the second kseq's run queue so that it is referenced by the kse when
it is switched out.
- Spell ksq_rslices properly.
Reported by: Ian Freislich <ianf@za.uu.net>
- Allow user adjustable min and max time slices (suggested by hiten).
- Change the SLP_RUN_MAX to 100ms from 2 seconds so that we learn whether a
process is interactive or not much more quickly.
- Place a process on the current run queue if it is interactive or if it is
running at an interrupt thread priority due to priority prop.
- Use the 'current' timeshare queue for interrupt threads, realtime threads,
and idle threads that are running at higher priority due to priority prop.
This fixes problems where priorities would have been elevated but we would
not check the timeshare run queue until other lower priority tasks were
no longer runnable.
- Keep an array of loads indexed by the priority class as well as a global
load.
- Keep an bucket of nice values with a count of the number of kses currently
runnable with that nice value.
- Keep track of the minimum nice value of any running thread.
- Remove the unused short term sleep accounting. I was attempting to use
this for load balancing but it didn't work out.
- Define a kseq_print() for use with debugging.
- Add KTR debugging at useful places so we can easily debug slice and
priority assignment.
- Decouple the runq assignment from the kseq assignment. kseq_add now keeps
track of statistics. This is done so that the nice and load is still
tracked for the currently running process. Previously if a niced process
was added while a non nice process was running the niced process would
still get a slice since it was not aware of the unnice process.
- Make adjustments for the sched api changes.
of ksegs since they primarily operation on processes.
- KSEs take ticks so pass the kse through sched_clock().
- Add a sched_class() routine that adjusts a ksegrp pri class.
- Define a sched_fork_{kse,thread,ksegrp} and sched_exit_{kse,thread,ksegrp}
that will be used to tell the scheduler about new instances of these
structures within the same process. These will be used by THR and KSE.
- Change sched_4bsd to reflect this API update.
by allprison_mtx), a unique prison/jail identifier field, two path
fields (pr_path for reporting and pr_root vnode instance) to store
the chroot() point of each jail.
o Add jail_attach(2) to allow a process to bind to an existing jail.
o Add change_root() to perform the chroot operation on a specified
vnode.
o Generalize change_dir() to accept a vnode, and move namei() calls
to callers of change_dir().
o Add a new sysctl (security.jail.list) which is a group of
struct xprison instances that represent a snapshot of active jails.
Reviewed by: rwatson, tjr
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
- Treat each class specially in kseq_{choose,add,rem}. Let the rest of the
code be less aware of scheduling classes.
- Skip the interactivity calculation for non TIMESHARE ksegrps.
- Move slice and runq selection into kseq_add(). Uninline it now that it's
big.
as it could be and can do with some more cleanup. Currently its under
options LAZY_SWITCH. What this does is avoid %cr3 reloads for short
context switches that do not involve another user process. ie: we can
take an interrupt, switch to a kthread and return to the user without
explicitly flushing the tlb. However, this isn't as exciting as it could
be, the interrupt overhead is still high and too much blocks on Giant
still. There are some debug sysctls, for stats and for an on/off switch.
The main problem with doing this has been "what if the process that you're
running on exits while we're borrowing its address space?" - in this case
we use an IPI to give it a kick when we're about to reclaim the pmap.
Its not compiled in unless you add the LAZY_SWITCH option. I want to fix a
few more things and get some more feedback before turning it on by default.
This is NOT a replacement for Bosko's lazy interrupt stuff. This was more
meant for the kthread case, while his was for interrupts. Mine helps a
little for interrupts, but his helps a lot more.
The stats are enabled with options SWTCH_OPTIM_STATS - this has been a
pseudo-option for years, I just added a bunch of stuff to it.
One non-trivial change was to select a new thread before calling
cpu_switch() in the first place. This allows us to catch the silly
case of doing a cpu_switch() to the current process. This happens
uncomfortably often. This simplifies a bit of the asm code in cpu_switch
(no longer have to call choosethread() in the middle). This has been
implemented on i386 and (thanks to jake) sparc64. The others will come
soon. This is actually seperate to the lazy switch stuff.
