follows: the effective uid of p1 (subject) must equal the real, saved,
and effective uids of p2 (object), p2 must not have undergone a
credential downgrade. A subject with appropriate privilege may override
these protections.
In the future, we will extend these checks to require that p1 effective
group membership must be a superset of p2 effective group membership.
Obtained from: TrustedBSD Project
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
modify the scheduling properties of processes with a different real
uid but the same effective uid (i.e., daemons, et al). (note: these
cases were previously commented out, so this does not change the
compiled code at al)
Obtained from: TrustedBSD Project
semantics don't: in practice, both policy and semantics permit
loop-back debugging operations, only it's just a subset of debugging
operations (i.e., a proc can open its own /dev/mem), and that's at a
higher layer.
and non-P_SUGID cases, simplify p_cansignal() logic so that the
P_SUGID masking of possible signals is independent from uid checks,
removing redundant code and generally improving readability.
Reviewed by: tmm
Obtained from: TrustedBSD Project
the ability of unprivileged processes to deliver arbitrary signals
to daemons temporarily taking on unprivileged effective credentials
when P_SUGID is not set on the target process:
Removed:
(p1->p_cred->cr_ruid != ps->p_cred->cr_uid)
(p1->p_ucred->cr_uid != ps->p_cred->cr_uid)
o Replace two "allow this" exceptions in p_cansignal() restricting
the ability of unprivileged processes to deliver arbitrary signals
to daemons temporarily taking on unprivileged effective credentials
when P_SUGID is set on the target process:
Replaced:
(p1->p_cred->p_ruid != p2->p_ucred->cr_uid)
(p1->p_cred->cr_uid != p2->p_ucred->cr_uid)
With:
(p1->p_cred->p_ruid != p2->p_ucred->p_svuid)
(p1->p_ucred->cr_uid != p2->p_ucred->p_svuid)
o These changes have the effect of making the uid-based handling of
both P_SUGID and non-P_SUGID signal delivery consistent, following
these four general cases:
p1's ruid equals p2's ruid
p1's euid equals p2's ruid
p1's ruid equals p2's svuid
p1's euid equals p2's svuid
The P_SUGID and non-P_SUGID cases can now be largely collapsed,
and I'll commit this in a few days if no immediate problems are
encountered with this set of changes.
o These changes remove a number of warning cases identified by the
proc_to_proc inter-process authorization regression test.
o As these are new restrictions, we'll have to watch out carefully for
possible side effects on running code: they seem reasonable to me,
but it's possible this change might have to be backed out if problems
are experienced.
Submitted by: src/tools/regression/security/proc_to_proc/testuid
Reviewed by: tmm
Obtained from: TrustedBSD Project
ability of unprivileged processes to modify the scheduling properties
of daemons temporarily taking on unprivileged effective credentials.
These cases (p1->p_cred->p_ruid == p2->p_ucred->cr_uid) and
(p1->p_ucred->cr_uid == p2->p_ucred->cr_uid), respectively permitting
a subject process to influence the scheduling of a daemon if the subject
process has the same real uid or effective uid as the daemon's effective
uid. This removes a number of the warning cases identified by the
proc_to_proc iner-process authorization regression test.
o As these are new restrictions, we'll have to watch out carefully for
possible side effects on running code: they seem reasonable to me,
but it's possible this change might have to be backed out if problems
are experienced.
Reported by: src/tools/regression/security/proc_to_proc/testuid
Obtained from: TrustedBSD Project
p_can(...P_CAN_SEE...) to getpgid(), getsid(), and setpgid(),
blocking these operations on processes that should not be visible
by the requesting process. Required to reduce information leakage
in MAC environments.
Obtained from: TrustedBSD Project
from signal authorization checking.
o p_cansignal() takes three arguments: subject process, object process,
and signal number, unlike p_cankill(), which only took into account
the processes and not the signal number, improving the abstraction
such that CANSIGNAL() from kern_sig.c can now also be eliminated;
previously CANSIGNAL() special-cased the handling of SIGCONT based
on process session. privused is now deprecated.
o The new p_cansignal() further limits the set of signals that may
be delivered to processes with P_SUGID set, and restructures the
access control check to allow it to be extended more easily.
o These changes take into account work done by the OpenBSD Project,
as well as by Robert Watson and Thomas Moestl on the TrustedBSD
Project.
