s/controller/device/ as per config(8)
This commit is contained in:
Peter Wemm
parent
62d128b859
commit
70c43495f8
@ -57,20 +57,20 @@ options SYSVMSG #SYSV-style message queues
|
||||
options SYSVSEM #SYSV-style semaphores
|
||||
|
||||
# Standard busses
|
||||
controller isa0
|
||||
controller pci0
|
||||
device isa0
|
||||
device pci0
|
||||
|
||||
# Floppy drives
|
||||
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fd0 at fdc0 drive 0
|
||||
|
||||
# ATA and ATAPI devices
|
||||
# This is work in progress, use at your own risk.
|
||||
# It currently reuses the majors of wd.c and friends.
|
||||
# It cannot co-exist with the old system in one kernel.
|
||||
# You only need one "controller ata0" for it to find all
|
||||
# You only need one "device ata0" for it to find all
|
||||
# PCI devices on modern machines.
|
||||
controller ata0
|
||||
device ata0
|
||||
device atadisk0 # ATA disk drives
|
||||
device atapicd0 # ATAPI CDROM drives
|
||||
device atapifd0 # ATAPI floppy drives
|
||||
@ -79,22 +79,22 @@ device atapist0 # ATAPI tape drives
|
||||
# SCSI Controllers
|
||||
# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is
|
||||
# sufficient for any number of installed devices.
|
||||
controller ahc0 # AHA2940 and onboard AIC7xxx devices
|
||||
#controller esp0
|
||||
controller isp0 # Qlogic family
|
||||
controller ncr0 # NCR/Symbios Logic
|
||||
controller sym0 # NCR/Symbios Logic (newer chipsets)
|
||||
device ahc0 # AHA2940 and onboard AIC7xxx devices
|
||||
#device esp0
|
||||
device isp0 # Qlogic family
|
||||
device ncr0 # NCR/Symbios Logic
|
||||
device sym0 # NCR/Symbios Logic (newer chipsets)
|
||||
|
||||
# SCSI peripherals
|
||||
# Only one of each of these is needed, they are dynamically allocated.
|
||||
controller scbus0 # SCSI bus (required)
|
||||
device scbus0 # SCSI bus (required)
|
||||
device da0 # Direct Access (disks)
|
||||
device sa0 # Sequential Access (tape etc)
|
||||
device cd0 # CD
|
||||
device pass0 # Passthrough device (direct SCSI access)
|
||||
|
||||
# atkbdc0 controls both the keyboard and the PS/2 mouse
|
||||
controller atkbdc0 at isa? port IO_KBD
|
||||
device atkbdc0 at isa? port IO_KBD
|
||||
device atkbd0 at atkbdc? irq 1
|
||||
device psm0 at atkbdc? irq 12
|
||||
|
||||
@ -120,7 +120,7 @@ device wx0 # Intel Gigabit Ethernet Card (``Wiseman'')
|
||||
device le0 # Lance
|
||||
|
||||
# PCI Ethernet NICs that use the common MII bus controller code.
|
||||
controller miibus0 # MII bus support
|
||||
device miibus0 # MII bus support
|
||||
device dc0 # DEC/Intel 21143 and workalikes
|
||||
device rl0 # RealTek 8129/8139
|
||||
device sf0 # Adaptec AIC-6915 (``Starfire'')
|
||||
@ -145,14 +145,14 @@ pseudo-device md # Memory "disks"
|
||||
pseudo-device bpf #Berkeley packet filter
|
||||
|
||||
# USB support
|
||||
#controller uhci0 # UHCI PCI->USB interface
|
||||
#controller ohci0 # OHCI PCI->USB interface
|
||||
#controller usb0 # USB Bus (required)
|
||||
#device uhci0 # UHCI PCI->USB interface
|
||||
#device ohci0 # OHCI PCI->USB interface
|
||||
#device usb0 # USB Bus (required)
|
||||
#device ugen0 # Generic
|
||||
#device uhid0 # "Human Interface Devices"
|
||||
#device ukbd0 # Keyboard
|
||||
#device ulpt0 # Printer
|
||||
#controller umass0 # Disks/Mass storage - Requires scbus and da0
|
||||
#device umass0 # Disks/Mass storage - Requires scbus and da0
|
||||
#device ums0 # Mouse
|
||||
#device aue0 # ADMtek USB ethernet
|
||||
#device kue0 # Kawasaki LSI USB ethernet
|
||||
|
||||
@ -57,20 +57,20 @@ options SYSVMSG #SYSV-style message queues
|
||||
options SYSVSEM #SYSV-style semaphores
|
||||
|
||||
# Standard busses
|
||||
controller isa0
|
||||
controller pci0
|
||||
device isa0
|
||||
device pci0
|
||||
|
||||
# Floppy drives
|
||||
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fd0 at fdc0 drive 0
|
||||
|
||||
# ATA and ATAPI devices
|
||||
# This is work in progress, use at your own risk.
|
||||
# It currently reuses the majors of wd.c and friends.
|
||||
# It cannot co-exist with the old system in one kernel.
|
||||
# You only need one "controller ata0" for it to find all
|
||||
# You only need one "device ata0" for it to find all
|
||||
# PCI devices on modern machines.
|
||||
controller ata0
|
||||
device ata0
|
||||
device atadisk0 # ATA disk drives
|
||||
device atapicd0 # ATAPI CDROM drives
|
||||
device atapifd0 # ATAPI floppy drives
|
||||
@ -79,22 +79,22 @@ device atapist0 # ATAPI tape drives
|
||||
# SCSI Controllers
|
||||
# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is
|
||||
# sufficient for any number of installed devices.
|
||||
controller ahc0 # AHA2940 and onboard AIC7xxx devices
|
||||
#controller esp0
|
||||
controller isp0 # Qlogic family
|
||||
controller ncr0 # NCR/Symbios Logic
|
||||
controller sym0 # NCR/Symbios Logic (newer chipsets)
|
||||
device ahc0 # AHA2940 and onboard AIC7xxx devices
|
||||
#device esp0
|
||||
device isp0 # Qlogic family
|
||||
device ncr0 # NCR/Symbios Logic
|
||||
device sym0 # NCR/Symbios Logic (newer chipsets)
