						spare_stack
+						    = (pthread->stack
+						       + PTHREAD_STACK_DEFAULT
+						       - sizeof(struct stack));
+						SLIST_INSERT_HEAD(&_stackq,
+								  spare_stack,
+								  qe);
 					} else {
-						/* Non-standard stack size.  free() it outside the locks: */
+						/*
+						 * Non-standard stack size.
+						 * free() it outside the locks:
+						 */
 						p_stack = pthread->stack;
 					}
-#else
-					/*
-					 * Point to the stack that must
-					 * be freed outside the locks:
-					 */
-					p_stack = pthread->stack;
-#endif
 					
 					/*
 					 * NULL the stack pointer now
diff --git a/lib/libc_r/uthread/uthread_init.c b/lib/libc_r/uthread/uthread_init.c
index a5b7a828cfa4..f5e2c456d366 100644
--- a/lib/libc_r/uthread/uthread_init.c
+++ b/lib/libc_r/uthread/uthread_init.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: uthread_init.c,v 1.13 1999/07/05 00:35:19 jasone Exp $
+ * $Id: uthread_init.c,v 1.14 1999/07/06 00:25:38 jasone Exp $
  */
 
 /* Allocate space for global thread variables here: */
@@ -180,15 +180,17 @@ _thread_init(void)
 		/* Initialize the scheduling switch hook routine: */
 		_sched_switch_hook = NULL;
 
-#ifdef __i386__
 		/* Initialize the thread stack cache: */
 		SLIST_INIT(&_stackq);
 
 		/* Create the red zone for the main stack. */
-		if (MAP_FAILED == mmap((void *) PTHREAD_STACK_TOP - PTHREAD_STACK_INITIAL, PTHREAD_STACK_GUARD, 0, MAP_ANON, -1, 0)) {
+		if (mmap((void *) PTHREAD_STACK_TOP
+			 - PTHREAD_STACK_INITIAL,
+			 PTHREAD_STACK_GUARD, 0, MAP_ANON,
+			 -1, 0) == MAP_FAILED) {
 			PANIC("Cannot allocate red zone for initial thread");
 		}
-#endif
+		
 		/*
 		 * Write a magic value to the thread structure
 		 * to help identify valid ones:
diff --git a/lib/libkse/thread/thr_create.c b/lib/libkse/thread/thr_create.c
index f5631a5670ec..1641ce4c1bd3 100644
--- a/lib/libkse/thread/thr_create.c
+++ b/lib/libkse/thread/thr_create.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: uthread_create.c,v 1.14 1999/07/05 00:35:17 jasone Exp $
+ * $Id: uthread_create.c,v 1.15 1999/07/06 00:25:36 jasone Exp $
  */
 #include <errno.h>
 #include <stdlib.h>
@@ -79,64 +79,82 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 		/* Check if a stack was specified in the thread attributes: */
 		if ((stack = pattr->stackaddr_attr) != NULL) {
 		}
-#ifdef __i386__
 		/* Allocate memory for a default-size stack: */
 		else if (pattr->stacksize_attr == PTHREAD_STACK_DEFAULT) {
 			struct stack	* spare_stack;
 			
 			/* Allocate or re-use a default-size stack. */
 			
-			/* Use the garbage collector mutex for synchronization
+			/*
+			 * Use the garbage collector mutex for synchronization
 			 * of the spare stack list.
-			 *
-			 * XXX This may not be ideal. */
+			 */
 			if (pthread_mutex_lock(&_gc_mutex) != 0)
 				PANIC("Cannot lock gc mutex");
 			
