d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

This commit was generated by cvs2svn to compensate for changes in r157043,

Browse Source 
which included commits to RCS files with non-trunk default branches.
This commit is contained in:
Dag-Erling Smørgrav 2006-03-23 14:02:36 +00:00
commit cb71c8b01e
5 changed files with 306 additions and 59 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

93
lib/libz/ChangeLog
View File

@ -1,6 +1,97 @@
ChangeLog file for zlib
Changes in 1.2.3 (18 July 2005)
- Apply security vulnerability fixes to contrib/infback9 as well
- Clean up some text files (carriage returns, trailing space)
- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
Changes in 1.2.2.4 (11 July 2005)
- Add inflatePrime() function for starting inflation at bit boundary
- Avoid some Visual C warnings in deflate.c
- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
compile
- Fix some spelling errors in comments [Betts]
- Correct inflateInit2() error return documentation in zlib.h
- Added zran.c example of compressed data random access to examples
directory, shows use of inflatePrime()
- Fix cast for assignments to strm->state in inflate.c and infback.c
- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
- Add cast in trees.c t avoid a warning [Oberhumer]
- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
- Update make_vms.com [Zinser]
- Initialize state->write in inflateReset() since copied in inflate_fast()
- Be more strict on incomplete code sets in inflate_table() and increase
ENOUGH and MAXD -- this repairs a possible security vulnerability for
invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
discovering the vulnerability and providing test cases.
- Add ia64 support to configure for HP-UX [Smith]
- Add error return to gzread() for format or i/o error [Levin]
- Use malloc.h for OS/2 [Necasek]
Changes in 1.2.2.3 (27 May 2005)
- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
- Typecast fread() return values in gzio.c [Vollant]
- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
- Fix crc check bug in gzread() after gzungetc() [Heiner]
- Add the deflateTune() function to adjust internal compression parameters
- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
- Remove an incorrect assertion in examples/zpipe.c
- Add C++ wrapper in infback9.h [Donais]
- Fix bug in inflateCopy() when decoding fixed codes
- Note in zlib.h how much deflateSetDictionary() actually uses
- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
- Add gzdirect() function to indicate transparent reads
- Update contrib/minizip [Vollant]
- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
- Add casts in crc32.c to avoid warnings [Oberhumer]
- Add contrib/masmx64 [Vollant]
- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
Changes in 1.2.2.2 (30 December 2004)
- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
avoid implicit memcpy calls (portability for no-library compilation)
- Increase sprintf() buffer size in gzdopen() to allow for large numbers
- Add INFLATE_STRICT to check distances against zlib header
- Improve WinCE errno handling and comments [Chang]
- Remove comment about no gzip header processing in FAQ
- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
- Add updated make_vms.com [Coghlan], update README
- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
- Add FAQ entry and comments in deflate.c on uninitialized memory access
- Add Solaris 9 make options in configure [Gilbert]
- Allow strerror() usage in gzio.c for STDC
- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
- Use z_off_t for adler32_combine() and crc32_combine() lengths
- Make adler32() much faster for small len
- Use OS_CODE in deflate() default gzip header
Changes in 1.2.2.1 (31 October 2004)
- Allow inflateSetDictionary() call for raw inflate
- Fix inflate header crc check bug for file names and comments
- Add deflateSetHeader() and gz_header structure for custom gzip headers
- Add inflateGetheader() to retrieve gzip headers
- Add crc32_combine() and adler32_combine() functions
- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
- Use zstreamp consistently in zlib.h (inflate_back functions)
- Remove GUNZIP condition from definition of inflate_mode in inflate.h
and in contrib/inflate86/inffast.S [Truta, Anderson]
- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
- Update projects/README.projects and projects/visualc6 [Truta]
- Update win32/DLL_FAQ.txt [Truta]
- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
- Use a new algorithm for setting strm->data_type in trees.c [Truta]
- Do not define an exit() prototype in zutil.c unless DEBUG defined
- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
- Fix Darwin build version identification [Peterson]
Changes in 1.2.2 (3 October 2004)
- Update zlib.h comments on gzip in-memory processing
- Set adler to 1 in inflateReset() to support Java test suite [Walles]
@ -449,7 +540,7 @@ Changes in 1.0.7 (20 Jan 1998)
Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
- Fix a deflate bug occuring only with compression level 0 (thanks to
- Fix a deflate bug occurring only with compression level 0 (thanks to
Andy Buckler for finding this one).
- In minigzip, pass transparently also the first byte for .Z files.
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()

