Various changes from Matt Thomas to improve media selection and fix
support for the DC21140.
This commit is contained in:
David Greenman
parent
54f835a545
commit
9b798f72a1
@ -21,7 +21,7 @@
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $Id: if_de.c,v 1.19 1995/03/21 22:41:18 se Exp $
|
||||
* $Id: if_de.c,v 1.20 1995/04/09 04:46:15 davidg Exp $
|
||||
*
|
||||
*/
|
||||
|
||||
@ -165,7 +165,23 @@ typedef struct {
|
||||
#define TULIP_TXDESCS 128
|
||||
#define TULIP_RXQ_TARGET 8
|
||||
|
||||
typedef enum {
|
||||
TULIP_DC21040_GENERIC,
|
||||
TULIP_DC21140_DEC_EB,
|
||||
TULIP_DC21140_DEC_DE500
|
||||
} tulip_board_t;
|
||||
|
||||
typedef struct _tulip_softc_t tulip_softc_t;
|
||||
|
||||
typedef struct {
|
||||
tulip_board_t bd_type;
|
||||
const char *bd_description;
|
||||
int (*bd_media_probe)(tulip_softc_t *sc);
|
||||
void (*bd_media_select)(tulip_softc_t *sc);
|
||||
} tulip_boardsw_t;
|
||||
|
||||
|
||||
struct _tulip_softc_t {
|
||||
struct arpcom tulip_ac;
|
||||
tulip_regfile_t tulip_csrs;
|
||||
unsigned tulip_flags;
|
||||
@ -179,6 +195,7 @@ typedef struct {
|
||||
tulip_uint32_t tulip_intrmask;
|
||||
tulip_uint32_t tulip_cmdmode;
|
||||
tulip_uint32_t tulip_revinfo;
|
||||
const tulip_boardsw_t *tulip_boardsw;
|
||||
#if NBPFILTER > 0
|
||||
caddr_t tulip_bpf; /* BPF context */
|
||||
#endif
|
||||
@ -186,15 +203,15 @@ typedef struct {
|
||||
struct ifqueue tulip_rxq;
|
||||
tulip_ringinfo_t tulip_rxinfo;
|
||||
tulip_ringinfo_t tulip_txinfo;
|
||||
} tulip_softc_t;
|
||||
};
|
||||
|
||||
#ifndef IFF_ALTPHYS
|
||||
#define IFF_ALTPHYS IFF_LINK0 /* In case it isn't defined */
|
||||
#define IFF_ALTPHYS IFF_LINK2 /* In case it isn't defined */
|
||||
#endif
|
||||
typedef enum { TULIP_DC21040, TULIP_DC21140, TULIP_DC21041 } tulip_chipid_t;
|
||||
const char *tulip_chipdescs[] = {
|
||||
"DC21040 [10Mb/s]",
|
||||
"DC21140 [10/100Mb/s]",
|
||||
"DC21140 [10-100Mb/s]",
|
||||
"DC21041 [10Mb/s]"
|
||||
};
|
||||
|
||||
@ -231,6 +248,147 @@ static void tulip_addr_filter(tulip_softc_t *sc);
|
||||
#define TULIP_RESET(sc) tulip_reset((sc)->tulip_unit, 0)
|
||||
#endif
|
||||
|
||||
|
||||
static int
|
||||
tulip_dc21040_media_probe(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
int cnt;
|
||||
|
||||
*sc->tulip_csrs.csr_sia_connectivity = 0;
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
for (cnt = 0; cnt < 2400; cnt++) {
|
||||
if ((*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) == 0)
|
||||
break;
|
||||
DELAY(1000);
|
||||
}
|
||||
return (*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) != 0;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_dc21040_media_select(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
sc->tulip_cmdmode |= TULIP_CMD_CAPTREFFCT;
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_RESET;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling Thinwire/AUI port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_AUI;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT/UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
}
|
||||
|
||||
static const tulip_boardsw_t tulip_dc21040_boardsw = {
|
||||
TULIP_DC21040_GENERIC,
|
||||
"",
|
||||
tulip_dc21040_media_probe,
|
||||
tulip_dc21040_media_select
|
||||
};
|
||||
|
||||
static int
|
||||
tulip_dc21140_evalboard_media_probe(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_INIT;
|
||||
*sc->tulip_csrs.csr_command |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_command &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
DELAY(1000000);
|
||||
return (*sc->tulip_csrs.csr_gp & TULIP_GP_EB_OK100) != 0;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_dc21140_evalboard_media_select(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
sc->tulip_cmdmode |= TULIP_CMD_STOREFWD|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_INIT;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling 100baseTX UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode &= ~(TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
}
|
||||
|
||||
static const tulip_boardsw_t tulip_dc21140_eb_boardsw = {
|
||||
TULIP_DC21140_DEC_EB,
|
||||
"",
|
||||
tulip_dc21140_evalboard_media_probe,
|
||||
tulip_dc21140_evalboard_media_select
|
||||
};
|
||||
|
||||
static int
|
||||
tulip_dc21140_de500_media_probe(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX;