Glanced at by: jake, jhb
to select a KSE with a slice of 0 we will update its slice and insert it
onto the next queue.
- Pass the KSE instead of the ksegrp into sched_slice(). This more
accurately reflects the behavior of the code. Slices are granted to kses.
- Add a function kseq_nice_min() which finds the smallest nice value
assigned to the kseg of any KSE on the queue.
- Rewrite the logic in sched_slice(). Add a large comment describing the
new slice selection scheme. To summarize, slices are assigned based on
the nice value. Priorities are still calculated based on the nice and
interactivity of a process. Slice sizes of 0 may be granted for KSEs
whos nice is 20 or futher away from the lowest nice on the run queue.
Other nice values are scaled across the range [min, min+20]. This fixes
ULEs bad behavior with positively niced processes.
if (p->p_numthreads > 1) and not a flag because action is only necessary
if there are other threads. The rest of the system has no need to
identify thr threaded processes.
- In kern_thread.c use thr_exit1() instead of thread_exit() if P_THREADED
is not set.
- umtx_lock() is defined as an inline in umtx.h. It tries to do an
uncontested acquire of a lock which falls back to the _umtx_lock()
system-call if that fails.
- umtx_unlock() is also an inline which falls back to _umtx_unlock() if the
uncontested unlock fails.
- Locks are keyed off of the thr_id_t of the currently running thread which
is currently just the pointer to the 'struct thread' in kernel.
- _umtx_lock() uses the proc pointer to synchronize access to blocked thread
queues which are stored in the first blocked thread.
- sys/thr.h contains the user space visible api that is intended only for
use in threading library packages.
- kern/kern_thr.c contains thr system calls and other thr specific code.
kern_sigtimedwait() which is capable of supporting all of their semantics.
- These should be POSIX compliant but more careful review is needed before
we announce this.
a follow on commit to kern_sig.c
- signotify() now operates on a thread since unmasked pending signals are
stored in the thread.
- PS_NEEDSIGCHK moves to TDF_NEEDSIGCHK.
- Change all consumers to pass in a thread.
Right now this does not cause any functional changes but it will be important
later when signals can be delivered to specific threads.
of sf_buf_alloc() instead of expecting sf_buf_alloc()'s caller to map it.
The ultimate reason for this change is to enable two optimizations:
(1) that there never be more than one sf_buf mapping a vm_page at a time
and (2) 64-bit architectures can transparently use their 1-1 virtual
to physical mapping (e.g., "K0SEG") avoiding the overhead of pmap_qenter()
and pmap_qremove().
time a character is written. Use this at boot time to reject the
existing buffer contents if they are corrupt. This fixes a problem
seen on some hardware (especially laptops) where the message buffer
gets partially corrupted during a short power cycle or reset, but
the msgbuf structure is left intact so it gets reused, resulting
in random junk and control characters appearing in dmesg and
/var/log/messages.
PR: kern/28497
that the feature can be enabled during the boot process. Note the
continued limitation that FreeBSD fails so rapidly with this setting
enabled that it's hard to narrow down particular failures for
correction; we really need per-malloc type failure rates.
in a debugging feature causing M_NOWAIT allocations to fail at
a specified rate. This can be useful for detecting poor
handling of M_NOWAIT: the most frequent problems I've bumped
into are unconditional deference of the pointer even though
it's NULL, and hangs as a result of a lost event where memory
for the event couldn't be allocated. Two sysctls are added:
debug.malloc.failure_rate
How often to generate a failure: if set to 0 (default), this
feature is disabled. Otherwise, the frequency of failures --
I've been using 10 (one in ten mallocs fails), but other
popular settings might be much lower or much higher.
debug.malloc.failure_count
Number of times a coerced malloc failure has occurred as a
result of this feature. Useful for tracking what might have
happened and whether failures are being generated.
