d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Renumber the section starting at the duplicate 5. section. Changed

Browse Source 
reference to RELNOTES.FreeBSD to not have an absolute path on it since
these appear in several places!
This commit is contained in:
Rodney W. Grimes 1993-09-13 07:53:28 +00:00
parent e525749e8a
commit a287a3fc73
1 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
etc/etc.i386/floppy.install_notes
View File

@ -75,38 +75,38 @@ to make initial installation of the system as easy as possible.
installed, then insert this disk in a floppy drive. Again, specify
the drive to read from.
5. After the dos-floppy has been copied to the disk, enter `halt' at
6. After the dos-floppy has been copied to the disk, enter `halt' at
the command prompt.
6. When the system asks you to press the return key to reboot, first
7. When the system asks you to press the return key to reboot, first
remove the floppy and then press the return key to boot from the hard
disk.
7. At this point you will get 4 errors from the fsck on boot, these
8. At this point you will get 4 errors from the fsck on boot, these
are normal and are caused by files that were open when the
/dev entries were built - just ignore them. The system will
correct these errors and then halt, after which you should press
the return key again to reboot with a clean system.
8. Congratulations, you've got the mini FreeBSD system on your disk!
9. Congratulations, you've got the mini FreeBSD system on your disk!
9. Follow the instructions about set_tmp_dir and extract that
10. Follow the instructions about set_tmp_dir and extract that
will come on your screen after you've pressed the return key.
10. You will get the following errors while extracting the bin
11. You will get the following errors while extracting the bin
distribution, you can safely ignore them.
/tmp/tar: Could not create file bin/sh : Text file busy
/tmp/tar: Could not create file sbin/init : Text file busy
/tmp/tar: Could not link .profile to root/.profile : File exists
11. Run the configure command to set up some of the /etc files by
12. Run the configure command to set up some of the /etc files by
typing ``configure''. You will have to edit /etc/netstart after
this if you have a networking interface.
12. Reboot so that the system comes up multiuser by typing ``reboot''.
13. Reboot so that the system comes up multiuser by typing ``reboot''.
13. You are now running FreeBSD! Congradulations! You may now continue
14. You are now running FreeBSD! Congradulations! You may now continue
with installing the source distribution, or stop here for now.
Should you decided to postpone further installation, you should
@ -118,7 +118,7 @@ to make initial installation of the system as easy as possible.
mv /.profile /.profile.install
ln /root/.profile /.profile
14. If your disk has several operating systems, you may want to
15. If your disk has several operating systems, you may want to
install the Thomas Wolfram's os-bs boot manager for selecting
which system to boot. This works well with DOS, OS/2, FreeBSD
and other systems. To install it, boot the system with MS-DOS
@ -141,9 +141,9 @@ to make initial installation of the system as easy as possible.
partition for the boot system active. FreeBSD has an fdisk
command that can be used for this purpose as well.
15. In addition to the FreeBSD source and binary distributions, many
16. In addition to the FreeBSD source and binary distributions, many
additional packages, such as X11 and TeX, may be obtained from
freebsd.cdrom.com - please have a look around! You may also find
this a good time to read the release notes in /usr/src/RELNOTES.FreeBSD.
this a good time to read the release notes in RELNOTES.FreeBSD.
End of $Id: floppy.install_notes,v 1.7 1993/09/11 08:32:50 alm Exp $
End of $Id: floppy.install_notes,v 1.8 1993/09/13 07:26:39 alm Exp $