mdoc(7) police: Added missing markup bits.

share/man/man4/wi.4

@@ -296,9 +296,9 @@ command.
 .Xr arp 4 ,
 .Xr card 4 ,
 .Xr cbb 4 ,
+.Xr netintro 4 ,
 .Xr pccard 4 ,
 .Xr pcic 4 ,
-.Xr netintro 4 ,
 .Xr ifconfig 8 ,
 .Xr wicontrol 8
 .Rs
@@ -333,7 +333,7 @@ The driver currently precludes hostap functionality older station
 firmware.
 The best version of the station firmware for the Prism family of chips
 seems to be 1.4.9.
-Some users of Prism 2 and 2.5 based cards report that station firmware
+Some users of Prism-II and 2.5 based cards report that station firmware
 version 1.3.4 works better for them in hostap than 1.4.9.
 Older versions of the Prism station firmware have a number of issues
 with hostap mode.
@@ -346,20 +346,29 @@ Lucent cards prior to firmware version 6.0.4 do not support IBSS
 mode.
 These cards support only the pre 802.11 mode known as
 .Dq "demo ad-hoc mode"
-which doesn't interoperate with stations in IBSS mode.
-.Pp
+which does not interoperate with stations in IBSS mode.
 .Sh BUGS
 Not all the new messages are documented here, and many of them are
 indications of transient errors that are not indications of serious
 problems.
 .Pp
 WL200 PCI wireless cards are based on a Cirrus Logic CL-PD6729 bridge
-chips glued to an intersil prism2 pcmcia chipset w/o the PC Card
+chips glued to an Intersil Prism-II PCMCIA chipset w/o the PC Card
 form factor being present.
 These chips are special and require special care to use properly.
-One must set hw.pcic.pd6729_intr_path="2" in
+One must set
+.Va hw.pcic.pd6729_intr_path Ns = Ns Qq Li 2
+in
 .Pa /boot/loader.conf .
 This tells the pccard system to use PCI interrupts for this odd beast.
 It is not possible to know automatically which kind of interrupts to use.
-OLDCARD devices (pcic and card) support this device.
-NEWCARD devices (cbb and pccard) do not support it at this time.
+OLDCARD devices
+.Xr ( pcic 4
+and
+.Xr card 4 )
+support this device.
+NEWCARD devices
+.Xr ( pccbb 4
+and
+.Xr pccard 4 )
+do not support it at this time.