According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
These allow one to non-destructively iterate over the set or clear bits
in a bitset. The motivation is that we have several code fragments
which iterate over a CPU set like this:
while ((cpu = CPU_FFS(&cpus)) != 0) {
cpu--;
CPU_CLR(cpu, &cpus);
<do something>;
}
This is slow since CPU_FFS begins the search at the beginning of the
bitset each time. On amd64 and arm64, CPU sets have size 256, so there
are four limbs in the bitset and we do a lot of unnecessary scanning.
A second problem is that this is destructive, so code which needs to
preserve the original set has to make a copy. In particular, we have
quite a few functions which take a cpuset_t parameter by value, meaning
that each call has to copy the 32 byte cpuset_t.
The new macros address both problems.
Reviewed by: cem, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32028
Generialize bus specific property accessors. Those functions allow driver code
to access device specific information.
Currently there is only support for FDT and ACPI buses.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31597
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails. This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.
Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails. This is
considered future work, since the behavior matches.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D24570
- Some configurations, e.g. HP EliteBook 840 G3, come with a dummy card
in the card slot which is detected as a valid SD card. This added long
timeout at boot time. To alleviate the problem, the default timeout is
reduced to one second during the setup phase. [1]
- Some configurations crash at boot if rtsx(4) is defined in the kernel
config. At boot time, without a card inserted, the driver found that
a card is present and just after that a "spontaneous" interrupt is
generated showing that no card is present. To solve this problem,
DELAY(9) is set to one quarter of a second before checking card presence
during driver attach.
- As advised by adrian, taskqueue and DMA are set up sooner during
the driver attach. A heuristic to try to detect configuration needing
inversion was added.
PR: 255130 [1]
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30499
Adds documentation for the TCP_FASTOPEN socket option
and related MIB variables to the tcp(4) manual page.
PR: 257907
Reviewed by: gbe
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D31764
Implement lock_spin()/unlock_spin() lock class methods, moving the
assertion to _sleep() instead. Change assertions in callout(9) to
allow spin locks for both regular and C_DIRECT_EXEC cases. In case of
C_DIRECT_EXEC callouts spin locks are the only locks allowed actually.
As the first use case allow taskqueue_enqueue_timeout() use on fast
task queues. It actually becomes more efficient due to avoided extra
context switches in callout(9) thanks to C_DIRECT_EXEC.
MFC after: 2 weeks
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D31778
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential revision: https://reviews.freebsd.org/D31762
Bind RX/TX queues and MSI-X vectors to matching CPUs based on the RSS
bucket entries.
Introduce sysctls for the following RSS functionality:
- rss.indir_table: indirection table mapping
- rss.indir_table_size: indirection table size
- rss.key: RSS hash key (if Toeplitz used)
Said sysctls are only available when compiled without `option RSS`, as
kernel-side RSS support currently doesn't offer RSS reconfiguration.
Migrate the hash algorithm from CRC32 to Toeplitz and change the initial
hash value to 0x0 in order to match the standard Toeplitz implementation.
Provide helpers for hash key inversion required for HW operations.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
pmap_extract_and_hold() returns a vm_page_t instead of a physical page
address.
Sponsored by: The FreeBSD Foundation
Reviewed by: alc
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D31691
rmsr.r_offset now is set to rqsr.r_offset plus the number of bytes
zeroed before hitting the end-of-file. After this change rmsr.r_offset
no longer contains the EOF when the requested operation range is
completely beyond the end-of-file. Instead in such case rmsr.r_offset is
equal to rqsr.r_offset. Callers can obtain the number of bytes zeroed
by subtracting rqsr.r_offset from rmsr.r_offset.
Sponsored by: The FreeBSD Foundation
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31677
rmacklem@ spotted two things in the system call:
- Upon returning from a successful operation, vop_stddeallocate can
update rmsr.r_offset to a value greater than file size. This behavior,
although being harmless, can be confusing.
- The EINVAL return value for rqsr.r_offset + rqsr.r_len > OFF_MAX is
undocumented.
This commit has the following changes:
- vop_stddeallocate and shm_deallocate to bound the the affected area
further by the file size.
- The EINVAL case for rqsr.r_offset + rqsr.r_len > OFF_MAX is
documented.
- The fspacectl(2), vn_deallocate(9) and VOP_DEALLOCATE(9)'s return
len is explicitly documented the be the value 0, and the return offset
is restricted to be the smallest of off + len and current file size
suggested by kib@. This semantic allows callers to interact better
with potential file size growth after the call.
Sponsored by: The FreeBSD Foundation
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D31604
Introduce m_get3() which is similar to m_get2(), but can allocate up to
MJUM16BYTES bytes (m_get2() can only allocate up to MJUMPAGESIZE).
This simplifies the bpf improvement in f13da24715.
