d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add driver for Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet.

Browse Source 
This driver was written by Alexander Pohoyda and greatly enhanced
by Nikolay Denev. I don't have these hardwares but this driver was
tested by Nikolay Denev and xclin.

Because SiS didn't release data sheet for this controller, programming
information came from Linux driver and OpenSolaris. Unlike other open
source driver for SiS190/191, sge(4) takes full advantage of TX/RX
checksum offloading and does not require additional copy operation in
RX handler.
The controller seems to have advanced offloading features like VLAN
hardware tag insertion/stripping, TCP segmentation offload(TSO) as
well as jumbo frame support but these features are not available
yet. Special thanks to xclin <xclin<> cs dot nctu dot edu dot tw>
who sent fix for receiving VLAN oversized frames.
This commit is contained in:
Pyun YongHyeon 2010-04-14 20:45:33 +00:00
parent d578fbb66e
commit d193ed0bed
9 changed files with 2110 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
sys/amd64/conf/GENERIC
View File

@ -224,6 +224,7 @@ device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sge # Silicon Integrated Systems SiS190/191
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)

1
sys/boot/forth/loader.conf
View File

@ -271,6 +271,7 @@ if_rl_load="NO" # RealTek 8129/8139
if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet
if_sbni_load="NO" # Granch SBNI12 leased line adapters
if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
if_sge_load="NO" # Silicon Integrated Systems SiS190/191
if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet
if_sn_load="NO" # SMC 91Cxx

2
sys/conf/NOTES
View File

@ -1952,6 +1952,7 @@ device xmphy # XaQti XMAC II
# This includes dual and quad port cards, as well as one 100baseFX card.
# Most of these are 64-bit PCI devices, except for one single port
# card which is 32-bit.
# sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter
# sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
# SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
# sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
@ -2046,6 +2047,7 @@ device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device pcn # AMD Am79C97x PCI 10/100 NICs
device sf # Adaptec AIC-6915 (``Starfire'')
device sge # Silicon Integrated Systems SiS190/191
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)

1
sys/conf/files
View File

@ -1490,6 +1490,7 @@ dev/scd/scd.c optional scd isa
dev/scd/scd_isa.c optional scd isa
dev/sdhci/sdhci.c optional sdhci pci
dev/sf/if_sf.c optional sf pci
dev/sge/if_sge.c optional sge pci
dev/si/si.c optional si
dev/si/si2_z280.c optional si
dev/si/si3_t225.c optional si

