related patches. These include:
* Mode page editting can be scripted. This involves two
things: first, if stdin is not a tty, changes are read from
stdin rather than invoking $EDITOR. Second, and more
importantly, not all modepage entries must be included in the
change set. This means that camcontrol can now gracefully handle
more intrusive editting from the $EDITOR, including removal or
rearrangement of lines. It also means that you can do stuff
like:
# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
# newfs /dev/da3
# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
* Range-checking on user-supplied input values. modeedit.c now
uses the field width specifiers to determine the maximum
allowable value for a field. If the user enters a value larger
than the maximum, it clips the value to the max and warns the
user. This also involved patching cam_cmdparse.c to be more
consistent with regards to the "count" parameter to arg_put
(previously is was the length of strings and 1 for all integral
types). The cam_cdbparse(3) man page was also updated to reflect
the revised semantics.
* In the process, I removed the 64 entry limit on mode pages (not
that we were even close to hitting that limit). This was a nice
side-effect of the other changes.
* Technically, the new mode editting functionality allows editting
of character array entries in mode pages (type 'c' or 'z'),
however since buff_encode doesn't grok them it is currently
useless.
* Camcontrol gained two new options related to mode pages: -l and
-b. The former lists all available mode pages for a given
device. The latter forces mode page display in binary format
(the default when no mode page definition was found in
scsi_modes).
* Added support for mode page names to scsi_modes. Allows names to
be displayed alongside mode numbers in the mode page
listing. Updated scsi_modes to use the new functionality. This
also adds the semicolon into the scsi_modes syntax as an
optional mode page definition terminator. This is needed to name
pages without providing a page format definition.
* Updated scsi_all.h to include a structure describing mode page
headers.
* Added $FreeBSD$ line to scsi_modes.
Inspired by: dwhite
Reviewed by: ken
Could you please enable my "state top" patches in the FreeBSD distribution.
I developped the stuff under FreeBSD, so it must be good there :-)
Here is a patch (relative to the RELENG_4 branch).
Thanks,
Frank
and emit a warning. This is a security measure since ldconfig
influences the shared libraries used by all programs.
I think the check should be made even more stringent by also
ignoring group-writable directories. I will make that change soon
unless we encounter a good reason not to do it.
Submitted by: Maxime Henrion <mhenrion@cybercable.fr>
which sets the inoinfo's i_parent and i_dotdot to 0, but they never get
set to ROOTINO. This means that propagate will never find lost+found and
its descendents, subdirectories will remain DSTATE (instead of DFOUND)
even though they *are* correctly linked in, and pass4.c will try to
clear them unsuccessfully, thinking that there is no link count from the
DSTATE directory's parent. The result is that you need to run fsck twice
and get link count increasing errors (which are unexpected and fatal
when running in preen mode). The fix is to set i_parent and i_dotdot to
"parent" after the second cacheino() call in dir.c:allocdir().
Obtained from: "Ethan Solomita" <ethan@geocast.com> (of the NetBSD Project)
Of course this is a bug in that the dhclient script will not work properly
if one has a local / and an NFS mounted /usr and needs to obtain its IP
address via DHCP before being able to mount /usr.
some reason, mboot.bootinst is not initialized to NULL at the beginning
of the program, then the last commit to this would try to free whatever
bogus address is in it.
- Restore the behavior of free()'ing the mboot.bootinst buffer after we
abuse it to determine the sector size of the disk (as clearly noted in
the comments). Properly fix the double free() bug by setting the pointer
to NULL after we free it.
* Remove the text which states only devices with minor number 1 can be used
- this is no longer true.
* Mention that dumpon(8) cannot be used to capture dumps from panics during
kernel initialization.
* /dev/wd -> /dev/ad
PR: 19848
Submitted by: Udo Erdelhoff <ue@nathan.ruhr.de>
Reviewed by: sheldonh
explicitly sets the geometry.
- Allow for MBR boot loaders that are longer than one sector. Only accept
boot loaders if their size is a multiple of the sector size, however.
This allows you to set ether addresses with 'ifconfig ether'. Also, use
some saner socket address families that allow several special case tests
to be removed.
all have zero length. A non-zero length panic's the kernel when one
of these is deleted.
PR: 19426
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: dwmalone@FreeBSD.org
effect on operation of fsck on filesystems without snapshots.
If you get compilation errors, be sure that you have copies of
/usr/include/sys/mount.h (1.94), /usr/include/sys/stat.h (1.21),
and /usr/include/ufs/ffs/fs.h (1.16) as of July 4, 2000 or later.
SYSCTL_LONG macro to be consistent with other integer sysctl variables
and require an initial value instead of assuming 0. Update several
sysctl variables to use the unsigned types.
PR: 15251
Submitted by: Kelly Yancey <kbyanc@posi.net>
with other utilities which offer similar functionality.
This change was discussed with ache, who brought in the ability to
use a dash to represent stdin in comcontrol.
delta touched the Name Description (Nd). It introduced a grammar
error and did not fix the extraneous punctuation (Nd lines are not
terminated with a period).
use the current setting for tagged queueing when deciding whether or not to
print "Tagged Queueing Enabled" instead of using the device's actual
capabilities.