26
lib/libz/FAQ
View File

@ -148,13 +148,6 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
format using deflateInit2(). You can also request that inflate decode
the gzip format using inflateInit2(). Read zlib.h for more details.
Note that you cannot specify special gzip header contents (e.g. a file
name or modification date), nor will inflate tell you what was in the
gzip header. If you need to customize the header or see what's in it,
you can use the raw deflate and inflate operations and the crc32()
function and roll your own gzip encoding and decoding. Read the gzip
RFC 1952 for details of the header and trailer format.
21. Is zlib thread-safe?
Yes. However any library routines that zlib uses and any application-
@ -295,20 +288,29 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
were downright silly. So now, we simply make sure that the code always
works.
36. Will zlib read the (insert any ancient or arcane format here) compressed
36. Valgrind (or some similar memory access checker) says that deflate is
performing a conditional jump that depends on an uninitialized value.
Isn't that a bug?
No. That is intentional for performance reasons, and the output of
deflate is not affected. This only started showing up recently since
zlib 1.2.x uses malloc() by default for allocations, whereas earlier
versions used calloc(), which zeros out the allocated memory.
37. Will zlib read the (insert any ancient or arcane format here) compressed
data format?
Probably not. Look in the comp.compression FAQ for pointers to various
formats and associated software.
37. How can I encrypt/decrypt zip files with zlib?
38. How can I encrypt/decrypt zip files with zlib?
zlib doesn't support encryption. The original PKZIP encryption is very weak
and can be broken with freely available programs. To get strong encryption,
use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
For PKZIP compatible "encryption", look at http://www.info-zip.org/
38. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
"gzip" is the gzip format, and "deflate" is the zlib format. They should
probably have called the second one "zlib" instead to avoid confusion
@ -324,14 +326,14 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
Bottom line: use the gzip format for HTTP 1.1 encoding.
39. Does zlib support the new "Deflate64" format introduced by PKWare?
40. Does zlib support the new "Deflate64" format introduced by PKWare?
No. PKWare has apparently decided to keep that format proprietary, since
they have not documented it as they have previous compression formats.
In any case, the compression improvements are so modest compared to other
more modern approaches, that it's not worth the effort to implement.
40. Can you please sign these lengthy legal documents and fax them back to us
41. Can you please sign these lengthy legal documents and fax them back to us
so that we can use your software in our product?
No. Go away. Shoo.

9
lib/libz/README
View File

@ -1,6 +1,6 @@
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.2 is a general purpose data compression library. All the code is
zlib 1.2.3 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@ -16,9 +16,8 @@ minigzip.c.
To compile all files and run the test program, follow the instructions given at
the top of Makefile. In short "make test; make install" should work for most
machines. For Unix: "./configure; make test; make install" For MSDOS, use one
of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
descrip.mms.
machines. For Unix: "./configure; make test; make install". For MSDOS, use one
of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
<info@winimage.com> for the Windows DLL version. The zlib home page is
@ -34,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
The changes made in version 1.2.2 are documented in the file ChangeLog.
The changes made in version 1.2.3 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".

8
lib/libz/inflate.h
View File

@ -1,5 +1,5 @@
/* inflate.h -- internal inflate state definition
* Copyright (C) 1995-2003 Mark Adler
* Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@ -19,7 +19,6 @@
/* Possible inflate modes between inflate() calls */
typedef enum {
HEAD, /* i: waiting for magic header */
#ifdef GUNZIP
FLAGS, /* i: waiting for method and flags (gzip) */
TIME, /* i: waiting for modification time (gzip) */
OS, /* i: waiting for extra flags and operating system (gzip) */
@ -28,7 +27,6 @@ typedef enum {
NAME, /* i: waiting for end of file name (gzip) */
COMMENT, /* i: waiting for end of comment (gzip) */
HCRC, /* i: waiting for header crc (gzip) */
#endif
DICTID, /* i: waiting for dictionary check value */
DICT, /* waiting for inflateSetDictionary() call */
TYPE, /* i: waiting for type bits, including last-flag bit */
@ -45,9 +43,7 @@ typedef enum {
MATCH, /* o: waiting for output space to copy string */
LIT, /* o: waiting for output space to write literal */
CHECK, /* i: waiting for 32-bit check value */
#ifdef GUNZIP
LENGTH, /* i: waiting for 32-bit length (gzip) */
#endif
DONE, /* finished check, done -- remain here until reset */
BAD, /* got a data error -- remain here until reset */
MEM, /* got an inflate() memory error -- remain here until reset */
@ -84,8 +80,10 @@ struct inflate_state {
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
int havedict; /* true if dictionary provided */
int flags; /* gzip header method and flags (0 if zlib) */
unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
unsigned long check; /* protected copy of check value */
unsigned long total; /* protected copy of output count */
gz_headerp head; /* where to save gzip header information */
/* sliding window */
unsigned wbits; /* log base 2 of requested window size */
unsigned wsize; /* window size or zero if not using window */

