From c9da1b81d5a663a6ec36ab25d02a406ebbff817e Mon Sep 17 00:00:00 2001 From: Peter Wemm Date: Fri, 10 May 1996 13:26:03 +0000 Subject: [PATCH] Oops, I missed these when I imported the Stallion drivers. Add samples and some info to LINT (and a pointer to the real docs) --- sys/conf/NOTES | 21 ++++++++++++++++++++- sys/i386/conf/LINT | 21 ++++++++++++++++++++- sys/i386/conf/NOTES | 21 ++++++++++++++++++++- 3 files changed, 60 insertions(+), 3 deletions(-) diff --git a/sys/conf/NOTES b/sys/conf/NOTES index e268f85f14ab..45bb4c6f0e21 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.254 1996/05/02 10:41:18 phk Exp $ +# $Id: LINT,v 1.255 1996/05/03 05:44:44 asami Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -726,6 +726,8 @@ device pca0 at isa? port IO_TIMER1 tty # rc: RISCom/8 multiport card # tw: TW-523 power line interface for use with X-10 home control products # si: Specialix SI/XIO 4-32 port terminal multiplexor +# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based) +# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent) # # Notes on APM @@ -761,6 +763,21 @@ device pca0 at isa? port IO_TIMER1 tty # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. +# Notes on the Stallion stl and stli drivers: +# See src/i386/isa/README.stl for complete instructions. +# This is version 0.0.5alpha, unsupported by Stallion. +# The stl driver has a secondary IO port hard coded at 0x280. You need +# to change src/i386/isa/stallion.c if you reconfigure this on the boards. +# The "flags" and "iosiz" settings on the stli driver depend on the board: +# EasyConnection 8/64 ISA: flags 23 iosiz 0x1000 +# EasyConnection 8/64 EISA: flags 24 iosiz 0x10000 +# EasyConnection 8/64 MCA: flags 25 iosiz 0x1000 +# ONboard ISA: flags 4 iosiz 0x10000 +# ONboard EISA: flags 7 iosiz 0x10000 +# ONboard MCA: flags 3 iosiz 0x10000 +# Brumby: flags 2 iosiz 0x4000 +# Stallion: flags 1 iosiz 0x10000 + device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # for the Sony CDU31/33A CDROM device scd0 at isa? port 0x230 bio @@ -784,6 +801,8 @@ device tw0 at isa? port 0x380 tty irq 11 vector twintr device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr device bqu0 at isa? port 0x150 +device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr +device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000 # # EISA devices: diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT index e268f85f14ab..45bb4c6f0e21 100644 --- a/sys/i386/conf/LINT +++ b/sys/i386/conf/LINT @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.254 1996/05/02 10:41:18 phk Exp $ +# $Id: LINT,v 1.255 1996/05/03 05:44:44 asami Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -726,6 +726,8 @@ device pca0 at isa? port IO_TIMER1 tty # rc: RISCom/8 multiport card # tw: TW-523 power line interface for use with X-10 home control products # si: Specialix SI/XIO 4-32 port terminal multiplexor +# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based) +# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent) # # Notes on APM @@ -761,6 +763,21 @@ device pca0 at isa? port IO_TIMER1 tty # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. +# Notes on the Stallion stl and stli drivers: +# See src/i386/isa/README.stl for complete instructions. +# This is version 0.0.5alpha, unsupported by Stallion. +# The stl driver has a secondary IO port hard coded at 0x280. You need +# to change src/i386/isa/stallion.c if you reconfigure this on the boards. +# The "flags" and "iosiz" settings on the stli driver depend on the board: +# EasyConnection 8/64 ISA: flags 23 iosiz 0x1000 +# EasyConnection 8/64 EISA: flags 24 iosiz 0x10000 +# EasyConnection 8/64 MCA: flags 25 iosiz 0x1000 +# ONboard ISA: flags 4 iosiz 0x10000 +# ONboard EISA: flags 7 iosiz 0x10000 +# ONboard MCA: flags 3 iosiz 0x10000 +# Brumby: flags 2 iosiz 0x4000 +# Stallion: flags 1 iosiz 0x10000 + device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # for the Sony CDU31/33A CDROM device scd0 at isa? port 0x230 bio @@ -784,6 +801,8 @@ device tw0 at isa? port 0x380 tty irq 11 vector twintr device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr device bqu0 at isa? port 0x150 +device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr +device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000 # # EISA devices: diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index e268f85f14ab..45bb4c6f0e21 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.254 1996/05/02 10:41:18 phk Exp $ +# $Id: LINT,v 1.255 1996/05/03 05:44:44 asami Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -726,6 +726,8 @@ device pca0 at isa? port IO_TIMER1 tty # rc: RISCom/8 multiport card # tw: TW-523 power line interface for use with X-10 home control products # si: Specialix SI/XIO 4-32 port terminal multiplexor +# stl: Stallion EasyIO and EasyConnection 8/32 (cd1400 based) +# stli: Stallion EasyConnection 8/64, ONboard, Brumby (intelligent) # # Notes on APM @@ -761,6 +763,21 @@ device pca0 at isa? port IO_TIMER1 tty # The Rev 2 host cards use a 32K chunk, on a 32K boundary. # The cards can use an IRQ of 11, 12 or 15. +# Notes on the Stallion stl and stli drivers: +# See src/i386/isa/README.stl for complete instructions. +# This is version 0.0.5alpha, unsupported by Stallion. +# The stl driver has a secondary IO port hard coded at 0x280. You need +# to change src/i386/isa/stallion.c if you reconfigure this on the boards. +# The "flags" and "iosiz" settings on the stli driver depend on the board: +# EasyConnection 8/64 ISA: flags 23 iosiz 0x1000 +# EasyConnection 8/64 EISA: flags 24 iosiz 0x10000 +# EasyConnection 8/64 MCA: flags 25 iosiz 0x1000 +# ONboard ISA: flags 4 iosiz 0x10000 +# ONboard EISA: flags 7 iosiz 0x10000 +# ONboard MCA: flags 3 iosiz 0x10000 +# Brumby: flags 2 iosiz 0x4000 +# Stallion: flags 1 iosiz 0x10000 + device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # for the Sony CDU31/33A CDROM device scd0 at isa? port 0x230 bio @@ -784,6 +801,8 @@ device tw0 at isa? port 0x380 tty irq 11 vector twintr device si0 at isa? iomem 0xd0000 tty irq 12 vector siintr device asc0 at isa? port IO_ASC1 tty drq 3 irq 10 vector ascintr device bqu0 at isa? port 0x150 +device stl0 at isa? port 0x2a0 tty irq 10 vector stlintr +device stli0 at isa? port 0x2a0 tty iomem 0xcc000 flags 23 iosiz 0x1000 # # EISA devices: