Fix all the spelling mistakes I could find in the man pages for words

that have at least 3 characters.

MFC after:	1 week
Thanks to:	Music band ``Chingon''
		for keeping me company while searching for these.

lib/libarchive/archive_entry.3

@@ -250,7 +250,7 @@ String data can be set or accessed as wide character strings
 or normal
 .Va char
 strings.
-The funtions that use wide character strings are suffixed with
+The functions that use wide character strings are suffixed with
 .Cm _w .
 Note that these are different representations of the same data:
 For example, if you store a narrow string and read the corresponding

lib/libarchive/archive_read.3

@@ -194,7 +194,7 @@ the
 .Fn archive_read_data_block
 function avoids copying data and allows you to correctly handle
 sparse files, as supported by some archive formats.
-The library gaurantees that offsets will increase and that blocks
+The library guarantees that offsets will increase and that blocks
 will not overlap.
 Note that the blocks returned from this function can be much larger
 than the block size read from disk, due to compression
@@ -272,7 +272,7 @@ Complete the archive and invoke the close callback.
 .It Fn archive_read_finish
 Invokes
 .Fn archive_read_close
-if it was not invoked maually, then release all resources.
+if it was not invoked manually, then release all resources.
 .El
 .Pp
 Note that the library determines most of the relevant information about
@@ -341,7 +341,7 @@ on success.
 On failure, the callback should invoke
 .Fn archive_set_error
 to register an error code and message and
-regurn
+return
 .Cm ARCHIVE_FATAL.
 .Sh EXAMPLE
 The following illustrates basic usage of the library.

lib/libautofs/libautofs.3

@@ -79,11 +79,11 @@
 .Sh DESCRIPTION
 The
 .Nm libautofs
-libarary provides a "mostly" stable interface to the
+library provides a "mostly" stable interface to the
 .Xr autofs 9
 file system.
 .Pp
-The inteface to
+The interface to
 .Xr autofs 9
 is managed via handles of type
 .Fa autoh_t
@@ -172,7 +172,7 @@ return the inode associated with the request
 return the directory inode associated with the request
 .Fa req .
 .It Fn autoreq_getaux
-return the auxilliray data associated with the request
+return the auxiliary data associated with the request
 .Fa req .
 .It Fn autoreq_getoffset
 return the offset request associated with the request
@@ -197,16 +197,16 @@ inode to
 this is typically unused.
 .It Fn autoreq_seterrno
 set the error returned to the application sending the request, typically
-this is left alone, or set to ENOENT if the request is for a non-existant
+this is left alone, or set to ENOENT if the request is for a non-existent
 name.
 The default error is no error.
 Meaning the application will see
 a successful return.
 .It Fn autoreq_setaux
-used to set the auxilliray data for a request, currently used to set
+used to set the auxiliary data for a request, currently used to set
 the dirent structures for serving a readdir request.
 Default is no
-auxilliary data.
+auxiliary data.
 .It Fn autoreq_seteof
 used to set the eof flag for readdir requests (default is not eof.)
 .El

lib/libc/net/inet6_rth_space.3

@@ -85,7 +85,7 @@ of the type, specified in the
 .Fa type
 argument and containing the number of addresses specified in the
 .Fa segments
-argumment.
+argument.
 When the type is
 .Dv IPV6_RTHDR_TYPE_0
 the number of segments must be from 0 through 127.

lib/libc/posix1e/acl_get_entry.3

@@ -64,7 +64,7 @@ set to
 .Dv ACL_NEXT_ENTRY
 when there has not been either an initial successful call to
 .Fn acl_get_entry ,
-or a previous successfull call to
+or a previous successful call to
 .Fn acl_create_entry ,
 .Fn acl_delete_entry ,
 .Fn acl_dup ,
@@ -79,7 +79,7 @@ then the result is unspecified.
 .Sh RETURN VALUES
 If the
 .Fn acl_get_entry
-function successfully obtains an ACL entry, a value of 1 is returned.
+function successfuly obtains an ACL entry, a value of 1 is returned.
 If the ACL has no ACL entries, the
 .Fn acl_get_entry
 returns a value of 0.