-			if (NULL != (spare_stack = SLIST_FIRST(&_stackq))) {
+			if ((spare_stack = SLIST_FIRST(&_stackq)) != NULL) {
 				/* Use the spare stack. */
 				SLIST_REMOVE_HEAD(&_stackq, qe);
-				stack = sizeof(struct stack) + (void *) spare_stack - PTHREAD_STACK_DEFAULT;
+				
+				/* Unlock the garbage collector mutex. */
+				if (pthread_mutex_unlock(&_gc_mutex) != 0)
+					PANIC("Cannot unlock gc mutex");
+				
+				stack = sizeof(struct stack)
+				    + (void *) spare_stack
+				    - PTHREAD_STACK_DEFAULT;
 			} else {
+				/* Unlock the garbage collector mutex. */
+				if (pthread_mutex_unlock(&_gc_mutex) != 0)
+					PANIC("Cannot unlock gc mutex");
+			    
 				/* Allocate a new stack. */
 				stack = _next_stack + PTHREAD_STACK_GUARD;
-				/* Even if stack allocation fails, we don't want to try to use this location again, so unconditionally
-				 * decrement _next_stack.  Under normal operating conditions, the most likely reason for an mmap()
-				 * error is a stack overflow of the adjacent thread stack. */
-				_next_stack -= (PTHREAD_STACK_DEFAULT + PTHREAD_STACK_GUARD);
+				/*
+				 * Even if stack allocation fails, we don't want
+				 * to try to use this location again, so
+				 * unconditionally decrement _next_stack.  Under
+				 * normal operating conditions, the most likely
+				 * reason for an mmap() error is a stack
+				 * overflow of the adjacent thread stack.
+				 */
+				_next_stack -= (PTHREAD_STACK_DEFAULT
+						+ PTHREAD_STACK_GUARD);
 
 				/* Red zone: */
-				if (MAP_FAILED == mmap(_next_stack, PTHREAD_STACK_GUARD, 0, MAP_ANON, -1, 0)) {
+				if (mmap(_next_stack, PTHREAD_STACK_GUARD, 0,
+					 MAP_ANON, -1, 0) == MAP_FAILED) {
 					ret = EAGAIN;
 					free(new_thread);
 				}
 				/* Stack: */
-				else if (MAP_FAILED == mmap(stack, PTHREAD_STACK_DEFAULT, PROT_READ | PROT_WRITE, MAP_STACK, -1, 0)) {
+				else if (mmap(stack,
+					      PTHREAD_STACK_DEFAULT,
+					      PROT_READ | PROT_WRITE,
+#ifdef __i386__
+					      MAP_STACK,
+#else
+					      MAP_ANON,
+#endif
+					      -1, 0) == MAP_FAILED) {
 					ret = EAGAIN;
-					munmap(_next_stack, PTHREAD_STACK_GUARD);
+					munmap(_next_stack,
+					       PTHREAD_STACK_GUARD);
 					free(new_thread);
 				}
 			}
+		}
+		/*
+		 * The user wants a stack of a particular size.  Lets hope they
+		 * really know what they want, and simply malloc the stack.
+		 */
+		else if ((stack = (void *) malloc(pattr->stacksize_attr))
+			 == NULL) {
+			/* Insufficient memory to create a thread: */
+			ret = EAGAIN;
+			free(new_thread);
+		}
 