|
||||
if ((*sc->tulip_csrs.csr_gp & (TULIP_GP_DE500_NOTOK_100|TULIP_GP_DE500_NOTOK_10)) != (TULIP_GP_DE500_NOTOK_100|TULIP_GP_DE500_NOTOK_10))
|
||||
return (*sc->tulip_csrs.csr_gp & TULIP_GP_DE500_NOTOK_100) == 0;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX|TULIP_GP_DE500_FORCE_100;
|
||||
*sc->tulip_csrs.csr_command |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_command &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
DELAY(1000000);
|
||||
return (*sc->tulip_csrs.csr_gp & TULIP_GP_DE500_NOTOK_100) == 0;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_dc21140_de500_media_select(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
sc->tulip_cmdmode |= TULIP_CMD_STOREFWD|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_PINS;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling 100baseTX UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX
|
||||
|TULIP_GP_DE500_FORCE_100;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode &= ~(TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX;
|
||||
}
|
||||
}
|
||||
|
||||
static const tulip_boardsw_t tulip_dc21140_de500_boardsw = {
|
||||
TULIP_DC21140_DEC_DE500, "Digital DE500 ",
|
||||
tulip_dc21140_de500_media_probe,
|
||||
tulip_dc21140_de500_media_select
|
||||
};
|
||||
|
||||
static void
|
||||
tulip_reset(
|
||||
TULIP_IFRESET_ARGS)
|
||||
@ -244,45 +402,8 @@ tulip_reset(
|
||||
33MHz that comes to two microseconds but wait a
|
||||
bit longer anyways) */
|
||||
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040) {
|
||||
/*
|
||||
* Use the
|
||||
*/
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_RESET;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling Thinwire/AUI port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_AUI;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT/UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
} else if (tulip_chipids[sc->tulip_unit] == TULIP_DC21140) {
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_INIT;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling 100baseTX UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode &= ~(TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
}
|
||||
(*sc->tulip_boardsw->bd_media_select)(sc);
|
||||
|
||||
*sc->tulip_csrs.csr_txlist = vtophys(&sc->tulip_txinfo.ri_first[0]);
|
||||
*sc->tulip_csrs.csr_rxlist = vtophys(&sc->tulip_rxinfo.ri_first[0]);
|
||||
*sc->tulip_csrs.csr_intr = 0;
|
||||
@ -367,7 +488,6 @@ tulip_init(
|
||||
tulip_start(&sc->tulip_if);
|
||||
}
|
||||
sc->tulip_cmdmode |= TULIP_CMD_THRSHLD160;
|
||||
sc->tulip_cmdmode |= TULIP_CMD_CAPTREFFCT;
|
||||
*sc->tulip_csrs.csr_intr = sc->tulip_intrmask;
|
||||
*sc->tulip_csrs.csr_command = sc->tulip_cmdmode;
|
||||
} else {
|
||||
@ -848,6 +968,25 @@ tulip_read_srom(
|
||||
csr = 0; EMIT;
|
||||
}
|
||||
}
|
||||
|
||||
#define tulip_mchash(mca) (tulip_crc32(mca, 6) & 0x1FF)
|
||||
#define tulip_srom_crcok(databuf) ( \
|
||||
(tulip_crc32(databuf, 126) & 0xFFFF) == \
|
||||
((databuf)[126] | ((databuf)[127] << 8)))
|
||||
|
||||
static unsigned
|
||||
tulip_crc32(
|
||||
const unsigned char *databuf,
|
||||
size_t datalen)
|
||||
{
|
||||
u_int idx, bit, data, crc = 0xFFFFFFFFUL;
|
||||
|
||||
for (idx = 0; idx < datalen; idx++)
|
||||
for (data = *databuf++, bit = 0; bit < 8; bit++, data >>= 1)
|
||||
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0);
|
||||
return crc;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* This is the standard method of reading the DEC Address ROMS.
|
||||
@ -861,9 +1000,9 @@ tulip_read_macaddr(
|
||||
unsigned char tmpbuf[8];
|
||||
static u_char testpat[] = { 0xFF, 0, 0x55, 0xAA, 0xFF, 0, 0x55, 0xAA };
|
||||
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040
|
||||
|| (tulip_chipids[sc->tulip_unit] == TULIP_DC21140 && sc->tulip_revinfo < 0x10)) {
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040) {
|
||||
*sc->tulip_csrs.csr_enetrom = 1;
|
||||
sc->tulip_boardsw = &tulip_dc21040_boardsw;
|
||||
for (idx = 0; idx < 32; idx++) {
|
||||
int cnt = 0;
|
||||
while ((csr = *sc->tulip_csrs.csr_enetrom) < 0 && cnt < 10000)
|
||||
@ -871,9 +1010,29 @@ tulip_read_macaddr(
|
||||
sc->tulip_rombuf[idx] = csr & 0xFF;
|
||||
}
|
||||
} else {
|
||||
/*
|
||||
* Assume all DC21140 board are compatible with the
|
||||
* DEC 10/100 evaluation board. Not really valid but ...