Useful possible additions: tying failure rate to malloc type,
printfs indicating the thread that experienced the coerced
failure.
Reviewed by: jeffr, jhb
additional flags argument to indicate blocking disposition, and
pass in M_NOWAIT from the IP reassembly code to indicate that
blocking is not OK when labeling a new IP fragment reassembly
queue. This should eliminate some of the WITNESS warnings that
have started popping up since fine-grained IP stack locking
started going in; if memory allocation fails, the creation of
the fragment queue will be aborted.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
where physical addresses larger than virtual addresses, such as i386s
with PAE.
- Use this to represent physical addresses in the MI vm system and in the
i386 pmap code. This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
detection code, and due to kvtop returning vm_paddr_t instead of u_long.
Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.
Sponsored by: DARPA, Network Associates Laboratories
Discussed with: re, phk (cdevsw change)
flexible process_fork, process_exec, and process_exit eventhandlers. This
reduces code duplication and also means that I don't have to go duplicate
the eventhandler locking three more times for each of at_fork, at_exec, and
at_exit.
Reviewed by: phk, jake, almost complete silence on arch@
is set to 0, it now has the same affect as setting witness_dead used to
have.
- Added a sysctl handler that allows root to change witness_watch from a
non-zero value to zero to disable witness at runtime. Note that you
can't turn witness back on once it is off. You can only turn it off as
a one-way switch.
- Added a comment describing the possible values of witness_watch.
kse_mailbox to schedule an upcall, this is useful for userland timeout
routine, for example pthread_cond_timedwait().
Also extract upcall scheduling code from kse_reassign and create
a new function called thread_switchout to include these code.
Reviewed by: julain
the devstat is for an "interior" GEOM node and register using the
name argument as a geom identity pointer. Do not put these devstat
structures on the list returned by the sysctl.
This gives us the ability to tell the two kinds of nodes apart and
leave the current "strictly physical" view of devstat intact without
modifications, yet be able to use devstat for both kinds of devices.
It also saves us bloating struct devstat with another 48 bytes of
space for the name. At least for now.
Reviewed by: ken
Add a mutex and protect the allocation and traversal of the list with it.
When we allocate a page for devstat use we drop the mutex and use
M_WAITOK this is not nice, but under the given circumstances the
best we can do.
In the sysctl handler for returning the devstat entries we do not want to
hold the mutex across copyout(9) calls, so we keep a very careful eye on
the devstat_generation count, and abandon with EBUSY if it changes under
our feet.
Specifically test for BIO_WRITE, rather than default non-read,non-deletes
as write. Make the default be DEVSTAT_NO_DATA.
Add atomic increments of the sequence[01] fields so applications using the
mmap'ed view stand a chance of detecting updates in progress.
Reviewed by: ken
but I decided that it was important for this patch to not bit-rot, and
since it is mainly moving code around, the total amount of entropy is
epsilon /phk)
This is a patch to move the common parts of linux_getcwd() back into
kern/vfs_cache.c so that the standard FreeBSD libc getcwd() can use it's
extended functionality. The linux syscall linux_getcwd() in
compat/linux/linux_getcwd.c has been rewritten to use it too. It should
be possible to simplify libc's getcwd() after this. No doubt this code
needs some cleaning up, since I've left in the sysctl variables I used
for debugging.
PR: 48169
Submitted by: James Whitwell <abacau@yahoo.com.au>
Kernel:
Change statistics to use the *uptime() timescale (ie: relative to
boottime) rather than the UTC aligned timescale. This makes the
device statistics code oblivious to clock steps.
Change timestamps to bintime format, they are cheaper.
Remove the "busy_count", and replace it with two counter fields:
"start_count" and "end_count", which are updated in the down and
up paths respectively. This removes the locking constraint on
devstat.
Add a timestamp argument to devstat_start_transaction(), this will
normally be a timestamp set by the *_bio() function in bp->bio_t0.
Use this field to calculate duration of I/O operations.
