- Implement iclear methods for QUICC and SAB 82532. With r253161 in place,

this is is crucial at least for the latter.
  What happens is that attaching uart(4) to scc(4) causes the SAB 82532 to
  "receive" something and trigger a SER_INT_RXREADY interrupt, given that
  at least fast/filter interrupts are already enabled. Prior to r253161,
  uart_bus_ihand() was set up at this point and handled that condition,
  i. e. read the RX FIFO and issued a Receive Message Complete.
  Now, uart_bus_ihand() and uart_intr() are setup after attaching uart(4),
  leaving the SER_INT_RXREADY interrupt triggered during the latter to
  be handled by the iclear method. However, with that method not implement,
  this in turn causes SAB 82532 to not issue any further SER_INT_RXREADY
  interrupts until the RX FIFO is full again. Thus, 15 received bytes go
  to nowhere, given that "the other half" of the RX FIFO is used for status
  information. Hence, implementing sab82532_bfe_iclear() fixes things again.
  Potentially, the same problem exists for QUICC.
- Remove unnecessary __RMAN_RESOURCE_VISIBLE.
- Remove a superfluous header.
- Use KOBJMETHOD_END.
- Mark unused arguments as such.
- Remove variables unused after initialization.

Reviewed by:	marcel (earlier version)

sys/dev/scc/scc_dev_quicc.c

@@ -27,13 +27,10 @@
 #include <sys/cdefs.h>
 __FBSDID("$FreeBSD$");
 
-#define __RMAN_RESOURCE_VISIBLE
-
 #include <sys/param.h>
 #include <sys/systm.h>
 #include <sys/bus.h>
 #include <sys/conf.h>
-#include <sys/endian.h>
 #include <machine/bus.h>
 #include <sys/rman.h>
 #include <sys/serial.h>
@@ -63,7 +60,7 @@ static kobj_method_t quicc_methods[] = {
 	KOBJMETHOD(scc_iclear,	quicc_bfe_iclear),
 	KOBJMETHOD(scc_ipend,	quicc_bfe_ipend),
 	KOBJMETHOD(scc_probe,	quicc_bfe_probe),
-	{ 0, 0 }
+	KOBJMETHOD_END
 };
 
 struct scc_class scc_quicc_class = {
@@ -77,11 +74,9 @@ struct scc_class scc_quicc_class = {
 };
 
 static int
-quicc_bfe_attach(struct scc_softc *sc, int reset)
+quicc_bfe_attach(struct scc_softc *sc __unused, int reset __unused)
 {
-	struct scc_bas *bas;
 
-	bas = &sc->sc_bas;
 	return (0);
 }
 
@@ -104,7 +99,18 @@ quicc_bfe_enabled(struct scc_softc *sc, struct scc_chan *ch)
 static int
 quicc_bfe_iclear(struct scc_softc *sc, struct scc_chan *ch)
 {
+	struct scc_bas *bas;
+	uint16_t rb, st;
 
+	bas = &sc->sc_bas;
+	mtx_lock_spin(&sc->sc_hwmtx);
+	if (ch->ch_ipend & SER_INT_RXREADY) {
+		rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(ch->ch_nr - 1));
+		st = quicc_read2(bas, rb);
+		(void)quicc_read4(bas, rb + 4);
+		quicc_write2(bas, rb, st | 0x9000);
+	}
+	mtx_unlock_spin(&sc->sc_hwmtx);
 	return (0);
 }
 
@@ -142,10 +148,8 @@ quicc_bfe_ipend(struct scc_softc *sc)
 }
 
 static int
-quicc_bfe_probe(struct scc_softc *sc)
+quicc_bfe_probe(struct scc_softc *sc __unused)
 {
-	struct scc_bas *bas;
 
-	bas = &sc->sc_bas;
 	return (0);
 }

sys/dev/scc/scc_dev_sab82532.c

@@ -52,7 +52,7 @@ static kobj_method_t sab82532_methods[] = {
 	KOBJMETHOD(scc_iclear,	sab82532_bfe_iclear),
 	KOBJMETHOD(scc_ipend,	sab82532_bfe_ipend),
 	KOBJMETHOD(scc_probe,	sab82532_bfe_probe),
-	{ 0, 0 }
+	KOBJMETHOD_END
 };
 
 struct scc_class scc_sab82532_class = {
@@ -66,18 +66,37 @@ struct scc_class scc_sab82532_class = {
 };
 
 static int
-sab82532_bfe_attach(struct scc_softc *sc, int reset)
+sab82532_bfe_attach(struct scc_softc *sc __unused, int reset __unused)
 {
-	struct scc_bas *bas;
 
-	bas = &sc->sc_bas;
 	return (0);
 }
 
 static int
 sab82532_bfe_iclear(struct scc_softc *sc, struct scc_chan *ch)
 {
+	struct scc_bas *bas;
+	int i, ofs, rbcl;
 
+	bas = &sc->sc_bas;
+	ofs = (ch->ch_nr - 1) * SAB_CHANLEN;
+	mtx_lock_spin(&sc->sc_hwmtx);
+	if (ch->ch_ipend & SER_INT_RXREADY) {
+		if (scc_getreg(bas, ofs + SAB_STAR) & SAB_STAR_RFNE) {
+			rbcl = scc_getreg(bas, ofs + SAB_RBCL) & 31;
+			if (rbcl == 0)
+				rbcl = 32;
+			for (i = 0; i < rbcl; i += 2) {
+				(void)scc_getreg(bas, ofs + SAB_RFIFO);
+				(void)scc_getreg(bas, ofs + SAB_RFIFO + 1);
+			}
+		}
+		while (scc_getreg(bas, ofs + SAB_STAR) & SAB_STAR_CEC)
+			;
+		scc_setreg(bas, ofs + SAB_CMDR, SAB_CMDR_RMC);
+		scc_barrier(bas);
+	}
+	mtx_unlock_spin(&sc->sc_hwmtx);
 	return (0);
 }
 
@@ -124,10 +143,8 @@ sab82532_bfe_ipend(struct scc_softc *sc)
 }
 
 static int
-sab82532_bfe_probe(struct scc_softc *sc)
+sab82532_bfe_probe(struct scc_softc *sc __unused)
 {
-	struct scc_bas *bas;
 
-	bas = &sc->sc_bas;
 	return (0);
 }

sys/dev/scc/scc_dev_z8530.c

@@ -52,7 +52,7 @@ static kobj_method_t z8530_methods[] = {
 	KOBJMETHOD(scc_iclear,	z8530_bfe_iclear),
 	KOBJMETHOD(scc_ipend,	z8530_bfe_ipend),
 	KOBJMETHOD(scc_probe,	z8530_bfe_probe),
-	{ 0, 0 }
+	KOBJMETHOD_END
 };
 
 struct scc_class scc_z8530_class = {
@@ -85,11 +85,9 @@ scc_getmreg(struct scc_bas *bas, int ch, int reg)
 }
 
 static int
-z8530_bfe_attach(struct scc_softc *sc, int reset)
+z8530_bfe_attach(struct scc_softc *sc __unused, int reset __unused)
 {
-	struct scc_bas *bas;
 
-	bas = &sc->sc_bas;
 	return (0);
 }
 
@@ -189,10 +187,8 @@ z8530_bfe_ipend(struct scc_softc *sc)
 }
 
 static int
-z8530_bfe_probe(struct scc_softc *sc)
+z8530_bfe_probe(struct scc_softc *sc __unused)
 {
-	struct scc_bas *bas;
 
-	bas = &sc->sc_bas;
 	return (0);
 }