|
||||
|
||||
# SCSI peripherals
|
||||
# Only one of each of these is needed, they are dynamically allocated.
|
||||
controller scbus0 # SCSI bus (required)
|
||||
device scbus0 # SCSI bus (required)
|
||||
device da0 # Direct Access (disks)
|
||||
device sa0 # Sequential Access (tape etc)
|
||||
device cd0 # CD
|
||||
device pass0 # Passthrough device (direct SCSI access)
|
||||
|
||||
# atkbdc0 controls both the keyboard and the PS/2 mouse
|
||||
controller atkbdc0 at isa? port IO_KBD
|
||||
device atkbdc0 at isa? port IO_KBD
|
||||
device atkbd0 at atkbdc? irq 1
|
||||
device psm0 at atkbdc? irq 12
|
||||
|
||||
@ -120,7 +120,7 @@ device wx0 # Intel Gigabit Ethernet Card (``Wiseman'')
|
||||
device le0 # Lance
|
||||
|
||||
# PCI Ethernet NICs that use the common MII bus controller code.
|
||||
controller miibus0 # MII bus support
|
||||
device miibus0 # MII bus support
|
||||
device dc0 # DEC/Intel 21143 and workalikes
|
||||
device rl0 # RealTek 8129/8139
|
||||
device sf0 # Adaptec AIC-6915 (``Starfire'')
|
||||
@ -145,14 +145,14 @@ pseudo-device md # Memory "disks"
|
||||
pseudo-device bpf #Berkeley packet filter
|
||||
|
||||
# USB support
|
||||
#controller uhci0 # UHCI PCI->USB interface
|
||||
#controller ohci0 # OHCI PCI->USB interface
|
||||
#controller usb0 # USB Bus (required)
|
||||
#device uhci0 # UHCI PCI->USB interface
|
||||
#device ohci0 # OHCI PCI->USB interface
|
||||
#device usb0 # USB Bus (required)
|
||||
#device ugen0 # Generic
|
||||
#device uhid0 # "Human Interface Devices"
|
||||
#device ukbd0 # Keyboard
|
||||
#device ulpt0 # Printer
|
||||
#controller umass0 # Disks/Mass storage - Requires scbus and da0
|
||||
#device umass0 # Disks/Mass storage - Requires scbus and da0
|
||||
#device ums0 # Mouse
|
||||
#device aue0 # ADMtek USB ethernet
|
||||
#device kue0 # Kawasaki LSI USB ethernet
|
||||
|
||||
@ -35,15 +35,15 @@ options UCONSOLE #Allow users to grab the console
|
||||
|
||||
config kernel root on da0
|
||||
|
||||
controller pci0
|
||||
controller tlsb0
|
||||
controller gbus0
|
||||
controller kft0
|
||||
controller dwlpx0
|
||||
device pci0
|
||||
device tlsb0
|
||||
device gbus0
|
||||
device kft0
|
||||
device dwlpx0
|
||||
|
||||
controller simos0
|
||||
device simos0
|
||||
|
||||
controller scbus0
|
||||
device scbus0
|
||||
|
||||
device da0
|
||||
|
||||
|
||||
108
sys/conf/NOTES
108
sys/conf/NOTES
@ -726,10 +726,10 @@ options _KPOSIX_VERSION=199309L
|
||||
|
||||
# The syntax for wiring down devices is:
|
||||
|
||||
# controller scbus0 at ahc0 # Single bus device
|
||||
# controller scbus1 at ahc1 bus 0 # Single bus device
|
||||
# controller scbus3 at ahc2 bus 0 # Twin bus device
|
||||
# controller scbus2 at ahc2 bus 1 # Twin bus device
|
||||
# device scbus0 at ahc0 # Single bus device
|
||||
# device scbus1 at ahc1 bus 0 # Single bus device
|
||||
# device scbus3 at ahc2 bus 0 # Twin bus device
|
||||
# device scbus2 at ahc2 bus 1 # Twin bus device
|
||||
# device da0 at scbus0 target 0 unit 0
|
||||
# device da1 at scbus3 target 1
|
||||
# device da2 at scbus2 target 3
|
||||
@ -744,7 +744,7 @@ options _KPOSIX_VERSION=199309L
|
||||
# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
|
||||
# configuration and doesn't have to be explicitly configured.
|
||||
|
||||
controller scbus0 #base SCSI code
|
||||
device scbus0 #base SCSI code
|
||||
device ch0 #SCSI media changers
|
||||
device da0 #SCSI direct access devices (aka disks)
|
||||
device sa0 #SCSI tapes
|
||||
@ -861,7 +861,7 @@ options MSGBUF_SIZE=40960
|
||||
#
|
||||
# Mandatory ISA devices: isa, npx
|
||||
#
|
||||
controller isa0
|
||||
device isa0
|
||||
|
||||
#
|
||||
# Options for `isa':
|
||||
@ -913,7 +913,7 @@ options PPS_SYNC
|
||||
options NTIMECOUNTER=20
|
||||
|
||||
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
||||
controller atkbdc0 at isa? port IO_KBD
|
||||
device atkbdc0 at isa? port IO_KBD
|
||||
|
||||
# The AT keyboard
|
||||
device atkbd0 at atkbdc? irq 1
|
||||
@ -1057,11 +1057,11 @@ device npx0 at nexus? port IO_NPX flags 0x0 irq 13
|
||||
# probed correctly.
|
||||
#
|
||||
|
||||
controller bt0 at isa? port IO_BT0 irq ?
|
||||
controller adv0 at isa? port ? irq ?
|
||||
controller adw0
|
||||
controller aha0 at isa? port ? irq ?
|
||||
controller aic0 at isa? port ? irq ?
|
||||
device bt0 at isa? port IO_BT0 irq ?
|
||||
device adv0 at isa? port ? irq ?
|
||||
device adw0
|
||||
device aha0 at isa? port ? irq ?
|
||||
device aic0 at isa? port ? irq ?
|
||||
|
||||
#
|
||||
# Compaq Smart RAID controller. This driver also uses the major number
|
||||
@ -1069,22 +1069,22 @@ controller aic0 at isa? port ? irq ?
