3C574TX 16bit FastEtherlink PC-card support.
Reviewed by: HAMADA Naoki <nao@tom-yam.or.jp> Submitted by: Osamu MIHARA <mihara@prd.fc.nec.co.jp>
This commit is contained in:
Tatsumi Hosokawa
parent
6704748cf6
commit
6afaf5d480
@ -38,7 +38,7 @@
|
||||
*/
|
||||
|
||||
/*
|
||||
* $Id: if_ep.c,v 1.79 1999/01/31 22:41:51 dufault Exp $
|
||||
* $Id: if_ep.c,v 1.80 1999/07/06 19:22:46 des Exp $
|
||||
*
|
||||
* Promiscuous mode added and interrupt logic slightly changed
|
||||
* to reduce the number of adapter failures. Transceiver select
|
||||
@ -193,13 +193,24 @@ ep_pccard_init(devi)
|
||||
/* get_e() requires these. */
|
||||
sc->ep_io_addr = is->id_iobase;
|
||||
sc->unit = is->id_unit;
|
||||
epb->cmd_off = 0;
|
||||
if (is->id_flags & EP_FLAGS_100TX)
|
||||
epb->cmd_off = 2;
|
||||
|
||||
epb->epb_addr = is->id_iobase;
|
||||
epb->epb_used = 1;
|
||||
epb->prod_id = get_e(sc, EEPROM_PROD_ID);
|
||||
epb->mii_trans = 0;
|
||||
|
||||
/* 3C589's product id? */
|
||||
if (epb->prod_id != 0x9058) {
|
||||
/* product id */
|
||||
switch (epb->prod_id) {
|
||||
case 0x6055: /* 3C556 */
|
||||
case 0x4057: /* 3C574 */
|
||||
epb->mii_trans = 1;
|
||||
break;
|
||||
case 0x9058: /* 3C589 */
|
||||
break;
|
||||
default:
|
||||
printf("ep%d: failed to come ready.\n", is->id_unit);
|
||||
return (ENXIO);
|
||||
}
|
||||
@ -232,7 +243,7 @@ ep_pccard_attach(devi)
|
||||
sc->ep_connectors |= UTP;
|
||||
}
|
||||
if (!(sc->ep_connectors & 7))
|
||||
printf("no connectors!");
|
||||
printf("ep%d: No connectors or MII.\n", is->id_unit);
|
||||
sc->ep_connector = inw(BASE + EP_W0_ADDRESS_CFG) >> ACF_CONNECTOR_BITS;
|
||||
|
||||
/* ROM size = 0, ROM base = 0 */
|
||||
@ -244,6 +255,21 @@ ep_pccard_attach(devi)
|
||||
|
||||
outw(BASE + EP_W0_PRODUCT_ID, sc->epb->prod_id);
|
||||
|
||||
if (sc->epb->mii_trans) {
|
||||
/*
|
||||
* turn on the MII tranceiver
|
||||
*/
|
||||
GO_WINDOW(3);
|
||||
outw(BASE + EP_W3_OPTIONS, 0x8040);
|
||||
DELAY(1000);
|
||||
outw(BASE + EP_W3_OPTIONS, 0xc040);
|
||||
outw(BASE + EP_COMMAND, RX_RESET);
|
||||
outw(BASE + EP_COMMAND, TX_RESET);
|
||||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
|
||||
DELAY(1000);
|
||||
outw(BASE + EP_W3_OPTIONS, 0x8040);
|
||||
}
|
||||
|
||||
ep_attach(sc);
|
||||
|
||||
return 1;
|
||||
@ -417,7 +443,7 @@ get_e(sc, offset)
|
||||
{
|
||||
if (!eeprom_rdy(sc))
|
||||
return (0xffff);
|
||||
outw(BASE + EP_W0_EEPROM_COMMAND, EEPROM_CMD_RD | offset);
|
||||
outw(BASE + EP_W0_EEPROM_COMMAND, (EEPROM_CMD_RD << sc->epb->cmd_off) | offset);
|
||||
if (!eeprom_rdy(sc))
|
||||
return (0xffff);
|
||||
return (inw(BASE + EP_W0_EEPROM_DATA));
|
||||
|
||||
@ -31,7 +31,7 @@
|
||||
|
||||
*/
|
||||
/*
|
||||
* $Id: if_epreg.h,v 1.22 1997/10/27 06:15:10 joerg Exp $
|
||||
* $Id: if_epreg.h,v 1.23 1998/04/17 22:36:35 des Exp $
|
||||
*
|
||||
* Promiscuous mode added and interrupt logic slightly changed
|
||||
* to reduce the number of adapter failures. Transceiver select
|
||||
@ -86,6 +86,8 @@ struct ep_board {
|
||||
/* data from EEPROM for later use */
|
||||
u_short eth_addr[3]; /* Ethernet address */
|
||||
u_short prod_id; /* product ID */
|
||||
int cmd_off; /* command offset (bit shift) */
|
||||
int mii_trans; /* activate MII transiever */
|
||||
u_short res_cfg; /* resource configuration */
|
||||
};
|
||||
|
||||
@ -221,6 +223,7 @@ struct ep_board {
|
||||
/* Read */
|
||||
#define EP_W3_FREE_TX 0x0c
|
||||
#define EP_W3_FREE_RX 0x0a
|
||||
#define EP_W3_OPTIONS 0x08
|
||||
|
||||
/*
|
||||
* Window 4 registers. Diagnostics.