-			/* Unlock the garbage collector mutex. */
-			if (pthread_mutex_unlock(&_gc_mutex) != 0)
-				PANIC("Cannot unlock gc mutex");
-		}
-		/* The user wants a stack of a particular size.  Lets hope they really know what they want, and simply malloc the
-		 * stack. */
-		else if ((stack = (void *) malloc(pattr->stacksize_attr)) == NULL) {
-			/* Insufficient memory to create a thread: */
-			ret = EAGAIN;
-			free(new_thread);
-		}
-#else
-		/* Allocate memory for the stack: */
-		else if ((stack = (void *) malloc(pattr->stacksize_attr)) == NULL) {
-			/* Insufficient memory to create a thread: */
-			ret = EAGAIN;
-			free(new_thread);
-		}
-#endif
 		/* Check for errors: */
 		if (ret != 0) {
 		} else {
@@ -211,16 +229,20 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 			 */
 			if (new_thread->attr.flags & PTHREAD_INHERIT_SCHED) {
 				/* Copy the scheduling attributes: */
-				new_thread->base_priority = _thread_run->base_priority;
-				new_thread->attr.prio = _thread_run->base_priority;
-				new_thread->attr.sched_policy = _thread_run->attr.sched_policy;
+				new_thread->base_priority
+				    = _thread_run->base_priority;
+				new_thread->attr.prio
+				    = _thread_run->base_priority;
+				new_thread->attr.sched_policy
+				    = _thread_run->attr.sched_policy;
 			} else {
 				/*
 				 * Use just the thread priority, leaving the
 				 * other scheduling attributes as their
 				 * default values: 
 				 */
-				new_thread->base_priority = new_thread->attr.prio;
+				new_thread->base_priority
+				    = new_thread->attr.prio;
 			}
 			new_thread->active_priority = new_thread->base_priority;
 			new_thread->inherited_priority = 0;
@@ -256,8 +278,7 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 			if (pattr->suspend == PTHREAD_CREATE_SUSPENDED) {
 				new_thread->state = PS_SUSPENDED;
 				PTHREAD_WAITQ_INSERT(new_thread);
-			}
-			else {
+			} else {
 				new_thread->state = PS_RUNNING;
 				PTHREAD_PRIOQ_INSERT_TAIL(new_thread);
 			}
diff --git a/lib/libkse/thread/thr_init.c b/lib/libkse/thread/thr_init.c
index a5b7a828cfa4..f5e2c456d366 100644
--- a/lib/libkse/thread/thr_init.c
+++ b/lib/libkse/thread/thr_init.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: uthread_init.c,v 1.13 1999/07/05 00:35:19 jasone Exp $
+ * $Id: uthread_init.c,v 1.14 1999/07/06 00:25:38 jasone Exp $
  */
 
 /* Allocate space for global thread variables here: */
@@ -180,15 +180,17 @@ _thread_init(void)
 		/* Initialize the scheduling switch hook routine: */
 		_sched_switch_hook = NULL;
 
-#ifdef __i386__
 		/* Initialize the thread stack cache: */
 		SLIST_INIT(&_stackq);
 
 		/* Create the red zone for the main stack. */
-		if (MAP_FAILED == mmap((void *) PTHREAD_STACK_TOP - PTHREAD_STACK_INITIAL, PTHREAD_STACK_GUARD, 0, MAP_ANON, -1, 0)) {
+		if (mmap((void *) PTHREAD_STACK_TOP
+			 - PTHREAD_STACK_INITIAL,
+			 PTHREAD_STACK_GUARD, 0, MAP_ANON,
+			 -1, 0) == MAP_FAILED) {
 			PANIC("Cannot allocate red zone for initial thread");
 		}
-#endif
+		
 		/*
 		 * Write a magic value to the thread structure
 		 * to help identify valid ones:
diff --git a/lib/libkse/thread/thr_private.h b/lib/libkse/thread/thr_private.h
index 513d81e49f6d..c72adac351f1 100644
--- a/lib/libkse/thread/thr_private.h
+++ b/lib/libkse/thread/thr_private.h
@@ -31,7 +31,7 @@
  *
  * Private thread definitions for the uthread kernel.
  *
- * $Id: pthread_private.h,v 1.21 1999/07/05 00:35:17 jasone Exp $
+ * $Id: pthread_private.h,v 1.22 1999/07/06 00:25:35 jasone Exp $
  */
 
 #ifndef _PTHREAD_PRIVATE_H
@@ -337,9 +337,11 @@ struct pthread_attr {
 #define PTHREAD_STACK_DEFAULT			65536
 /* Size of red zone at the end of each stack. */
 #define PTHREAD_STACK_GUARD			4096
-/* Maximum size of initial thread's stack.  This perhaps deserves to be larger
+/*
+ * Maximum size of initial thread's stack.  This perhaps deserves to be larger
  * than the stacks of other threads, since many applications are likely to run
- * almost entirely on this stack. */
+ * almost entirely on this stack.
+ */
 #define PTHREAD_STACK_INITIAL			0x100000
 /* Address immediately beyond the beginning of the initial thread stack. */
 #if defined(__FreeBSD__)
@@ -887,9 +889,11 @@ SCLASS pthread_switch_routine_t _sched_switch_hook
 #endif
 ;
 