|
||||
*/
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21140)
|
||||
sc->tulip_boardsw = &tulip_dc21140_eb_boardsw;
|
||||
tulip_read_srom(sc);
|
||||
if (tulip_srom_crcok(sc->tulip_rombuf)) {
|
||||
/*
|
||||
* New SROM format. Copy out the Ethernet address.
|
||||
* If it contains a DE500-XA string, then it must be
|
||||
* a DE500-XA.
|
||||
*/
|
||||
bcopy(sc->tulip_rombuf + 20, sc->tulip_hwaddr, 6);
|
||||
if (bcmp(sc->tulip_rombuf + 29, "DE500-XA", 8) == 0)
|
||||
sc->tulip_boardsw = &tulip_dc21140_de500_boardsw;
|
||||
if (sc->tulip_boardsw == NULL)
|
||||
return -6;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
if (bcmp(&sc->tulip_rombuf[0], &sc->tulip_rombuf[16], 8) != 0) {
|
||||
/*
|
||||
* Some folks don't use the standard ethernet rom format
|
||||
@ -926,24 +1085,6 @@ tulip_read_macaddr(
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned
|
||||
tulip_mchash(
|
||||
unsigned char *mca)
|
||||
{
|
||||
u_int idx, bit, data, crc = 0xFFFFFFFFUL;
|
||||
|
||||
#ifdef __alpha
|
||||
for (data = *(__unaligned u_long *) mca, bit = 0; bit < 48; bit++, data >>=
|
||||
1)
|
||||
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0);
|
||||
#else
|
||||
for (idx = 0; idx < 6; idx++)
|
||||
for (data = *mca++, bit = 0; bit < 8; bit++, data >>= 1)
|
||||
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0);
|
||||
#endif
|
||||
return crc & 0x1FF;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_addr_filter(
|
||||
tulip_softc_t *sc)
|
||||
@ -1127,49 +1268,25 @@ tulip_attach(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
struct ifnet *ifp = &sc->tulip_if;
|
||||
int cnt;
|
||||
|
||||
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
|
||||
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040) {
|
||||
*sc->tulip_csrs.csr_sia_connectivity = 0;
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
for (cnt = 0; cnt < 240000; cnt++) {
|
||||
if ((*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) == 0)
|
||||
break;
|
||||
DELAY(10);
|
||||
}
|
||||
if (*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) {
|
||||
ifp->if_flags |= IFF_ALTPHYS;
|
||||
} else {
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
}
|
||||
} else if (tulip_chipids[sc->tulip_unit] == TULIP_DC21140) {
|
||||
/*
|
||||
* This is going to suck.
|
||||
*/
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_INIT;
|
||||
*sc->tulip_csrs.csr_command |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
*sc->tulip_csrs.csr_command &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
DELAY(1000000);
|
||||
if (*sc->tulip_csrs.csr_gp & TULIP_GP_FASTMODE) {
|
||||
ifp->if_flags |= IFF_ALTPHYS;
|
||||
} else {
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
}
|
||||
if ((*sc->tulip_boardsw->bd_media_probe)(sc)) {
|
||||
ifp->if_flags |= IFF_ALTPHYS;
|
||||
} else {
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
}
|
||||
|
||||
TULIP_RESET(sc);
|
||||
|
||||
ifp->if_flags = IFF_BROADCAST|IFF_SIMPLEX|IFF_NOTRAILERS|IFF_MULTICAST;
|
||||
ifp->if_init = tulip_init;
|
||||
ifp->if_ioctl = tulip_ioctl;
|
||||
ifp->if_output = ether_output;
|
||||
ifp->if_reset = tulip_reset;
|
||||
ifp->if_start = tulip_start;
|
||||
|
||||
printf("%s%d: %s pass %d.%d ethernet address %s\n",
|
||||
printf("%s%d: %s%s pass %d.%d Ethernet address %s\n",
|
||||
sc->tulip_name, sc->tulip_unit,
|
||||
sc->tulip_boardsw->bd_description,
|
||||
tulip_chipdescs[tulip_chipids[sc->tulip_unit]],
|
||||
(sc->tulip_revinfo & 0xF0) >> 4,
|
||||
sc->tulip_revinfo & 0x0F,
|
||||
@ -1291,7 +1408,7 @@ tulip_pci_attach(
|
||||
int unit)
|
||||
{
|
||||
tulip_softc_t *sc;
|
||||
int retval, idx;
|
||||
int retval, idx, revinfo;
|
||||
vm_offset_t va_csrs, pa_csrs;
|
||||