Add two timestamp arguments to devstat_end_transaction(), one is
the current time, a NULL pointer means "take timestamp yourself",
the other is the timestamp of when this transaction started (see
above).
Change calculation of busy_time to operate on "the salami principle":
Only when we are idle, which we can determine by the start+end
counts being identical, do we update the "busy_from" field in the
down path. In the up path we accumulate the timeslice in busy_time
and update busy_from.
Change the byte_* and num_* fields into two arrays: bytes[] and
operations[].
Userland:
Change the misleading "busy_time" name to be called "snap_time" and
make the time long double since that is what most users need anyway,
fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same
timescale as the kernel fields.
Change devstat_compute_etime() to operate on struct bintime.
Remove the version 2 legacy interface: the change to bintime makes
compatibility far too expensive.
Fix a bug in systat's "vm" page where boot relative busy times would
be bogus.
Bump __FreeBSD_version to 500107
Review & Collaboration by: ken
KTRFAC_DROP to track instances when ktrace events are dropped due to the
request pool being exhausted. When a thread tries to post a ktrace event
and is unable to due to no available ktrace request objects, it sets
KTRFAC_DROP in its process' p_traceflag field. The next trace event to
successfully post from that process will set the KTR_DROP flag in the
header of the request going out and clear KTRFAC_DROP.
The KTR_DROP flag is the high bit in the type field of the ktr_header
structure. Older kdump binaries will simply complain about an unknown type
when seeing an entry with KTR_DROP set. Note that KTR_DROP being set on a
record in a ktrace file does not tell you anything except that at least one
event from this process was dropped prior to this event. The user has no
way of knowing what types of events were dropped nor how many were dropped.
Requested by: phk
struct proc as p_tracecred alongside the current cache of the vnode in
p_tracep. This credential is then used for all later ktrace operations on
this file rather than using the credential of the current thread at the
time of each ktrace event.
- Now that we have multiple ktrace-related items in struct proc that are
pointers, rename p_tracep to p_tracevp to make it less ambiguous.
Requested by: rwatson (1)
- Create a new function bdone() which sets B_DONE and calls wakup(bp). This
is suitable for use as b_iodone for buf consumers who are not going
through the buf cache.
- Create a new function bwait() which waits for the buf to be done at a set
priority and with a specific wmesg.
- Replace several cases where the above functionality was implemented
without locking with the new functions.
possible for some time.
- Lock the buf before accessing fields. This should very rarely be locked.
- Assert that B_DELWRI is set after we acquire the buf. This should always
be the case now.
requiring locked bufs in vfs_bio_awrite(). Previously the buf could
have been written out by fsync before we acquired the buf lock if it
weren't for giant. The cluster_wbuild() handles this race properly but
the single write at the end of vfs_bio_awrite() would not.
- Modify flushbufqueues() so there is only one copy of the loop. Pass a
parameter in that says whether or not we should sync bufs with deps.
- Call flushbufqueues() a second time and then break if we couldn't find
any bufs without deps.
than a MAXPHYS size block ahead. Having this set too high just leaves
other processes starved for IO and screws up interactive response. Let the
users with RAID set it higher when they need it.
- If SYSCTL_OUT() fails in sysctl_kern_proc_args(), return the error
instead of ignoring it if we have new arguments for the process.
- If the new arguments for a process are too long, return ENOMEM instead of
returning success but not doing the actual copy.
Submitted by: bde
hold hold it across the check to avoid extra lock operations in the
common case.
- Copy in the new args to a temporary pargs structure before we drop the
reference to the old one. Thus, if the copyin() fails, the process
arguments are unchanged rather than being deleted. Also, p_args is no
longer NULL during the sysctl operation.
it from its pgrp to avoid leaving zombies around with p_pgrp == NULL.
This bug was apparent as a NULL-dereference in the pid selection code
in fork1().
closely what function is really doing. Update all existing consumers
to use the new name.
Introduce a new vfs_stdsync function, which iterates over mount
point's vnodes and call FSYNC on each one of them in turn.