-/* Spare stack queue.  Stacks of default size are cached in order to reduce
+/*
+ * Spare stack queue.  Stacks of default size are cached in order to reduce
  * thread creation time.  Spare stacks are used in LIFO order to increase cache
- * locality. */
+ * locality.
+ */
 SCLASS SLIST_HEAD(, stack)	_stackq;
 
 /* Base address of next unallocated default-size stack.  Stacks are allocated
diff --git a/lib/libpthread/thread/thr_create.c b/lib/libpthread/thread/thr_create.c
index f5631a5670ec..1641ce4c1bd3 100644
--- a/lib/libpthread/thread/thr_create.c
+++ b/lib/libpthread/thread/thr_create.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: uthread_create.c,v 1.14 1999/07/05 00:35:17 jasone Exp $
+ * $Id: uthread_create.c,v 1.15 1999/07/06 00:25:36 jasone Exp $
  */
 #include <errno.h>
 #include <stdlib.h>
@@ -79,64 +79,82 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 		/* Check if a stack was specified in the thread attributes: */
 		if ((stack = pattr->stackaddr_attr) != NULL) {
 		}
-#ifdef __i386__
 		/* Allocate memory for a default-size stack: */
 		else if (pattr->stacksize_attr == PTHREAD_STACK_DEFAULT) {
 			struct stack	* spare_stack;
 			
 			/* Allocate or re-use a default-size stack. */
 			
-			/* Use the garbage collector mutex for synchronization
+			/*
+			 * Use the garbage collector mutex for synchronization
 			 * of the spare stack list.
-			 *
-			 * XXX This may not be ideal. */
+			 */
 			if (pthread_mutex_lock(&_gc_mutex) != 0)
 				PANIC("Cannot lock gc mutex");
 			
-			if (NULL != (spare_stack = SLIST_FIRST(&_stackq))) {
+			if ((spare_stack = SLIST_FIRST(&_stackq)) != NULL) {
 				/* Use the spare stack. */
 				SLIST_REMOVE_HEAD(&_stackq, qe);
-				stack = sizeof(struct stack) + (void *) spare_stack - PTHREAD_STACK_DEFAULT;
+				
+				/* Unlock the garbage collector mutex. */
+				if (pthread_mutex_unlock(&_gc_mutex) != 0)
+					PANIC("Cannot unlock gc mutex");
+				
+				stack = sizeof(struct stack)
+				    + (void *) spare_stack
+				    - PTHREAD_STACK_DEFAULT;
 			} else {
+				/* Unlock the garbage collector mutex. */
+				if (pthread_mutex_unlock(&_gc_mutex) != 0)
+					PANIC("Cannot unlock gc mutex");
+			    
 				/* Allocate a new stack. */
 				stack = _next_stack + PTHREAD_STACK_GUARD;
-				/* Even if stack allocation fails, we don't want to try to use this location again, so unconditionally
-				 * decrement _next_stack.  Under normal operating conditions, the most likely reason for an mmap()
-				 * error is a stack overflow of the adjacent thread stack. */
-				_next_stack -= (PTHREAD_STACK_DEFAULT + PTHREAD_STACK_GUARD);
+				/*
+				 * Even if stack allocation fails, we don't want
+				 * to try to use this location again, so
+				 * unconditionally decrement _next_stack.  Under
+				 * normal operating conditions, the most likely
+				 * reason for an mmap() error is a stack
+				 * overflow of the adjacent thread stack.
+				 */
+				_next_stack -= (PTHREAD_STACK_DEFAULT
+						+ PTHREAD_STACK_GUARD);
 