tulip_desc_t *rxdescs, *txdescs;
|
||||
|
||||
@ -1301,6 +1418,18 @@ tulip_pci_attach(
|
||||
return;
|
||||
}
|
||||
|
||||
revinfo = pci_conf_read(config_id, PCI_CFRV) & 0xFF;
|
||||
if (tulip_chipids[unit] == TULIP_DC21040 && revinfo < 0x23) {
|
||||
printf("de%d: not configured; DC21040 pass 2.3 required (%d.%d found)\n",
|
||||
unit, revinfo >> 4, revinfo & 0x0f);
|
||||
return;
|
||||
} else if (tulip_chipids[unit] == TULIP_DC21140 && revinfo < 0x11) {
|
||||
printf("de%d: not configured; DC21140 pass 1.1 required (%d.%d found)\n",
|
||||
unit, revinfo >> 4, revinfo & 0x0f);
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
sc = (tulip_softc_t *) malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT);
|
||||
if (sc == NULL)
|
||||
return;
|
||||
@ -1341,8 +1470,9 @@ tulip_pci_attach(
|
||||
for (idx = 0; idx < 32; idx++)
|
||||
printf("%02x", sc->tulip_rombuf[idx]);
|
||||
printf("\n");
|
||||
printf("%s%d: %s pass %d.%d ethernet address %s\n",
|
||||
printf("%s%d: %s%s pass %d.%d Ethernet address %s\n",
|
||||
sc->tulip_name, sc->tulip_unit,
|
||||
(sc->tulip_boardsw != NULL ? sc->tulip_boardsw->bd_description : ""),
|
||||
tulip_chipdescs[tulip_chipids[sc->tulip_unit]],
|
||||
(sc->tulip_revinfo & 0xF0) >> 4, sc->tulip_revinfo & 0x0F,
|
||||
"unknown");
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*-
|
||||
* Copyright (c) 1994 Matt Thomas (thomas@lkg.dec.com)
|
||||
* Copyright (c) 1994, 1995 Matt Thomas (thomas@lkg.dec.com)
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -21,9 +21,13 @@
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $Id: dc21040.h,v 1.1 1994/10/01 20:16:45 wollman Exp $
|
||||
* $Id: dc21040.h,v 1.2 1995/04/09 04:46:14 davidg Exp $
|
||||
*
|
||||
* $Log: dc21040.h,v $
|
||||
* Revision 1.2 1995/04/09 04:46:14 davidg
|
||||
* From Matt Thomas: Added support for 100Mb cards (such as the DEC DE-500-XA
|
||||
* and SMC 9332).
|
||||
*
|
||||
* Revision 1.1 1994/10/01 20:16:45 wollman
|
||||
* Add Matt Thomas's DC21040 PCI Ethernet driver. (This is turning out
|
||||
* to be quite a popular chip, so expect to see a number of products
|
||||
@ -187,10 +191,12 @@ typedef struct {
|
||||
/*
|
||||
* CSR6 -- Command (Operation Mode) Register
|
||||
*/
|
||||
#define TULIP_CMD_SCRAMBLER 0x00400000L /* (RW) Scrambler Mode (DC21140) */
|
||||
#define TULIP_CMD_PCSFUNCTION 0x00200000L /* (RW) PCS Function (DC21140) */
|
||||
#define TULIP_CMD_TXTHRSHLDCTL 0x00100000L /* (RW) Transmit Threshold Mode (DC21140) */
|
||||
#define TULIP_CMD_STOREFWD 0x00080000L /* (RW) Store and Foward (DC21140) */
|
||||
#define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (DC21140) */
|
||||
#define TULIP_CMD_SCRAMBLER 0x01000000L /* (RW) Scrambler Mode (DC21140) */
|
||||
#define TULIP_CMD_PCSFUNCTION 0x00800000L /* (RW) PCS Function (DC21140) */
|
||||
#define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (DC21140) */
|
||||
#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (DC21140) */
|
||||
#define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (DC21140) */
|
||||
#define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (DC21140) */
|
||||
#define TULIP_CMD_CAPTREFFCT 0x00020000L /* (RW) Capture Effect (!802.3) */
|
||||
#define TULIP_CMD_BACKPRESSURE 0x00010000L /* (RW) Back Pressure (!802.3) (DC21040) */
|
||||
@ -241,10 +247,24 @@ typedef struct {
|
||||
#define TULIP_BUSMODE_TXPOLL_1600us 0x00060000L
|
||||
|
||||
|
||||
#define TULIP_GP_FASTMODE 0x00000040 /* 100 Mb/sec Signal Detect gep<6> */
|
||||
#define TULIP_GP_PINS 0x0000013F /* General Purpose Pin directions */
|
||||
#define TULIP_GP_INIT 0x0000000B /* No loopback --- point-to-point */
|
||||
/*
|
||||
* These are the defintitions used for the DEC DC21140
|
||||
* evaluation board.
