diff --git a/sys/pc98/conf/GENERICupgrade b/sys/pc98/conf/GENERICupgrade deleted file mode 100644 index 35742ad9c002..000000000000 --- a/sys/pc98/conf/GENERICupgrade +++ /dev/null @@ -1,203 +0,0 @@ -# -# GENERICupgrade (a copy of GENERIC98) -# -# This config file is used by the aout->elf transition build on systems -# not running a 3.0-CURRENT kernel. Unless a kernel is built and installed -# as part of the upgrade, the system will be hosed by the installation -# of the 3.0 binaries and subsequent reboot. If the transition build is -# being perfomed on a machine for which this config file is inappropriate, -# it should be replaced with a suitable one prior to performing the upgrade. -# -# $Id: GENERICupgrade,v 1.5 1998/10/22 11:29:55 kato Exp $ -# - -machine "pc98" -cpu "I386_CPU" -cpu "I486_CPU" -cpu "I586_CPU" -cpu "I686_CPU" -ident "GENERIC98" -maxusers 32 - -options "PC98" #PC98 -options MATH_EMULATE #Support for x87 emulation -options INET #InterNETworking -options FFS #Berkeley Fast Filesystem -options NFS #Network Filesystem -options MSDOSFS #MSDOS Filesystem -options "CD9660" #ISO 9660 Filesystem -options "CD9660_ROOT" #CD-ROM usable as root device -options FFS_ROOT #FFS usable as root device [keep this!] -options NFS_ROOT #NFS usable as root device -options PROCFS #Process filesystem -options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] -options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device -options EPSON_BOUNCEDMA #use bounce buufer for 15-16M -#options EPSON_MEMWIN #EPSON memory window support -options UCONSOLE #Allow users to grab the console -options "LINE30" -options FAILSAFE #Be conservative -options USERCONFIG #boot -c editor -options VISUAL_USERCONFIG #visual boot -c editor - -options SYSVSHM -options SYSVSEM -options SYSVMSG - -options COM_MULTIPORT - -# -# IBM-PC HDD support -#options COMPAT_ATDISK - -config kernel root on wd0 - -controller isa0 -controller pci0 - -controller fdc0 at isa? port "IO_FD1" bio irq 11 drq 2 -disk fd0 at fdc0 drive 0 -disk fd1 at fdc0 drive 1 -disk fd2 at fdc0 drive 2 -disk fd3 at fdc0 drive 3 -tape ft0 at fdc0 drive 4 - -# options "CMD640" # work around CMD640 chip deficiency -controller wdc0 at isa? port "IO_WD1" bio irq 9 -disk wd0 at wdc0 drive 0 -#disk wd1 at wdc0 drive 1 -#disk wd2 at wdc0 drive 2 -#disk wd3 at wdc0 drive 3 - -options ATAPI # Enable ATAPI support for IDE bus -options ATAPI_STATIC #Don't do it as an LKM -device wcd0 #IDE CD-ROM - -# A single entry for any of these controllers (ncr, ahb, ahc) is sufficient -# for any number of installed devices. -controller ncr0 -#controller amd0 -controller ahc0 -controller isp0 - -# -# WD33C93 SCSI card (55/92 like board) -# - -options BS_TARG_SAFEMODE - -# PC-9801-92 -#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0 -# SC-98 -# controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x10000 -# HA-55BS2 and later -#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x20000 -# ELECOM type -#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x30000 -# SMIT -#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 -# Logitec LHA-20x -#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x50000 - -#controller aic0 at isa? port 0x1840 bio irq 5 flags 0x10000 - -controller scbus0 - -device da0 - -device sa0 - -device pass0 - -device cd0 #Only need one of these, the code dynamically grows - -controller matcd0 at isa? port? bio - -# syscons is the default console driver, resembling an SCO console -device sc0 at isa? port IO_KBD tty irq 1 -#options XSERVER # support for X server - -device npx0 at isa? port IO_NPX irq 8 - -# -# Laptop support (see LINT for more options) -# -device apm0 at isa? disable flags 0x31 # Advanced Power Management - -# PCCARD (PCMCIA) support -#controller card0 -#device pcic0 at card? -#device pcic1 at card? - -device sio0 at isa? port "IO_COM1" tty irq 4 -device sio1 at isa? port 0xd2 tty irq 5 flags 0x101 -device sio2 at isa? port 0x8d2 tty flags 0x101 - -device lpt0 at isa? port IO_LPT tty -device mse0 at isa? port IO_MSE tty irq 13 - -# Order is important here due to intrusive probes, do *not* alphabetize -# this list of network interfaces until the probes have been fixed. -# Right now it appears that the ie0 must be probed before ep0. See -# revision 1.20 of this file. -device de0 -device fxp0 -device rl0 -device tl0 -device tx0 -device vx0 - -# -# DP8390 NIC -# -# ed0: generic driver -# ed1: LANEED LD-BDN -# ed2: EGY-98 -# ed3: LGY-98 -# ed4: ICM-IF-2766/EN-2298-T -# ed5: SIC-98 -# ed6: PC-9801-108 -# ed7: LA-98 -# ed8: C-NET(98) -# ed9: C-NET(98)E/L -# fe0: RE1000/1000Plus -# fe1: C-NET(98)P2/C-NET(9N)E -# -device ed0 at isa? port 0x00d0 net irq 6 -device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000 -device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000 -device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000 -device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000 -device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 -device ed6 at isa? port 0x0770 net irq 6 flags 0x800000 -device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000 -device ed8 at isa? port 0xa3d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 -device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000 - -device ep0 at isa? port 0x40d0 net irq 3 -device fe0 at isa? port 0x00d0 net irq 3 -device fe1 at isa? port 0x73d0 net irq 5 -device lnc0 at isa? port 0x03d0 net irq 6 -device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000 - -#controller snd0 -#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 -#device sbxvi0 at isa? drq 3 -#device sbmidi0 at isa? port 0x80d2 -#device opl0 at isa? port 0x28d2 -#device pcm0 at isa? port 0xa460 irq 12 -#device mss0 at isa? port 0xf40 irq 12 drq 1 - -pseudo-device loop -pseudo-device ether -pseudo-device sl 1 -pseudo-device ppp 1 -pseudo-device tun 1 -pseudo-device pty 16 -pseudo-device gzip # Exec gzipped a.out's - -# KTRACE enables the system-call tracing facility ktrace(2). -# This adds 4 KB bloat to your kernel, and slightly increases -# the costs of each syscall. -options KTRACE #kernel tracing -