Make nwfs and smbfs use this new function instead of rolling their
own identical sync implementations.
Reviewed by: jeff
a parameter instead of using the level of a given witness. When
recursing, pass an indent level of indent + 1.
- Make use of the information witness_levelall() provides in
witness_display_list() to use an O(n) algorithm instead of an O(n^2)
algo to decide which witnesses to display hierarchies from. Basically,
we only display a hierarchy for witnesses with a level of 0.
- Add a new per-witness flag that is reset at the start of
witness_display() for all witness's and is set the first time a witness
is displayed in witness_displaydescendants(). If a witness is
encountered more than once in the lock order tree (which happens often),
witness_displaydescendants() marks the later occurrences with the string
"(already displayed)" and doesn't display the subtree under that
witness. This avoids duplicating large amounts of the lock order tree
in the 'show witness' output in DDB.
All these changes serve to make 'show witness' a lot more readable and
useful than it was previously.
adds a witness to the child list of a parent witness. rebalancetree()
runs through the entire tree removing direct descendants of witnesses
who already have said child witness as an indirect descendant through
another direct descendant. itismychild() now calls insertchild()
followed by rebalancetree() and no longer needs the evil hack of
having static recursed variable.
- Add a function reparentchildren() that adds all the direct descendants
of one witness as direct descendants of another witness.
- Change the return value of itismychild() and similar functions so that
they return 0 in the case of failure due to lack of resources instead
of 1. This makes the return value more intuitive.
- Check the return value of itismychild() when defining the static lock
order in witness_initialize().
- Don't try to setup a lock instance in witness_lock() if itismychild()
fails. Witness is hosed anyways so no need to do any more witness
related activity at that point. It also makes the code flow easier to
understand.
- Add a new depart() function as the opposite of enroll(). When the
reference count of a witness drops to 0 in witness_destroy(), this
function is called on that witness. First, it runs through the
lock order tree using reparentchildren() to reparent direct descendants
of the departing witness to each of the witness' parents in the tree.
Next, it releases it's own child list and other associated resources.
Finally it calls rebalanacetree() to rebalance the lock order tree.
- Sort function prototypes into something closer to alphabetical order.
As a result of these changes, there should no longer be 'dead' witnesses
in the order tree, and repeatedly loading and unloading a module should no
longer exhaust witness of its internal resources.
Inspired by: gallatin
recursing on a lock instead of before. This fixes a bug where WITNESS
could get a little confused if you did an sx_tryslock() on a sx lock that
you already had an slock on. WITNESS would still function correctly but
it could result in weirdness in the output of 'show locks'. This also
makes it possible for mtx_trylock() to recurse on a lock.
used popped into my head during my morning commute a few weeks ago, but
it is also very similar (though a bit simpler) to a patch that mini@
developed a while ago. Basically, each eventhandler list has a mutex and
a run count. During an eventhandler invocation, the mutex is held while
we traverse the list but is dropped while we execute actual handlers. Also,
a runcount counter is incremented at the start of an invocation and
decremented at the end of an invocation. Adding to the list is not a big
deal since the reference of a thread currently executing the handlers
remains valid across an add operation. Whether or not new handlers are
executed by threads currently executing the handlers for a given list is
indeterminate however. The harder case is when a handler is removed from
the list. If the runcount is zero, the handler is simply removed from the
list directly. If the runcount is not zero, then another thread is
currently executing the handlers of this list, so the priority of this
handler is set to a magic value (currently -1) to mark it as dead. Dead
handlers are not executed during an invocation. If the runcount is zero
after it is decremented at the end of an invocation, then a new
eventhandler_prune_list() function is called to remove dead handlers from
the list.
Additional minor notes:
- All the common parts of EVENTHANDLER_INVOKE() and
EVENTHANDLER_FAST_INVOKE() have been merged into a common
_EVENTHANDLER_INVOKE() macro to reduce duplication and ease maintenance.
- KTR logging for eventhandlers is now available via the KTR_EVH mask.
- The global eventhander_mutex is no longer recursive.