Suggested by: glebius
Differential Revision: https://reviews.freebsd.org/D31455
The sysctl man page cautions against negative-sense boolean sysctls
(foobar_disable), but it gets lost at the end of a large paragraph.
Move it to a separate paragraph in an attempt to make it more clear.
This man page could use a more holistic review and edit pass. This
change is simple and straightforward and I hope provides a small but
immediate benefit.
The macro bit_foreach() traverses all set bits in the bitstring in the
forward direction, assigning each location in turn to variable.
The macro bit_foreach_at() traverses all set bits in the bitstring in
the forward direction at or after the zero-based bit index, assigning
each location in turn to variable.
The bit_foreach_unset() and bit_foreach_unset_at() macros which
traverses unset bits are implemented for completeness.
Reviewed by: asomers, dougm
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31469
This gives any given domain a chance to indicate that it's not actually
supported on the current system. If dom_probe isn't supplied, we assume
the domain is universally applicable as most of them are. Keeping
fully-initialized and registered domains around that physically can't
work on a large majority of FreeBSD deployments is sub-optimal and leads
to errors that aren't consistent with the reality of why the socket
can't be created (e.g. ESOCKTNOSUPPORT) because such scenario has to be
caught upon pru_attach, at which point kicking back the more-appropriate
EAFNOSUPPORT would seem weird.
The initial consumer of this will be hvsock, which is only available on
HyperV guests.
Reviewed by: cem (earlier version), bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D25062
This is useful for bhyve, which otherwise has to use /dev/io to handle
accesses to I/O port BARs when PCI passthrough is in use.
Reviewed by: imp, kib
Discussed with: jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31307
The addition of ioflag allows callers passing
IO_SYNC/IO_DATASYNC/IO_DIRECT down to the file system implementation.
The vop_stddeallocate fallback implementation is updated to pass the
ioflag to the file system implementation. vn_deallocate(9) internally is
also changed to pass ioflag to the VOP_DEALLOCATE call.
Sponsored by: The FreeBSD Foundation
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D31500
This includes a style fix around ioflag checking as well.
Sponsored by: The FreeBSD Foundation
Reviewed by: kib, bcr
Differential Revision: https://reviews.freebsd.org/D31505
Add more manual pages which were not spotted previously in 0a0f748641
Ideally to be MFH'ed with:
8539518055 - Remove manpages from OLD_FILES
8b487b8292 - Fix bsd.subdir.mk-related issues after 0a0f748641f6043a6721 - ObsoleteFiles.inc: Remove manpages from OLD_FILES
0a0f748641 - man: Build manpages for all architectures
There is at least one pending issue when building with -DNO_ROOT.
Reported by: ceri@
MFH: 4 weeks
Discussed with: wosch
Differential Revision: https://reviews.freebsd.org/D31018
fspacectl(2) is a system call to provide space management support to
userspace applications. VOP_DEALLOCATE(9) is a VOP call to perform the
deallocation. vn_deallocate(9) is a public KPI for kmods' use.
The purpose of proposing a new system call, a KPI and a VOP call is to
allow bhyve or other hypervisor monitors to emulate the behavior of SCSI
UNMAP/NVMe DEALLOCATE on a plain file.
fspacectl(2) comprises of cmd and flags parameters to specify the
space management operation to be performed. Currently cmd has to be
SPACECTL_DEALLOC, and flags has to be 0.
fo_fspacectl is added to fileops.
VOP_DEALLOCATE(9) is added as a new VOP call. A trivial implementation
of VOP_DEALLOCATE(9) is provided.
Sponsored by: The FreeBSD Foundation
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D28347
This KPI is created in addition to the existing vnode_pager_setsize(9)
KPI. The KPI is intended for file systems that are able to turn a range
of file into sparse range, also known as hole-punching.
Sponsored by: The FreeBSD Foundation
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27194
It is found on boards equipped with LS1028A SoC.
802.1q VLAN grouping is supported.
An external MDIO device is used for communicating with PHYs.
The driver is built as a module by default, it is not included
in GENERIC kernel config.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30923
Comments on a pending kvmclock driver suggested adding a
malloc_aligned() to complement malloc_domainset_aligned(); add it now,
and document both.
Reviewed by: imp, kib, allanjude (manpages)
Differential Revision: https://reviews.freebsd.org/D31004
This allows the use of VLAN PCP in dhclient, which is required for
certain ISPs (such as Orange.fr).
Reviewed by: bcr (man page)
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31263
g_alloc_event will allocate storage for an opaque event. g_post_event_ep
can use memory returned by g_alloc_event to send an event from a context
that might not be able to allocate the event. Occasionally, we can
alloate memory when we create an object, but not while we're destroy
it. This allows one to allocate at creation time memory to use when
destorying the object.
Reviewed by: jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30544
Platforms may either silently handle unaligned accesses or return an
error. Atomicity is not guaranteed in this case, however.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31282