|
||||
*/
|
||||
#define TULIP_GP_EB_PINS 0x0000011F /* General Purpose Pin directions */
|
||||
#define TULIP_GP_EB_OK10 0x00000080 /* 10 Mb/sec Signal Detect gep<7> */
|
||||
#define TULIP_GP_EB_OK100 0x00000040 /* 100 Mb/sec Signal Detect gep<6> */
|
||||
#define TULIP_GP_EB_INIT 0x0000000B /* No loopback --- point-to-point */
|
||||
|
||||
/*
|
||||
* There are the definitions used for the DEC DE500-XA
|
||||
* 10/100 board
|
||||
*/
|
||||
#define TULIP_GP_DE500_PINS 0x0000010FL
|
||||
#define TULIP_GP_DE500_NOTOK_10 0x00000080L
|
||||
#define TULIP_GP_DE500_NOTOK_100 0x00000040L
|
||||
#define TULIP_GP_DE500_HALFDUPLEX 0x00000008L
|
||||
#define TULIP_GP_DE500_FORCE_100 0x00000001L
|
||||
/*
|
||||
* SROM definitions for the DC21140 and DC21041.
|
||||
*/
|
||||
|
||||
326
sys/pci/if_de.c
326
sys/pci/if_de.c
@ -21,7 +21,7 @@
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $Id: if_de.c,v 1.19 1995/03/21 22:41:18 se Exp $
|
||||
* $Id: if_de.c,v 1.20 1995/04/09 04:46:15 davidg Exp $
|
||||
*
|
||||
*/
|
||||
|
||||
@ -165,7 +165,23 @@ typedef struct {
|
||||
#define TULIP_TXDESCS 128
|
||||
#define TULIP_RXQ_TARGET 8
|
||||
|
||||
typedef enum {
|
||||
TULIP_DC21040_GENERIC,
|
||||
TULIP_DC21140_DEC_EB,
|
||||
TULIP_DC21140_DEC_DE500
|
||||
} tulip_board_t;
|
||||
|
||||
typedef struct _tulip_softc_t tulip_softc_t;
|
||||
|
||||
typedef struct {
|
||||
tulip_board_t bd_type;
|
||||
const char *bd_description;
|
||||
int (*bd_media_probe)(tulip_softc_t *sc);
|
||||
void (*bd_media_select)(tulip_softc_t *sc);
|
||||
} tulip_boardsw_t;
|
||||
|
||||
|
||||
struct _tulip_softc_t {
|
||||
struct arpcom tulip_ac;
|
||||
tulip_regfile_t tulip_csrs;
|
||||
unsigned tulip_flags;
|
||||
@ -179,6 +195,7 @@ typedef struct {
|
||||
tulip_uint32_t tulip_intrmask;
|
||||
tulip_uint32_t tulip_cmdmode;
|
||||
tulip_uint32_t tulip_revinfo;
|
||||
const tulip_boardsw_t *tulip_boardsw;
|
||||
#if NBPFILTER > 0
|
||||
caddr_t tulip_bpf; /* BPF context */
|
||||
#endif
|
||||
@ -186,15 +203,15 @@ typedef struct {
|
||||
struct ifqueue tulip_rxq;
|
||||
tulip_ringinfo_t tulip_rxinfo;
|
||||
tulip_ringinfo_t tulip_txinfo;
|
||||
} tulip_softc_t;
|
||||
};
|
||||
|
||||
#ifndef IFF_ALTPHYS
|
||||
#define IFF_ALTPHYS IFF_LINK0 /* In case it isn't defined */
|
||||
#define IFF_ALTPHYS IFF_LINK2 /* In case it isn't defined */
|
||||
#endif
|
||||
typedef enum { TULIP_DC21040, TULIP_DC21140, TULIP_DC21041 } tulip_chipid_t;
|
||||
const char *tulip_chipdescs[] = {
|
||||
"DC21040 [10Mb/s]",
|
||||
"DC21140 [10/100Mb/s]",
|
||||
"DC21140 [10-100Mb/s]",
|
||||
"DC21041 [10Mb/s]"
|
||||
};
|
||||
|
||||
@ -231,6 +248,147 @@ static void tulip_addr_filter(tulip_softc_t *sc);
|
||||
#define TULIP_RESET(sc) tulip_reset((sc)->tulip_unit, 0)
|
||||
#endif
|
||||
|
||||
|
||||
static int
|
||||
tulip_dc21040_media_probe(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
int cnt;
|
||||
|
||||
*sc->tulip_csrs.csr_sia_connectivity = 0;
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
for (cnt = 0; cnt < 2400; cnt++) {
|
||||
if ((*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) == 0)
|
||||
break;
|
||||
DELAY(1000);
|
||||
}
|
||||
return (*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) != 0;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_dc21040_media_select(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
sc->tulip_cmdmode |= TULIP_CMD_CAPTREFFCT;
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_RESET;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling Thinwire/AUI port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_AUI;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT/UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
}
|
||||
|
||||
static const tulip_boardsw_t tulip_dc21040_boardsw = {
|
||||
TULIP_DC21040_GENERIC,
|
||||
"",
|
||||
tulip_dc21040_media_probe,
|
||||
tulip_dc21040_media_select
|
||||
};
|
||||
|
||||
static int
|
||||
tulip_dc21140_evalboard_media_probe(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_INIT;
|
||||
*sc->tulip_csrs.csr_command |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_command &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
DELAY(1000000);
|
||||
return (*sc->tulip_csrs.csr_gp & TULIP_GP_EB_OK100) != 0;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_dc21140_evalboard_media_select(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