|
||||
# Only one line of each is needed, the code finds all available controllers
|
||||
# and devices.
|
||||
#
|
||||
controller ida0
|
||||
device ida0
|
||||
device id0
|
||||
|
||||
#
|
||||
# Mylex DAC960, AMI MegaRAID controllers. Only one entry is needed; the code
|
||||
# will find and configure all supported controllers.
|
||||
#
|
||||
controller mlx0 # Mylex DAC960
|
||||
controller amr0 # AMI MegaRAID
|
||||
device mlx0 # Mylex DAC960
|
||||
device amr0 # AMI MegaRAID
|
||||
|
||||
#
|
||||
# The 'ATA' driver supports all ATA and ATAPI devices.
|
||||
# It can reuse the majors of wd.c for booting purposes.
|
||||
# You only need one "controller ata0" for it to find all
|
||||
# PCI ATA/ATAPI devices on modern machines.
|
||||
controller ata0
|
||||
device ata0
|
||||
device atadisk0 # ATA disk drives
|
||||
device atapicd0 # ATAPI CDROM drives
|
||||
device atapifd0 # ATAPI floppy drives
|
||||
@ -1106,8 +1106,8 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
|
||||
#
|
||||
# For older non-PCI systems, this is the lines to use:
|
||||
#controller ata0 at isa? port IO_WD1 irq 14
|
||||
#controller ata1 at isa? port IO_WD2 irq 15
|
||||
#device ata0 at isa? port IO_WD1 irq 14
|
||||
#device ata1 at isa? port IO_WD2 irq 15
|
||||
|
||||
#
|
||||
# ST-506, ESDI, and IDE hard disks: `wdc' and `wd'
|
||||
@ -1131,7 +1131,7 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# specification with the low 16 bits for drive 0, and the high 16 bits
|
||||
# for drive 1.
|
||||
# e.g.:
|
||||
#controller wdc0 at isa? port IO_WD1 irq 14 flags 0x00ff8004
|
||||
#device wdc0 at isa? port IO_WD1 irq 14 flags 0x00ff8004
|
||||
#
|
||||
# specifies that drive 0 will be allowed to probe for 32 bit transfers and
|
||||
# a maximum multi-sector transfer of 4 sectors, and drive 1 will not be
|
||||
@ -1142,11 +1142,11 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# mode (for example, it is a 2nd IDE PCI interface), then use config line(s)
|
||||
# such as:
|
||||
#
|
||||
#controller wdc2 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wdc2 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wd4 at wdc2 drive 0
|
||||
#device wd5 at wdc2 drive 1
|
||||
#
|
||||
#controller wdc3 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wdc3 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wd6 at wdc3 drive 0
|
||||
#device wd7 at wdc3 drive 1
|
||||
#
|
||||
@ -1157,10 +1157,10 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# This driver must be commented out because it is mutually exclusive with