This is more consistent with the rest of the transfer rate display, which
relies on current settings, and is more consistent with the way we display
things on boot.
Reported by: Gustavo Vieira Goncalves Coelho Rios <kernel@tdnet.com.br>
Reviewed by: mjacob
The first one got screwed up by me because of rev 1.33, which was
incorrectly merged into my patches by myself, and so Ruslan (maintainer)
asked me to back them out.
Ruslan was ok with the second one, but since it needs rework, it'll be
readded later, when it doesn't conflict with the backout of the first one.
Pointy hat: alex
Beer on next meeting: ru
address on an interface. This basically allows you to do what my
little setmac module/utility does via ifconfig. This involves the
following changes:
socket.h: define SIOCSIFLLADDR
if.c: add support for SIOCSIFLLADDR, which resets the values in
the arpcom struct and sockaddr_dl for the specified interface.
Note that if the interface is already up, we need to down/up
it in order to program the underlying hardware's receive filter.
ifconfig.c: add lladdr command
ifconfig.8: document lladdr command
You can now force the MAC address on any ethernet interface to be
whatever you want. (The change is not sticky across reboots of course:
we don't actually reprogram the EEPROM or anything.) Actually, you
can reprogram the MAC address on other kinds of interfaces too; this
shouldn't be ethernet-specific (though at the moment it's limited to
6 bytes of address data).
Nobody ran up to me and said "this is the politically correct way to
do this!" so I don't want to hear any complaints from people who think
I could have done it more elegantly. Consider yourselves lucky I didn't
do it by having ifconfig tread all over /dev/kmem.
It also squashes 99% of packet kiddie synflood orgies. For example, to
rate syn packets without MSS,
ipfw pipe 10 config 56Kbit/s queue 10Packets
ipfw add pipe 10 tcp from any to any in setup tcpoptions !mss
Submitted by: Richard A. Steenbergen <ras@e-gerbil.net>
This may break some scripts, but with the number of ways users can damage
a system with this tool, it's important to make sure they specify which
device they want to talk to.
Suggested by: joerg
can be viewed more easily with a pager.
Regular (i.e. short) usage output is still sent to stderr.
PR: bin/12358
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
/var/log/vinum_history. Also check that any existing history file is
a regular file.
Admonished-by: imp
Allow stopping long-running commands with ^C (well, SIGINTR).
Previously this would stop the program.
directly off the drives.
This command shows a minor problem: it requires that the device nodes
exist, whereas kernel Vinum does not. Thus dumpconfig may show no
configuration for certain drives which are up and happily running.
This is documented in the man page.
libcam/Makefile: Add scsi_da.c to libcam for the new
scsi_format_unit() function.
camcontrol.8: Update the man page for the new format
functionality, and take out the examples section
describing how to do it with 'camcontrol cmd'.
camcontrol.c: New format functionality. Note that unlike the
rest of the camcontrol subcommands, this one is
interactive by default. Because of the potential
destructiveness of the format command, I thought
it necessary to get confirmation from the user
before spamming a disk. You can disable the
interactive behavior, and the status meter with
command line arguments.
scsi_da.c: Add the new scsi_format_unit() cdb building
function and use #ifdef _KERNEL to make this file
compile in both the kernel and userland. The
format unit function is currently only defined in
the non-kernel case, because nothing in the kernel
is using it. If that changes, it should be
un-ifdefed and compiled in both cases.
scsi_da.h: New function declaration, CDB structure and format
data structures.
Thanks to Nick Hibma for providing some valuable input on these changes.
Describe -i option for start.
Update description of start command (will now work on plexes).
Update discussion of choice of stripe size (don't use power of 2).
Remove references to raw devices.
Add -i option to delay between blocks copied, to reduce performance
impact.
Remove -v option, things work now.
Rewrite parity maintenance functions.
Rebuildparity: Add -v option to check whether it was broken before
rebuilding each block.
in cases where the supplied name was already pointing to a character
special device. This fixes the breakage that occured when trying to
dump a filesystem by name (e. g. /usr), with an fstab already
mentioning the raw device name (like /dev/rda0g) where dump attempted
to use /dev/rrda0g then.
Also removed the now obsolete remark that fstab were carrying block
special names.
least one reviewer is now unhappy with, since it contains incomplete
and misleading advice that is not easy to correct.
The net effect of this commit and the previous commit is to simply
remove all discussion of setting dumpdev to catch crash dumps
prior to entering user mode.
later. This allows tunefs -p on mounted filesystems.
Side-effects:
Use K&R prototypes.
Use definitions from fcntl.h for the flags argument to open(2).
There are cosmetic differences between this and the submitted patch.
PR: 17143
Reported by: Peter Edwards <peter.edwards@ireland.com>
Submitted by: luoqi
don't support routes with sin6_scope_id set.
Without this fix, routes with IPv6 scoped addr won't work when it is
assigned by "route" command.
Approved by: jkh
Reviewed by: ume
according to draft-ietf-ipngwg-icmp-name-lookups-04 to 05 change.
This is necessary before 4.0, because,
-This change is non backword compatible
-Other KAME derived platforms applied 05
-Author of the draft said he never do backword imcompatible changes
again.
Approved by: jkh
Obtained from: KAME project
