d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Some very small tweaks to hardware.hlp.

Browse Source 
Submitted by:	joerg & jkh
This commit is contained in:
Jordan K. Hubbard 1995-06-10 01:25:28 +00:00
parent abb91fd6e4
commit 99404406dc
2 changed files with 16 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
release/sysinstall/help/en_US.ISO8859-1/hardware.hlp
View File

@ -1,4 +1,4 @@
Hardware Documentation Guide: $Id: hardware.hlp,v 1.10 1995/06/09 08:29:16 jkh Exp $
Hardware Documentation Guide: $Id: hardware.hlp,v 1.11 1995/06/09 13:29:19 jkh Exp $
Table of Contents
-----------------
@ -84,8 +84,8 @@ settings for all the drivers present in the booted kernel, and
once you have located an entry of interest you may use the displayed
device name to change its settings or even disable the driver completely.
For example, to change the address of network adapter 'ed0' to the
address 0xd4000, you would type
For example, to change the memory address of network adapter 'ed0' to
the address 0xd4000, you would type
config> iomem ed0 0xd4000
-----------------
@ -128,7 +128,7 @@ disable any device that resides at the same port or IRQ as a device
you actually have!
You can also remove drivers that are not needed by building yourself a
custom kernel that contains only the device deviers which your system
custom kernel that contains only the device drivers which your system
really needs (see section 6.0 of the FreeBSD.FAQ). If your system has
sufficient free disk space to store and compile the kernel sources,
this is the option we most highly recommend.
@ -145,7 +145,7 @@ placed on your computer during the FreeBSD installation process.
installation floppy diskettes.)
The table describes the various parameters used by the driver to communicate
with the hardware in your system. There are four parameters in the
with the hardware in your system. There are four parameters in the
table, but not all are used by each device. They are:
Port the starting I/O port used by the device, shown in hexadecimal.
@ -228,7 +228,7 @@ zp0 300 10 dyn d8000 3Com PCMCIA Etherlink III
If the hardware in your computer is not set to the same settings as
those shown in this table and the item is not marked 'dyn', you will
have to either reconfigure your hardware, or use UserConfig ('-c boot
have to either reconfigure your hardware, or use UserConfig ('-c' boot
option) to reconfigure the kernel to match the way your hardware is
currently set (see section 1.0).
@ -275,7 +275,7 @@ mss: Microsoft Sound System
nic: Dr Neuhaus NICCY 3008, 3009 & 5000 ISDN cards
opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
pas: ProAudioSpectrum PCM and MIDI
pca: PCM audio through your PC speaker
pca: PCM audio ("/dev/audio") through your PC speaker
psm: PS/2 mouse port
rc: RISCom/8 multiport card
sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
@ -323,7 +323,7 @@ A: Your card is probably on a different IRQ from what is specified in the
Q: I go to boot from the hard disk for the first time after installing
FreeBSD, but the Boot Manger prompt just prints `F?' and the boot menu
FreeBSD, but the Boot Manager prompt just prints `F?' at the boot menu
each time but the boot won't go any further.
A: The hard disk geometry was set incorrectly in the Partition editor when

16
release/sysinstall/help/en_US.ISO_8859-1/hardware.hlp
View File

@ -1,4 +1,4 @@
Hardware Documentation Guide: $Id: hardware.hlp,v 1.10 1995/06/09 08:29:16 jkh Exp $
Hardware Documentation Guide: $Id: hardware.hlp,v 1.11 1995/06/09 13:29:19 jkh Exp $
Table of Contents
-----------------
@ -84,8 +84,8 @@ settings for all the drivers present in the booted kernel, and
once you have located an entry of interest you may use the displayed
device name to change its settings or even disable the driver completely.
For example, to change the address of network adapter 'ed0' to the
address 0xd4000, you would type
For example, to change the memory address of network adapter 'ed0' to
the address 0xd4000, you would type
config> iomem ed0 0xd4000
-----------------
@ -128,7 +128,7 @@ disable any device that resides at the same port or IRQ as a device
you actually have!
You can also remove drivers that are not needed by building yourself a
custom kernel that contains only the device deviers which your system
custom kernel that contains only the device drivers which your system
really needs (see section 6.0 of the FreeBSD.FAQ). If your system has
sufficient free disk space to store and compile the kernel sources,
this is the option we most highly recommend.
@ -145,7 +145,7 @@ placed on your computer during the FreeBSD installation process.
installation floppy diskettes.)
The table describes the various parameters used by the driver to communicate
with the hardware in your system. There are four parameters in the
with the hardware in your system. There are four parameters in the
table, but not all are used by each device. They are:
Port the starting I/O port used by the device, shown in hexadecimal.
@ -228,7 +228,7 @@ zp0 300 10 dyn d8000 3Com PCMCIA Etherlink III
If the hardware in your computer is not set to the same settings as
those shown in this table and the item is not marked 'dyn', you will
have to either reconfigure your hardware, or use UserConfig ('-c boot
have to either reconfigure your hardware, or use UserConfig ('-c' boot
option) to reconfigure the kernel to match the way your hardware is
currently set (see section 1.0).
@ -275,7 +275,7 @@ mss: Microsoft Sound System
nic: Dr Neuhaus NICCY 3008, 3009 & 5000 ISDN cards
opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
pas: ProAudioSpectrum PCM and MIDI
pca: PCM audio through your PC speaker
pca: PCM audio ("/dev/audio") through your PC speaker
psm: PS/2 mouse port
rc: RISCom/8 multiport card
sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
@ -323,7 +323,7 @@ A: Your card is probably on a different IRQ from what is specified in the
Q: I go to boot from the hard disk for the first time after installing
FreeBSD, but the Boot Manger prompt just prints `F?' and the boot menu
FreeBSD, but the Boot Manager prompt just prints `F?' at the boot menu
each time but the boot won't go any further.
A: The hard disk geometry was set incorrectly in the Partition editor when