|
||||
# the ata(4) driver.
|
||||
#
|
||||
#controller wdc0 at isa? port IO_WD1 irq 14
|
||||
#device wdc0 at isa? port IO_WD1 irq 14
|
||||
#device wd0 at wdc0 drive 0
|
||||
#device wd1 at wdc0 drive 1
|
||||
#controller wdc1 at isa? port IO_WD2 irq 15
|
||||
#device wdc1 at isa? port IO_WD2 irq 15
|
||||
#device wd2 at wdc1 drive 0
|
||||
#device wd3 at wdc1 drive 1
|
||||
|
||||
@ -1185,7 +1185,7 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
#
|
||||
# Standard floppy disk controllers and floppy tapes: `fdc', `fd', and `ft'
|
||||
#
|
||||
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
#
|
||||
# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
|
||||
# gotta turn it actually on by setting the variable fd_debug with DDB,
|
||||
@ -1195,7 +1195,7 @@ options FDC_DEBUG
|
||||
# Activate this line instead of the fdc0 line above if you happen to
|
||||
# have an Insight floppy tape. Probing them proved to be dangerous
|
||||
# for people with floppy disks only, so it's "hidden" behind a flag:
|
||||
#controller fdc0 at isa? port IO_FD1 flags 1 irq 6 drq 2
|
||||
#device fdc0 at isa? port IO_FD1 flags 1 irq 6 drq 2
|
||||
|
||||
device fd0 at fdc0 drive 0
|
||||
device fd1 at fdc0 drive 1
|
||||
@ -1384,7 +1384,7 @@ options NATM #native ATM
|
||||
# Controls all "VOXWARE" driver sound devices. See Luigi's driver
|
||||
# below for an alternate which may work better for some cards.
|
||||
#
|
||||
controller snd0
|
||||
device snd0
|
||||
device pas0 at isa? port 0x388 irq 10 drq 6
|
||||
device sb0 at isa? port 0x220 irq 5 drq 1
|
||||
device sbxvi0 at isa? drq 5
|
||||
@ -1535,7 +1535,7 @@ device mcd0 at isa? port 0x300 irq 10
|
||||
# for the Sony CDU31/33A CDROM
|
||||
device scd0 at isa? port 0x230
|
||||
# for the SoundBlaster 16 multicd - up to 4 devices
|
||||
controller matcd0 at isa? port 0x230
|
||||
device matcd0 at isa? port 0x230
|
||||
device wt0 at isa? port 0x300 irq 5 drq 1
|
||||
device ctx0 at isa? port 0x230 iomem 0xd0000
|
||||
device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000
|
||||
@ -1575,7 +1575,7 @@ device xrpu0
|
||||
#
|
||||
# The 'ep' device provides support for the 3Com 3C529 ethernet card.
|
||||
#
|
||||
controller mca0
|
||||
device mca0
|
||||
|
||||
#
|
||||
# EISA devices:
|
||||
@ -1590,9 +1590,9 @@ controller mca0
|
||||
#
|
||||
# fea: DEC DEFEA EISA FDDI adapter
|
||||
#
|
||||
controller eisa0
|
||||
controller ahb0
|
||||
controller ahc0
|
||||
device eisa0
|
||||
device ahb0
|
||||
device ahc0
|
||||
device fea0
|
||||
|
||||
# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
|
||||
@ -1621,7 +1621,7 @@ options EISA_SLOTS=12
|
||||
# the generic miibus API and all of the PHY drivers, including a
|
||||
# generic one for PHYs that aren't specifically handled by an
|
||||
# individual driver.
|
||||
controller miibus0
|
||||
device miibus0
|
||||
|
||||
#
|
||||
# PCI devices & PCI options:
|
||||
@ -1785,12 +1785,12 @@ controller miibus0
|
||||
# The oltr driver supports the following Olicom PCI token-ring adapters
|
||||
# OC-3136, OC-3137, OC-3139, OC-3140, OC-3141, OC-3540, OC-3250
|
||||
#
|
||||
controller pci0
|
||||
controller ahc1
|
||||
controller amd0
|
||||
controller ncr0
|
||||
controller sym0
|
||||
controller isp0
|
||||
device pci0
|
||||
device ahc1
|
||||
device amd0
|
||||
device ncr0
|
||||
device sym0
|
||||
device isp0
|
||||
#
|
||||
# Options for ISP
|
||||
#
|
||||
@ -1891,9 +1891,9 @@ device bktr0
|
||||
#
|
||||
# card: pccard slots
|
||||
# pcic: isa/pccard bridge
|
||||
controller pcic0 at isa?
|
||||
controller pcic1 at isa?
|
||||
controller card0
|
||||
device pcic0 at isa?
|
||||
device pcic1 at isa?
|
||||
device card0
|
||||
|
||||
# You may need to reset all pccards after resuming
|
||||
options PCIC_RESUME_RESET # reset after resume
|
||||
@ -1924,9 +1924,9 @@ options POWERFAIL_NMI # make it beep instead of panicing
|
||||
# intpm Intel PIIX4 Power Management Unit
|
||||
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
|
||||
#
|
||||
controller smbus0
|
||||
controller intpm0
|
||||
controller alpm0
|
||||
device smbus0
|
||||
device intpm0
|
||||
device alpm0
|
||||
|
||||
device smb0 at smbus?
|
||||
|
||||
@ -1947,14 +1947,14 @@ device smb0 at smbus?
|
||||
# Other:
|
||||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||||
#
|
||||
controller iicbus0
|
||||
controller iicbb0
|
||||
device iicbus0
|
||||
device iicbb0
|
||||
|
||||
device ic0 at iicbus?
|
||||
device iic0 at iicbus?
|
||||
device iicsmb0 at iicbus?
|
||||
|
||||
controller pcf0 at isa? port 0x320 irq 5
|
||||
device pcf0 at isa? port 0x320 irq 5
|
||||
|
||||
# ISDN4BSD section
|
||||
#
|
||||
@ -2129,8 +2129,8 @@ options LPT_DEBUG # Printer driver debug
|
||||
options PPC_DEBUG # Parallel chipset level debug
|
||||
options PLIP_DEBUG # Parallel network IP interface debug
|
||||
|
||||
controller ppbus0
|
||||
controller vpo0 at ppbus?
|
||||
device ppbus0
|
||||
device vpo0 at ppbus?
|
||||
device lpt0 at ppbus?
|
||||
device plip0 at ppbus?
|
||||
device ppi0 at ppbus?
|
||||
@ -2321,7 +2321,7 @@ options VM_KMEM_SIZE_SCALE
|
||||
# instead of fudging it. Only enable this if you
|
||||
# are 100% certain you need it.
|
||||
|
||||
controller dpt0
|
||||
device dpt0
|
||||
|
||||
# DPT options
|
||||
#!CAM# options DPT_MEASURE_PERFORMANCE
|
||||
@ -2333,11 +2333,11 @@ options DPT_ALLOW_MEMIO
|
||||
|
||||
# USB support
|
||||
# UHCI controller
|
||||
controller uhci0
|
||||
device uhci0
|
||||
# OHCI controller
|
||||
controller ohci0
|
||||
device ohci0
|
||||
# General USB code (mandatory for USB)
|
||||
controller usb0
|
||||
device usb0
|
||||
#
|
||||
# Generic USB device driver
|
||||
device ugen0
|
||||
@ -2348,7 +2348,7 @@ device ukbd0
|
||||
# USB printer
|
||||
device ulpt0
|
||||
# USB Iomega Zip 100 Drive
|
||||
controller umass0
|
||||
device umass0
|
||||
# USB mouse
|
||||
device ums0
|
||||
#
|
||||
|
||||
@ -726,10 +726,10 @@ options _KPOSIX_VERSION=199309L
|
||||
|
||||
# The syntax for wiring down devices is:
|
||||
|
||||
# controller scbus0 at ahc0 # Single bus device
|
||||
# controller scbus1 at ahc1 bus 0 # Single bus device
|
||||
# controller scbus3 at ahc2 bus 0 # Twin bus device
|
||||
# controller scbus2 at ahc2 bus 1 # Twin bus device
|
||||
# device scbus0 at ahc0 # Single bus device
|
||||
# device scbus1 at ahc1 bus 0 # Single bus device
|
||||
# device scbus3 at ahc2 bus 0 # Twin bus device
|
||||
# device scbus2 at ahc2 bus 1 # Twin bus device
|
||||
# device da0 at scbus0 target 0 unit 0
|
||||
# device da1 at scbus3 target 1
|
||||
# device da2 at scbus2 target 3
|
||||
@ -744,7 +744,7 @@ options _KPOSIX_VERSION=199309L
|
||||
# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
|
||||
# configuration and doesn't have to be explicitly configured.
|
||||
|
||||
controller scbus0 #base SCSI code
|
||||
device scbus0 #base SCSI code
|
||||
device ch0 #SCSI media changers
|
||||
device da0 #SCSI direct access devices (aka disks)
|
||||
device sa0 #SCSI tapes
|
||||
@ -861,7 +861,7 @@ options MSGBUF_SIZE=40960
|
||||
#
|
||||
# Mandatory ISA devices: isa, npx
|
||||
#
|
||||
controller isa0
|
||||
device isa0
|
||||
|
||||
#
|
||||
# Options for `isa':
|
||||
@ -913,7 +913,7 @@ options PPS_SYNC
|
||||
options NTIMECOUNTER=20
|
||||
|
||||
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
||||
controller atkbdc0 at isa? port IO_KBD
|
||||
device atkbdc0 at isa? port IO_KBD
|
||||
|
||||
# The AT keyboard
|
||||
device atkbd0 at atkbdc? irq 1
|
||||
@ -1057,11 +1057,11 @@ device npx0 at nexus? port IO_NPX flags 0x0 irq 13
|
||||
# probed correctly.
|
||||
#
|
||||
|
||||
controller bt0 at isa? port IO_BT0 irq ?
