This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
gets cleaned up upon receiving SIGINT. This un-breaks subsequent
executions of ipfwpcap and helps when debugging network/divert
issues like this:
ipfwpcap -r 6000 - | tcpdump -r -
MFC after: 1 week
with identical meaning as the colon ":". This is to support a syntax
that is more similar to a PCI device specification in the device hints
file. The selector is not fully compatible with the specification in
the hints file, since entries in that file use a different prefix,
which needs to be added to the getsel() routine, if full support of
that syntax is found to be desirable.
Approved by: re (Ken Smith)
PCI selectors with 2 or 3 elements behave exactly as before (i.e. the
domain is 0 and in the 2 element case, the function is also 0).
The form with 4 selector elements works as in the previous revision
and provides the PCI domain number as the left-most selector element.
This change allows old scripts (which used the 2 or 3 selector element
formats) to be kept. Without this patch, the 3 element form was parsed
as starting with a domain number (and the function was assumed to be 0),
with this patch, the domain is assumed to be 0 (and the last value is
used as the function number).
The man page is updated to describe the new selector semantics.
Approved by: re (Ken Smith)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.
Suggested by: jhb
Reviewed by: grehan, jhb, marcel
Approved by: re (kensmith), jhb (PCI maintainer hat)
WPA_SUPPLICANT_CFLAGS, etc. (consult the Makefile's for details)
o enable ipv6 support in hostapd (for communication w/ a radius backend)
PR: bin/116164
Submitted by: "Scot Hetzel" <swhetzel@gmail.com>
Approved by: re (gnn)
MFC after: 2 weeks
from EoL minus 6 months to EoL minus 3 months, in order to increase the odds
of there actually being a more recent release to which users can upgrade.
(In particular, for releases which are only supported for 12 months, it's
quite likely that the next release will occur between 6 and 9 months later.)
Discussed with: kensmith
Approved by: re (bmah)
MFC after: 3 days
message and then dumps core because the subsequent code assumes that
mmap() succeeded. Since rpc.statd does not have fallback code to
implement the functionality needed to operate on the status file if
it is not memory mapped, rpc.statd should use err() to force the process
to exit if the mmap() call fails.
PR: bin/115430 (mmap() failure previously fixed in statd.c 1.15)
Approved by: re (kensmith)
MFC after: 1 week
object to control the value of the new 'PRIVATE' bridge members' flag.
While here, remove stale '__unused' compiler directives.
Reviewed by: bz
Approved by: re (bmah), bz (mentor)
patching and for rolling back updates, don't copy a file if it has already
been stored. This provides a significant speedup to the "Preparing to
download files" stage of "freebsd-update fetch" if many updates have already
been applied or if a file being updated is linked many times (such as
/rescue/*).
Reported by: Paul Dekkers
MFC after: 1 week
Approved by: re (bmah)
otherwise mmap() gets called multiple times, which eventually fails due
to address space exhaustion on i386.
Approved by: re (kensmith)
MFC after: 1 week
variable bug that's hidden by the precense of the hint_acpi_0_rsdp
hint on 386 and amd64. There's never a need for such hint on ia64.
Approved by: re (kensmith)
This tool allows fine grained enabling of the debugging output in net80211 and
its useful to have it available to everyone to diagnose wifi issues.
Approved by: re (rwatson)
FreeBSD 6.2, but it didn't make it into RELENG_6_2.
Update the manual page to say "FreeBSD 6.3".
PR: docs/114429
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
MFC after: 3 days
Approved by: re (bmah)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
o unix domain socket to wpa_cli is configured w/ CONFIG_CTRL_IFACE_UNIX
o terminate on last interface option is configured w/ CONFIG_TERMINATE_ONLASTIF
o ndis/Packet32.c fixups to force roaming mode to manual
o document new mixed_cell config knob
Submitted by: thompsa (Packet32.c)
Reviewed by: thompsa, sephe
Approved by: re (hrs)