 				/* Red zone: */
-				if (MAP_FAILED == mmap(_next_stack, PTHREAD_STACK_GUARD, 0, MAP_ANON, -1, 0)) {
+				if (mmap(_next_stack, PTHREAD_STACK_GUARD, 0,
+					 MAP_ANON, -1, 0) == MAP_FAILED) {
 					ret = EAGAIN;
 					free(new_thread);
 				}
 				/* Stack: */
-				else if (MAP_FAILED == mmap(stack, PTHREAD_STACK_DEFAULT, PROT_READ | PROT_WRITE, MAP_STACK, -1, 0)) {
+				else if (mmap(stack,
+					      PTHREAD_STACK_DEFAULT,
+					      PROT_READ | PROT_WRITE,
+#ifdef __i386__
+					      MAP_STACK,
+#else
+					      MAP_ANON,
+#endif
+					      -1, 0) == MAP_FAILED) {
 					ret = EAGAIN;
-					munmap(_next_stack, PTHREAD_STACK_GUARD);
+					munmap(_next_stack,
+					       PTHREAD_STACK_GUARD);
 					free(new_thread);
 				}
 			}
+		}
+		/*
+		 * The user wants a stack of a particular size.  Lets hope they
+		 * really know what they want, and simply malloc the stack.
+		 */
+		else if ((stack = (void *) malloc(pattr->stacksize_attr))
+			 == NULL) {
+			/* Insufficient memory to create a thread: */
+			ret = EAGAIN;
+			free(new_thread);
+		}
 
-			/* Unlock the garbage collector mutex. */
-			if (pthread_mutex_unlock(&_gc_mutex) != 0)
-				PANIC("Cannot unlock gc mutex");
-		}
-		/* The user wants a stack of a particular size.  Lets hope they really know what they want, and simply malloc the
-		 * stack. */
-		else if ((stack = (void *) malloc(pattr->stacksize_attr)) == NULL) {
-			/* Insufficient memory to create a thread: */
-			ret = EAGAIN;
-			free(new_thread);
-		}
-#else
-		/* Allocate memory for the stack: */
-		else if ((stack = (void *) malloc(pattr->stacksize_attr)) == NULL) {
-			/* Insufficient memory to create a thread: */
-			ret = EAGAIN;
-			free(new_thread);
-		}
-#endif
 		/* Check for errors: */
 		if (ret != 0) {
 		} else {
@@ -211,16 +229,20 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 			 */
 			if (new_thread->attr.flags & PTHREAD_INHERIT_SCHED) {
 				/* Copy the scheduling attributes: */
-				new_thread->base_priority = _thread_run->base_priority;
-				new_thread->attr.prio = _thread_run->base_priority;
-				new_thread->attr.sched_policy = _thread_run->attr.sched_policy;
+				new_thread->base_priority
+				    = _thread_run->base_priority;
+				new_thread->attr.prio
+				    = _thread_run->base_priority;
+				new_thread->attr.sched_policy
+				    = _thread_run->attr.sched_policy;
 			} else {
 				/*
 				 * Use just the thread priority, leaving the
 				 * other scheduling attributes as their
 				 * default values: 
 				 */
-				new_thread->base_priority = new_thread->attr.prio;
+				new_thread->base_priority
+				    = new_thread->attr.prio;
 			}
 			new_thread->active_priority = new_thread->base_priority;
 			new_thread->inherited_priority = 0;
@@ -256,8 +278,7 @@ pthread_create(pthread_t * thread, const pthread_attr_t * attr,
 			if (pattr->suspend == PTHREAD_CREATE_SUSPENDED) {
 				new_thread->state = PS_SUSPENDED;
 				PTHREAD_WAITQ_INSERT(new_thread);
-			}
-			else {
+			} else {
 				new_thread->state = PS_RUNNING;
 				PTHREAD_PRIOQ_INSERT_TAIL(new_thread);
 			}
diff --git a/lib/libpthread/thread/thr_gc.c b/lib/libpthread/thread/thr_gc.c
index 6b504d94a435..cb8de133b112 100644
--- a/lib/libpthread/thread/thr_gc.c
+++ b/lib/libpthread/thread/thr_gc.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- *	$Id: uthread_gc.c,v 1.5 1999/07/05 00:35:18 jasone Exp $
+ *	$Id: uthread_gc.c,v 1.6 1999/07/06 00:25:37 jasone Exp $
  *
  * Garbage collector thread. Frees memory allocated for dead threads.
  *
@@ -113,8 +113,8 @@ _thread_gc(pthread_addr_t arg)
 		 * has memory to free.
 		 */
 		for (pthread = TAILQ_FIRST(&_dead_list);
-		    p_stack == NULL && pthread_cln == NULL && pthread != NULL;
-		    pthread = TAILQ_NEXT(pthread, dle)) {
+		     p_stack == NULL && pthread_cln == NULL && pthread != NULL;
+		     pthread = TAILQ_NEXT(pthread, dle)) {
 			/* Check if the initial thread: */
 			if (pthread == _thread_initial) {
 				/* Don't destroy the initial thread. */
@@ -123,7 +123,7 @@ _thread_gc(pthread_addr_t arg)
 			 * Check if this thread has detached:
 			 */
 			else if ((pthread->attr.flags &
-			    PTHREAD_DETACHED) != 0) {
+				  PTHREAD_DETACHED) != 0) {
 				/* Remove this thread from the dead list: */
 				TAILQ_REMOVE(&_dead_list, pthread, dle);
 