|
||||
controller adv0 at isa? port ? irq ?
|
||||
controller adw0
|
||||
controller aha0 at isa? port ? irq ?
|
||||
controller aic0 at isa? port ? irq ?
|
||||
device bt0 at isa? port IO_BT0 irq ?
|
||||
device adv0 at isa? port ? irq ?
|
||||
device adw0
|
||||
device aha0 at isa? port ? irq ?
|
||||
device aic0 at isa? port ? irq ?
|
||||
|
||||
#
|
||||
# Compaq Smart RAID controller. This driver also uses the major number
|
||||
@ -1069,22 +1069,22 @@ controller aic0 at isa? port ? irq ?
|
||||
# Only one line of each is needed, the code finds all available controllers
|
||||
# and devices.
|
||||
#
|
||||
controller ida0
|
||||
device ida0
|
||||
device id0
|
||||
|
||||
#
|
||||
# Mylex DAC960, AMI MegaRAID controllers. Only one entry is needed; the code
|
||||
# will find and configure all supported controllers.
|
||||
#
|
||||
controller mlx0 # Mylex DAC960
|
||||
controller amr0 # AMI MegaRAID
|
||||
device mlx0 # Mylex DAC960
|
||||
device amr0 # AMI MegaRAID
|
||||
|
||||
#
|
||||
# The 'ATA' driver supports all ATA and ATAPI devices.
|
||||
# It can reuse the majors of wd.c for booting purposes.
|
||||
# You only need one "controller ata0" for it to find all
|
||||
# PCI ATA/ATAPI devices on modern machines.
|
||||
controller ata0
|
||||
device ata0
|
||||
device atadisk0 # ATA disk drives
|
||||
device atapicd0 # ATAPI CDROM drives
|
||||
device atapifd0 # ATAPI floppy drives
|
||||
@ -1106,8 +1106,8 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
|
||||
#
|
||||
# For older non-PCI systems, this is the lines to use:
|
||||
#controller ata0 at isa? port IO_WD1 irq 14
|
||||
#controller ata1 at isa? port IO_WD2 irq 15
|
||||
#device ata0 at isa? port IO_WD1 irq 14
|
||||
#device ata1 at isa? port IO_WD2 irq 15
|
||||
|
||||
#
|
||||
# ST-506, ESDI, and IDE hard disks: `wdc' and `wd'
|
||||
@ -1131,7 +1131,7 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# specification with the low 16 bits for drive 0, and the high 16 bits
|
||||
# for drive 1.
|
||||
# e.g.:
|
||||
#controller wdc0 at isa? port IO_WD1 irq 14 flags 0x00ff8004
|
||||
#device wdc0 at isa? port IO_WD1 irq 14 flags 0x00ff8004
|
||||
#
|
||||
# specifies that drive 0 will be allowed to probe for 32 bit transfers and
|
||||
# a maximum multi-sector transfer of 4 sectors, and drive 1 will not be
|
||||
@ -1142,11 +1142,11 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# mode (for example, it is a 2nd IDE PCI interface), then use config line(s)
|
||||
# such as:
|
||||
#
|
||||
#controller wdc2 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wdc2 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wd4 at wdc2 drive 0
|
||||
#device wd5 at wdc2 drive 1
|
||||
#
|
||||
#controller wdc3 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wdc3 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wd6 at wdc3 drive 0
|
||||
#device wd7 at wdc3 drive 1
|
||||
#
|
||||
@ -1157,10 +1157,10 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# This driver must be commented out because it is mutually exclusive with