|
||||
@ -461,3 +464,8 @@ extern void ep_intr __P((void *sc));
|
||||
extern int ep_attach __P((struct ep_softc *sc));
|
||||
|
||||
extern u_int16_t get_e __P((struct ep_softc *sc, int offset));
|
||||
|
||||
/*
|
||||
* Config flags
|
||||
*/
|
||||
#define EP_FLAGS_100TX 0x1
|
||||
|
||||
@ -38,7 +38,7 @@
|
||||
*/
|
||||
|
||||
/*
|
||||
* $Id: if_ep.c,v 1.79 1999/01/31 22:41:51 dufault Exp $
|
||||
* $Id: if_ep.c,v 1.80 1999/07/06 19:22:46 des Exp $
|
||||
*
|
||||
* Promiscuous mode added and interrupt logic slightly changed
|
||||
* to reduce the number of adapter failures. Transceiver select
|
||||
@ -193,13 +193,24 @@ ep_pccard_init(devi)
|
||||
/* get_e() requires these. */
|
||||
sc->ep_io_addr = is->id_iobase;
|
||||
sc->unit = is->id_unit;
|
||||
epb->cmd_off = 0;
|
||||
if (is->id_flags & EP_FLAGS_100TX)
|
||||
epb->cmd_off = 2;
|
||||
|
||||
epb->epb_addr = is->id_iobase;
|
||||
epb->epb_used = 1;
|
||||
epb->prod_id = get_e(sc, EEPROM_PROD_ID);
|
||||
epb->mii_trans = 0;
|
||||
|
||||
/* 3C589's product id? */
|
||||
if (epb->prod_id != 0x9058) {
|
||||
/* product id */
|
||||
switch (epb->prod_id) {
|
||||
case 0x6055: /* 3C556 */
|
||||
case 0x4057: /* 3C574 */
|
||||
epb->mii_trans = 1;
|
||||
break;
|
||||
case 0x9058: /* 3C589 */
|
||||
break;
|
||||
default:
|
||||
printf("ep%d: failed to come ready.\n", is->id_unit);
|
||||
return (ENXIO);
|
||||
}
|
||||
@ -232,7 +243,7 @@ ep_pccard_attach(devi)
|
||||
sc->ep_connectors |= UTP;
|
||||
}
|
||||
if (!(sc->ep_connectors & 7))
|
||||
printf("no connectors!");
|
||||
printf("ep%d: No connectors or MII.\n", is->id_unit);
|
||||
sc->ep_connector = inw(BASE + EP_W0_ADDRESS_CFG) >> ACF_CONNECTOR_BITS;
|
||||
|
||||
/* ROM size = 0, ROM base = 0 */
|
||||
@ -244,6 +255,21 @@ ep_pccard_attach(devi)
|
||||
|
||||
outw(BASE + EP_W0_PRODUCT_ID, sc->epb->prod_id);
|
||||
|
||||
if (sc->epb->mii_trans) {
|
||||
/*
|
||||
* turn on the MII tranceiver
|
||||
*/
|
||||
GO_WINDOW(3);
|
||||
outw(BASE + EP_W3_OPTIONS, 0x8040);
|
||||
DELAY(1000);
|
||||
outw(BASE + EP_W3_OPTIONS, 0xc040);
|
||||
outw(BASE + EP_COMMAND, RX_RESET);
|
||||
outw(BASE + EP_COMMAND, TX_RESET);
|
||||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
|
||||
DELAY(1000);
|
||||
outw(BASE + EP_W3_OPTIONS, 0x8040);
|
||||
}
|
||||
|
||||
ep_attach(sc);
|
||||
|
||||
return 1;
|
||||
@ -417,7 +443,7 @@ get_e(sc, offset)
|
||||
{
|
||||
if (!eeprom_rdy(sc))
|
||||
return (0xffff);
|
||||
outw(BASE + EP_W0_EEPROM_COMMAND, EEPROM_CMD_RD | offset);
|
||||
outw(BASE + EP_W0_EEPROM_COMMAND, (EEPROM_CMD_RD << sc->epb->cmd_off) | offset);
|
||||
if (!eeprom_rdy(sc))
|
||||
return (0xffff);
|
||||
return (inw(BASE + EP_W0_EEPROM_DATA));
|
||||
|
||||
@ -31,7 +31,7 @@
|
||||
|
||||
*/
|
||||
/*
|
||||
* $Id: if_epreg.h,v 1.22 1997/10/27 06:15:10 joerg Exp $
|
||||
* $Id: if_epreg.h,v 1.23 1998/04/17 22:36:35 des Exp $
|
||||
*
|
||||
* Promiscuous mode added and interrupt logic slightly changed
|
||||
* to reduce the number of adapter failures. Transceiver select
|
||||
@ -86,6 +86,8 @@ struct ep_board {
|
||||
/* data from EEPROM for later use */
|
||||
u_short eth_addr[3]; /* Ethernet address */
|
||||
u_short prod_id; /* product ID */
|
||||
int cmd_off; /* command offset (bit shift) */
|
||||
int mii_trans; /* activate MII transiever */
|
||||
u_short res_cfg; /* resource configuration */
|
||||
};
|
||||
|
||||
@ -221,6 +223,7 @@ struct ep_board {
|
||||
/* Read */
|
||||
#define EP_W3_FREE_TX 0x0c
|
||||
#define EP_W3_FREE_RX 0x0a
|
||||
#define EP_W3_OPTIONS 0x08
|
||||
|
||||
/*
|
||||
* Window 4 registers. Diagnostics.
|
||||
@ -461,3 +464,8 @@ extern void ep_intr __P((void *sc));
|
||||
extern int ep_attach __P((struct ep_softc *sc));
|
||||
|
||||
extern u_int16_t get_e __P((struct ep_softc *sc, int offset));
|
||||
|
||||
/*
|
||||
* Config flags
|
||||
*/
|
||||
#define EP_FLAGS_100TX 0x1
|
||||
|
||||
Loading…
Reference in New Issue
Block a user