lib/libc/posix1e/mac.3

@@ -165,7 +165,7 @@ To join this list, see the
 .Fx
 POSIX.1e implementation page
 for more information.
-However, the resemblence of these APIs to the POSIX APIs is only loose,
+However, the resemblance of these APIs to the POSIX APIs is only loose,
 as the POSIX APIs were unable to express many notions required for
 flexible and extensible access control.
 .Sh HISTORY

lib/libc/posix1e/mac_prepare.3

@@ -89,7 +89,7 @@ The
 .Fn mac_prepare_ifnet_label ,
 and
 .Fn mac_prepare_process_label
-functions are equivilent to invocations of
+functions are equivalent to invocations of
 .Fn mac_prepare_type
 with arguments of
 .Qq file ,

lib/libc/stdtime/strftime.3

@@ -115,7 +115,7 @@ The sequences
 are supposed to provide alternate
 representations.
 .Pp
-Additionly %OB implemented
+Additionally %OB implemented
 to represent alternative months names
 (used standalone, without day mentioned).
 .It Cm %e

lib/libc/sys/kse.2

@@ -489,7 +489,7 @@ may contain any of the following bits OR'ed together:
 Block upcalls from happening.
 The thread is in some critical section.
 .It Dv KMF_NOCOMPLETED , KMF_DONE , KMF_BOUND
-This thread should be considerred to be permanently bound to
+This thread should be considered to be permanently bound to
 its KSE, and treated much like a non-threaded process would be.
 It is a
 .Dq "long term"
@@ -497,7 +497,7 @@ version of
 .Dv KMF_NOUPCALL
 in some ways.
 .It Dv KMF_WAITSIGEVENT
-Implement charactersitics needed for the signal delivery thread.
+Implement characteristics needed for the signal delivery thread.
 .El
 .\"
 .Ss Thread Mailboxes

lib/libc/sys/uuidgen.2

@@ -51,7 +51,7 @@ When no IEEE 802
 address is available for the node field, a random multicast address is
 generated for each invocation of the system call.
 According to the algorithm of generating time-based UUIDs, this will also
-force a new random clock sequence, thereby increasing the likelyhood for
+force a new random clock sequence, thereby increasing the likelihood for
 the identifier to be unique.
 .Pp
 When multiple identifiers are to be generated, the

share/man/man4/man4.i386/acpi_ibm.4

@@ -152,7 +152,7 @@ ThinkLight Button
 .It Li 512
 Screen Expand (Fn + F8)
 .It Li 1024
-Brighness Up/Down Button
+Brightness Up/Down Button
 .It Li 2048
 Volume Up/Down/Mute Button
 .El

share/man/man4/man4.i386/acpi_panasonic.4

@@ -46,7 +46,7 @@ It may also work on other models as well.
 The driver consists of three functionalities.
 The first is to detect hotkey events and take corresponding actions,
 which include changing LCD luminance and speaker mute state.
-The second role is to notify occurences of the event by way of
+The second role is to notify occurrences of the event by way of
 .Xr devctl 4
 and eventually to
 .Xr devd 8 .

share/man/man4/man4.i386/ep.4

@@ -163,10 +163,10 @@ Look for conflicts with other devices.
 The driver couldn't allocate the interrupt it wanted.
 Look for conflicts, although sharing interrupts for PC Card is normal.
 .It ep0: No connectors!
-The driver querried the hardware for what ethernet attachment were
+The driver queried the hardware for what ethernet attachment were
 present, but the hardware reported none that the driver recognized.
 .It ep0: Unable to get Ethernet address!
-The driver was unabel to read the ethernet address from the EEPROM.
+The driver was unable to read the ethernet address from the EEPROM.
 This is likely the result of the card being wedged.
 .It ep0: if_alloc() failed
 The driver was unable to allocate a ifnet structure.

share/man/man4/man4.i386/pbio.4

@@ -119,7 +119,7 @@ seconds
 will result in no more than one value being read or written every
 .Ar n
 seconds.
-Single byte read/write opeations will take at least
+Single byte read/write operations will take at least
 .Ar n
 seconds to complete.
 .Pp

share/man/man4/man4.i386/snc.4

@@ -81,7 +81,7 @@ as
 Accessing
 .Tn SONIC
 card data structures and registers as 32 bit values
-makes code endianess independent.
+makes code endianness independent.
 The
 .Tn SONIC
 is however always in big-endian mode so it is necessary to