|
||||
# the ata(4) driver.
|
||||
#
|
||||
#controller wdc0 at isa? port IO_WD1 irq 14
|
||||
#device wdc0 at isa? port IO_WD1 irq 14
|
||||
#device wd0 at wdc0 drive 0
|
||||
#device wd1 at wdc0 drive 1
|
||||
#controller wdc1 at isa? port IO_WD2 irq 15
|
||||
#device wdc1 at isa? port IO_WD2 irq 15
|
||||
#device wd2 at wdc1 drive 0
|
||||
#device wd3 at wdc1 drive 1
|
||||
|
||||
@ -1185,7 +1185,7 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
#
|
||||
# Standard floppy disk controllers and floppy tapes: `fdc', `fd', and `ft'
|
||||
#
|
||||
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
#
|
||||
# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
|
||||
# gotta turn it actually on by setting the variable fd_debug with DDB,
|
||||
@ -1195,7 +1195,7 @@ options FDC_DEBUG
|
||||
# Activate this line instead of the fdc0 line above if you happen to
|
||||
# have an Insight floppy tape. Probing them proved to be dangerous
|
||||
# for people with floppy disks only, so it's "hidden" behind a flag:
|
||||
#controller fdc0 at isa? port IO_FD1 flags 1 irq 6 drq 2
|
||||
#device fdc0 at isa? port IO_FD1 flags 1 irq 6 drq 2
|
||||
|
||||
device fd0 at fdc0 drive 0
|
||||
device fd1 at fdc0 drive 1
|
||||
@ -1384,7 +1384,7 @@ options NATM #native ATM
|
||||
# Controls all "VOXWARE" driver sound devices. See Luigi's driver
|
||||
# below for an alternate which may work better for some cards.
|
||||
#
|
||||
controller snd0
|
||||
device snd0
|
||||
device pas0 at isa? port 0x388 irq 10 drq 6
|
||||
device sb0 at isa? port 0x220 irq 5 drq 1
|
||||
device sbxvi0 at isa? drq 5
|
||||
@ -1535,7 +1535,7 @@ device mcd0 at isa? port 0x300 irq 10
|
||||
# for the Sony CDU31/33A CDROM
|
||||
device scd0 at isa? port 0x230
|
||||
# for the SoundBlaster 16 multicd - up to 4 devices
|
||||
controller matcd0 at isa? port 0x230
|
||||
device matcd0 at isa? port 0x230
|
||||
device wt0 at isa? port 0x300 irq 5 drq 1
|
||||
device ctx0 at isa? port 0x230 iomem 0xd0000
|
||||
device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000
|
||||
@ -1575,7 +1575,7 @@ device xrpu0
|
||||
#
|
||||
# The 'ep' device provides support for the 3Com 3C529 ethernet card.
|
||||
#
|
||||
controller mca0
|
||||
device mca0
|
||||
|
||||
#
|
||||
# EISA devices:
|
||||
@ -1590,9 +1590,9 @@ controller mca0
|
||||
#
|
||||
# fea: DEC DEFEA EISA FDDI adapter
|
||||
#
|
||||
controller eisa0
|
||||
controller ahb0
|
||||
controller ahc0
|
||||
device eisa0
|
||||
device ahb0
|
||||
device ahc0
|
||||
device fea0
|
||||
|
||||
# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
|
||||
@ -1621,7 +1621,7 @@ options EISA_SLOTS=12
|
||||
# the generic miibus API and all of the PHY drivers, including a
|
||||
# generic one for PHYs that aren't specifically handled by an
|
||||
# individual driver.
|
||||
controller miibus0
|
||||
device miibus0
|
||||
|
||||
#
|
||||
# PCI devices & PCI options:
|
||||
@ -1785,12 +1785,12 @@ controller miibus0
|
||||
# The oltr driver supports the following Olicom PCI token-ring adapters
|
||||
# OC-3136, OC-3137, OC-3139, OC-3140, OC-3141, OC-3540, OC-3250
|
||||
#
|
||||
controller pci0
|
||||
controller ahc1
|
||||
controller amd0
|
||||
controller ncr0
|
||||
controller sym0
|
||||
controller isp0
|
||||
device pci0
|
||||
device ahc1
|
||||
device amd0
|
||||
device ncr0
|
||||
device sym0
|
||||
device isp0
|
||||
#
|
||||
# Options for ISP
|
||||
#
|
||||
@ -1891,9 +1891,9 @@ device bktr0
|
||||
#
|
||||
# card: pccard slots
|
||||
# pcic: isa/pccard bridge
|
||||
controller pcic0 at isa?
|
||||
controller pcic1 at isa?
|
||||
controller card0
|
||||
device pcic0 at isa?
|
||||
device pcic1 at isa?
|
||||
device card0
|
||||
|
||||
# You may need to reset all pccards after resuming
|
||||
options PCIC_RESUME_RESET # reset after resume
|
||||
@ -1924,9 +1924,9 @@ options POWERFAIL_NMI # make it beep instead of panicing
|
||||
# intpm Intel PIIX4 Power Management Unit
|
||||
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
|
||||
#
|
||||
controller smbus0
|
||||
controller intpm0
|
||||
controller alpm0
|
||||
device smbus0
|
||||
device intpm0
|
||||
device alpm0
|
||||
|
||||
device smb0 at smbus?
|
||||
|
||||
@ -1947,14 +1947,14 @@ device smb0 at smbus?
|
||||
# Other:
|
||||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||||
#
|
||||
controller iicbus0
|
||||
controller iicbb0
|
||||
device iicbus0
|
||||
device iicbb0
|
||||
|
||||
device ic0 at iicbus?
|
||||
device iic0 at iicbus?
|
||||
device iicsmb0 at iicbus?
|
||||
|
||||
controller pcf0 at isa? port 0x320 irq 5
|
||||
device pcf0 at isa? port 0x320 irq 5
|
||||
|
||||
# ISDN4BSD section
|
||||
#
|
||||
@ -2129,8 +2129,8 @@ options LPT_DEBUG # Printer driver debug
|
||||
options PPC_DEBUG # Parallel chipset level debug
|
||||
options PLIP_DEBUG # Parallel network IP interface debug
|
||||
|
||||
controller ppbus0
|
||||
controller vpo0 at ppbus?
|
||||
device ppbus0
|
||||
device vpo0 at ppbus?
|
||||
device lpt0 at ppbus?
|
||||
device plip0 at ppbus?
|
||||
device ppi0 at ppbus?