sc->tulip_cmdmode |= TULIP_CMD_STOREFWD|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_EB_INIT;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling 100baseTX UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode &= ~(TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
}
|
||||
|
||||
static const tulip_boardsw_t tulip_dc21140_eb_boardsw = {
|
||||
TULIP_DC21140_DEC_EB,
|
||||
"",
|
||||
tulip_dc21140_evalboard_media_probe,
|
||||
tulip_dc21140_evalboard_media_select
|
||||
};
|
||||
|
||||
static int
|
||||
tulip_dc21140_de500_media_probe(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX;
|
||||
if ((*sc->tulip_csrs.csr_gp & (TULIP_GP_DE500_NOTOK_100|TULIP_GP_DE500_NOTOK_10)) != (TULIP_GP_DE500_NOTOK_100|TULIP_GP_DE500_NOTOK_10))
|
||||
return (*sc->tulip_csrs.csr_gp & TULIP_GP_DE500_NOTOK_100) == 0;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX|TULIP_GP_DE500_FORCE_100;
|
||||
*sc->tulip_csrs.csr_command |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_command &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
DELAY(1000000);
|
||||
return (*sc->tulip_csrs.csr_gp & TULIP_GP_DE500_NOTOK_100) == 0;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_dc21140_de500_media_select(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
sc->tulip_cmdmode |= TULIP_CMD_STOREFWD|TULIP_CMD_MUSTBEONE;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_PINS;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling 100baseTX UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX
|
||||
|TULIP_GP_DE500_FORCE_100;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode &= ~(TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_DE500_HALFDUPLEX;
|
||||
}
|
||||
}
|
||||
|
||||
static const tulip_boardsw_t tulip_dc21140_de500_boardsw = {
|
||||
TULIP_DC21140_DEC_DE500, "Digital DE500 ",
|
||||
tulip_dc21140_de500_media_probe,
|
||||
tulip_dc21140_de500_media_select
|
||||
};
|
||||
|
||||
static void
|
||||
tulip_reset(
|
||||
TULIP_IFRESET_ARGS)
|
||||
@ -244,45 +402,8 @@ tulip_reset(
|
||||
33MHz that comes to two microseconds but wait a
|
||||
bit longer anyways) */
|
||||
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040) {
|
||||
/*
|
||||
* Use the
|
||||
*/
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_RESET;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling Thinwire/AUI port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_AUI;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT/UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
} else if (tulip_chipids[sc->tulip_unit] == TULIP_DC21140) {
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_INIT;
|
||||
if (sc->tulip_if.if_flags & IFF_ALTPHYS) {
|
||||
if ((sc->tulip_flags & TULIP_ALTPHYS) == 0)
|
||||
printf("%s%d: enabling 100baseTX UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
} else {
|
||||
if (sc->tulip_flags & TULIP_ALTPHYS)
|
||||
printf("%s%d: enabling 10baseT UTP port\n",
|
||||
sc->tulip_if.if_name, sc->tulip_if.if_unit);
|
||||
sc->tulip_cmdmode &= ~(TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER);
|
||||
sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
|
||||
sc->tulip_flags &= ~TULIP_ALTPHYS;
|
||||
}
|
||||
}
|
||||
(*sc->tulip_boardsw->bd_media_select)(sc);
|
||||
|
||||
*sc->tulip_csrs.csr_txlist = vtophys(&sc->tulip_txinfo.ri_first[0]);
|
||||
*sc->tulip_csrs.csr_rxlist = vtophys(&sc->tulip_rxinfo.ri_first[0]);
|
||||
*sc->tulip_csrs.csr_intr = 0;
|
||||
@ -367,7 +488,6 @@ tulip_init(
|
||||
tulip_start(&sc->tulip_if);
|
||||
}
|
||||
sc->tulip_cmdmode |= TULIP_CMD_THRSHLD160;
|
||||
sc->tulip_cmdmode |= TULIP_CMD_CAPTREFFCT;
|
||||
*sc->tulip_csrs.csr_intr = sc->tulip_intrmask;
|
||||
*sc->tulip_csrs.csr_command = sc->tulip_cmdmode;
|
||||
} else {
|
||||
@ -848,6 +968,25 @@ tulip_read_srom(
|
||||
csr = 0; EMIT;
|
||||
}
|
||||
}
|
||||
|
||||
#define tulip_mchash(mca) (tulip_crc32(mca, 6) & 0x1FF)
|
||||
#define tulip_srom_crcok(databuf) ( \
|
||||
(tulip_crc32(databuf, 126) & 0xFFFF) == \
|
||||
((databuf)[126] | ((databuf)[127] << 8)))
|
||||
|
||||
static unsigned
|
||||
tulip_crc32(
|
||||
const unsigned char *databuf,
|
||||
size_t datalen)
|
||||
{
|
||||
u_int idx, bit, data, crc = 0xFFFFFFFFUL;
|
||||
|
||||
for (idx = 0; idx < datalen; idx++)
|
||||
for (data = *databuf++, bit = 0; bit < 8; bit++, data >>= 1)
|
||||
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0);
|
||||
return crc;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* This is the standard method of reading the DEC Address ROMS.