@@ -134,23 +134,28 @@ _thread_gc(pthread_addr_t arg)
 				 */
 				if (pthread->attr.stackaddr_attr == NULL &&
 				    pthread->stack != NULL) {
-#ifdef __i386__
-					if (pthread->attr.stacksize_attr == PTHREAD_STACK_DEFAULT) {
-						/* Default-size stack.  Cache it: */
-						struct stack	* spare_stack = (pthread->stack + PTHREAD_STACK_DEFAULT
-										 - sizeof(struct stack));
-						SLIST_INSERT_HEAD(&_stackq, spare_stack, qe);
+					if (pthread->attr.stacksize_attr
+					    == PTHREAD_STACK_DEFAULT) {
+						/*
+						 * Default-size stack.  Cache
+						 * it:
+						 */
+						struct stack	* spare_stack;
+
+						spare_stack
+						    = (pthread->stack
+						       + PTHREAD_STACK_DEFAULT
+						       - sizeof(struct stack));
+						SLIST_INSERT_HEAD(&_stackq,
+								  spare_stack,
+								  qe);
 					} else {
-						/* Non-standard stack size.  free() it outside the locks: */
+						/*
+						 * Non-standard stack size.
+                                                 * free() it outside the locks.
+						 */
 						p_stack = pthread->stack;
 					}
-#else
-					/*
-					 * Point to the stack that must
-					 * be freed outside the locks:
-					 */
-					p_stack = pthread->stack;
-#endif
 				}
 
 				/*
@@ -170,23 +175,28 @@ _thread_gc(pthread_addr_t arg)
 				 */
 				if (pthread->attr.stackaddr_attr == NULL &&
 				    pthread->stack != NULL) {
-#ifdef __i386__
-					if (pthread->attr.stacksize_attr == PTHREAD_STACK_DEFAULT) {
-						/* Default-size stack.  Cache it: */
-						struct stack	* spare_stack = (pthread->stack + PTHREAD_STACK_DEFAULT
-										 - sizeof(struct stack));
-						SLIST_INSERT_HEAD(&_stackq, spare_stack, qe);
+					if (pthread->attr.stacksize_attr
+					    == PTHREAD_STACK_DEFAULT) {
+						/*
+						 * Default-size stack.  Cache
+						 * it:
+						 */
+						struct stack	* spare_stack;
+
+						spare_stack
+						    = (pthread->stack
+						       + PTHREAD_STACK_DEFAULT
+						       - sizeof(struct stack));
+						SLIST_INSERT_HEAD(&_stackq,
+								  spare_stack,
+								  qe);
 					} else {
-						/* Non-standard stack size.  free() it outside the locks: */
+						/*
+						 * Non-standard stack size.
+						 * free() it outside the locks:
+						 */
 						p_stack = pthread->stack;
 					}
-#else
-					/*
-					 * Point to the stack that must
-					 * be freed outside the locks:
-					 */
-					p_stack = pthread->stack;
-#endif
 					