1745
sys/dev/sge/if_sge.c Normal file
View File

File diff suppressed because it is too large Load Diff

350
sys/dev/sge/if_sgereg.h Normal file
View File

@ -0,0 +1,350 @@
/*-
* Copyright (c) 2008, 2009, 2010 Nikolay Denev <ndenev@gmail.com>
* Copyright (c) 2007, 2008 Alexander Pohoyda <alexander.pohoyda@gmx.net>
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AUTHORS OR
* THE VOICES IN THEIR HEADS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IF_SGEREG_H
#define _IF_SGEREG_H
/*
* SiS PCI vendor ID.
*/
#define SIS_VENDORID 0x1039
/*
* SiS PCI device IDs
*/
#define SIS_DEVICEID_190 0x0190
#define SIS_DEVICEID_191 0x0191
#define TX_CTL 0x00
#define TX_DESC 0x04
#define Reserved0 0x08
#define TX_NEXT 0x0c
#define RX_CTL 0x10
#define RX_DESC 0x14
#define Reserved1 0x18
#define RX_NEXT 0x1c
#define IntrStatus 0x20
#define IntrMask 0x24
#define IntrControl 0x28
#define IntrTimer 0x2c
#define PMControl 0x30
#define Reserved2 0x34
#define ROMControl 0x38
#define ROMInterface 0x3c
#define StationControl 0x40
#define GMIIControl 0x44
#define GMacIOCR 0x48
#define GMacIOCTL 0x4c
#define TxMacControl 0x50
#define TxMacTimeLimit 0x54
#define RGMIIDelay 0x58
#define Reserved3 0x5c
#define RxMacControl 0x60 /* 1 WORD */
#define RxMacAddr 0x62 /* 6x BYTE */
#define RxHashTable 0x68 /* 1 LONG */
#define RxHashTable2 0x6c /* 1 LONG */
#define RxWakeOnLan 0x70
#define RxWakeOnLanData 0x74
#define RxMPSControl 0x78
#define Reserved4 0x7c
/*
* IntrStatus Register Content
*/
#define INTR_SOFT 0x40000000
#define INTR_TIMER 0x20000000
#define INTR_PAUSE_FRAME 0x00080000
#define INTR_MAGIC_FRAME 0x00040000
#define INTR_WAKE_FRAME 0x00020000
#define INTR_LINK 0x00010000
#define INTR_RX_IDLE 0x00000080
#define INTR_RX_DONE 0x00000040
#define INTR_TXQ1_IDLE 0x00000020
#define INTR_TXQ1_DONE 0x00000010
#define INTR_TX_IDLE 0x00000008
#define INTR_TX_DONE 0x00000004
#define INTR_RX_HALT 0x00000002
#define INTR_TX_HALT 0x00000001
#define SGE_INTRS \
(INTR_RX_IDLE | INTR_RX_DONE | INTR_TXQ1_IDLE | \
INTR_TXQ1_DONE |INTR_TX_IDLE | INTR_TX_DONE | \
INTR_TX_HALT | INTR_RX_HALT)
/*
* RxStatusDesc Register Content
*/
#define RxRES 0x00200000
#define RxCRC 0x00080000
#define RxRUNT 0x00100000
#define RxRWT 0x00400000
/*
* RX_CTL Register Content
*/
#define RX_CTL_POLL 0x00000010
#define RX_CTL_ENB 0x00000001
/*
* TX_CTL Register Content
*/
#define TX_CTL_POLL 0x00000010
#define TX_CTL_ENB 0x00000001
/*
* RxMacControl Register Content
*/
#define AcceptBroadcast 0x0800
#define AcceptMulticast 0x0400
#define AcceptMyPhys 0x0200
#define AcceptAllPhys 0x0100
#define AcceptErr 0x0020
#define AcceptRunt 0x0010
/* Station control register. */
#define SC_LOOPBACK 0x80000000
#define SC_RGMII 0x00008000
#define SC_FDX 0x00001000
#define SC_SPEED_MASK 0x00000c00
#define SC_SPEED_10 0x00000400
#define SC_SPEED_100 0x00000800
#define SC_SPEED_1000 0x00000c00
/*
* Gigabit Media Independent Interface CTL register
*/
#define GMI_DATA 0xffff0000
#define GMI_DATA_SHIFT 16
#define GMI_REG 0x0000f800
#define GMI_REG_SHIFT 11
#define GMI_PHY 0x000007c0
#define GMI_PHY_SHIFT 6
#define GMI_OP_WR 0x00000020
#define GMI_OP_RD 0x00000000
#define GMI_REQ 0x00000010
#define GMI_MDIO 0x00000008
#define GMI_MDDIR 0x00000004
#define GMI_MDC 0x00000002
#define GMI_MDEN 0x00000001
/* Tx descriptor command bits. */
#define TDC_OWN 0x80000000
#define TDC_INTR 0x40000000
#define TDC_THOL3 0x30000000
#define TDC_THOL2 0x20000000
#define TDC_THOL1 0x10000000
#define TDC_THOL0 0x00000000
#define TDC_LS 0x08000000
#define TDC_IP_CSUM 0x04000000
#define TDC_TCP_CSUM 0x02000000
#define TDC_UDP_CSUM 0x01000000
#define TDC_BST 0x00800000
#define TDC_EXT 0x00400000
#define TDC_DEF 0x00200000
#define TDC_BKF 0x00100000
#define TDC_CRS 0x00080000
#define TDC_COL 0x00040000
#define TDC_CRC 0x00020000
#define TDC_PAD 0x00010000
#define SGE_TX_INTR_FRAMES 32
/*
* TX descriptor status bits.
*/
#define TDS_OWC 0x00080000
#define TDS_ABT 0x00040000
#define TDS_FIFO 0x00020000
#define TDS_CRS 0x00010000
#define TDS_COLLS 0x0000ffff
#define SGE_TX_ERROR(x) ((x) & (TDS_OWC | TDS_ABT | TDS_FIFO | TDS_CRS))
#define TX_ERR_BITS "\20" \
"\21CRS\22FIFO\23ABT\24OWC"
/* Rx descriptor command bits. */
#define RDC_OWN 0x80000000
#define RDC_INTR 0x40000000