share/man/man4/man4.sparc64/openprom.4

@@ -125,7 +125,7 @@ call and whether the
 .Vt "struct openpromio"
 is used to pass in or return data,
 .Va oprom_array
-either contains an integer refereing to a node or a string refering to a
+either contains an integer referring to a node or a string referring to a
 property name or property value.
 The maximum size of
 .Va oprom_array

share/man/man4/man4.sparc64/snd_audiocs.4

@@ -43,7 +43,7 @@ to attach to the CS4231 audio device.
 Speaker output is enabled by default.
 SBus based
 .Tn UltraSPARC
-workstations have no internel CD-ROM audio input capability.
+workstations have no internal CD-ROM audio input capability.
 .Sh HARDWARE
 The
 .Nm

share/man/man4/witness.4

@@ -93,7 +93,7 @@ set via the read-only sysctl
 .Pp
 The sysctl
 .Va debug.witness.watch
-specifies the level of witness involvment in the system.
+specifies the level of witness involvement in the system.
 A value of 1 specifies that witness is enabled.
 A value of 0 specifies that witness is disabled.
 This sysctl can be written to in order to

share/man/man5/devfs.conf.5

@@ -85,7 +85,7 @@ This action changes the permissions of
 .Ar devname .
 The
 .Ar arg
-paramater must be a
+parameter must be a
 .Ar mode
 as explained in
 .Xr chmod 1 .

share/man/man9/ifnet.9

@@ -1006,7 +1006,7 @@ A reference count of requests for this particular membership.
 .It Fn if_alloc
 Allocate and initialize
 .Vt "struct ifnet" .
-Initalization includes the allocation of an interface index and may
+Initialization includes the allocation of an interface index and may
 include the allocation of a
 .Fa type
 specific structure in

share/man/man9/printf.9

@@ -1,6 +1,6 @@
 .\"
 .\" Copyright (c) 2001 Andrew R. Reiter
-.\" Copyritht (c) 2004 Joerg Wunsch
+.\" Copyright (c) 2004 Joerg Wunsch
 .\" All rights reserved.
 .\"
 .\" Redistribution and use in source and binary forms, with or without

usr.bin/file2c/file2c.1

@@ -23,7 +23,7 @@ The
 .Nm
 utility reads a file from stdin and writes it to stdout, converting each
 byte to its decimal or hexadecimal representation on the fly.
-The byte values are seperated by a comma.
+The byte values are separated by a comma.
 This also means that the last byte value is not followed by a comma.
 By default the byte values are printed in decimal, but when the
 .Fl x

usr.bin/indent/indent.1

@@ -213,7 +213,7 @@ Parenthesized expressions have extra indentation added to
 indicate the nesting, unless
 .Fl \&lp
 is in effect
-or the contination indent is exactly half of the main indent.
+or the continuation indent is exactly half of the main indent.
 .Fl \&ci
 defaults to the same value as
 .Fl i .
@@ -411,7 +411,7 @@ If the output file is not specified, the default is standard output,
 rather than formatting in place.
 .It Fl ut , nut
 Enables (disables) the use of tab characters in the output.
-Tabs are assumed to be aligned on columns divisble by 8.
+Tabs are assumed to be aligned on columns divisible by 8.
 The default is
 .Fl ut .
 .It Fl v , \&nv

usr.bin/lockf/lockf.1

@@ -44,7 +44,7 @@ utility acquires an exclusive lock on a
 .Ar file ,
 creating it if necessary,
 .Bf Em
-and removing the file on exit unless explictly told not to.
+and removing the file on exit unless explicitly told not to.
 .Ef
 While holding the lock, it executes a
 .Ar command

usr.bin/make/make.1

@@ -628,7 +628,7 @@ variable from the environment,
 all sequences of a backslash and one of space or tab
 are replaced just with their second character
 without causing a word break.
-Any other occurences of a backslash are retained.
+Any other occurrences of a backslash are retained.
 Groups of unquoted space, tab and newline characters cause word
 breaking.
 .It Va MFLAGS

usr.bin/systat/systat.1

@@ -289,7 +289,7 @@ for particular uses, i.e., data, socket structures, etc.
 .It Ic vmstat
 Take over the entire display and show a (rather crowded) compendium
 of statistics related to virtual memory usage, process scheduling,
-device interrupts, system name translation cacheing, disk
+device interrupts, system name translation caching, disk
 .Tn I/O
 etc.
 .Pp

usr.bin/truss/truss.1

@@ -27,7 +27,7 @@ It does this by stopping and restarting the process being monitored via
 The options are as follows:
 .Bl -tag -width indent
 .It Fl f
-Trace decendants of the original traced process created by
+Trace descendants of the original traced process created by
 .Xr fork 2 ,
 .Xr vfork 2 ,
 etc.