Obtained from: TrustedBSD Project
toggle the P_SUGID bit explicitly, rather than relying on it being
set implicitly by other protection and credential logic. This feature
is introduced to support inter-process authorization regression testing
by simplifying userland credential management allowing the easy
isolation and reproduction of authorization events with specific
security contexts. This feature is enabled only by "options REGRESSION"
and is not intended to be used by applications. While the feature is
not known to introduce security vulnerabilities, it does allow
processes to enter previously inaccessible parts of the credential
state machine, and is therefore disabled by default. It may not
constitute a risk, and therefore in the future pending further analysis
(and appropriate need) may become a published interface.
Obtained from: TrustedBSD Project
ps_showallprocs such that if superuser is present to override process
hiding, the search falls through [to success]. When additional
restrictions are placed on process visibility, such as MAC, new clauses
will be placed above the return(0).
Obtained from: TrustedBSD Project
two subject ucreds. Unlike p_cansee(), u_cansee() doesn't have
process lock requirements, only valid ucred reference requirements,
so is prefered as process locking improves. For now, back p_cansee()
into u_cansee(), but eventually p_cansee() will go away.
Reviewed by: jhb, tmm
Obtained from: TrustedBSD Project
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
1) mpsafe (protect the refcount with a mutex).
2) reduce duplicated code by removing the inlined crdup() from crcopy()
and make crcopy() call crdup().
3) use M_ZERO flag when allocating initial structs instead of calling bzero
after allocation.
4) expand the size of the refcount from a u_short to an u_int, by using
shorts we might have an overflow.
Glanced at by: jake
could debug processes after the commit that introduced the typo.
Security is good, but security is not always the same as turning things
off :-).
PR: kern/22711
Obtained from: brooks@one-eyed-alien.net
in the p_candebug() function. Synchronize with sef's CHECKIO()
macro from the old procfs, which seems to be a good source of security
checks.
Obtained from: TrustedBSD Project
chgsbsize(), which are called rather frequently and may be called from an
interrupt context in the case of chgsbsize(). Instead, do the hash table
lookup and maintenance when credentials are changed, which is a lot less
frequent. Add pointers to the uidinfo structures to the ucred and pcred
structures for fast access. Pass a pointer to the credential to chgproccnt()
and chgsbsize() instead of passing the uid. Add a reference count to the
uidinfo structure and use it to decide when to free the structure rather
than freeing the structure when the resource consumption drops to zero.
Move the resource tracking code from kern_proc.c to kern_resource.c. Move
some duplicate code sequences in kern_prot.c to separate helper functions.
Change KASSERTs in this code to unconditional tests and calls to panic().
kern.ps_showallprocs. Apparently got lost in the merge process from
the capability patches. Now fixed.
Submitted by: jdp
Obtained from: TrustedBSD Project
int p_can(p1, p2, operation, privused)
which allows specification of subject process, object process,
inter-process operation, and an optional call-by-reference privused
flag, allowing the caller to determine if privilege was required
for the call to succeed. This allows jail, kern.ps_showallprocs and
regular credential-based interaction checks to occur in one block of
code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL,
and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a
series of static function checks in kern_prot, which should not
be invoked directly.
o Commented out capabilities entries are included for some checks.
o Update most inter-process authorization to make use of p_can() instead
of manual checks, PRISON_CHECK(), P_TRESPASS(), and
kern.ps_showallprocs.
o Modify suser{,_xxx} to use const arguments, as it no longer modifies
process flags due to the disabling of ASU.
o Modify some checks/errors in procfs so that ENOENT is returned instead
of ESRCH, further improving concealment of processes that should not
be visible to other processes. Also introduce new access checks to
improve hiding of processes for procfs_lookup(), procfs_getattr(),
procfs_readdir(). Correct a bug reported by bp concerning not
handling the CREATE case in procfs_lookup(). Remove volatile flag in
procfs that caused apparently spurious qualifier warnigns (approved by
bde).
o Add comment noting that ktrace() has not been updated, as its access
control checks are different from ptrace(), whereas they should
probably be the same. Further discussion should happen on this topic.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
time being, the ASU accounting flag will no longer be available, but
may be reinstituted in the future once authorization have been redone.
