Bring over the AR9285 specific PCIe suspend/resume/ASPM workarounds.

Obtained from:	Qualcomm Atheros, Linux ath9k
This commit is contained in:
Adrian Chadd 2012-06-17 04:48:47 +00:00
parent 3e5999f206
commit daf9887596

View File

@ -367,18 +367,71 @@ ar9285Attach(uint16_t devid, HAL_SOFTC sc,
static void
ar9285ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off)
{
uint32_t val;
if (AH_PRIVATE(ah)->ah_ispcie && !restore) {
ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0);
OS_DELAY(1000);
}
/*
* Set PCIe workaround bits
*
* NOTE:
*
* In Merlin and Kite, bit 14 in WA register (disable L1) should only
* be set when device enters D3 and be cleared when device comes back
* to D0.
*/
if (power_off) { /* Power-off */
OS_REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
val = OS_REG_READ(ah, AR_WA);
/*
* Disable bit 6 and 7 before entering D3 to prevent
* system hang.
*/
val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
/*
* See above: set AR_WA_D3_L1_DISABLE when entering D3 state.
*
* XXX The reference HAL does it this way - it only sets
* AR_WA_D3_L1_DISABLE if it's set in AR9280_WA_DEFAULT,
* which it (currently) isn't. So the following statement
* is currently a NOP.
*/
if (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
val |= AR_WA_D3_L1_DISABLE;
if (AR_SREV_9285E_20(ah))
val |= AR_WA_BIT23;
OS_REG_WRITE(ah, AR_WA, val);
} else { /* Power-on */
val = AR9285_WA_DEFAULT;
/*
* See note above: make sure L1_DISABLE is not set.
*/
val &= (~AR_WA_D3_L1_DISABLE);
/* Software workaroud for ASPM system hang. */
val |= (AR_WA_BIT6 | AR_WA_BIT7);
if (AR_SREV_9285E_20(ah))
val |= AR_WA_BIT23;
OS_REG_WRITE(ah, AR_WA, val);
/* set bit 19 to allow forcing of pcie core into L1 state */
OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
OS_REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT);
}
}
static void
ar9285DisablePCIE(struct ath_hal *ah)
{
/* XXX TODO */
}
static void