usr.bin/xinstall/install.1

@@ -198,7 +198,7 @@ option is specified, or the
 .Fl C
 or
 .Fl p
-option is used in conjuction with the
+option is used in conjunction with the
 .Fl s
 option, temporary files named
 .Pa INS@XXXX ,

usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8

@@ -76,8 +76,8 @@ and connect to the Internet.
 .Pp
 In the server mode,
 .Nm
-opens an RFCOMM socket and listens for incomming connections from remote clients.
-Once the new incomming connection is accepted,
+opens an RFCOMM socket and listens for incoming connections from remote clients.
+Once the new incoming connection is accepted,
 .Nm
 forks and executes
 .Xr ppp 8
@@ -278,7 +278,7 @@ The RFCOMM server will listen on local address
 .Li 00:01:02:03:04:05
 and channel
 .Li 1 .
-Once the incomming connection has been accepted,
+Once the incoming connection has been accepted,
 .Nm
 will execute
 .Xr ppp 8

usr.sbin/bluetooth/sdpd/sdpd.8

@@ -43,7 +43,7 @@ The
 daemon keeps track of the Bluetooth services registered on the host
 and responds to Service Discovery inquiries from the remote Bluetooth devices.
 .Pp
-In order to use any service remote Bluetooth device need to send Sevice
+In order to use any service remote Bluetooth device need to send Service
 Search and Service Attribute or Service Search Attribute request over
 Bluetooth L2CAP connection on SDP PSM (0x0001).
 The
@@ -108,7 +108,7 @@ In case of multiple Bluetooth devices connected to the same host it is
 possible to specify which services should be
 .Dq bound
 to which Bluetooth device.
-Such assigment should be done at service registration time.
+Such assignment should be done at service registration time.
 .Pp
 Access rights on the control socket define which application can register,
 remove or change the service.

usr.sbin/bsnmpd/modules/snmp_netgraph/snmp_netgraph.3

@@ -170,7 +170,7 @@ Each of these functions takes the following arguments:
 .It Fa cookie
 is the node specific command cookie,
 .It Fa opcode
-is the node specific code for the operation to performa,
+is the node specific code for the operation to perform,
 .It Fa arg
 is a pointer to the message itself.
 This message must start with a
@@ -208,7 +208,7 @@ and waits for a matching response.
 All three functions take the same arguments as the
 .Fn ng_output*
 functions.
-The functions return the reponse message in a buffer allocated by
+The functions return the response message in a buffer allocated by
 .Xr malloc 3
 or NULL in case of an error.
 The maximum size of the response buffer can be
@@ -223,14 +223,14 @@ hook through which to send the data, a pointer to the message buffer and
 the size of the message.
 It returns -1 if an error happens.
 .Ss ASYNCHRONOUS CONTROL AND DATA MESSAGES
-A module can register functions to asynchronuosly receive control and data
+A module can register functions to asynchronously receive control and data
 message.
 .Pp
 The function
 .Fn ng_register_cookie
 registers a control message receive function.
 If a control message is
-received, that is not consumed by the dialog functions, the list of registerred
+received, that is not consumed by the dialog functions, the list of registered
 control message receive functions is scanned.
 If the cookie in the received
 message is the same as the
@@ -256,7 +256,7 @@ to the same cookie and node id.
 A control message registration can be undone by calling
 .Fn ng_unregister_cookie
 with the return value of the registration call.
-If an error occures while registering,
+If an error occurs while registering,
 .Fn ng_register_cookie
 returns NULL.
 .Pp
@@ -275,7 +275,7 @@ The message should be treated as read-only.
 A data message registration can be undone by calling
 .Fn ng_unregister_hook
 with the return value of the registration call.
-If an error occures while registering,
+If an error occurs while registering,
 .Fn ng_register_hook
 returns NULL.
 .Pp
@@ -348,7 +348,7 @@ is not NULL, the function checks, that the peer node's type is
 .Fa type .
 The function skips intermediate tee nodes (see
 .Xr ng_tee 4 ) .
-It returns the node id of the peer node or 0 if an error occurres or the
+It returns the node id of the peer node or 0 if an error occurs or the
 types do not match.
 .Ss CHANGING THE GRAPH
 A number of functions can be used to create or destroy nodes and hooks.