#define RDC_IP_CSUM 0x20000000
#define RDC_TCP_CSUM 0x10000000
#define RDC_UDP_CSUM 0x08000000
#define RDC_IP_CSUM_OK 0x04000000
#define RDC_TCP_CSUM_OK 0x02000000
#define RDC_UDP_CSUM_OK 0x01000000
#define RDC_WAKEUP 0x00400000
#define RDC_MAGIC 0x00200000
#define RDC_PAUSE 0x00100000
#define RDC_BCAST 0x000c0000
#define RDC_MCAST 0x00080000
#define RDC_UCAST 0x00040000
#define RDC_CRCOFF 0x00020000
#define RDC_PREADD 0x00010000
/*
* RX descriptor status bits
*/
#define RDS_TAGON 0x80000000
#define RDS_DESCS 0x3f000000
#define RDS_ABORT 0x00800000
#define RDS_SHORT 0x00400000
#define RDS_LIMIT 0x00200000
#define RDS_MIIER 0x00100000
#define RDS_OVRUN 0x00080000
#define RDS_NIBON 0x00040000
#define RDS_COLON 0x00020000
#define RDS_CRCOK 0x00010000
#define SGE_RX_ERROR(x) \
((x) & (RDS_COLON | RDS_NIBON | RDS_OVRUN | RDS_MIIER | \
RDS_LIMIT | RDS_SHORT | RDS_ABORT))
#define SGE_RX_NSEGS(x) (((x) & RDS_DESCS) >> 24)
#define RX_ERR_BITS "\20" \
"\21CRCOK\22COLON\23NIBON\24OVRUN" \
"\25MIIER\26LIMIT\27SHORT\30ABORT" \
"\40TAGON"
#define RING_END 0x80000000
#define SGE_RX_BYTES(x) ((x) & 0xFFFF)
#define SGE_INC(x, y) (x) = (((x) + 1) % y)
/* Taken from Solaris driver */
#define EI_DATA 0xffff0000
#define EI_DATA_SHIFT 16
#define EI_OFFSET 0x0000fc00
#define EI_OFFSET_SHIFT 10
#define EI_OP 0x00000300
#define EI_OP_SHIFT 8
#define EI_OP_RD (2 << EI_OP_SHIFT)
#define EI_OP_WR (1 << EI_OP_SHIFT)
#define EI_REQ 0x00000080
#define EI_DO 0x00000008
#define EI_DI 0x00000004
#define EI_CLK 0x00000002
#define EI_CS 0x00000001
/*
* EEPROM Addresses
*/
#define EEPROMSignature 0x00
#define EEPROMCLK 0x01
#define EEPROMInfo 0x02
#define EEPROMMACAddr 0x03
struct sge_desc {
uint32_t sge_sts_size;
uint32_t sge_cmdsts;
uint32_t sge_ptr;
uint32_t sge_flags;
};
#define SGE_RX_RING_CNT 256 /* [8, 1024] */
#define SGE_TX_RING_CNT 256 /* [8, 8192] */
#define SGE_DESC_ALIGN 16
#define SGE_MAXTXSEGS 1
#define SGE_RX_BUF_ALIGN sizeof(uint64_t)
#define SGE_RX_RING_SZ (SGE_RX_RING_CNT * sizeof(struct sge_desc))
#define SGE_TX_RING_SZ (SGE_TX_RING_CNT * sizeof(struct sge_desc))
#define SGE_ADDR_LO(x) ((uint64_t) (x) & 0xFFFFFFFF)
struct sge_list_data {
struct sge_desc *sge_rx_ring;
struct sge_desc *sge_tx_ring;
/* physical bus addresses of sge_rx_ring/sge_tx_ring */
bus_addr_t sge_rx_paddr;
bus_addr_t sge_tx_paddr;
};
struct sge_chain_data {
bus_dma_tag_t sge_tag;
bus_dma_tag_t sge_rx_tag;
bus_dma_tag_t sge_tx_tag;
bus_dmamap_t sge_rx_dmamap;
bus_dmamap_t sge_tx_dmamap;
bus_dma_tag_t sge_txmbuf_tag;
bus_dma_tag_t sge_rxmbuf_tag;
struct mbuf *sge_rx_mbuf[SGE_RX_RING_CNT];
struct mbuf *sge_tx_mbuf[SGE_TX_RING_CNT];
bus_dmamap_t sge_rx_map[SGE_RX_RING_CNT];
bus_dmamap_t sge_rx_spare_map;
bus_dmamap_t sge_tx_map[SGE_TX_RING_CNT];
int sge_rx_cons;
int sge_tx_prod;
int sge_tx_cons;
int sge_tx_cnt;
};
struct sge_type {
uint16_t sge_vid;
uint16_t sge_did;
char *sge_name;
};
struct sge_softc {
struct ifnet *sge_ifp; /* interface info */
struct resource *sge_res;
int sge_res_id;
int sge_res_type;
struct resource *sge_irq;
void *sge_intrhand;
device_t sge_dev;
device_t sge_miibus;
uint8_t sge_rev;
struct sge_list_data sge_ldata;
struct sge_chain_data sge_cdata;
struct callout sge_stat_ch;
int sge_timer;
int sge_flags;
#define SGE_FLAG_FASTETHER 0x0001
#define SGE_FLAG_RGMII 0x0010
#define SGE_FLAG_SPEED_1000 0x2000
#define SGE_FLAG_FDX 0x4000
#define SGE_FLAG_LINK 0x8000
int sge_if_flags;
int sge_intrcontrol;
int sge_intrtimer;
struct mtx sge_mtx;
};
#define SGE_LOCK(_sc) mtx_lock(&(_sc)->sge_mtx)
#define SGE_UNLOCK(_sc) mtx_unlock(&(_sc)->sge_mtx)
#define SGE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sge_mtx, MA_OWNED)
#define SGE_TIMEOUT 1000
#endif /* _IF_SGEREG_H */

1
sys/i386/conf/GENERIC
View File

@ -235,6 +235,7 @@ device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sge # Silicon Integrated Systems SiS190/191
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)

1
sys/modules/Makefile
View File

@ -252,6 +252,7 @@ SUBDIR= ${_3dfx} \
sdhci \
sem \
sf \
sge \
siba_bwn \
siis \
sis \

8
sys/modules/sge/Makefile Normal file
View File

@ -0,0 +1,8 @@
# $FreeBSD$
.PATH: ${.CURDIR}/../../dev/sge
KMOD= if_sge
SRCS= if_sge.c device_if.h bus_if.h pci_if.h miibus_if.h
.include <bsd.kmod.mk>