As it is, the kernel went through contortions in access control to
avoid calling suser, which always set the flag. This will also allow
suser to accept const struct *{cred, proc} arguments.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
1) while allocating a uidinfo struct malloc is called with M_WAITOK,
it's possible that while asleep another process by the same user
could have woken up earlier and inserted an entry into the uid
hash table. Having redundant entries causes inconsistancies that
we can't handle.
fix: do a non-waiting malloc, and if that fails then do a blocking
malloc, after waking up check that no one else has inserted an entry
for us already.
2) Because many checks for sbsize were done as "test then set" in a non
atomic manner it was possible to exceed the limits put up via races.
fix: instead of querying the count then setting, we just attempt to
set the count and leave it up to the function to return success or
failure.
3) The uidinfo code was inlining and repeating, lookups and insertions
and deletions needed to be in their own functions for clarity.
Reviewed by: green
kern_prot, which cleans up some namespace issues
o Don't need a special handler to limit un-setting, as suser is used to
protect suser_permitted, making it one-way by definition.
Suggested by: bde
returning anything but EPERM.
o suser is enabled by default; once disabled, cannot be reenabled
o To be used in alternative security models where uid0 does not connote
additional privileges
o Should be noted that uid0 still has some additional powers as it
owns many important files and executables, so suffers from the same
fundamental security flaws as securelevels. This is fixed with
MAC integrity protection code (in progress)
o Not safe for consumption unless you are *really* sure you don't want
things like shutdown to work, et al :-)
Obtained from: TrustedBSD Project
syscall path inward. A system call may select whether it needs the MP
lock or not (the default being that it does need it).
A great deal of conditional SMP code for various deadended experiments
has been removed. 'cil' and 'cml' have been removed entirely, and the
locking around the cpl has been removed. The conditional
separately-locked fast-interrupt code has been removed, meaning that
interrupts must hold the CPL now (but they pretty much had to anyway).
Another reason for doing this is that the original separate-lock for
interrupts just doesn't apply to the interrupt thread mechanism being
contemplated.
Modifications to the cpl may now ONLY occur while holding the MP
lock. For example, if an otherwise MP safe syscall needs to mess with
the cpl, it must hold the MP lock for the duration and must (as usual)
save/restore the cpl in a nested fashion.
This is precursor work for the real meat coming later: avoiding having
to hold the MP lock for common syscalls and I/O's and interrupt threads.
It is expected that the spl mechanisms and new interrupt threading
mechanisms will be able to run in tandem, allowing a slow piecemeal
transition to occur.
This patch should result in a moderate performance improvement due to
the considerable amount of code that has been removed from the critical
path, especially the simplification of the spl*() calls. The real
performance gains will come later.
Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
my tree for ages (~2 years) waiting for an excuse to commit it. Now Linux
has implemented it and it seems that Staroffice (when using the
linux_base6.1 port's libc) calls this in the linux emulator and dies in
setup. The Linux emulator can call these now.
to wake up any processes waiting via PIOCWAIT on process exit, and truss
needs to be more aware that a process may actually disappear while it's
waiting.
Reviewed by: Paul Saab <ps@yahoo-inc.com>
login (or not if root)
then exit the shell
truss will get stuct in tsleep
I dont know if this is correct, but it fixes the problem and
according to the commends in pioctl.h, PF_ISUGID is set when we
want to ignore UID changes.
The code is checking for when PF_ISUGID is not set and since it
never is set, we always ignore UID changes.
Submitted by: Paul Saab <ps@yahoo-inc.com>
p_trespass(struct proc *p1, struct proc *p2)
which returns zero or an errno depending on the legality of p1 trespassing
on p2.
Replace kern_sig.c:CANSIGNAL() with call to p_trespass() and one
extra signal related check.
Replace procfs.h:CHECKIO() macros with calls to p_trespass().
Only show command lines to process which can trespass on the target
process.
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
dereference a NULL pointer, causing a panic. Instead of following
s_leader to find the session id, store it in the session structure.
Jukka found the following info:
BTW - I just found what I have been looking for. Std 1003.1
Part 1: SYSTEM API [C LANGUAGE] section 2.2.2.80 states quite
explicitly...
Session lifetime: The period between when a session is created
and the end of lifetime of all the process groups that remain
as members of the session.
So, this quite clearly tells that while there is any single
process in any process group which is a member of the session,
the session remains as an independent entity.
Reviewed by: peter
Submitted by: "Jukka A. Ukkonen" <jau@jau.tmt.tele.fi>