229
lib/libz/zlib.h
View File

@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
version 1.2.2, October 3rd, 2004
version 1.2.3, July 18th, 2005
Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@ -37,8 +37,8 @@
extern "C" {
#endif
#define ZLIB_VERSION "1.2.2"
#define ZLIB_VERNUM 0x1220
#define ZLIB_VERSION "1.2.3"
#define ZLIB_VERNUM 0x1230
/*
The 'zlib' compression library provides in-memory compression and
@ -95,13 +95,36 @@ typedef struct z_stream_s {
free_func zfree; /* used to free the internal state */
voidpf opaque; /* private data object passed to zalloc and zfree */
int data_type; /* best guess about the data type: ascii or binary */
int data_type; /* best guess about the data type: binary or text */
uLong adler; /* adler32 value of the uncompressed data */
uLong reserved; /* reserved for future use */
} z_stream;
typedef z_stream FAR *z_streamp;
/*
gzip header information passed to and from zlib routines. See RFC 1952
for more details on the meanings of these fields.
*/
typedef struct gz_header_s {
int text; /* true if compressed data believed to be text */
uLong time; /* modification time */
int xflags; /* extra flags (not used when writing a gzip file) */
int os; /* operating system */
Bytef *extra; /* pointer to extra field or Z_NULL if none */
uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
uInt extra_max; /* space at extra (only when reading header) */
Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
uInt name_max; /* space at name (only when reading header) */
Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
uInt comm_max; /* space at comment (only when reading header) */
int hcrc; /* true if there was or will be a header crc */
int done; /* true when done reading gzip header (not used
when writing a gzip file) */
} gz_header;
typedef gz_header FAR *gz_headerp;
/*
The application must update next_in and avail_in when avail_in has
dropped to zero. It must update next_out and avail_out when avail_out
@ -166,11 +189,13 @@ typedef z_stream FAR *z_streamp;
#define Z_FILTERED 1
#define Z_HUFFMAN_ONLY 2
#define Z_RLE 3
#define Z_FIXED 4
#define Z_DEFAULT_STRATEGY 0
/* compression strategy; see deflateInit2() below for details */
#define Z_BINARY 0
#define Z_ASCII 1
#define Z_TEXT 1
#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
#define Z_UNKNOWN 2
/* Possible values of the data_type field (though see inflate()) */
@ -244,6 +269,10 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
and with zero avail_out, it must be called again after making room in the
output buffer because there might be more output pending.
Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
decide how much data to accumualte before producing output, in order to
maximize compression.
If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
flushed to the output buffer and the output is aligned on a byte boundary, so
that the decompressor can get all input data available so far. (In particular
@ -255,7 +284,7 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
Z_SYNC_FLUSH, and the compression state is reset so that decompression can
restart from this point if previous compressed data has been damaged or if
random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
the compression.
compression.
If deflate returns with avail_out == 0, this function must be called again
with the same value of the flush parameter and more output space (updated
@ -280,8 +309,8 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
deflate() sets strm->adler to the adler32 checksum of all input read
so far (that is, total_in bytes).
deflate() may update data_type if it can make a good guess about
the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
deflate() may update strm->data_type if it can make a good guess about
the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
binary. This field is only for information purposes and does not affect
the compression algorithm in any manner.
@ -363,11 +392,11 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
output as possible to the output buffer. Z_BLOCK requests that inflate() stop
if and when it get to the next deflate block boundary. When decoding the zlib
or gzip format, this will cause inflate() to return immediately after the
header and before the first block. When doing a raw inflate, inflate() will
go ahead and process the first block, and will return when it gets to the end
of that block, or when it runs out of data.
if and when it gets to the next deflate block boundary. When decoding the
zlib or gzip format, this will cause inflate() to return immediately after
the header and before the first block. When doing a raw inflate, inflate()
will go ahead and process the first block, and will return when it gets to
the end of that block, or when it runs out of data.
The Z_BLOCK option assists in appending to or combining deflate streams.
Also to assist in this, on return inflate() will set strm->data_type to the
@ -496,7 +525,9 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
parameter only affects the compression ratio but not the correctness of the
compressed output even if it is not set appropriately.
compressed output even if it is not set appropriately. Z_FIXED prevents the
use of dynamic Huffman codes, allowing for a simpler decoder for special
applications.
deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
@ -525,7 +556,9 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
deflateInit or deflateInit2, a part of the dictionary may in effect be