|
||||
@ -2321,7 +2321,7 @@ options VM_KMEM_SIZE_SCALE
|
||||
# instead of fudging it. Only enable this if you
|
||||
# are 100% certain you need it.
|
||||
|
||||
controller dpt0
|
||||
device dpt0
|
||||
|
||||
# DPT options
|
||||
#!CAM# options DPT_MEASURE_PERFORMANCE
|
||||
@ -2333,11 +2333,11 @@ options DPT_ALLOW_MEMIO
|
||||
|
||||
# USB support
|
||||
# UHCI controller
|
||||
controller uhci0
|
||||
device uhci0
|
||||
# OHCI controller
|
||||
controller ohci0
|
||||
device ohci0
|
||||
# General USB code (mandatory for USB)
|
||||
controller usb0
|
||||
device usb0
|
||||
#
|
||||
# Generic USB device driver
|
||||
device ugen0
|
||||
@ -2348,7 +2348,7 @@ device ukbd0
|
||||
# USB printer
|
||||
device ulpt0
|
||||
# USB Iomega Zip 100 Drive
|
||||
controller umass0
|
||||
device umass0
|
||||
# USB mouse
|
||||
device ums0
|
||||
#
|
||||
|
||||
@ -726,10 +726,10 @@ options _KPOSIX_VERSION=199309L
|
||||
|
||||
# The syntax for wiring down devices is:
|
||||
|
||||
# controller scbus0 at ahc0 # Single bus device
|
||||
# controller scbus1 at ahc1 bus 0 # Single bus device
|
||||
# controller scbus3 at ahc2 bus 0 # Twin bus device
|
||||
# controller scbus2 at ahc2 bus 1 # Twin bus device
|
||||
# device scbus0 at ahc0 # Single bus device
|
||||
# device scbus1 at ahc1 bus 0 # Single bus device
|
||||
# device scbus3 at ahc2 bus 0 # Twin bus device
|
||||
# device scbus2 at ahc2 bus 1 # Twin bus device
|
||||
# device da0 at scbus0 target 0 unit 0
|
||||
# device da1 at scbus3 target 1
|
||||
# device da2 at scbus2 target 3
|
||||
@ -744,7 +744,7 @@ options _KPOSIX_VERSION=199309L
|
||||
# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
|
||||
# configuration and doesn't have to be explicitly configured.
|
||||
|
||||
controller scbus0 #base SCSI code
|
||||
device scbus0 #base SCSI code
|
||||
device ch0 #SCSI media changers
|
||||
device da0 #SCSI direct access devices (aka disks)
|
||||
device sa0 #SCSI tapes
|
||||
@ -861,7 +861,7 @@ options MSGBUF_SIZE=40960
|
||||
#
|
||||
# Mandatory ISA devices: isa, npx
|
||||
#
|
||||
controller isa0
|
||||
device isa0
|
||||
|
||||
#
|
||||
# Options for `isa':
|
||||
@ -913,7 +913,7 @@ options PPS_SYNC
|
||||
options NTIMECOUNTER=20
|
||||
|
||||
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
||||
controller atkbdc0 at isa? port IO_KBD
|
||||
device atkbdc0 at isa? port IO_KBD
|
||||
|
||||
# The AT keyboard
|
||||
device atkbd0 at atkbdc? irq 1
|
||||
@ -1057,11 +1057,11 @@ device npx0 at nexus? port IO_NPX flags 0x0 irq 13
|
||||
# probed correctly.
|
||||
#
|
||||
|
||||
controller bt0 at isa? port IO_BT0 irq ?
|
||||
controller adv0 at isa? port ? irq ?
|
||||
controller adw0
|
||||
controller aha0 at isa? port ? irq ?
|
||||
controller aic0 at isa? port ? irq ?
|
||||
device bt0 at isa? port IO_BT0 irq ?
|
||||
device adv0 at isa? port ? irq ?
|
||||
device adw0
|
||||
device aha0 at isa? port ? irq ?
|
||||
device aic0 at isa? port ? irq ?
|
||||
|
||||
#
|
||||
# Compaq Smart RAID controller. This driver also uses the major number
|
||||
@ -1069,22 +1069,22 @@ controller aic0 at isa? port ? irq ?
|
||||
# Only one line of each is needed, the code finds all available controllers
|
||||
# and devices.
|
||||
#
|
||||
controller ida0
|
||||
device ida0
|
||||
device id0
|
||||
|
||||
#
|
||||
# Mylex DAC960, AMI MegaRAID controllers. Only one entry is needed; the code
|
||||
# will find and configure all supported controllers.
|
||||
#
|
||||
controller mlx0 # Mylex DAC960
|
||||
controller amr0 # AMI MegaRAID
|
||||
device mlx0 # Mylex DAC960
|
||||
device amr0 # AMI MegaRAID
|
||||
|
||||
#
|
||||
# The 'ATA' driver supports all ATA and ATAPI devices.
|
||||
# It can reuse the majors of wd.c for booting purposes.
|
||||
# You only need one "controller ata0" for it to find all
|
||||
# PCI ATA/ATAPI devices on modern machines.
|
||||
controller ata0
|
||||
device ata0
|
||||
device atadisk0 # ATA disk drives
|
||||
device atapicd0 # ATAPI CDROM drives
|
||||
device atapifd0 # ATAPI floppy drives
|
||||
@ -1106,8 +1106,8 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
|
||||
#
|
||||
# For older non-PCI systems, this is the lines to use:
|
||||
#controller ata0 at isa? port IO_WD1 irq 14
|
||||
#controller ata1 at isa? port IO_WD2 irq 15
|
||||
#device ata0 at isa? port IO_WD1 irq 14
|
||||
#device ata1 at isa? port IO_WD2 irq 15
|
||||
|
||||
#
|
||||
# ST-506, ESDI, and IDE hard disks: `wdc' and `wd'
|
||||
@ -1131,7 +1131,7 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# specification with the low 16 bits for drive 0, and the high 16 bits
|
||||
# for drive 1.
|
||||
# e.g.:
|
||||
#controller wdc0 at isa? port IO_WD1 irq 14 flags 0x00ff8004
|
||||
#device wdc0 at isa? port IO_WD1 irq 14 flags 0x00ff8004
|
||||
#
|
||||
# specifies that drive 0 will be allowed to probe for 32 bit transfers and
|
||||
# a maximum multi-sector transfer of 4 sectors, and drive 1 will not be
|
||||
@ -1142,11 +1142,11 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# mode (for example, it is a 2nd IDE PCI interface), then use config line(s)
|
||||
# such as:
|
||||
#
|
||||
#controller wdc2 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wdc2 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wd4 at wdc2 drive 0
|
||||
#device wd5 at wdc2 drive 1
|
||||
#
|
||||
#controller wdc3 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wdc3 at isa? port 0 irq ? flags 0xa0ffa0ff