Tested by: scottl (SMP i386)
- Issue the io that we will later block on prior to doing cluster read ahead
so that it is more likely to be ready when we block.
- Loop issuing clustered reads until we've exhausted the seq count supplied
by the file system.
- Use a sysctl tunable "vfs.read_max" to determine the maximum number of
blocks that we'll read ahead.
I had commented the #ifdef INVARIANTS checks out to make sure I ran this
code in all kernels and forgot to comment the #ifdefs back in before I
committed.
Spotted by: bmilekic
[1] PHCC = Pointy Hat Correction Commit
ddb 'show locks' command. Thus, move witness_list() to the #ifdef DDB
section and remove extra checks for calling this function outside of
DDB. Also, witness_list() now returns void instead of returning an int.
Reported by: Steve Ames <steve@energistic.com>
Prodded by: davidxu
Remove an incorrect comment. (Incrementing an object's reference count
does not prevent a process from exiting. The real concern here is that the
physical page must not be deleted until transmission is complete. That is
already handled by the VM system and sf_buf_free().)
Tested by: ken
is more robust and prevents the hijacking of /dev/console for the typical
mistake.
Remove unneeded MAJOR_AUTO uses, it is only needed explicitly now if the
driver source has cross-branch compatibility to old releases.
the device statistics structures into userland instead of using sysctl.
Introduce new devstat_new_entry() function which allocates the devstat
structure an calls devstat_add_entry() on it.
- On receive, vm_map_lookup() needs to trigger the creation of a shadow
object. To make that happen, call vm_map_lookup() with PROT_WRITE
instead of PROT_READ in vm_pgmoveco().
- On send, a shadow object will be created by the vm_map_lookup() in
vm_fault(), but vm_page_cowfault() will delete the original page from
the backing object rather than simply letting the legacy COW mechanism
take over. In other words, the new page should be added to the shadow
object rather than replacing the old page in the backing object. (i.e.
vm_page_cowfault() should not be called in this case.) We accomplish
this by making sure fs.object == fs.first_object before calling
vm_page_cowfault() in vm_fault().
Submitted by: gallatin, alc
Tested by: ken
witness. Sleepable locks such as sx locks always come before all mutexes
including Giant. However, the static lock order list placed Giant before
the proctree and allproc sx locks. This resulted in witness creating a
cycle in its lock order "tree" (real trees don't have cycles) leading to
infinite recursion and eventually a double fault. To fix, put Giant after
sx locks in the lock order list.
check, mac_check_sysarch_ioperm(), permitting MAC security policy
modules to control access to these interfaces. Currently, they
protect access to IOPL on i386, and setting HAE on Alpha.
Additional checks might be required on other platforms to prevent
bypass of kernel security protections by unauthorized processes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
modules to authorize disabling of swap against a particular vnode.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
before the MAC check so that we pass the flags field into the MAC
check properly initialized. This didn't affect any current MAC
modules since they didn't care what the flags argument was (as
they were primarily interested in the fact that it was a meta-data
write, not the contents of the write), but would be relevant to
future modules relying on that field.
Submitted by: Mike Halderman <mrh@spawar.navy.mil>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
drain routines are done by swi_net, which allows for better queue control
at some future point. Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.
Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
- Use gbincore() and not incore() so that we can drop the vnode interlock
as we acquire the buflock.
- Use GB_LOCK_NOWAIT when getting bufs for read ahead clusters so that we
don't block on locked bufs.
- Convert a while loop to a howmany() that will most likely be faster on
modern processors. There is another while loop divide that was left
near by because it is operating on a 64bit int and is most likely faster.
- Cleanup the cluster_read() code a little to get rid of a goto and make
the logic clearer.
Tested on: x86, alpha
Tested by: Steve Kargl <sgk@troutmask.apl.washington.edu>
Reviewd by: arch
already own. The mtx_trylock() will fail however. Enhance the comment
at the top of the try lock function to explain this.
Requested by: jlemon and his evil netisr locking
