diff --git a/etc/rc b/etc/rc
index 8fc9e4066a8d..e06d0e17b625 100644
--- a/etc/rc
+++ b/etc/rc
@@ -1,5 +1,5 @@
 #!/bin/sh
-#	$Id: rc,v 1.85 1996/02/23 10:44:49 adam Exp $
+#	$Id: rc,v 1.86 1996/03/12 15:39:24 nate Exp $
 #	From: @(#)rc	5.27 (Berkeley) 6/5/91
 
 # System startup script run by init on autoboot
@@ -95,8 +95,8 @@ if [ -f /etc/rc.serial ]; then
 fi
 
 # start up PC-card configuration
-if [ -f /etc/pccardstart ]; then
-	. /etc/pccardstart
+if [ -f /etc/rc.pccard ]; then
+	. /etc/rc.pccard
 fi
 
 # start up the network
diff --git a/etc/pccard_start b/etc/rc.d/pccard
similarity index 89%
rename from etc/pccard_start
rename to etc/rc.d/pccard
index e96f30773d38..597e89450ef6 100644
--- a/etc/pccard_start
+++ b/etc/rc.d/pccard
@@ -10,7 +10,7 @@ if [ "x$apm_enable" = "xYES" ] ; then
 fi
 
 if [ "x$pccard_enable" != "xNO" ] ; then
-	if [ "x$pccard_mem" != "xNO" ] ; then
+	if [ "x$pccard_mem" != "xDEFAULT" ] ; then
 		/usr/sbin/pccardc pccardmem $pccard_mem
 	else
 		/usr/sbin/pccardc pccardmem 0xd0000
diff --git a/etc/rc.pccard b/etc/rc.pccard
new file mode 100644
index 000000000000..597e89450ef6
--- /dev/null
+++ b/etc/rc.pccard
@@ -0,0 +1,20 @@
+#!/bin/sh -
+#
+# PC-card startup script
+# HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
+#
+
+if [ "x$apm_enable" = "xYES" ] ; then
+	echo "Enable APM BIOS."
+	/usr/sbin/apmconf -e
+fi
+
+if [ "x$pccard_enable" != "xNO" ] ; then
+	if [ "x$pccard_mem" != "xDEFAULT" ] ; then
+		/usr/sbin/pccardc pccardmem $pccard_mem
+	else
+		/usr/sbin/pccardc pccardmem 0xd0000
+	fi
+	echo -n "Enable PC-card." 
+	/usr/sbin/pccardd 2>&1 > /var/log/pccardd.debug &
+fi
diff --git a/etc/sysconfig b/etc/sysconfig
index 31fbd734399b..1ea5f0fc671f 100644
--- a/etc/sysconfig
+++ b/etc/sysconfig
@@ -4,7 +4,7 @@
 # This is sysconfig - a file full of useful variables that you can set 
 # to change the default startup behavior of your system.
 #
-#	$Id: sysconfig,v 1.40 1996/03/06 03:59:15 jkh Exp $
+#	$Id: sysconfig,v 1.41 1996/03/12 15:39:26 nate Exp $
 
 ######################### Start Of Local Configuration Section ###########
 
@@ -212,8 +212,8 @@ apm_enable=NO
 pccard_enable=NO
 
 # If you want to specify the address of memory used by PCIC, 
-# set this address (NO for default 0xd0000)
-pccard_mem=NO
+# set this address (DEFAULT=0xd0000)
+pccard_mem=DEFAULT
 
 # If you want to use Etnerent PCMCIA cards, specify the ifconfig portion
 # here.  (card-specific flags like connector selection should be written in