 					/*
 					 * NULL the stack pointer now
diff --git a/lib/libpthread/thread/thr_init.c b/lib/libpthread/thread/thr_init.c
index a5b7a828cfa4..f5e2c456d366 100644
--- a/lib/libpthread/thread/thr_init.c
+++ b/lib/libpthread/thread/thr_init.c
@@ -29,7 +29,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: uthread_init.c,v 1.13 1999/07/05 00:35:19 jasone Exp $
+ * $Id: uthread_init.c,v 1.14 1999/07/06 00:25:38 jasone Exp $
  */
 
 /* Allocate space for global thread variables here: */
@@ -180,15 +180,17 @@ _thread_init(void)
 		/* Initialize the scheduling switch hook routine: */
 		_sched_switch_hook = NULL;
 
-#ifdef __i386__
 		/* Initialize the thread stack cache: */
 		SLIST_INIT(&_stackq);
 
 		/* Create the red zone for the main stack. */
-		if (MAP_FAILED == mmap((void *) PTHREAD_STACK_TOP - PTHREAD_STACK_INITIAL, PTHREAD_STACK_GUARD, 0, MAP_ANON, -1, 0)) {
+		if (mmap((void *) PTHREAD_STACK_TOP
+			 - PTHREAD_STACK_INITIAL,
+			 PTHREAD_STACK_GUARD, 0, MAP_ANON,
+			 -1, 0) == MAP_FAILED) {
 			PANIC("Cannot allocate red zone for initial thread");
 		}
-#endif
+		
 		/*
 		 * Write a magic value to the thread structure
 		 * to help identify valid ones:
diff --git a/lib/libpthread/thread/thr_private.h b/lib/libpthread/thread/thr_private.h
index 513d81e49f6d..c72adac351f1 100644
--- a/lib/libpthread/thread/thr_private.h
+++ b/lib/libpthread/thread/thr_private.h
@@ -31,7 +31,7 @@
  *
  * Private thread definitions for the uthread kernel.
  *
- * $Id: pthread_private.h,v 1.21 1999/07/05 00:35:17 jasone Exp $
+ * $Id: pthread_private.h,v 1.22 1999/07/06 00:25:35 jasone Exp $
  */
 
 #ifndef _PTHREAD_PRIVATE_H
@@ -337,9 +337,11 @@ struct pthread_attr {
 #define PTHREAD_STACK_DEFAULT			65536
 /* Size of red zone at the end of each stack. */
 #define PTHREAD_STACK_GUARD			4096
-/* Maximum size of initial thread's stack.  This perhaps deserves to be larger
+/*
+ * Maximum size of initial thread's stack.  This perhaps deserves to be larger
  * than the stacks of other threads, since many applications are likely to run
- * almost entirely on this stack. */
+ * almost entirely on this stack.
+ */
 #define PTHREAD_STACK_INITIAL			0x100000
 /* Address immediately beyond the beginning of the initial thread stack. */
 #if defined(__FreeBSD__)
@@ -887,9 +889,11 @@ SCLASS pthread_switch_routine_t _sched_switch_hook
 #endif
 ;
 
-/* Spare stack queue.  Stacks of default size are cached in order to reduce
+/*
+ * Spare stack queue.  Stacks of default size are cached in order to reduce
  * thread creation time.  Spare stacks are used in LIFO order to increase cache
- * locality. */
+ * locality.
+ */
 SCLASS SLIST_HEAD(, stack)	_stackq;
 
 /* Base address of next unallocated default-size stack.  Stacks are allocated