usr.sbin/i4b/isdnd/isdnd.rc.5

@@ -406,7 +406,7 @@ The number of outgoing calls allowed within the time period specified by
 .Em budget-calloutperiod .
 (optional)
 .It Li budget-calloutsfile
-A path/filename to which the number of successfull callouts are written.
+A path/filename to which the number of successful callouts are written.
 The contents of the file is preserved when it exists during startup of isdnd.
 The format of this file is: start time, last update time, number of calls.
 (optional)
@@ -415,7 +415,7 @@ If set to
 .Em on
 rotate budget-calloutsfile every night when an attempt is made to update
 the file on a new day.
-The statistics for the previous day are witten to
+The statistics for the previous day are written to
 a file with the filename specified by budget-calloutsfile to which a hyphen
 and the new day's (!) day of month number is appended.
 (optional)

usr.sbin/mtree/mtree.8

@@ -135,7 +135,7 @@ The output format in this case is somewhat remniscent of
 .Xr comm 1 ,
 having "in first spec only", "in second spec only", and "different"
 columns, prefixed by zero, one and two TAB characters respectively.
-Each entry in the "different" column occupies two lines, one from each specfication.
+Each entry in the "different" column occupies two lines, one from each specification.
 .It Fl K Ar keywords
 Add the specified (whitespace or comma separated)
 .Ar keywords

usr.sbin/ndiscvt/ndiscvt.8

@@ -80,7 +80,7 @@ The
 .Pa .INF
 file is typically required since only it contains device
 identification data such as PCI vendor and device IDs or PCMCIA
-indentifier strings.
+identifier strings.
 The
 .Pa .INF
 file may be optionally omitted however,

usr.sbin/ntp/doc/ntpdc.8

@@ -227,7 +227,7 @@ server is maintaining state.
 These should include all configured
 peer associations as well as those peers whose stratum is such that
 they are considered by the server to be possible future
-synchonization candidates.
+synchronization candidates.
 .It Ic peers
 Obtains a list of peers for which the server is maintaining
 state, along with a summary of that state.

usr.sbin/pppd/pppd.8

@@ -245,7 +245,7 @@ When this is completed, pppd will commence passing data packets
 The \fIdemand\fR option implies the \fIpersist\fR option.  If this
 behaviour is not desired, use the \fInopersist\fR option after the
 \fIdemand\fR option.  The \fIidle\fR and \fIholdoff\fR
-options are also useful in conjuction with the \fIdemand\fR option.
+options are also useful in conjunction with the \fIdemand\fR option.
 .TP
 .B domain \fId
 Append the domain name \fId\fR to the local host name for authentication
@@ -378,7 +378,7 @@ send before it rejects the options.
 The default value is 3.
 .TP
 .B ipxcp-max-terminate \fIn
-Set the maximum nuber of IPXCP terminate request frames before the
+Set the maximum number of IPXCP terminate request frames before the
 local system considers that the peer is not listening to them.
 The
 default value is 3.

usr.sbin/syslogd/syslog.conf.5

@@ -220,7 +220,7 @@ from any host but the one specified.
 If the hostname is given as
 .Ql @ ,
 the local hostname will be used.
-As for program specifications, multiple comma-seprarated
+As for program specifications, multiple comma-separated
 values may be specified for hostname specifications.
 .Pp
 A

usr.sbin/wpa/wpa_supplicant/wpa_supplicant.conf.5

@@ -135,7 +135,7 @@ or hex string enclosed in quotation marks.
 SSID scan technique; 0 (default) or 1.
 Technique 0 scans for the SSID using a broadcast Probe Request
 frame while 1 uses a directed Probe Request frame.
-Access points that cloak themself by not braodcasting their SSID
+Access points that cloak themselves by not broadcasting their SSID
 require technique 1, but beware that this scheme can cause scanning
 to take longer to complete.
 .It Va bssid