d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

General clean-up [0/1]: content

Browse Source 
Clear extraneous Nm arguments.
Clarify some English.
Mark netgraph and ifconfig up as a cross-reference.
Remove apostrophe from a genitive ``its''.
This commit is contained in:
Sheldon Hearn 2000-07-20 11:43:40 +00:00
parent 144d39d4b8
commit 7d28680e93
1 changed files with 26 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
share/man/man4/udbp.4
View File

@ -42,41 +42,52 @@
The
.Nm
driver provides support for host-to-host cables that contain at least two
bulk pipes, one for each direction, like for example the EzLink cable and
bulk pipes (one for each direction), for example the EzLink cable and
the NetChip 1080 chip.
.Pp
It requires netgraph to be avalable. This can be done either by adding
.\" XXX The description of how to add netgraph to the kernel
.\" is out of place here. It should be limited to the
.\" netgraph(4) manpage only. However, that page does
.\" not yet give instructions for kldload(8) for the
.\" clueless. Working on it -- sheldonh
It requires
.Xr netgraph 4
to be avalable. This can be done either by adding
.Cd "options NETGRAPH"
to your kernel configuration file, or alternatively loading
.Nm netgraph
as a module either from
.Xr netgraph 4
as a module, either from
.Pa /boot/loader.conf
or from the command line, before the udbp module.
or from the command line, before the
.Nm
module.
.Sh EXAMPLE
.Dl options NETGRAPH
.Dl device udbp
.Pp
Add the
.Nm udbp
.Nm
driver to the kernel.
.Pp
.Dl kldload netgraph
.Dl kldload udbp
.Pp
Load the
.Nm netgraph
.Xr netgraph 4
module and then the
.Nm udbp
.Nm
driver.
.Pp
.Dl ngctl mkpeer udbp0: iface data inet
.Dl ifconfig ng0 10.0.0.1 10.0.0.2
.Pp
Create a new network interface node node and connect it's inet hook to the data
Create a new network interface node and connect its inet hook to the data
hook of the
.Nm udbp
node. Ifconfig configures the resulting network interface ng0 with a local
IP address of 10.0.0.1 and a remote 10.0.0.2. On the remote host the two
.Nm
node.
.Xr ifconfig 8
configures the resulting network interface ng0 with a local
IP address of 10.0.0.1 and a remote IP address of 10.0.0.2. On the remote host, the two
IP addresses should of course be reversed.
.Pp
.Sh SEE ALSO
@ -84,16 +95,16 @@ IP addresses should of course be reversed.
.Xr ohci 4 ,
.Xr uhci 4 ,
.Xr usb 4 ,
.Xr ngctl 8 ,
.Xr ng_iface 8 ,
.Xr ngctl 8
.Sh HISTORY
The
.Nm udbp
.Nm
driver first appeared in
.Fx 5.0 .
.Sh AUTHORS
The
.Nm udbp
.Nm
driver was written by
.An Doug Ambrisko Aq ambrisko@whistle.com ,
.An Julian Elischer Aq julian@whistle.com