|
||||
@ -861,9 +1000,9 @@ tulip_read_macaddr(
|
||||
unsigned char tmpbuf[8];
|
||||
static u_char testpat[] = { 0xFF, 0, 0x55, 0xAA, 0xFF, 0, 0x55, 0xAA };
|
||||
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040
|
||||
|| (tulip_chipids[sc->tulip_unit] == TULIP_DC21140 && sc->tulip_revinfo < 0x10)) {
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040) {
|
||||
*sc->tulip_csrs.csr_enetrom = 1;
|
||||
sc->tulip_boardsw = &tulip_dc21040_boardsw;
|
||||
for (idx = 0; idx < 32; idx++) {
|
||||
int cnt = 0;
|
||||
while ((csr = *sc->tulip_csrs.csr_enetrom) < 0 && cnt < 10000)
|
||||
@ -871,9 +1010,29 @@ tulip_read_macaddr(
|
||||
sc->tulip_rombuf[idx] = csr & 0xFF;
|
||||
}
|
||||
} else {
|
||||
/*
|
||||
* Assume all DC21140 board are compatible with the
|
||||
* DEC 10/100 evaluation board. Not really valid but ...
|
||||
*/
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21140)
|
||||
sc->tulip_boardsw = &tulip_dc21140_eb_boardsw;
|
||||
tulip_read_srom(sc);
|
||||
if (tulip_srom_crcok(sc->tulip_rombuf)) {
|
||||
/*
|
||||
* New SROM format. Copy out the Ethernet address.
|
||||
* If it contains a DE500-XA string, then it must be
|
||||
* a DE500-XA.
|
||||
*/
|
||||
bcopy(sc->tulip_rombuf + 20, sc->tulip_hwaddr, 6);
|
||||
if (bcmp(sc->tulip_rombuf + 29, "DE500-XA", 8) == 0)
|
||||
sc->tulip_boardsw = &tulip_dc21140_de500_boardsw;
|
||||
if (sc->tulip_boardsw == NULL)
|
||||
return -6;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
if (bcmp(&sc->tulip_rombuf[0], &sc->tulip_rombuf[16], 8) != 0) {
|
||||
/*
|
||||
* Some folks don't use the standard ethernet rom format
|
||||
@ -926,24 +1085,6 @@ tulip_read_macaddr(
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned
|
||||
tulip_mchash(
|
||||
unsigned char *mca)
|
||||
{
|
||||
u_int idx, bit, data, crc = 0xFFFFFFFFUL;
|
||||
|
||||
#ifdef __alpha
|
||||
for (data = *(__unaligned u_long *) mca, bit = 0; bit < 48; bit++, data >>=
|
||||
1)
|
||||
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0);
|
||||
#else
|
||||
for (idx = 0; idx < 6; idx++)
|
||||
for (data = *mca++, bit = 0; bit < 8; bit++, data >>= 1)
|
||||
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? TULIP_CRC32_POLY : 0);
|
||||
#endif
|
||||
return crc & 0x1FF;
|
||||
}
|
||||
|
||||
static void
|
||||
tulip_addr_filter(
|
||||
tulip_softc_t *sc)
|
||||
@ -1127,49 +1268,25 @@ tulip_attach(
|
||||
tulip_softc_t *sc)
|
||||
{
|
||||
struct ifnet *ifp = &sc->tulip_if;
|
||||
int cnt;
|
||||
|
||||
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
|
||||
|
||||
if (tulip_chipids[sc->tulip_unit] == TULIP_DC21040) {
|
||||
*sc->tulip_csrs.csr_sia_connectivity = 0;
|
||||
*sc->tulip_csrs.csr_sia_connectivity = TULIP_SIACONN_10BASET;
|
||||
for (cnt = 0; cnt < 240000; cnt++) {
|
||||
if ((*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) == 0)
|
||||
break;
|
||||
DELAY(10);
|
||||
}
|
||||
if (*sc->tulip_csrs.csr_sia_status & TULIP_SIASTS_LINKFAIL) {
|
||||
ifp->if_flags |= IFF_ALTPHYS;
|
||||
} else {
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
}
|
||||
} else if (tulip_chipids[sc->tulip_unit] == TULIP_DC21140) {
|
||||
/*
|
||||
* This is going to suck.