discarded, for example if the dictionary is larger than the window size in
deflate or deflate2. Thus the strings most likely to be useful should be
put at the end of the dictionary, not at the front.
put at the end of the dictionary, not at the front. In addition, the
current implementation of deflate will use at most the window size minus
262 bytes of the provided dictionary.
Upon return of this function, strm->adler is set to the adler32 value
of the dictionary; the decompressor may later use this value to determine
@ -591,6 +624,23 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
if strm->avail_out was zero.
*/
ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
int good_length,
int max_lazy,
int nice_length,
int max_chain));
/*
Fine tune deflate's internal compression parameters. This should only be
used by someone who understands the algorithm used by zlib's deflate for
searching for the best matching string, and even then only by the most
fanatic optimizer trying to squeeze out the last compressed bit for their
specific input data. Read the deflate.c source code for the meaning of the
max_lazy, good_length, nice_length, and max_chain parameters.
deflateTune() can be called after deflateInit() or deflateInit2(), and
returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
*/
ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
uLong sourceLen));
/*
@ -616,6 +666,30 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
stream state was inconsistent.
*/
ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
gz_headerp head));
/*
deflateSetHeader() provides gzip header information for when a gzip
stream is requested by deflateInit2(). deflateSetHeader() may be called
after deflateInit2() or deflateReset() and before the first call of
deflate(). The text, time, os, extra field, name, and comment information
in the provided gz_header structure are written to the gzip header (xflag is
ignored -- the extra flags are set according to the compression level). The
caller must assure that, if not Z_NULL, name and comment are terminated with
a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
available there. If hcrc is true, a gzip header crc is included. Note that
the current versions of the command-line version of gzip (up through version
1.3.x) do not support header crc's, and will report that it is a "multi-part
gzip file" and give up.
If deflateSetHeader is not used, the default gzip header has text false,
the time set to zero, and os set to 255, with no extra, name, or comment
fields. The gzip header is returned to the default state by deflateReset().
deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
/*
ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
int windowBits));
@ -648,15 +722,15 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
windowBits can also be greater than 15 for optional gzip decoding. Add
32 to windowBits to enable zlib and gzip decoding with automatic header
detection, or add 16 to decode only the gzip format (the zlib format will
return a Z_DATA_ERROR. If a gzip stream is being decoded, strm->adler is
return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
a crc32 instead of an adler32.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
memLevel). msg is set to null if there is no error message. inflateInit2
does not perform any decompression apart from reading the zlib header if
present: this will be done by inflate(). (So next_in and avail_in may be
modified, but next_out and avail_out are unchanged.)
memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
is set to null if there is no error message. inflateInit2 does not perform
any decompression apart from reading the zlib header if present: this will
be done by inflate(). (So next_in and avail_in may be modified, but next_out
and avail_out are unchanged.)
*/
ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
@ -664,11 +738,14 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
uInt dictLength));
/*
Initializes the decompression dictionary from the given uncompressed byte
sequence. This function must be called immediately after a call of inflate
if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
can be determined from the adler32 value returned by this call of
inflate. The compressor and decompressor must use exactly the same
dictionary (see deflateSetDictionary).
sequence. This function must be called immediately after a call of inflate,
if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
can be determined from the adler32 value returned by that call of inflate.
The compressor and decompressor must use exactly the same dictionary (see
deflateSetDictionary). For raw inflate, this function can be called
immediately after inflateInit2() or inflateReset() and before any call of
inflate() to set the dictionary. The application must insure that the
dictionary that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
parameter is invalid (such as NULL dictionary) or the stream state is
@ -719,8 +796,64 @@ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
stream state was inconsistent (such as zalloc or state being NULL).
*/
ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
int bits,
int value));
/*
ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits,
This function inserts bits in the inflate input stream. The intent is
that this function is used to start inflating at a bit position in the
middle of a byte. The provided bits will be used before any bytes are used