|
||||
#device wd6 at wdc3 drive 0
|
||||
#device wd7 at wdc3 drive 1
|
||||
#
|
||||
@ -1157,10 +1157,10 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
# This driver must be commented out because it is mutually exclusive with
|
||||
# the ata(4) driver.
|
||||
#
|
||||
#controller wdc0 at isa? port IO_WD1 irq 14
|
||||
#device wdc0 at isa? port IO_WD1 irq 14
|
||||
#device wd0 at wdc0 drive 0
|
||||
#device wd1 at wdc0 drive 1
|
||||
#controller wdc1 at isa? port IO_WD2 irq 15
|
||||
#device wdc1 at isa? port IO_WD2 irq 15
|
||||
#device wd2 at wdc1 drive 0
|
||||
#device wd3 at wdc1 drive 1
|
||||
|
||||
@ -1185,7 +1185,7 @@ options ATA_ENABLE_ATAPI_DMA
|
||||
#
|
||||
# Standard floppy disk controllers and floppy tapes: `fdc', `fd', and `ft'
|
||||
#
|
||||
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
device fdc0 at isa? port IO_FD1 irq 6 drq 2
|
||||
#
|
||||
# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
|
||||
# gotta turn it actually on by setting the variable fd_debug with DDB,
|
||||
@ -1195,7 +1195,7 @@ options FDC_DEBUG
|
||||
# Activate this line instead of the fdc0 line above if you happen to
|
||||
# have an Insight floppy tape. Probing them proved to be dangerous
|
||||
# for people with floppy disks only, so it's "hidden" behind a flag:
|
||||
#controller fdc0 at isa? port IO_FD1 flags 1 irq 6 drq 2
|
||||
#device fdc0 at isa? port IO_FD1 flags 1 irq 6 drq 2
|
||||
|
||||
device fd0 at fdc0 drive 0
|
||||
device fd1 at fdc0 drive 1
|
||||
@ -1384,7 +1384,7 @@ options NATM #native ATM
|
||||
# Controls all "VOXWARE" driver sound devices. See Luigi's driver
|
||||
# below for an alternate which may work better for some cards.
|
||||
#
|
||||
controller snd0
|
||||
device snd0
|
||||
device pas0 at isa? port 0x388 irq 10 drq 6
|
||||
device sb0 at isa? port 0x220 irq 5 drq 1
|
||||
device sbxvi0 at isa? drq 5
|
||||
@ -1535,7 +1535,7 @@ device mcd0 at isa? port 0x300 irq 10
|
||||
# for the Sony CDU31/33A CDROM
|
||||
device scd0 at isa? port 0x230
|
||||
# for the SoundBlaster 16 multicd - up to 4 devices
|
||||
controller matcd0 at isa? port 0x230
|
||||
device matcd0 at isa? port 0x230
|
||||
device wt0 at isa? port 0x300 irq 5 drq 1
|
||||
device ctx0 at isa? port 0x230 iomem 0xd0000
|
||||
device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000
|
||||
@ -1575,7 +1575,7 @@ device xrpu0
|
||||
#
|
||||
# The 'ep' device provides support for the 3Com 3C529 ethernet card.
|
||||
#
|
||||
controller mca0
|
||||
device mca0
|
||||
|
||||
#
|
||||
# EISA devices:
|
||||
@ -1590,9 +1590,9 @@ controller mca0
|
||||
#
|
||||
# fea: DEC DEFEA EISA FDDI adapter
|
||||
#
|
||||
controller eisa0
|
||||
controller ahb0
|
||||
controller ahc0
|
||||
device eisa0
|
||||
device ahb0
|
||||
device ahc0
|
||||
device fea0
|
||||
|
||||
# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
|
||||
@ -1621,7 +1621,7 @@ options EISA_SLOTS=12
|
||||
# the generic miibus API and all of the PHY drivers, including a
|
||||
# generic one for PHYs that aren't specifically handled by an
|
||||
# individual driver.
|
||||
controller miibus0
|
||||
device miibus0
|
||||
|
||||
#
|
||||
# PCI devices & PCI options:
|
||||
@ -1785,12 +1785,12 @@ controller miibus0
|
||||
# The oltr driver supports the following Olicom PCI token-ring adapters
|
||||
# OC-3136, OC-3137, OC-3139, OC-3140, OC-3141, OC-3540, OC-3250
|
||||
#
|
||||
controller pci0
|
||||
controller ahc1
|
||||
controller amd0
|
||||
controller ncr0
|
||||
controller sym0
|
||||
controller isp0
|
||||
device pci0
|
||||
device ahc1
|
||||
device amd0
|
||||
device ncr0
|
||||
device sym0
|
||||
device isp0
|
||||
#
|
||||
# Options for ISP
|
||||
#
|
||||
@ -1891,9 +1891,9 @@ device bktr0
|
||||
#
|
||||
# card: pccard slots
|
||||
# pcic: isa/pccard bridge
|
||||
controller pcic0 at isa?
|
||||
controller pcic1 at isa?
|
||||
controller card0
|
||||
device pcic0 at isa?
|
||||
device pcic1 at isa?
|
||||
device card0
|
||||
|
||||
# You may need to reset all pccards after resuming
|
||||
options PCIC_RESUME_RESET # reset after resume
|
||||
@ -1924,9 +1924,9 @@ options POWERFAIL_NMI # make it beep instead of panicing
|
||||
# intpm Intel PIIX4 Power Management Unit
|
||||
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
|
||||
#
|
||||
controller smbus0
|
||||
controller intpm0
|
||||
controller alpm0
|
||||
device smbus0
|
||||
device intpm0
|
||||
device alpm0
|
||||
|
||||
device smb0 at smbus?
|
||||
|
||||
@ -1947,14 +1947,14 @@ device smb0 at smbus?
|
||||
# Other:
|
||||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||||
#
|
||||
controller iicbus0
|
||||
controller iicbb0
|
||||
device iicbus0
|
||||
device iicbb0
|
||||
|
||||
device ic0 at iicbus?
|
||||
device iic0 at iicbus?
|
||||
device iicsmb0 at iicbus?
|
||||
|
||||
controller pcf0 at isa? port 0x320 irq 5
|
||||
device pcf0 at isa? port 0x320 irq 5
|
||||
|
||||
# ISDN4BSD section
|
||||
#
|
||||
@ -2129,8 +2129,8 @@ options LPT_DEBUG # Printer driver debug
|
||||
options PPC_DEBUG # Parallel chipset level debug
|
||||
options PLIP_DEBUG # Parallel network IP interface debug
|
||||
|
||||
controller ppbus0
|
||||
controller vpo0 at ppbus?
|
||||
device ppbus0
|
||||
device vpo0 at ppbus?
|
||||
device lpt0 at ppbus?
|
||||
device plip0 at ppbus?
|
||||
device ppi0 at ppbus?
|
||||
@ -2321,7 +2321,7 @@ options VM_KMEM_SIZE_SCALE
|
||||
# instead of fudging it. Only enable this if you
|
||||
# are 100% certain you need it.
|
||||
|
||||
controller dpt0
|
||||
device dpt0
|
||||
|
||||
# DPT options
|
||||
#!CAM# options DPT_MEASURE_PERFORMANCE
|
||||
@ -2333,11 +2333,11 @@ options DPT_ALLOW_MEMIO
|
||||
|
||||
# USB support
|
||||
# UHCI controller
|
||||
controller uhci0
|
||||
device uhci0
|
||||
# OHCI controller
|
||||
controller ohci0
|
||||
device ohci0
|
||||
# General USB code (mandatory for USB)
|
||||
controller usb0
|
||||
device usb0
|
||||
#
|
||||
# Generic USB device driver
|
||||
device ugen0
|
||||
@ -2348,7 +2348,7 @@ device ukbd0
|
||||
# USB printer
|
||||
device ulpt0
|
||||
# USB Iomega Zip 100 Drive
|
||||
controller umass0
|
||||
device umass0
|
||||
# USB mouse
|
||||
device ums0
|
||||
#
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user