|
||||
*/
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_PINS;
|
||||
*sc->tulip_csrs.csr_gp = TULIP_GP_INIT;
|
||||
*sc->tulip_csrs.csr_command |= TULIP_CMD_PORTSELECT
|
||||
|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER;
|
||||
*sc->tulip_csrs.csr_command &= ~TULIP_CMD_TXTHRSHLDCTL;
|
||||
DELAY(1000000);
|
||||
if (*sc->tulip_csrs.csr_gp & TULIP_GP_FASTMODE) {
|
||||
ifp->if_flags |= IFF_ALTPHYS;
|
||||
} else {
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
}
|
||||
if ((*sc->tulip_boardsw->bd_media_probe)(sc)) {
|
||||
ifp->if_flags |= IFF_ALTPHYS;
|
||||
} else {
|
||||
sc->tulip_flags |= TULIP_ALTPHYS;
|
||||
}
|
||||
|
||||
TULIP_RESET(sc);
|
||||
|
||||
ifp->if_flags = IFF_BROADCAST|IFF_SIMPLEX|IFF_NOTRAILERS|IFF_MULTICAST;
|
||||
ifp->if_init = tulip_init;
|
||||
ifp->if_ioctl = tulip_ioctl;
|
||||
ifp->if_output = ether_output;
|
||||
ifp->if_reset = tulip_reset;
|
||||
ifp->if_start = tulip_start;
|
||||
|
||||
printf("%s%d: %s pass %d.%d ethernet address %s\n",
|
||||
printf("%s%d: %s%s pass %d.%d Ethernet address %s\n",
|
||||
sc->tulip_name, sc->tulip_unit,
|
||||
sc->tulip_boardsw->bd_description,
|
||||
tulip_chipdescs[tulip_chipids[sc->tulip_unit]],
|
||||
(sc->tulip_revinfo & 0xF0) >> 4,
|
||||
sc->tulip_revinfo & 0x0F,
|
||||
@ -1291,7 +1408,7 @@ tulip_pci_attach(
|
||||
int unit)
|
||||
{
|
||||
tulip_softc_t *sc;
|
||||
int retval, idx;
|
||||
int retval, idx, revinfo;
|
||||
vm_offset_t va_csrs, pa_csrs;
|
||||
tulip_desc_t *rxdescs, *txdescs;
|
||||
|
||||
@ -1301,6 +1418,18 @@ tulip_pci_attach(
|
||||
return;
|
||||
}
|
||||
|
||||
revinfo = pci_conf_read(config_id, PCI_CFRV) & 0xFF;
|
||||
if (tulip_chipids[unit] == TULIP_DC21040 && revinfo < 0x23) {
|
||||
printf("de%d: not configured; DC21040 pass 2.3 required (%d.%d found)\n",
|
||||
unit, revinfo >> 4, revinfo & 0x0f);
|
||||
return;
|
||||
} else if (tulip_chipids[unit] == TULIP_DC21140 && revinfo < 0x11) {
|
||||
printf("de%d: not configured; DC21140 pass 1.1 required (%d.%d found)\n",
|
||||
unit, revinfo >> 4, revinfo & 0x0f);
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
sc = (tulip_softc_t *) malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT);
|
||||
if (sc == NULL)
|
||||
return;
|
||||
@ -1341,8 +1470,9 @@ tulip_pci_attach(
|
||||
for (idx = 0; idx < 32; idx++)
|
||||
printf("%02x", sc->tulip_rombuf[idx]);
|
||||
printf("\n");
|
||||
printf("%s%d: %s pass %d.%d ethernet address %s\n",
|
||||
printf("%s%d: %s%s pass %d.%d Ethernet address %s\n",
|
||||
sc->tulip_name, sc->tulip_unit,
|
||||
(sc->tulip_boardsw != NULL ? sc->tulip_boardsw->bd_description : ""),
|
||||
tulip_chipdescs[tulip_chipids[sc->tulip_unit]],
|
||||
(sc->tulip_revinfo & 0xF0) >> 4, sc->tulip_revinfo & 0x0F,
|
||||
"unknown");
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user