from next_in. This function should only be used with raw inflate, and
should be used before the first inflate() call after inflateInit2() or
inflateReset(). bits must be less than or equal to 16, and that many of the
least significant bits of value will be inserted in the input.
inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
gz_headerp head));
/*
inflateGetHeader() requests that gzip header information be stored in the
provided gz_header structure. inflateGetHeader() may be called after
inflateInit2() or inflateReset(), and before the first call of inflate().
As inflate() processes the gzip stream, head->done is zero until the header
is completed, at which time head->done is set to one. If a zlib stream is
being decoded, then head->done is set to -1 to indicate that there will be
no gzip header information forthcoming. Note that Z_BLOCK can be used to
force inflate() to return immediately after header processing is complete
and before any actual data is decompressed.
The text, time, xflags, and os fields are filled in with the gzip header
contents. hcrc is set to true if there is a header CRC. (The header CRC
was valid if done is set to one.) If extra is not Z_NULL, then extra_max
contains the maximum number of bytes to write to extra. Once done is true,
extra_len contains the actual extra field length, and extra contains the
extra field, or that field truncated if extra_max is less than extra_len.
If name is not Z_NULL, then up to name_max characters are written there,
terminated with a zero unless the length is greater than name_max. If
comment is not Z_NULL, then up to comm_max characters are written there,
terminated with a zero unless the length is greater than comm_max. When
any of extra, name, or comment are not Z_NULL and the respective field is
not present in the header, then that field is set to Z_NULL to signal its
absence. This allows the use of deflateSetHeader() with the returned
structure to duplicate the header. However if those fields are set to
allocated memory, then the application will need to save those pointers
elsewhere so that they can be eventually freed.
If inflateGetHeader is not used, then the header information is simply
discarded. The header is always checked for validity, including the header
CRC if present. inflateReset() will reset the process to discard the header
information. The application would need to call inflateGetHeader() again to
retrieve the header from the next gzip stream.
inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
/*
ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
unsigned char FAR *window));
Initialize the internal stream state for decompression using inflateBack()
@ -744,7 +877,7 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits,
typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
in_func in, void FAR *in_desc,
out_func out, void FAR *out_desc));
/*
@ -813,7 +946,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
that inflateBack() cannot return Z_OK.
*/
ZEXTERN int ZEXPORT inflateBackEnd OF((z_stream FAR *strm));
ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
/*
All memory allocated by inflateBackInit() is freed.
@ -1087,6 +1220,12 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file));
input stream, otherwise zero.
*/
ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
/*
Returns 1 if file is being read directly without decompression, otherwise
zero.
*/
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
/*
Flushes all pending output if necessary, closes the compressed file
@ -1119,7 +1258,6 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
*/
ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
/*
Update a running Adler-32 checksum with the bytes buf[0..len-1] and
return the updated checksum. If buf is NULL, this function returns
@ -1135,12 +1273,21 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
if (adler != original_adler) error();
*/
ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
z_off_t len2));
/*
Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
*/
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
Update a running crc with the bytes buf[0..len-1] and return the updated
crc. If buf is NULL, this function returns the required initial value
for the crc. Pre- and post-conditioning (one's complement) is performed
within this function so it shouldn't be done by the application.
Update a running CRC-32 with the bytes buf[0..len-1] and return the
updated CRC-32. If buf is NULL, this function returns the required initial
value for the for the crc. Pre- and post-conditioning (one's complement) is
performed within this function so it shouldn't be done by the application.
Usage example:
uLong crc = crc32(0L, Z_NULL, 0);
@ -1151,6 +1298,16 @@ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
if (crc != original_crc) error();
*/
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
/*
Combine two CRC-32 check values into one. For two sequences of bytes,
seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
len2.
*/
/* various hacks, don't look :) */
@ -1167,7 +1324,7 @@ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
int stream_size));
ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
const char *version, int stream_size));
ZEXTERN int ZEXPORT inflateBackInit_ OF((z_stream FAR *strm, int windowBits,
ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
unsigned char FAR *window,
const char *version,
int stream_size));